This dataset contains gridded human population with a spatial resolution of 1 km x 1 km for the UK based on Census 2021 (Census 2022 for Scotland) and Land Cover Map 2021 input data. Data on population distribution for the United Kingdom is available from statistical offices in England, Wales, Northern Ireland and Scotland and provided to the public e.g. via the Office for National Statistics (ONS). Population data is typically provided in tabular form or, based on a range of different geographical units, in file types for geographical information systems (GIS), for instance as ESRI Shapefiles. The geographical units reflect administrative boundaries at different levels of detail, from Devolved Administration to Output Areas (OA), wards or intermediate geographies. While the presentation of data on the level of these geographical units is useful for statistical purposes, accounting for spatial variability for instance of environmental determinants of public health requires a more spatially homogeneous population distribution. For this purpose, the dataset presented here combines 2021/2022 UK Census population data on Output Area level with Land Cover Map 2021 land-use classes 'urban' and 'suburban' to create a consistent and comprehensive gridded population data product at 1 km x 1 km spatial resolution. The mapping product is based on British National Grid (OSGB36 datum).

THIS DATASET HAS BEEN WITHDRAWN and superseded by UK Gridded Population 2011 based on Census 2011 and Land Cover Map 2015 (https://catalogue.ceh.ac.uk/id/0995e94d-6d42-40c1-8ed4-5090d82471e1). This dataset contains gridded population with a spatial resolution of 1 km x 1 km for the UK based on Census 2011 and Land Cover Map 2007 input data. Data on population distribution for the United Kingdom is available from statistical offices in England, Wales, Northern Ireland and Scotland and provided to the public e.g. via the Office for National Statistics (ONS). Population data is typically provided in tabular form or, based on a range of different geographical units, in file types for geographical information systems (GIS), for instance as ESRI Shapefiles. The geographical units reflect administrative boundaries at different levels of detail, from Devolved Administration to Output Areas (OA), wards or intermediate geographies . While the presentation of data on the level of these geographical units is useful for statistical purposes, accounting for spatial variability for instance of environmental determinants of public health requires a more spatially homogeneous population distribution. For this purpose, the dataset presented here combines 2011 UK Census population data on Output Area level with Land Cover Map 2007 land-use classes 'urban' and 'suburban' to create a consistent and comprehensive gridded population data product at 1 km x 1 km spatial resolution. The mapping product is based on British National Grid (OSGB36 datum).

Office for National Statistics’ national and subnational total mid-year population estimates for England and Wales for a selection of administrative and census areas by sex for 2012 to 2020. The data is source is from ONS Population Estimates. Find out more about this dataset here.

This data is issued at (BGC) Generalised (20m) boundary type for:

Country, Region, Upper Tier Local Authority (2021), Lower Tier Local Authority (2021), Middle Super Output Area (2011), and Lower Super Output Area (2011).

If you require the data at full resolution boundaries, or if you are interested in the range of statistical data that Esri UK make available in ArcGIS Online please enquire at dataenquiries@esriuk.com.

The Office for National Statistics (ONS) produces annual estimates of the resident population of England and Wales at 30 June every year. The most authoritative population estimates come from the census, which takes place every 10 years in the UK. Population estimates from a census are updated each year to produce mid-year population estimates (MYEs), which are broken down by local authority, sex and age. More detailed information on the methods used to generate the mid-year population estimates can be found here.

For further information on the usefulness of the data and guidance on small area geographies please see here.The currency of this data is 2021.

Methodology

The total and 5-year breakdown population counts are reproduced directly from the source data. The age range estimates have been calculated from the published estimates by single year of age. The percentages are calculated using the gender specific (total, female or male) total population count as a denominator except in the case of the male and female total population where the total population is used to give female and male proportions.

This dataset will be updated annually, in two releases.

Creator: Office for National Statistics. Aggregated age groupings and percentages calculated by Esri UK._The data services available from this page are derived from the National Data Service. The NDS delivers thousands of open national statistical indicators for the UK as data-as-a-service. Data are sourced from major providers such as the Office for National Statistics, Public Health England and Police UK and made available for your area at standard geographies such as counties, districts and wards and census output areas. This premium service can be consumed as online web services or on-premise for use throughout the ArcGIS system.Read more about the NDS.

How would you define the boundaries of a town or city in England and Wales in 2016?

Maybe your definition would be based on its population size, geographic extent or where the industry and services are located. This was a question the ONS had to consider when creating a new statistical geography called Towns and Cities.

In reality, the ability to delimit the boundaries of a city or town is difficult!

Major Towns and Cities

The new statistical geography, Towns and Cities has been created based on population size and the extent of the built environment. It contains 112 towns and cities in England and Wales, where the residential and/or workday population > 75,000 people at the 2011 Census. It has been constructed using the existing Built-Up Area boundary set produced by Ordnance Survey in 2011.

This swipe map shows where the towns and cities and built-up areas are different. Just swipe the bar from left to right.

The blue polygons are the towns and cities and the purple polygons are the built-up areas.

Description of Data Population estimates for the 3,780 Data Zones in Northern Ireland were published on 29th May 2025. Time Period Estimates are provided for mid-2021 to mid-2023. Notes: 1. Estimated populations are given as of 30th June for the year noted, rounded to the nearest person. 2. Rounding for estimates at this geographic level is independent. As such, figures may not add to higher geography totals. Methodology The population estimates for small geographical areas are created from an average of two statistical methods: the ratio change and cohort-component methods. The ratio change method applies the change in secondary (typically administrative) data sources to Census estimates. The 2023 small geographical area estimates use a single statistical dataset which has been created by amalgamating a series of different administrative data sources. This statistical dataset is a de-duplicated admin based estimate for the usually resident population of NI. The cohort-component method updates the Census estimates by ‘ageing on’ populations and applying information on births, deaths and migration. An average of both methods is taken and constrained to the published population figures. Further information is available at: NISRA 2023 Mid-year Population Estimates webpage Geographic Referencing Population Estimates are based on a large number of secondary datasets. Where the full address was available, the Pointer Address database was used to allocate a unique property reference number (UPRN) and geo-spatial co-ordinates to each home address. These can then be used to map the address to particular geographies. Where it was not possible to assign a unique property reference number to an address using the Pointer database, or where the secondary dataset contained only postcode information, the Central Postcode Directory was used to map home address postcodes to higher geographies. A small proportion of records with unknown geography were apportioned based on the spatial characteristics of known records. Further Information The next estimates of the population for Northern Ireland will be released later in 2025. Contact: NISRA Customer Services 02890 255156 census@nisra.gov.uk Responsible Statistician: Shauna Dunlop

The census is undertaken by the Office for National Statistics every 10 years and gives us a picture of all the people and households in England and Wales. The most recent census took place in March of 2021.The census asks every household questions about the people who live there and the type of home they live in. In doing so, it helps to build a detailed snapshot of society. Information from the census helps the government and local authorities to plan and fund local services, such as education, doctors' surgeries and roads.Key census statistics for Leicester are published on the open data platform to make information accessible to local services, voluntary and community groups, and residents. There is also a dashboard published showcasing various datasets from the census allowing users to view data for Leicester and compare this with national statistics.Further information about the census and full datasets can be found on the ONS website - https://www.ons.gov.uk/census/aboutcensus/censusproductsPopulation DensityDefinition: This dataset provides Census 2021 estimates that classify usual residents in England and Wales by population density (number of usual residents per square kilometre). The estimates are as at Census Day, 21 March 2021.

Dataset Name: Demographic data from 2021 CensusData Owner: NISRAContact: census@nisra.co.ukSource URL: https://build.nisra.gov.uk/Uploaded to SPACE Hub: 03/07/23Update Frequency: Per censusScale Threshold: some data has 10k threshold appliedProjection : Irish GridFormat: Esri Feature Layer (Hosted) Vector PolygonAbstractThe census collected information on the usually resident population of Northern Ireland on Census Day (21 March 2021).Initial contact letters or questionnaire packs were delivered to every household and communal establishment, and residents were asked to complete online or return the questionnaire with information as correct on Census Day.Special arrangements were made to enumerate special groups such as students, members of the Travellers Community, HM Forces personnel etc.The Census Coverage Survey (an independent doorstep survey) followed between 12 May and 29 June 2021 and was used to adjust the census counts for under-enumeration.Disclosure control methodsStatistical disclosure control (SDC) refers to a range of methods that aim to protect individuals, households, businesses, and their attributes from being identified in published information.NISRA has taken steps to ensure that the confidentiality of respondents is fully protected.All published results from the census have been subject to statistical processes to ensure that individuals cannot be identified. These processes may result in very marginal differences between tables for the same statistic.For Census 2021, NISRA is applying two strategies - targeted record swapping (TRS) and cell key perturbation (CKP), to ensure individuals are protected from identification while minimising the impact on the quality of results.Disclosure control methodologyFor more information, please refer to:Statistical disclosure control methodologyMethodologyThe census questionnaire including the questions asked and the administrative procedures involved in collecting the census data underwent substantial testing. Coding of the data was subject to quality checks.The quality of the results was improved by the use of edit and imputation procedures for missing or incorrect data, and the data were adjusted for over and under-enumeration.The outputs reflect the complete usually-resident population of Northern Ireland.Methodology overviewFurther information on the methodology used in Census 2021 is available in the:Census 2021 methodology overviewQuality issuesThe census results underwent an extensive quality assurance process, which included checks against administrative data sources and information on particular groups such as students and HM Forces personnel.Edit procedures were applied to obviously incorrect responses (such as someone aged 180) and were designed to correct the mistake by making the least possible change to the data.Imputation procedures were applied to missing data on a returned questionnaire, and drew on responses to the question from people with similar characteristics.Quality assurance reportFurther information on the quality assurance processes used in Census 2021 is available in the:Census 2021 quality assurance reportStatement about data qualityFor more information on data quality, including response rate and item response rate, please refer to the:Census 2021 statement about data qualityGeographic referencingIrish National GridNational Statistics publicationCensus statistics are produced by the Northern Ireland Statistics and Research Agency free from political influence and have been assessed as National Statistics by the Office for Statistics Regulation.Office for Statistics RegulationMore information is available on the following web site:Office for Statistics RegulationProducing census statisticsCensus 2021 statistics meet the highest standards of trust, quality and value and are produced using standards set out in the statutory Code of Practice for Statistics.Code of Practice for StatisticsMore information is available in the:Code of Practice for StatisticsDate of publicationJune 2023Further informationCensus 2021 results webpage

Mid-year (30 June) estimates of the usual resident population for Lower layer Super Output Areas (LSOAs) in England and Wales by single year of age and sex.

This data is experimental, see the ‘Access Constraints or User Limitations’ section for more details. This dataset has been generalised to 10 metre resolution where it is still but the space needed for downloads will be improved.A set of UK wide estimated travel area geometries (isochrones), from Output Area (across England, Scotland, and Wales) and Small Area (across Northern Ireland) population-weighted centroids. The modes used in the isochrone calculations are limited to public transport and walking. Generated using Open Trip Planner routing software in combination with Open Street Maps and open public transport schedule data (UK and Ireland).The geometries provide an estimate of reachable areas by public transport and on foot between 7:15am and 9:15am for a range of maximum travel durations (15, 30, 45 and 60 minutes). For England, Scotland and Wales, these estimates were generated using public transport schedule data for Tuesday 15th November 2022. For Northern Ireland, the date used is Tuesday 6th December 2022.The data is made available as a set of ESRI shape files, in .zip format. This corresponds to a total of 18 files; one for Northern Ireland, one for Wales, twelve for England (one per English region, where London, South East and North West have been split into two files each) and four for Scotland (one per NUTS2 region, where the ‘North-East’ and ‘Highlands and Islands’ have been combined into one shape file, and South West Scotland has been split into two files).The shape files contain the following attributes. For further details, see the ‘Access Constraints or User Limitations’ section:AttributeDescriptionOA21CD or SA2011 or OA11CDEngland and Wales: The 2021 Output Area code.Northern Ireland: The 2011 Small Area code.Scotland: The 2011 Output Area code.centre_latThe population-weighted centroid latitude.centre_lonThe population-weighted centroid longitude.node_latThe latitude of the nearest Open Street Map “highway” node to the population-weighted centroid.node_lonThe longitude of the nearest Open Street Map “highway” node to the population-weighted centroid.node_distThe distance, in meters, between the population-weighted centroid and the nearest Open Street Map “highway” node.stop_latThe latitude of the nearest public transport stop to the population-weighted centroid.stop_lonThe longitude of the nearest public transport stop to the population-weighted centroid.stop_distThe distance, in metres, between the population-weighted centroid and the nearest public transport stop.centre_inBinary value (0 or 1), where 1 signifies the population-weighted centroid lies within the Output Area/Small Area boundary. 0 indicates the population-weighted centroid lies outside the boundary.node_inBinary value (0 or 1), where 1 signifies the nearest Open Street Map “highway” node lies within the Output Area/Small Area boundary. 0 indicates the nearest Open Street Map node lies outside the boundary.stop_inBinary value (0 or 1), where 1 signifies the nearest public transport stop lies within the Output Area/Small Area boundary. 0 indicates the nearest transport stop lies outside the boundary.iso_cutoffThe maximum travel time, in seconds, to construct the reachable area/isochrone. Values are either 900, 1800, 2700, or 3600 which correspond to 15, 30, 45, and 60 minute limits respectively.iso_dateThe date for which the isochrones were estimated, in YYYY-MM-DD format.iso_typeThe start point from which the estimated isochrone was calculated. Valid values are:from_centroid: calculated using population weighted centroid.from_node: calculated using the nearest Open Street Map “highway” node.from_stop: calculated using the nearest public transport stop.no_trip_found: no isochrone was calculated.geometryThe isochrone geometry.iso_hectarThe area of the isochrone, in hectares.Access constraints or user limitations.These data are experimental and will potentially have a wider degree of uncertainty. They remain subject to testing of quality, volatility, and ability to meet user needs. The methodologies used to generate them are still subject to modification and further evaluation.These experimental data have been published with specific caveats outlined in this section. The data are shared with the analytical community with the purpose of benefitting from the community's scrutiny and in improving the quality and demand of potential future releases. There may be potential modification following user feedback on both its quality and suitability.For England and Wales, where possible, the latest census 2021 Output Area population weighted centroids were used as the starting point from which isochrones were calculated.For Northern Ireland, 2011 Small Area population weighted centroids were used as the starting point from which isochrones were calculated. Small Areas and Output Areas contain a similar number of households within their boundaries. 2011 data was used because this was the most up-to-date data available at the time of generating this dataset. Population weighted centroids for Northern Ireland were calculated internally but may be subject to change - in the future we aim to update these data to be consistent with Census 2021 across the UK.For Scotland, 2011 Output Area population-weighted centroids were used as the starting point from which isochrones were calculated. 2011 data was used because this was the most up-to-date data available at the time of work.The data for England, Scotland and Wales are released with the projection EPSG:27700 (British National Grid).The data for Northern Ireland are released with the projection EPSG:29902 (Irish Grid).The modes used in the isochrone calculations are limited to public transport and walking. Other modes were not considered when generating this data.A maximum value of 1.5 kilometres walking distance was used when generating isochrones. This approximately represents typical walking distances during a commute (based on Department for Transport/Labour Force Survey data and Travel Survey for Northern Ireland technical reports).When generating Northern Ireland data, public transport schedule data for both Northern Ireland and Republic of Ireland were used.Isochrone geometries and calculated areas are subject to public transport schedule data accuracy, Open Trip Planner routing methods and Open Street Map accuracy. The location of the population-weighted centroid can also influence the validity of the isochrones, when this falls on land which is not possible or is difficult to traverse (e.g., private land and very remote locations).The Northern Ireland public transport data were collated from several files, and as such required additional pre-processing. Location data are missing for two bus stops. Some services run by local public transport providers may also be missing. However, the missing data should have limited impact on the isochrone output. Due to the availability of Northern Ireland public transport data, the isochrones for Northern Ireland were calculated on a comparable but slight later date of 6th December 2022. Any potential future releases are likely to contained aligned dates between all four regions of the UK.In cases where isochrones are not calculable from the population-weighted centroid, or when the calculated isochrones are unrealistically small, the nearest Open Street Map ‘highway’ node is used as an alternative starting point. If this then fails to yield a result, the nearest public transport stop is used as the isochrone origin. If this also fails to yield a result, the geometry will be ‘None’ and the ‘iso_hectar’ will be set to zero. The following information shows a further breakdown of the isochrone types for the UK as a whole:from_centroid: 99.8844%from_node: 0.0332%from_stop: 0.0734%no_trip_found: 0.0090%The term ‘unrealistically small’ in the point above refers to outlier isochrones with a significantly smaller area when compared with both their neighbouring Output/Small Areas and the entire regional distribution. These reflect a very small fraction of circumstances whereby the isochrone extent was impacted by the centroid location and/or how Open Trip Planner handled them (e.g. remote location, private roads and/or no means of traversing the land). Analysis showed these outliers were consistently below 100 hectares for 60-minute isochrones. Therefore, In these cases, the isochrone point of origin was adjusted to the nearest node or stop, as outlined above.During the quality assurance checks, the extent of the isochrones was observed to be in good agreement with other routing software and within the limitations stated within this section. Additionally, the use of nearest node, nearest stop, and correction of ‘unrealistically small areas’ was implemented in a small fraction of cases only. This culminates in no data being available for 8 out of 239,768 Output/Small Areas.Data is only available in ESRI shape file format (.zip) at this release.https://www.openstreetmap.org/copyright

The ethnic group that the person completing the census feels they belong to. This could be based on their culture, family background, identity or physical appearance.CoverageThis dataset is focused on the data for Birmingham at Ward level. Also available at LSOA, MSOA and Constituency levels.About the 2021 CensusThe Census takes place every 10 years and gives us a picture of all the people and households in England and Wales.Protecting personal dataThe ONS sometimes need to make changes to data if it is possible to identify individuals. This is known as statistical disclosure control. In Census 2021, they:

Swapped records (targeted record swapping), for example, if a household was likely to be identified in datasets because it has unusual characteristics, they swapped the record with a similar one from a nearby small area. Very unusual households could be swapped with one in a nearby local authority. Added small changes to some counts (cell key perturbation), for example, we might change a count of four to a three or a five. This might make small differences between tables depending on how the data are broken down when they applied perturbation.For more geographies, aggregations or topics see the link in the Reference below. Or, to create a custom dataset with multiple variables use the ONS Create a custom dataset tool.Population valueThe value column represents All usual residents.The percentage shown is the value as a percentage of All usual residents within the given geography.

Mapping the location and characteristics of high streets in Great Britain, working with experimental Ordnance Survey High Street extents and Office for National Statistics data.

The census is undertaken by the Office for National Statistics every 10 years and gives us a picture of all the people and households in England and Wales. The most recent census took place in March of 2021.The census asks every household questions about the people who live there and the type of home they live in. In doing so, it helps to build a detailed snapshot of society. Information from the census helps the government and local authorities to plan and fund local services, such as education, doctors' surgeries and roads.Key census statistics for Leicester are published on the open data platform to make information accessible to local services, voluntary and community groups, and residents. There is also a dashboard available that shows data relating to the wards of Leicester. Further information about the census and full datasets can be found on the ONS website - https://www.ons.gov.uk/census/aboutcensus/censusproductsEthnicityThis dataset provides Census 2021 estimates that classify usual residents in England and Wales by ethnic group. The estimates are as at Census Day, 21 March 2021.Definition: The ethnic group that the person completing the census feels they belong to. This could be based on their culture, family background, identity or physical appearance.Respondents could choose one out of 19 tick-box response categories, including write-in response options.This dataset includes data relating to the electoral wards of Leicester City.

The population of the world, allocated to 1 arcsecond blocks. This refines CIESIN’s Gridded Population of the World project, using machine learning models on high-resolution worldwide Digital Globe satellite imagery.

This report was released in September 2010. However, recent demographic data is available on the datastore - you may find other datasets on the Datastore useful such as: GLA Population Projections, National Insurance Number Registrations of Overseas Nationals, Births by Birthplace of Mother, Births and Fertility Rates, Office for National Statistics (ONS) Population Estimates

FOCUSON**LONDON**2010:**POPULATION**AND**MIGRATION**

London is the United Kingdom’s only city region. Its population of 7.75 million is 12.5 per cent of the UK population living on just 0.6 per cent of the land area. London’s average population density is over 4,900 persons per square kilometre, this is ten times that of the second most densely populated region.

Between 2001 and 2009 London’s population grew by over 430 thousand, more than any other region, accounting for over 16 per cent of the UK increase.

This report discusses in detail the population of London including Population Age Structure, Fertility and Mortality, Internal Migration, International Migration, Population Turnover and Churn, and Demographic Projections.

Population and Migration report is the first release of the Focus on London 2010-12 series. Reports on themes such as Income, Poverty, Labour Market, Skills, Health, and Housing are also available.

REPORT:

Read the full report in PDF format.

https://londondatastore-upload.s3.amazonaws.com/fol/FocusOnLondonCoverweb.jpg" alt="">

PRESENTATION:

To access an interactive presentation about population changes in London click the link to see it on Prezi.com

DATA:

To access a spreadsheet with all the data from the Population and Migration report click on the image below.

Report data

MAP:

To enter an interactive map showing a number of indicators discussed in the Population and Migration report click on the image below.

Interactive Maps

FACTS:

● Top five boroughs for babies born per 10,000 population in 2008-09:

1. Newham – 244.4
2. Barking and Dagenham – 209.3
3. Hackney – 205.7
4. Waltham Forest – 202.7
5. Greenwich – 196.2

-32. Havering – 116.8

-33. City of London – 47.0

● In 2009, Barnet overtook Croydon as the most populous London borough. Prior to this Croydon had been the largest since 1966

● Population per hectare of land used for Domestic building and gardens is highest in Tower Hamlets

● In 2008-09, natural change (births minus deaths) led to 78,000 more Londoners compared with only 8,000 due to migration. read more about this or click play on the chart below to reveal how regional components of populations change have altered over time.

The world's most accurate population datasets. Seven maps/datasets for the distribution of various populations in Mauritius: (1) Overall population density (2) Women (3) Men (4) Children (ages 0-5) (5) Youth (ages 15-24) (6) Elderly (ages 60+) (7) Women of reproductive age (ages 15-49).

The population of the United Kingdom in 2023 was estimated to be approximately 68.3 million in 2023, with almost 9.48 million people living in South East England. London had the next highest population, at over 8.9 million people, followed by the North West England at 7.6 million. With the UK's population generally concentrated in England, most English regions have larger populations than the constituent countries of Scotland, Wales, and Northern Ireland, which had populations of 5.5 million, 3.16 million, and 1.92 million respectively. English counties and cities The United Kingdom is a patchwork of various regional units, within England the largest of these are the regions shown here, which show how London, along with the rest of South East England had around 18 million people living there in this year. The next significant regional units in England are the 47 metropolitan and ceremonial counties. After London, the metropolitan counties of the West Midlands, Greater Manchester, and West Yorkshire were the biggest of these counties, due to covering the large urban areas of Birmingham, Manchester, and Leeds respectively. Regional divisions in Scotland, Wales and Northern Ireland The smaller countries that comprise the United Kingdom each have different local subdivisions. Within Scotland these are called council areas whereas in Wales the main regional units are called unitary authorities. Scotland's largest Council Area by population is that of Glasgow City at over 622,000, while in Wales, it was the Cardiff Unitary Authority at around 372,000. Northern Ireland, on the other hand, has eleven local government districts, the largest of which is Belfast with a population of around 348,000.

This repository includes spatial population projections until 2100 for the different Shared Socioeconomic Pathways at 30 arc seconds (~1km) resolution for all EU countries. The projections are provided in WGS84 coordinate system.Detailed information about the projections and the model to produce them can be found in the related publication (Bonatz et al. 2025, in preparation). The python code to run the model is also provided in this repository.

Overview

Empower your location data visualizations with our edge-matched polygons, even in difficult geographies.

Our self-hosted geospatial data cover administrative and postal divisions with up to 5 precision levels. All levels follow a seamless hierarchical structure with no gaps or overlaps.

The geospatial data shapes are offered in high-precision and visualization resolution and are easily customized on-premise.

Use cases for the Global Administrative Boundaries Database (Geospatial data, Map data)

• In-depth spatial analysis

• Clustering

• Geofencing

• Reverse Geocoding

• Reporting and Business Intelligence (BI)

Product Features

• Coherence and precision at every level

• Edge-matched polygons

• High-precision shapes for spatial analysis

• Fast-loading polygons for reporting and BI

• Multi-language support

For additional insights, you can combine the map data with:

• Population data: Historical and future trends

• UNLOCODE and IATA codes

• Time zones and Daylight Saving Time (DST)

Data export methodology

Our location data packages are offered in variable formats, including - .shp - .gpkg - .kml - .shp - .gpkg - .kml - .geojson

All geospatial data are optimized for seamless integration with popular systems like Esri ArcGIS, Snowflake, QGIS, and more.

Why companies choose our map data

• Precision at every level

• Coverage of difficult geographies

• No gaps, nor overlaps

Note: Custom geospatial data packages are available. Please submit a request via the above contact button for more details.

This data is experimental, see the ‘Access Constraints or User Limitations’ section for more details. This dataset has been generalised to 10 metre resolution where it is still but the space needed for downloads will be improved.A set of UK wide estimated travel area geometries (isochrones), from Output Area (across England, Scotland, and Wales) and Small Area (across Northern Ireland) population-weighted centroids. The modes used in the isochrone calculations are limited to public transport and walking. Generated using Open Trip Planner routing software in combination with Open Street Maps and open public transport schedule data (UK and Ireland).The geometries provide an estimate of reachable areas by public transport and on foot between 7:15am and 9:15am for a range of maximum travel durations (15, 30, 45 and 60 minutes). For England, Scotland and Wales, these estimates were generated using public transport schedule data for Tuesday 15th November 2022. For Northern Ireland, the date used is Tuesday 6th December 2022.The data is made available as a set of ESRI shape files, in .zip format. This corresponds to a total of 18 files; one for Northern Ireland, one for Wales, twelve for England (one per English region, where London, South East and North West have been split into two files each) and four for Scotland (one per NUTS2 region, where the ‘North-East’ and ‘Highlands and Islands’ have been combined into one shape file, and South West Scotland has been split into two files).The shape files contain the following attributes. For further details, see the ‘Access Constraints or User Limitations’ section:AttributeDescriptionOA21CD or SA2011 or OA11CDEngland and Wales: The 2021 Output Area code.Northern Ireland: The 2011 Small Area code.Scotland: The 2011 Output Area code.centre_latThe population-weighted centroid latitude.centre_lonThe population-weighted centroid longitude.node_latThe latitude of the nearest Open Street Map “highway” node to the population-weighted centroid.node_lonThe longitude of the nearest Open Street Map “highway” node to the population-weighted centroid.node_distThe distance, in meters, between the population-weighted centroid and the nearest Open Street Map “highway” node.stop_latThe latitude of the nearest public transport stop to the population-weighted centroid.stop_lonThe longitude of the nearest public transport stop to the population-weighted centroid.stop_distThe distance, in metres, between the population-weighted centroid and the nearest public transport stop.centre_inBinary value (0 or 1), where 1 signifies the population-weighted centroid lies within the Output Area/Small Area boundary. 0 indicates the population-weighted centroid lies outside the boundary.node_inBinary value (0 or 1), where 1 signifies the nearest Open Street Map “highway” node lies within the Output Area/Small Area boundary. 0 indicates the nearest Open Street Map node lies outside the boundary.stop_inBinary value (0 or 1), where 1 signifies the nearest public transport stop lies within the Output Area/Small Area boundary. 0 indicates the nearest transport stop lies outside the boundary.iso_cutoffThe maximum travel time, in seconds, to construct the reachable area/isochrone. Values are either 900, 1800, 2700, or 3600 which correspond to 15, 30, 45, and 60 minute limits respectively.iso_dateThe date for which the isochrones were estimated, in YYYY-MM-DD format.iso_typeThe start point from which the estimated isochrone was calculated. Valid values are:from_centroid: calculated using population weighted centroid.from_node: calculated using the nearest Open Street Map “highway” node.from_stop: calculated using the nearest public transport stop.no_trip_found: no isochrone was calculated.geometryThe isochrone geometry.iso_hectarThe area of the isochrone, in hectares.Access constraints or user limitations.These data are experimental and will potentially have a wider degree of uncertainty. They remain subject to testing of quality, volatility, and ability to meet user needs. The methodologies used to generate them are still subject to modification and further evaluation.These experimental data have been published with specific caveats outlined in this section. The data are shared with the analytical community with the purpose of benefitting from the community's scrutiny and in improving the quality and demand of potential future releases. There may be potential modification following user feedback on both its quality and suitability.For England and Wales, where possible, the latest census 2021 Output Area population weighted centroids were used as the starting point from which isochrones were calculated.For Northern Ireland, 2011 Small Area population weighted centroids were used as the starting point from which isochrones were calculated. Small Areas and Output Areas contain a similar number of households within their boundaries. 2011 data was used because this was the most up-to-date data available at the time of generating this dataset. Population weighted centroids for Northern Ireland were calculated internally but may be subject to change - in the future we aim to update these data to be consistent with Census 2021 across the UK.For Scotland, 2011 Output Area population-weighted centroids were used as the starting point from which isochrones were calculated. 2011 data was used because this was the most up-to-date data available at the time of work.The data for England, Scotland and Wales are released with the projection EPSG:27700 (British National Grid).The data for Northern Ireland are released with the projection EPSG:29902 (Irish Grid).The modes used in the isochrone calculations are limited to public transport and walking. Other modes were not considered when generating this data.A maximum value of 1.5 kilometres walking distance was used when generating isochrones. This approximately represents typical walking distances during a commute (based on Department for Transport/Labour Force Survey data and Travel Survey for Northern Ireland technical reports).When generating Northern Ireland data, public transport schedule data for both Northern Ireland and Republic of Ireland were used.Isochrone geometries and calculated areas are subject to public transport schedule data accuracy, Open Trip Planner routing methods and Open Street Map accuracy. The location of the population-weighted centroid can also influence the validity of the isochrones, when this falls on land which is not possible or is difficult to traverse (e.g., private land and very remote locations).The Northern Ireland public transport data were collated from several files, and as such required additional pre-processing. Location data are missing for two bus stops. Some services run by local public transport providers may also be missing. However, the missing data should have limited impact on the isochrone output. Due to the availability of Northern Ireland public transport data, the isochrones for Northern Ireland were calculated on a comparable but slight later date of 6th December 2022. Any potential future releases are likely to contained aligned dates between all four regions of the UK.In cases where isochrones are not calculable from the population-weighted centroid, or when the calculated isochrones are unrealistically small, the nearest Open Street Map ‘highway’ node is used as an alternative starting point. If this then fails to yield a result, the nearest public transport stop is used as the isochrone origin. If this also fails to yield a result, the geometry will be ‘None’ and the ‘iso_hectar’ will be set to zero. The following information shows a further breakdown of the isochrone types for the UK as a whole:from_centroid: 99.8844%from_node: 0.0332%from_stop: 0.0734%no_trip_found: 0.0090%The term ‘unrealistically small’ in the point above refers to outlier isochrones with a significantly smaller area when compared with both their neighbouring Output/Small Areas and the entire regional distribution. These reflect a very small fraction of circumstances whereby the isochrone extent was impacted by the centroid location and/or how Open Trip Planner handled them (e.g. remote location, private roads and/or no means of traversing the land). Analysis showed these outliers were consistently below 100 hectares for 60-minute isochrones. Therefore, In these cases, the isochrone point of origin was adjusted to the nearest node or stop, as outlined above.During the quality assurance checks, the extent of the isochrones was observed to be in good agreement with other routing software and within the limitations stated within this section. Additionally, the use of nearest node, nearest stop, and correction of ‘unrealistically small areas’ was implemented in a small fraction of cases only. This culminates in no data being available for 8 out of 239,768 Output/Small Areas.Data is only available in ESRI shape file format (.zip) at this release.https://www.openstreetmap.org/copyright