This map contains cemeteries located within Dickinson County. The layers contain cemetery boundaries, additions to cemeteries, blocks, lots, and grave spaces. Information has been provided from the local cemetery and is updated as the cemetery board provides new data.
11/22/2024- County-wide road updates were completed in Golden Valley and Billings Counties. Intersecting routes throughout the state were cartographically realigned in preparation of MIRE intersections 6/27/2024 - The data was prepared for HPMS submittal which included updated 2023 AADT values and to keep certain segments consistent with HPMS segments, mainly sample sections and the NHS, values of "BOTH", "NHS" and "SAMPLE" were added to the field HPMS_ROUTE_ID to distinguish these segments from other segments. 3/19/2024 - Miscellaneous updates were done in Dunn County. County wide updates to Grand Forks and Golden Valley counties along with route realignments at intersections throughout the state.12/04/2023 - County wide updates to Walsh, Dunn and Grand Forks Counties and various updates to county/local roads throughout the state including street names in Westhope8/23/2023 - Function Class changes were updated in McLean and Mountrail Counties. Function Class updates also occurred in the cities of Fargo, Valley City, West Fargo and Williston. County-wide updates completed for: Towner, Cavalier, Pembina, Pierce, Benson, Ramsey. 2022 AADTs updated. A road was also removed in Bottineau County at the request off a landowner.5/19/22 - Dunn County contacted the NDDOT with data updates ,Rolette County was updated, and the 2021 AADT's were updated. 2/14/22 - Contacted by the Dunn County Road Dept., updates were made on newly paved road segments. 1/20/2022 - Since the August 2021 update, Morton, Stark, Hettinger, Bowman, Adams, Slope, Grant and Sioux Counties have been updated using 2020 imagery. Surface type has been checked and updated on all functionally classified roads statewide. Function Class changes have been made in the Bismarck/Mandan Metro, Grand Forks County and Burleigh County.6/15/21 - Since the 2019 update, trails and seldom used trails were updated statewide using 2018,and 2019 imagery. Steele, Traill and Griggs Counties have also been updated using 2020 imagery. Surface type has been checked and updated on all functionally classified roads statewide New roads added includes roads in the Fargo, West Fargo, Grand Forks, Jamestown, Bismarck, Mandan, Minot, Dickinson, Watford City and Williston. Ownership on Federal jurisdiction roads were also updated based on an dataset received for FHWA in conjunction with the HPMS submittal. HPMS (Highway Performance Monitoring System) fields were also added in an effort to integrate the roads county data into HPMS and MIRE (Model Inventory Roadway Elements). 9/14/20 - Added the following fields - AADT, AADT_YR, HPMS_MAINTENANCE_OPERATIONS, HPMS_THROUGH_LANES, FUNCTIONAL_CLASS (replaces FUNCTION_CLASS)8/13/19 - The following counties were updated by using a variety of aerial photography: Eddy, Foster and Barnes. Seldom used trails have been added to Barnes, Benson, Billings, Bottineau, and Bowman Counties. Mercer County had (2) 61STAvenues, this has been corrected.12/26/18 - The following counties have had their roads updated by a variety of aerial photography, McHenry, Wells, Kidder, Cass (with aid of Cass county website) and McKenzie (with aid of McKenzie County GIS Coordinator)8/14/18 - Counties updated using 2017 NAIP Imagery are Ward, Mountrail, Burke and Renville counties. Seldom used trails are also being digitized into the dataset. They are being added as counties are being checked, so it will take some time for all seldom used trails to be added statewide. Also since the last update, all local roads that are in the corporate boundaries have been broken at the boundaries so it is easier to query to determine which roads go with each community.5/21/18 - removed CITY_INT_ID column - no longer used because of CITY_FIPS and HPMS_URBAN_CODE attributes. Removed SERVICE_LEVEL field, never used/maintained.4/19/18 - added HPMS_OWNERSHIP and HPMS_FACILITY fields for HPMS submittal1/24/18 - added CITY_FIPS and HPMS_URBAN_CODE attributes/domains. These columns will replace CITY_INT_ID and SOURCE_ID columns (eventually).11/15/17 - Williams, Divide and Bottineau counties have been updated. Great effort has been taken to update attributes and QC null fields. Functional Classified roads in Bismarck and Mandan have been updated as have local roads in Bismarck, Mandan, Williston, Fargo – West Fargo and Minot. 1/25/17 - started to maintain roads in Esri's Road and Highways. The shapes now contain measures in miles along with the associated linear referencing/roads and highways fields. Removed INSET_ASSOC field and added COUNTY_FIPS field.Updates include the counties of Emmons, Logan, McIntosh, Lamoure, Dickey, Ransom, Sargent and Richland. These counties were updated using a combination of the available NAIP aerials, the DES aerials, and by car within the insets. In addition to these updates, the whole county dataset was edited using Data Reviewer checks. The checks ran included unnecessary nodes, non-linear segments, invalid geometry, Duplicate vertices with a tolerance of .5 meters, polyline closes of self, checked for cutbacks using a 15 degree minimum angle, checked for polyline length check using a distance less than 10 meters, checked for multipart lines, inspected dangles with a tolerance of 10 meters, and checked for orphans. All checks were inspected and fixed where appropriate.7/16/14 - updates include: Traill, Barnes, Stutsman, Kidder, Bowman, Slope, Stark, Hettinger, Adams, Grant, Sioux and Morton. These datasets were updated using a combination of the available NAIP aerials, the DES aerials, and by car within the insets.10/22/12 - city streets were updated in Bismarck, Dickinson, Minot and Williston. GIS data from the city of Bismarck was used to update Bismarck, GIS data and 2012 aerial photography was used to update the city of Williston, Minot’s city map and the 2010 aerial photography from Ward County was used to update Minot, and 2011 aerial photography and Dickinson’s "working" city map was used to update Dickinson. The counties updated were Williams, Burke, Bottineau, Mountrail, Ward, Wells, Eddy, Foster, Griggs, Steele, and Cass. At the time of this updated, approximately 50% of Stutsman and 50% of Traill Counties are updated. Williams, Bottineau, Ward, and Mountrail roads were inspected from the air and the 2009 NAIP photos were also used to assist the updates. The roads in Williams County were also recoded to match Williams County naming conventions. Williams County CADD map which is on the Williams county web site was used in updating the road names. In Ward County, the 2010 image from Ward County was used to assist in updating Ward County. The 2010 NAIP photos were used to update Wells, Eddy, Foster, Griggs and Steele Counties. Cass was updated with the assistance of the Cass County GIS layer and the 2011 Cass county imagery. 10/3/2011 - County roads were edited in the cities of Fargo, West Fargo, Horace, Minot, Bismarck, Devils Lake, Grafton, Williston, Valley City, and Dickinson. Also, a part of Ward and Mchenry Counties was edited and the county of Renville has been updated. The business routes through Bismarck and Jamestown were also edited. 5/9/2011 - Updated streets in Bismarck, Mandan, Jamestown, Dickinson, West Fargo ( not quite finished yet), and Valley City. Also, corrected the north - south roads in Township 144N Ranges 49 - 53 E, (in Traill County) 10/5/10 - The original Roads_County data was maintained in two separate ArcInfo coverages and then combined each year and exported to the NDHUB infrastructure. These two coverages have now been combined into one SDE feature class and is being edited within the SDE environment. The following changes have been made to feature class. Deleted all the A1 and A2 Fields so a person would have to hunt back and forth to find a road name. Road names consist of the following fields: RTE_ID, STR_TYP, SUF_DIR, & LAN_DIR. The CMC route numbers were moved from the A1_ prefixed fields to the CMC field to better track the CMC route. Created a County Highway field so we can enter the county road number. It consists of the counties name and number. This is still a work in progress. Created FS_RD_Number and FS_RD_Name fields to better track Forest Service roads. Created Bia-RD_Number and BIA_RD_Name fields to better track Bureau of Indian Affairs roads. The following field changes are used for NDDOT specific processes: Created a service level field which is something that may be used in the future. Currently it contains how Walsh County prioritizes their roads. Created a Through and Connecting Route field so we can so select routes through the towns and cities. This was created exclusively for the county base maps. Created an Inset Associated field. This was created so the information in the rd_misc would come into the county routes. In the future, it is planned to be deleted. 6/18/09 - Updated county routes from aerial observation and photo interpretation using 2003, 2005, 2006 NAIP photos and 2008 photography from Designs camera. Counties updated were Golden Valley, Billings, McKenzie, Dunn, Mercer, Oliver, McLean, Sheridan and Burleigh. City streets were rectified in these counties using the 2003 NAIP photos. Observations were performed by Steven Nelson. 4/17/08 - Updated road surface types in NE. Rolette, Pierce, Benson, Towner, Ramsey, Cavalier, Pembina, Walsh, Grand Forks and Nelson from the 2006 aerial observations by Dewaine Olson 2/13/07 - Updated via 2004 NAIP photos: Barnes, Cass, Eddy, Foster, Griggs, Kidder, Steele, Stutsman, Traill, Wells. Combined Misc Roads and County Roads. Blank fields mean unknown attribute. Use P_STREET_NAME for dynamic labeling. We are also in the process of removing all proposed roads. 12/28/05 - Counties updated: Emmons, Logan, Mcintosh, Lamoure, Dickey, Ransom, Sargent, Richland, Divide, Williams, Burke, Mountrail, Ward, Renville, Bottineau, and Mchenry This data came from the NDDOT's Mapping Section. The original data was digitized from hand scribed maps and registered
Not seeing a result you expected?
Learn how you can add new datasets to our index.
This map contains cemeteries located within Dickinson County. The layers contain cemetery boundaries, additions to cemeteries, blocks, lots, and grave spaces. Information has been provided from the local cemetery and is updated as the cemetery board provides new data.