Mogadishu in Somalia led the ranking of cities with the highest population density in 2023, with ****** residents per square kilometer. When it comes to countries, Monaco is the most densely populated state worldwide.

In 2023, Washington, D.C. had the highest population density in the United States, with 11,130.69 people per square mile. As a whole, there were about 94.83 residents per square mile in the U.S., and Alaska was the state with the lowest population density, with 1.29 residents per square mile. The problem of population density Simply put, population density is the population of a country divided by the area of the country. While this can be an interesting measure of how many people live in a country and how large the country is, it does not account for the degree of urbanization, or the share of people who live in urban centers. For example, Russia is the largest country in the world and has a comparatively low population, so its population density is very low. However, much of the country is uninhabited, so cities in Russia are much more densely populated than the rest of the country. Urbanization in the United States While the United States is not very densely populated compared to other countries, its population density has increased significantly over the past few decades. The degree of urbanization has also increased, and well over half of the population lives in urban centers.

This map shows population density of the United States. Areas in darker magenta have much higher population per square mile than areas in orange or yellow. Data is from the U.S. Census Bureau’s 2020 Census Demographic and Housing Characteristics. The map's layers contain total population counts by sex, age, and race groups for Nation, State, County, Census Tract, and Block Group in the United States and Puerto Rico. From the Census:"Population density allows for broad comparison of settlement intensity across geographic areas. In the U.S., population density is typically expressed as the number of people per square mile of land area. The U.S. value is calculated by dividing the total U.S. population (316 million in 2013) by the total U.S. land area (3.5 million square miles).When comparing population density values for different geographic areas, then, it is helpful to keep in mind that the values are most useful for small areas, such as neighborhoods. For larger areas (especially at the state or country scale), overall population density values are less likely to provide a meaningful measure of the density levels at which people actually live, but can be useful for comparing settlement intensity across geographies of similar scale." SourceAbout the dataYou can use this map as is and you can also modify it to use other attributes included in its layers. This map's layers contain total population counts by sex, age, and race groups data from the 2020 Census Demographic and Housing Characteristics. This is shown by Nation, State, County, Census Tract, Block Group boundaries. Each geography layer contains a common set of Census counts based on available attributes from the U.S. Census Bureau. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.Vintage of boundaries and attributes: 2020 Demographic and Housing Characteristics Table(s): P1, H1, H3, P2, P3, P5, P12, P13, P17, PCT12 (Not all lines of these DHC tables are available in this feature layer.)Data downloaded from: U.S. Census Bureau’s data.census.gov siteDate the Data was Downloaded: May 25, 2023Geography Levels included: Nation, State, County, Census Tract, Block GroupNational Figures: included in Nation layer The United States Census Bureau Demographic and Housing Characteristics: 2020 Census Results 2020 Census Data Quality Geography & 2020 Census Technical Documentation Data Table Guide: includes the final list of tables, lowest level of geography by table and table shells for the Demographic Profile and Demographic and Housing Characteristics.News & Updates This map is ready to be used in ArcGIS Pro, ArcGIS Online and its configurable apps, Story Maps, dashboards, Notebooks, Python, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the U.S. Census Bureau when using this data. Data Processing Notes: These 2020 Census boundaries come from the US Census TIGER geodatabases. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For Census tracts and block groups, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract and block group boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are unchanged and available as attributes within the data table (units are square meters).  The layer contains all US states, Washington D.C., and Puerto Rico. Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Block groups that fall within the same criteria (Block Group denoted as 0 with no area land) have also been removed.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.

Monaco led the ranking for countries with the highest population density in 2024, with nearly 26,000 residents per square kilometer. The Special Administrative Region of Macao came in second, followed by Singapore. The world’s second smallest country Monaco is the world’s second-smallest country, with an area of about two square kilometers and a population of only around 40,000. It is a constitutional monarchy located by the Mediterranean Sea, and while Monaco is not part of the European Union, it does participate in some EU policies. The country is perhaps most famous for the Monte Carlo casino and for hosting the Monaco Grand Prix, the world's most prestigious Formula One race. The global population Globally, the population density per square kilometer is about 60 inhabitants, and Asia is the most densely populated region in the world. The global population is increasing rapidly, so population density is only expected to increase. In 1950, for example, the global population stood at about 2.54 billion people, and it reached over eight billion during 2023.

United States US: Population Density: People per Square Km data was reported at 35.608 Person/sq km in 2017. This records an increase from the previous number of 35.355 Person/sq km for 2016. United States US: Population Density: People per Square Km data is updated yearly, averaging 26.948 Person/sq km from Dec 1961 (Median) to 2017, with 57 observations. The data reached an all-time high of 35.608 Person/sq km in 2017 and a record low of 20.056 Person/sq km in 1961. United States US: Population Density: People per Square Km data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s United States – Table US.World Bank.WDI: Population and Urbanization Statistics. Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.; ; Food and Agriculture Organization and World Bank population estimates.; Weighted average;

Each year, the Forecasting and Trends Office (FTO) publishes population estimates and future year projections. The population estimates can be used for a variety of planning studies including statewide and regional transportation plan updates, subarea and corridor studies, and funding allocations for various planning agencies. The 2021 population estimates are based on the population estimates developed by the Bureau of Economic and Business Research (BEBR) at the University of Florida. BEBR uses the decennial census count for April 1, 2020, as the starting point for state-level projections. More information is available from BEBR here. This dataset contains boundaries for all 2010 Census Urbanized Areas (UAs) in the State of Florida with 2021 population density estimates. All legal boundaries and names in this dataset are from the US Census Bureau’s TIGER/Line Files (2021). BEBR provides 2021 population estimates for counties in Florida. However, UA boundaries may not coincide with the jurisdictional boundaries of counties and UAs often spread into several counties. To estimate the population for an UA, first the ratio of the subject UA that is contained within a county (or sub-area) to the area of the entire county was determined. That ratio was multiplied by the estimated county population to obtain the population for that sub-area. The population for the entire UA is the sum of all sub-area populations estimated from the counties they are located within. For the 2010 Census, urban areas comprised a “densely settled core of census tracts and/or census blocks that meet minimum population density requirements, along with adjacent territory containing non-residential urban land uses as well as territory with low population density included to link outlying densely settled territory with the densely settled core.” In 2010, the US Census Bureau identified two types of urban areas—UAs and Urban Clusters (UCs). UAs have a population of 50,000 or more people. Note: Pensacola, FL--AL Urbanized Area is located in two states: Florida (Escambia County and Santa Rosa County) and Alabama (Baldwin County). 2021 population of Baldwin County, AL used for this estimation is from the US Census annual population estimates (2020-2021). All other Urbanized Areas are located entirely within the state of Florida. Please see the Data Dictionary for more information on data fields. Data Sources:FDOT FTO 2020 and 2021 Population Estimates by Urbanized Area and CountyUS Census Bureau 2020 Decennial CensusUS Census Bureau’s TIGER/Line Files (2021)Bureau of Economic and Business Research (BEBR) – Florida Estimates of Population 2021 Data Coverage: StatewideData Time Period: 2021 Date of Publication: October 2022 Point of Contact:Dana Reiding, ManagerForecasting and Trends OfficeFlorida Department of TransportationDana.Reiding@dot.state.fl.us605 Suwannee Street, Tallahassee, Florida 32399850-414-4719

This map shows four of these densely populated areas are in California. The San Francisco-Oakland and San Jose Urban Areas rank second and third, respectively. That the New York Metropolitan area ranks fifth on this list shows that this density ranking is greatly affected by the nature of the land area designated as urban. Census Urban Areas comprise an urban core and associated suburbs. California's urban and suburban areas are more uniform in density when compared to New York's urban core and suburban periphery which have vastly different densities. Delano ranks fourth because it has a very small land area and its population is augmented by two large California State Prisons housing 10,000 inmates.

Population - densely populated built-up areas (Residential built-up areas). Information from Strategic maps for environmental noise in agglomerations Sofia, Plovdiv, Varna, Burgas, Ruse, Pleven, Stara Zagora

Mid-year (30 June) population density of Lower layer Super Output Areas (LSOAs) in England and Wales based on estimates of the usual resident population.

Population density by NUTS 3 region

As of July 2022, Monaco is the country with the highest population density worldwide with an estimated population of nearly 24,500 per square kilometer. However, by 2050, it is expected to be overtaken by the Special Administrative Region of Macao.

Netherlands NL: Population Density: People per Square Km data was reported at 508.544 Person/sq km in 2017. This records an increase from the previous number of 505.501 Person/sq km for 2016. Netherlands NL: Population Density: People per Square Km data is updated yearly, averaging 439.837 Person/sq km from Dec 1961 (Median) to 2017, with 57 observations. The data reached an all-time high of 508.544 Person/sq km in 2017 and a record low of 344.749 Person/sq km in 1961. Netherlands NL: Population Density: People per Square Km data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Netherlands – Table NL.World Bank.WDI: Population and Urbanization Statistics. Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.; ; Food and Agriculture Organization and World Bank population estimates.; Weighted average;

A population is a subgroup of individuals within the same species that are living and breeding within a geographic area. The number of individuals living within that specific location determines the population density, or the number of individuals divided by the size of the area.Population density can be used to describe the location, growth, and migration of many organisms. In the case of humans, population density is often discussed in relation to urbanization, immigration, and population demographics.Globally, statistics related to population density are tracked by the United Nations Statistics Division, and the United States Constitution requires population data to be collected every 10 years, an operation carried out by the U.S. Census Bureau. However, data on human population density at the country level, and even at regional levels, may not be very informative; society tends to form clusters that can be surrounded by sparsely inhabited areas. Therefore, the most useful data describes smaller, more discrete population centers.Dense population clusters generally coincide with geographical locations often referred to as city, or as an urban or metropolitan area; sparsely populated areas are often referred to as rural. These terms do not have globally agreed upon definitions, but they are useful in general discussions about population density and geographic location.Population density data can be important for many related studies, including studies of ecosystems and improvements to human health and infrastructure. For example, the World Health Organization, the U.S. Energy Information Administration, the U.S. Global Change Research Program, and the U.S. Departments of Energy and Agriculture all use population data from the U.S. Census or UN statistics to understand and better predict resource use and health trends.Key areas of study include the following:Ecology: how increasing population density in certain areas impacts biodiversity and use of natural resources.Epidemiology: how densely populated areas differ with respect to incidence, prevalence, and transmission of infectious disease.Infrastructure: how population density drives specific requirements for energy use and the transport of goods.This list is not inclusive—the way society structures its living spaces affects many other fields of study as well. Scientists have even studied how happiness correlates with population density. A substantial area of study, however, focuses on demographics of populations as they relate to density. Areas of demographic breakdown and study include, but are not limited to:age (including tracking of elderly population centers);sex (biological classification as male or female); andrace and ethnic group, or cultural characteristics (ethnic origin and language use).

The data included in this publication depict components of wildfire risk specifically for populated areas in the United States. These datasets represent where people live in the United States and the in situ risk from wildfire, i.e., the risk at the location where the adverse effects take place.National wildfire hazard datasets of annual burn probability and fire intensity, generated by the USDA Forest Service, Rocky Mountain Research Station and Pyrologix LLC, form the foundation of the Wildfire Risk to Communities data. Vegetation and wildland fuels data from LANDFIRE 2020 (version 2.2.0) were used as input to two different but related geospatial fire simulation systems. Annual burn probability was produced with the USFS geospatial fire simulator (FSim) at a relatively coarse cell size of 270 meters (m). To bring the burn probability raster data down to a finer resolution more useful for assessing hazard and risk to communities, we upsampled them to the native 30 m resolution of the LANDFIRE fuel and vegetation data. In this upsampling process, we also spread values of modeled burn probability into developed areas represented in LANDFIRE fuels data as non-burnable. Burn probability rasters represent landscape conditions as of the end of 2020. Fire intensity characteristics were modeled at 30 m resolution using a process that performs a comprehensive set of FlamMap runs spanning the full range of weather-related characteristics that occur during a fire season and then integrates those runs into a variety of results based on the likelihood of those weather types occurring. Before the fire intensity modeling, the LANDFIRE 2020 data were updated to reflect fuels disturbances occurring in 2021 and 2022. As such, the fire intensity datasets represent landscape conditions as of the end of 2022. The data products in this publication that represent where people live, reflect 2021 estimates of housing unit and population counts from the U.S. Census Bureau, combined with building footprint data from Onegeo and USA Structures, both reflecting 2022 conditions.The specific raster datasets included in this publication include:Building Count: Building Count is a 30-m raster representing the count of buildings in the building footprint dataset located within each 30-m pixel.Building Density: Building Density is a 30-m raster representing the density of buildings in the building footprint dataset (buildings per square kilometer [km²]).Building Coverage: Building Coverage is a 30-m raster depicting the percentage of habitable land area covered by building footprints.Population Count (PopCount): PopCount is a 30-m raster with pixel values representing residential population count (persons) in each pixel.Population Density (PopDen): PopDen is a 30-m raster of residential population density (people/km²).Housing Unit Count (HUCount): HUCount is a 30-m raster representing the number of housing units in each pixel.Housing Unit Density (HUDen): HUDen is a 30-m raster of housing-unit density (housing units/km²).Housing Unit Exposure (HUExposure): HUExposure is a 30-m raster that represents the expected number of housing units within a pixel potentially exposed to wildfire in a year. This is a long-term annual average and not intended to represent the actual number of housing units exposed in any specific year.Housing Unit Impact (HUImpact): HUImpact is a 30-m raster that represents the relative potential impact of fire to housing units at any pixel, if a fire were to occur. It is an index that incorporates the general consequences of fire on a home as a function of fire intensity and uses flame length probabilities from wildfire modeling to capture likely intensity of fire.Housing Unit Risk (HURisk): HURisk is a 30-m raster that integrates all four primary elements of wildfire risk - likelihood, intensity, susceptibility, and exposure - on pixels where housing unit density is greater than zero.Additional methodology documentation is provided with the data publication download. Metadata and Downloads.Note: Pixel values in this image service have been altered from the original raster dataset due to data requirements in web services. The service is intended primarily for data visualization. Relative values and spatial patterns have been largely preserved in the service, but users are encouraged to download the source data for quantitative analysis.

The population density picture of Boston is generally a story of two Bostons: the high density central and northern neighborhoods, and the low density southern neighborhoods.The highest density areas of Boston are particularly concentrated in Brighton, Allston, and the Fenway area, areas of the city with large numbers of college students and young adults. There is also high population density in areas such as the Back Bay, the South End, Charlestown, the North End, and South Boston. These are all relatively small areas geographically, but have housing stock conducive to population density (e.g. multi-family dwelling units, row housing, large apartment buildings). The southern neighborhoods, specifically Hyde Park and West Roxbury, have significant numbers of people living in them, but lots sizes tend to be much larger. These areas of the city also tend to have more single family dwelling units. In that, there are fewer people per square mile than places north in the city. Census data reveals that population density varies noticeably from area to area. Small area census data do a better job depicting where the crowded neighborhoods are. In this map, areas of highest density exceed 30,000 persons per square kilometer. Very high density areas exceed 7,000 persons per square kilometer. High density areas exceed 5,200 persons per square kilometer. The last categories break at 3,330 persons per square kilometer, and 1,500 persons per square kilometer.How to make this map for your city

Percent of coastline densely populated, by marine ecoregion.

The map shows the proportion of coastline (from the shore to within five kilometers of the coast) in each ecoregion where there are more than five hundred persons per square kilometer. By focusing attention on a narrow coastal strip, we believe that we are capturing areas with the highest likelihood of significant losses of intertidal and adjacent habitats as a result of building, dredging, land reclamation, and other forms of coastal engineering. It does not, of course, measure areas of coastal development per se and does not capture areas where aquaculture, agriculture, or low-density tourism have impacts.

These data were derived by The Nature Conservancy, and were displayed in a map published in The Atlas of Global Conservation (Hoekstra et al., University of California Press, 2010). More information at http://nature.org/atlas.

Data derived from:

Center for International Earth Science Information Network (CIESIN), Columbia University; and Centro Internacional de Agricultura Tropical (CIAT). 2005. Gridded Population of the World Version 3 (GPWv3), Socioeconomic Data and Applications Center (SEDAC), Columbia University Palisades, New York. Available at http://sedac.ciesin.columbia.edu/gpw. Digital media.

For more about The Atlas of Global Conservation check out the web map (which includes links to download spatial data and view metadata) at http://maps.tnc.org/globalmaps.html. You can also read more detail about the Atlas at http://www.nature.org/science-in-action/leading-with-science/conservation-atlas.xml, or buy the book at http://www.ucpress.edu/book.php?isbn=9780520262560

United Kingdom UK: Population Density: People per Square Km data was reported at 272.898 Person/sq km in 2017. This records an increase from the previous number of 271.134 Person/sq km for 2016. United Kingdom UK: Population Density: People per Square Km data is updated yearly, averaging 235.922 Person/sq km from Dec 1961 (Median) to 2017, with 57 observations. The data reached an all-time high of 272.898 Person/sq km in 2017 and a record low of 218.245 Person/sq km in 1961. United Kingdom UK: Population Density: People per Square Km data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s United Kingdom – Table UK.World Bank.WDI: Population and Urbanization Statistics. Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.; ; Food and Agriculture Organization and World Bank population estimates.; Weighted average;

Population density (people per sq. km of land area) in Guyana was reported at 4.1739 sq. Km in 2022, according to the World Bank collection of development indicators, compiled from officially recognized sources. Guyana - Population density (people per sq. km) - actual values, historical data, forecasts and projections were sourced from the World Bank on June of 2025.

This dataset provides population density estimates in persons per square kilometre for the local authorities in Wales for the period from 1991 onwards. The figures are derived by dividing the mid-year population estimates by the latest land area estimates in square kilometres, measured at the mean high water mark, and excluding areas of inland water as recommended by the Office for National Statistics. The supporting population and area estimates are included in the dataset. It should be noted that there are some definitional changes for mid-2020 (particularly affecting the migration components) compared with mid-2019 populations estimates data, and it is advised users read the Quality and Methodology Information section on the Office for National Statistics website. For Wales, the mid-2021 population estimates are the first population estimates to be based on Census 2021. Internal migration estimates for mid-2023 have been produced using a different method to previous years, following a change to the variables available in the Higher Education Statistics Agency (HESA) data. This material is Crown Copyright and may be re-used (not including logos) free of charge in any format or medium, under the terms of the Open Government Licence.

As of 2023, the population density in London was by far the highest number of people per square km in the UK, at 5,690. Of the other regions and countries which constitute the United Kingdom, North West England was the next most densely populated area at 533 people per square kilometer. Scotland, by contrast, is the most sparsely populated country or region in the United Kingdom, with only 70 people per square kilometer. UK population over 67 million According to the official mid-year population estimate, the population of the United Kingdom was just almost 67.6 million in 2022. Most of the population lived in England, where an estimated 57.1 million people resided, followed by Scotland at 5.44 million, Wales at 3.13 million and finally Northern Ireland at just over 1.9 million. Within England, the South East was the region with the highest population at almost 9.38 million, followed by the London region at around 8.8 million. In terms of urban areas, Greater London is the largest city in the United Kingdom, followed by Greater Manchester and Birmingham in the North West and West Midlands regions of England. London calling London's huge size in relation to other UK cities is also reflected by its economic performance. In 2021, London's GDP was approximately 494 billion British pounds, almost a quarter of UK GDP overall. In terms of GDP per capita, Londoners had a GDP per head of 56,431 pounds, compared with an average of 33,224 for the country as a whole. Productivity, expressed as by output per hour worked, was also far higher in London than the rest of the country. In 2021, London was around 33.2 percent more productive than the rest of the country, with South East England the only other region where productivity was higher than the national average.