2 foot contours (2008) provided as geodatabase. This dataset contains locations and attributes of 2-ft interval topography data, created as part of the DC Geographic Information System (DC GIS) for the D.C. Office of the Chief Technology Officer (OCTO) and participating D.C. government agencies. In addition to the 2-ft contour data ancillary datasets containing an ESRI geodatabase of masspoints and breaklines.

0.6 meter contours. This dataset contains locations and attributes of 0.6 meter (1.9685 feet) interval topography data, created using bare earth points from the lidar point cloud data.Voids exist in the data due to data redaction conducted under the guidance of the United States Secret Service. All lidar data returns and collected data were removed from the dataset based on the redaction footprint shapefile generated in 2017.

This layer is a component of Elevation_WebMercator.

Provided by the Office of the Chief Technology Officer

© Office of the Chief Technology Officer (OCTO)

This dataset was created to support the Washington D.C. StreamStats project funded by the Washington D.C. Department of Energy and Environment (DOEE). The dataset contains digital elevation model (DEM), flow direction and catchment layers that were conditioned using Washingtons D.C.’s stormwater network layer. The data are hosted online as a component of the USGS StreamStats web application (https://streamstats.usgs.gov), where users can interact with a map of Washington D.C.’s stormwater pipe system and National Hydrography Dataset (NHD) “best resolution” blue lines to delineate drainage basins that account for pipe flow. This project utilized 1-meter (high resolution) terrain products, which improves upon existing 10 meter resolution data products traditionally used in StreamStats. Following work completed for Boston’s Mystic River Basin, Washington, D.C. is the second jurisdiction to incorporate storm-drain-network data into StreamStats. The pipe-network-informed hydro-geomorp ...

This map features a detailed basemap for Washington, DC, including buildings and landmarks in the District. The basemap includes coverage down to about 1:1,000 for the full District of Columbia.The map is based on data from the DC Geographic Information Systems Program (DC GIS). The mission of the DC GIS is to improve the quality and lower the cost of services provided by the DC government, through the District's collective investment and effective application of geospatial data and systems.The map is authored using the World Topographic Map Template for Large Scales. Washington, DC is one of the featured areas of the World Topographic Map. The World Topographic Map includes detailed maps for several cities and areas around the United States.

0.6 meter contours. This dataset contains locations and attributes of 0.6 meter interval topography data, created using bare earth points from the lidar point cloud data.Voids exist in the data due to data redaction conducted under the guidance of the United States Secret Service. All lidar data returns and collected data were removed from the dataset based on the redaction footprint shapefile generated in 2017.

0.6 meter contours. This dataset contains locations and attributes of 0.6 meter interval topography data, created using bare earth points from the lidar point cloud data. Some areas have limited data. The lidar dataset redaction was conducted under the guidance of the United States Secret Service. Except for classified ground points and classified water points, all lidar data returns and collected data were removed from the dataset within the United States Secret Service 1m redaction boundary generated for the 2017 orthophoto flight

Topographic map on a scale of 1: 10,000 in the 1992 layout is a graphical map (in colour). It shows the shape and cover of the land (including water, vegetation, settlements, roads and a number of other objects). Topographical maps are the primary source of information about the geographical environment.

The topographic maps referred to as the Issue State (AS) were primarily intended for military use and were classified as Confidential Classified. On a scale of 1: 25,000 there were 2 output variants: TK=topographic maps and TSP=topographic city maps.

The topographic maps referred to as the Issue State (AS) were primarily intended for military use and were classified as Confidential Classified. On a scale of 1: 25,000 there were 2 output variants: TK=topographic maps and TSP=topographic city maps.

These are military topographic maps (scale 1:25,000) from the years 1944, series GSGS 4427 and GSGS 4414 (GSGS = Geographical Section General Staff). During the Second World War, maps of strategically located areas in the occupied territories were produced on the initiative of the American Army Map Service (AMS) in Washington DC and the British War Office in London. The work of the military services includes maps of cities and map series of France, Belgium and the Netherlands, among others. This includes the map series "Holland, 1:25.000" which was known to the Americans under the code AMS M831 and to the British under the code GSGS 4427. The 215 sheets in series GSGS 4427 contain most of the Netherlands, and were published in 1943. , 1944 or 1945 printed. From series GSGS 4414 there are 263 maps of the eastern part of the Netherlands and a large part of Germany. Older sheets available in Washington DC and London were used to make the maps. Sometimes it was even necessary to refer to information printed by the Dutch Topographical Service from the end of the nineteenth century. If the Allies had more recent magazines, they were of course used. In most cases, information was taken from map sheets from the 1920s and 1930s. In addition, information was also taken from, for example, Michelin maps and map sheets of the Koninklijke Nederlandsche Automobiel Club (KNAC).

The topographic maps referred to as the Issue State (AS) were primarily intended for military use and were classified as Confidential Classified. On a scale of 1: 25,000 there were 2 output variants: TK=topographic maps and TSP=topographic city maps.

The topographic maps referred to as the Issue State (AS) were primarily intended for military use and were classified as Confidential Classified. On a scale of 1: 25,000 there were 2 output variants: TK=topographic maps and TSP=topographic city maps.

The topographical maps, referred to as the issuing State (AS), were primarily for military purposes and carried the classification level of Confidential classified information. In scale 1: There were 25,000 output variants: TK=topographic maps and TSP=topographic city maps.

Elevation captured in 1999. Contract NCPC 93-02. This document describes the planimetric map production for the 350 tiles located in Washington DC and the surrounding states of MD and VA.

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.

0.6 meter contours. This dataset contains locations and attributes of 0.6 meter (1.9685 feet) interval topography data, created using bare earth points from the lidar point cloud data.Voids exist in the data due to data redaction conducted under the guidance of the United States Secret Service. All lidar data returns and collected data were removed from the dataset based on the redaction footprint shapefile generated in 2017.

The topographical maps, referred to as the issuing State (AS), were primarily for military purposes and carried the classification level of Confidential classified information. In scale 1: There were 25,000 output variants: TK=topographic maps and TSP=topographic city maps.

The topographical maps, referred to as the issuing State (AS), were primarily for military purposes and carried the classification level of Confidential classified information. In scale 1: There were 25,000 output variants: TK=topographic maps and TSP=topographic city maps.

Mass Points (2008). The dataset contains DTM masspoints derived photogrammetrically to support 2’ contours. Masspoints and breaklines were compiled from Spring 2008 aerial photography using softcopy photogrammetric techniques. Masspoint elevations are in based on NAVD US feet. Masspoints and breaklines were compiled to support generation of a TIN and the subsequent processing of 2’ contours.