In 2025, the degree of urbanization worldwide was at 58 percent. North America, Latin America, and the Caribbean were the regions with the highest level of urbanization, with over four-fifths of the population residing in urban areas. The degree of urbanization defines the share of the population living in areas defined as "cities". On the other hand, less than half of Africa's population lives in urban settlements. Globally, China accounts for over one-quarter of the built-up areas of more than 500,000 inhabitants. The definition of a city differs across various world regions - some countries count settlements with 100 houses or more as urban, while others only include the capital of a country or provincial capitals in their count. Largest agglomerations worldwideThough North America is the most urbanized continent, no U.S. city was among the top ten urban agglomerations worldwide in 2023. Tokyo-Yokohama in Japan was the largest urban area in the world that year, with 37.7 million inhabitants. New York ranked 13th, with 21.4 million inhabitants. Eight of the 10 most populous cities are located in Asia. ConnectivityIt may be hard to imagine how the reality will look in 2050, with 70 percent of the global population living in cities, but some statistics illustrate the ways urban living differs from suburban and rural living. American urbanites may lead more “connected” (i.e., internet-connected) lives than their rural and/or suburban counterparts. As of 2021, around 89 percent of people living in urban areas owned a smartphone. Internet usage was also higher in cities than in rural areas. On the other hand, rural areas always have, and always will, attract those who want to escape the rush of the city.

How many incorporated places are registered in the U.S.?

There were 19,502 incorporated places registered in the United States as of July 31, 2019. 16,410 had a population under 10,000 while, in contrast, only 10 cities had a population of one million or more.

Small-town America

Suffice it to say, almost nothing is more idealized in the American imagination than small-town America. When asked where they would prefer to live, 30 percent of Americans reported that they would prefer to live in a small town. Americans tend to prefer small-town living due to a perceived slower pace of life, close-knit communities, and a more affordable cost of living when compared to large cities.

An increasing population

Despite a preference for small-town life, metropolitan areas in the U.S. still see high population figures, with the New York, Los Angeles, and Chicago metro areas being the most populous in the country. Metro and state populations are projected to increase by 2040, so while some may move to small towns to escape city living, those small towns may become more crowded in the upcoming decades.

In 2023, there were approximately ***** million people living in rural areas in the United States, while about ****** million people were living in urban areas. Within the provided time period, the number of people living in urban U.S. areas has increased significantly since totaling only ****** million in 1960.

This map is part of an interactive Story Map series about global change in the US.With the global human population expected to exceed 8 billion people by 2030, our species is already irreversibly changing the future of our planet. The US itself is expected to grow by 16.5% to over 360 million people, making it the third largest country in the world, behind India and China. This population increase isn’t distributed evenly - 81% of people will live in cities, urban, and suburban areas, which will continue to shape how resources are produced, transported, and consumed. The percent of foreign-born and second-generation immigrants in the US is also expected to rise in the future, contributing to an increasingly diverse population. Across the globe, immigration will likely account for significant population changes in the near future, as climate change fuels drought, crop failures, and political instability, creating climate refugees particularly among countries who do not have the infrastructure to mitigate or adapt to global change. Numbers aren’t the only thing that matter: people of different socioeconomic backgrounds use resources differently, both within and between countries.If the rest of the world used energy as intensely as the United States does, the world population would need more than 4 entire Earths to provide us with the resources to feed this rate consumption. This unfortunately means that even regions of the US that contribute less towards the problems of global change will still feel their impacts. To ensure a high quality of life for all citizens, we must address not only population growth, but also excess consumption of and reliance on resources across different regions. Geographic, population, and economic differences among regions can provide opportunities for success in the face of global change. Renewable energy sources have created entrepreneurial economic ventures, and communities have found environmental solutions through forming sustainable local food systems. Environmental justice movements are working now to ensure that all citizens have access to nature, recreational areas, and a healthy future for all.

This map layer shows the prevalent generations that make up the population of the United States using multiple scales. As of 2018, the most predominant generations in the U.S. are Baby Boomers (born 1946-1964), Millennials (born 1981-1998), and Generation Z (born 1999-2016). Currently, Millennials are the most predominant population in the U.S.A generation represents a group of people who are born around the same time and experience world events and trends during the same stage of life through similar mediums (for example, online, television, print, or radio). Because of this, people born in the same generation are expected to have been exposed to similar values and developmental experiences, which may cause them to exhibit similar traits or behaviors over their lifetimes. Generations provide scientists and government officials the opportunity to measure public attitudes on important issues by people’s current position in life and document those differences across demographic groups and geographic regions. Generational cohorts also give researchers the ability to understand how different developmental experiences, such as technological, political, economic, and social changes, influence people’s opinions and personalities. Studying people in generational groups is significant because an individual’s age is a conventional predictor for understanding cultural and political gaps within the U.S. population.Though there is no exact equation to determine generational cutoff points, it is understood that we designate generational spans based on a 15- to 20-year gap. The only generational period officially designated by the U.S. Census Bureau is based on the surge of births after World War II in 1946 and a significant decline in birth rates after 1964 (Baby Boomers). From that point, generational gaps have been determined by significant political, economic, and social changes that define one’s formative years (for example, Generation Z is considered to be marked by children who were directly affected by the al Qaeda attacks of September 11, 2001).In this map layer, we visualize six active generations in the U.S., each marked by significant changes in American history:The Greatest Generation (born 1901-1924): Tom Brokaw’s 1998 book, The Greatest Generation, coined the term ‘the Greatest Generation” to describe Americans who lived through the Great Depression and later fought in WWII. This generation had significant job and education opportunities as the war ended and the postwar economic booms impacted America.The Silent Generation (born 1925-1945): The title “Silent Generation” originated from a 1951 essay published in Time magazine that proposed the idea that people born during this period were more cautious than their parents. Conflict from the Cold War and the potential for nuclear war led to widespread levels of discomfort and uncertainty throughout the generation.Baby Boomers (born 1946-1964): Baby Boomers were named after a significant increase in births after World War II. During this 20-year span, life was dramatically different for those born at the beginning of the generation than those born at the tail end of the generation. The first 10 years of Baby Boomers (Baby Boomers I) grew up in an era defined by the civil rights movement and the Vietnam War, in which a lot of this generation either fought in or protested against the war. Baby Boomers I tended to have great economic opportunities and were optimistic about the future of America. In contrast, the last 10 years of Baby Boomers (Baby Boomers II) had fewer job opportunities and available housing than their Boomer I counterparts. The effects of the Vietnam War and the Watergate scandal led a lot of second-wave boomers to lose trust in the American government. Generation X (born 1965-1980): The label “Generation X” comes from Douglas Coupland’s 1991 book, Generation X: Tales for An Accelerated Culture. This generation was notoriously exposed to more hands-off parenting, out-of-home childcare, and higher rates of divorce than other generations. As a result, many Gen X parents today are concerned about avoiding broken homes with their own kids.Millennials (born 1981-1998): During the adolescence of Millennials, America underwent a technological revolution with the emergence of the internet. Because of this, Millennials are generally characterized by older generations to be technologically savvy.Generation Z (born 1999-2016): Generation Z or “Zoomers” represent a generation raised on the internet and social media. Gen Z makes up the most ethnically diverse and largest generation in American history. Like Millennials, Gen Z is recognized by older generations to be very familiar with and/or addicted to technology.Questions to ask when you look at this mapDo you notice any trends with the predominant generations located in big cities? Suburbs? Rural areas?Where do you see big clusters of the same generation living in the same area?Which areas do you see the most diversity in generations?Look on the map for where you, your parents, aunts, uncles, and grandparents live. Do they live in areas where their generation is the most predominant?

Disclaimer: These data are updated by the author and are not an official product of the Federal Reserve Bank of Cleveland.This project provides two sets of migration estimates for the major US metro areas. The first series measures net migration of people to and from the urban neighborhoods of the metro areas. The second series covers all neighborhoods but breaks down net migration to other regions by four region types: (1) high-cost metros, (2) affordable, large metros, (3) midsized metros, and (4) small metros and rural areas. These series were introduced in a Cleveland Fed District Data Brief entitled “Urban and Regional Migration Estimates: Will Your City Recover from the Pandemic?"The migration estimates in this project are created with data from the Federal Reserve Bank of New York/Equifax Consumer Credit Panel (CCP). The CCP is a 5 percent random sample of the credit histories maintained by Equifax. The CCP reports the census block of residence for over 10 million individuals each quarter. Each month, Equifax receives individuals’ addresses, along with reports of debt balances and payments, from creditors (mortgage lenders, credit card issuers, student loan servicers, etc.). An algorithm maintained by Equifax considers all of the addresses reported for an individual and identifies the individual’s most likely current address. Equifax anonymizes the data before they are added to the CCP, removing names, addresses, and Social Security numbers (SSNs). In lieu of mailing addresses, the census block of the address is added to the CCP. Equifax creates a unique, anonymous identifier to enable researchers to build individuals’ panels. The panel nature of the data allows us to observe when someone has migrated and is living in a census block different from the one they lived in at the end of the preceding quarter. For more details about the CCP and its use in measuring migration, see Lee and Van der Klaauw (2010) and DeWaard, Johnson and Whitaker (2019). DefinitionsMetropolitan areaThe metropolitan areas in these data are combined statistical areas. This is the most aggregate definition of metro areas, and it combines Washington DC with Baltimore, San Jose with San Francisco, Akron with Cleveland, etc. Metro areas are combinations of counties that are tightly linked by worker commutes and other economic activity. All counties outside of metropolitan areas are tracked as parts of a rural commuting zone (CZ). CZs are also groups of counties linked by commuting, but CZ definitions cover all counties, both metropolitan and non-metropolitan. High-cost metropolitan areasHigh-cost metro areas are those where the median list price for a house was more than $200 per square foot on average between April 2017 and April 2022. These areas include San Francisco-San Jose, New York, San Diego, Los Angeles, Seattle, Boston, Miami, Sacramento, Denver, Salt Lake City, Portland, and Washington-Baltimore. Other Types of RegionsMetro areas with populations above 2 million and house price averages below $200 per square foot are categorized as affordable, large metros. Metro areas with populations between 500,000 and 2 million are categorized as mid-sized metros, regardless of house prices. All remaining counties are in the small metro and rural category.To obtain a metro area's total net migration, sum the four net migration values for the the four types of regions.Urban neighborhoodCensus tracts are designated as urban if they have a population density above 7,000 people per square mile. High density neighborhoods can support walkable retail districts and high-frequency public transportation. They are more likely to have the “street life” that people associate with living in an urban rather than a suburban area. The threshold of 7,000 people per square mile was selected because it was the average density in the largest US cities in the 1930 census. Before World War II, workplaces, shopping, schools and parks had to be accessible on foot. Tracts are also designated as urban if more than half of their housing units were built before WWII and they have a population density above 2,000 people per square mile. The lower population density threshold for the pre-war neighborhoods recognizes that many urban tracts have lost population since the 1960s. While the street grids usually remain, the area also needs su

Population Numbers By New York City Neighborhood Tabulation Areas

The data was collected from Census Bureaus' Decennial data dissemination (SF1). Neighborhood Tabulation Areas (NTAs), are aggregations of census tracts that are subsets of New York City's 55 Public Use Microdata Areas (PUMAs). Primarily due to these constraints, NTA boundaries and their associated names may not definitively represent neighborhoods. This report shows change in population from 2000 to 2010 for each NTA. Compiled by the Population Division – New York City Department of City Planning.

In 2021, over half of Gen Z adults surveyed lived in suburban areas in the United States. The survey also found that the suburbs were the most preferred location for Gen Zers, with ** percent of respondents sharing that this is where they would want to buy a home in the future. Urban areas came second in popularity with approximately ********* of respondents choosing them as a preferred location.

This dataset contains polygons that represent the boundaries of statistical neighborhoods as defined by the DC Department of Health (DC Health). DC Health delineates statistical neighborhoods to facilitate small-area analyses and visualization of health, economic, social, and other indicators to display and uncover disparate outcomes among populations across the city. The neighborhoods are also used to determine eligibility for some health services programs and support research by various entities within and outside of government. DC Health Planning Neighborhood boundaries follow census tract 2010 lines defined by the US Census Bureau. Each neighborhood is a group of between one and seven different, contiguous census tracts. This allows for easier comparison to Census data and calculation of rates per population (including estimates from the American Community Survey and Annual Population Estimates). These do not reflect precise neighborhood locations and do not necessarily include all commonly-used neighborhood designations. There is no formal set of standards that describes which neighborhoods are included in this dataset. Note that the District of Columbia does not have official neighborhood boundaries. Origin of boundaries: each neighborhood is a group of between one and seven different, contiguous census tracts. They were originally determined in 2015 as part of an analytical research project with technical assistance from the Centers for Disease Control and Prevention (CDC) and the Council for State and Territorial Epidemiologists (CSTE) to define small area estimates of life expectancy. Census tracts were grouped roughly following the Office of Planning Neighborhood Cluster boundaries, where possible, and were made just large enough to achieve standard errors of less than 2 for each neighborhood's calculation of life expectancy. The resulting neighborhoods were used in the DC Health Equity Report (2018) with updated names. HPNs were modified slightly in 2019, incorporating one census tract that was consistently suppressed due to low numbers into a neighboring HPN (Lincoln Park incorporated into Capitol Hill). Demographic information were analyzed to identify the bordering group with the most similarities to the single census tract. A second change split a neighborhood (GWU/National Mall) into two to facilitate separate analysis.

Table from the American Community Survey (ACS) 5-year series on household types and population related topics for City of Seattle Council Districts, Comprehensive Plan Growth Areas and Community Reporting Areas. Table includes B11003 Family Type by Presence and Age of Own Children under 18 Years, B11005 Households by Presence of People Under 18 Years by Household Type, B11007 Households by Presence of People 65 Years and Over by Household Type, B11001 Household Type (Including Living Alone), B11002 Household Type by Relatives and Nonrelatives for Population in Households, B25003 Tenure, B25008 Total Population in Occupied Housing Units by Tenure, B09019 Household Type (Including Living Alone) by Relationship. Data is pulled from block group tables for the most recent ACS vintage and summarized to the neighborhoods based on block group assignment.Table created for and used in the Neighborhood Profiles application.Vintages: 2023ACS Table(s): B11003, B11005, B11007, B11001, B11002, B25003, B25008, B09019Data downloaded from: Census Bureau's Explore Census Data The United States Census Bureau's American Community Survey (ACS):<a href='https://www.census.gov/programs-surveys/acs/about.html' style='color:rgb(0, 121, 193); text-decoration-line:none; font-family:inherit;' target='_blank' rel=

In 2023, the metropolitan area of New York-Newark-Jersey City had the biggest population in the United States. Based on annual estimates from the census, the metropolitan area had around 19.5 million inhabitants, which was a slight decrease from the previous year. The Los Angeles and Chicago metro areas rounded out the top three. What is a metropolitan statistical area? In general, a metropolitan statistical area (MSA) is a core urbanized area with a population of at least 50,000 inhabitants – the smallest MSA is Carson City, with an estimated population of nearly 56,000. The urban area is made bigger by adjacent communities that are socially and economically linked to the center. MSAs are particularly helpful in tracking demographic change over time in large communities and allow officials to see where the largest pockets of inhabitants are in the country. How many MSAs are in the United States? There were 421 metropolitan statistical areas across the U.S. as of July 2021. The largest city in each MSA is designated the principal city and will be the first name in the title. An additional two cities can be added to the title, and these will be listed in population order based on the most recent census. So, in the example of New York-Newark-Jersey City, New York has the highest population, while Jersey City has the lowest. The U.S. Census Bureau conducts an official population count every ten years, and the new count is expected to be announced by the end of 2030.

Although the average rate of unemployment across U.S. metropolitan areas declined between 1980 and 2000, the geographic concentration of the unemployed rose sharply over this period. That is, residential neighborhoods throughout the nation's metropolitan areas became increasingly divided into high- and low-unemployment areas. This paper documents this trend using data on more than 165,000 U.S. Census block groups (neighborhoods) in 361 metropolitan areas over the years 1980, 1990, and 2000. It also examines three potential explanations: (i) urban decentralization, (ii) industrial shifts and declining unionization, and (iii) increasing segregation by income and education. The results offer little support for either of the first two explanations. Rising residential concentration of the unemployed shows little association with changes in population density, industrial composition, or union activity. It does, however, show a significant association with both the degree of segregation according to income as well as education, suggesting that decreases in the extent to which individuals with different levels of income and education live in the same neighborhood may help account for this trend.

A dataset listing New York cities by population for 2024.

Table from the American Community Survey (ACS) 5-year series on household types and population related topics for City of Seattle Council Districts, Comprehensive Plan Growth Areas and Community Reporting Areas. Table includes B11003 Family Type by Presence and Age of Own Children under 18 Years, B11005 Households by Presence of People Under 18 Years by Household Type, B11007 Households by Presence of People 65 Years and Over by Household Type, B11001 Household Type (Including Living Alone), B11002 Household Type by Relatives and Nonrelatives for Population in Households, B25003 Tenure, B25008 Total Population in Occupied Housing Units by Tenure, B09019 Household Type (Including Living Alone) by Relationship. Data is pulled from block group tables for the most recent ACS vintage and summarized to the neighborhoods based on block group assignment.Table created for and used in the Neighborhood Profiles application.Vintages: 2023ACS Table(s): B11003, B11005, B11007, B11001, B11002, B25003, B25008, B09019Data downloaded from: Census Bureau's Explore Census Data The United States Census Bureau's American Community Survey (ACS):About the SurveyGeography & ACSTechnical DocumentationNews & UpdatesThis ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the Census and ACS when using this data.Data Note from the Census:Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables.Data Processing Notes:Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto RicoCensus tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99).Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey.Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate.Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate.The estimate is controlled. A statistical test for sampling variability is not appropriate.The data for this geographic area cannot be displayed because the number of sample cases is too small.

This dataset contains polygons that represent the boundaries of statistical neighborhoods as defined by the DC Department of Health (DC Health). DC Health delineates statistical neighborhoods to facilitate small-area analyses and visualization of health, economic, social, and other indicators to display and uncover disparate outcomes among populations across the city. The neighborhoods are also used to determine eligibility for some health services programs and support research by various entities within and outside of government. DC Health Planning Neighborhood boundaries follow census tract 2010 lines defined by the US Census Bureau. Each neighborhood is a group of between one and seven different, contiguous census tracts. This allows for easier comparison to Census data and calculation of rates per population (including estimates from the American Community Survey and Annual Population Estimates). These do not reflect precise neighborhood locations and do not necessarily include all commonly-used neighborhood designations. There is no formal set of standards that describes which neighborhoods are included in this dataset. Note that the District of Columbia does not have official neighborhood boundaries. Origin of boundaries: each neighborhood is a group of between one and seven different, contiguous census tracts. They were originally determined in 2015 as part of an analytical research project with technical assistance from the Centers for Disease Control and Prevention (CDC) and the Council for State and Territorial Epidemiologists (CSTE) to define small area estimates of life expectancy. Census tracts were grouped roughly following the Office of Planning Neighborhood Cluster boundaries, where possible, and were made just large enough to achieve standard errors of less than 2 for each neighborhood's calculation of life expectancy. The resulting neighborhoods were used in the DC Health Equity Report (2018) with updated names. HPNs were modified slightly in 2019, incorporating one census tract that was consistently suppressed due to low numbers into a neighboring HPN (Lincoln Park incorporated into Capitol Hill). Demographic information were analyzed to identify the bordering group with the most similarities to the single census tract. A second change split a neighborhood (GWU/National Mall) into two to facilitate separate analysis.

A dataset listing the 20 richest cities in Oklahoma for 2024, including information on rank, city, county, population, average income, and median income.

Supermarkets are one of the most popular and convenient ways in which Americans gain access to healthy food, such as fresh meat and fish, or fresh fruits and vegetables. There are various ways in which people gain access to supermarkets. People in the suburbs drive to supermarkets and load up the car with many bags of food. People in cities depend much more on walking to the local store, or taking a bus or train.This map came about after asking a simple question: how many Americans live within a reasonable walk or drive to a supermarket?In this case, "reasonable" was defined as a 10 minute drive, or a 1 mile walk. The ArcGIS Network Analyst extension performed the calculations on streets data from StreetMap Premium, and the ArcGIS Spatial Analyst extension created a heat map of the walkable access and drivable access to supermarkets.The green dots represent populations in poverty who live within one mile of a supermarket. The red dots represent populations in poverty who live beyond a one mile walk to a supermarket, but may live within a 10 minute drive...which presumes they have access to a car or public transit. The grey dots represent the total population in a given area.This is an excellent map to use as backdrop to show how people are improving access to healthy food in their community. Open this map in ArcGIS Pro or ArcGIS Online to use it as a backdrop to your local analysis work. Or open it in ArcGIS Explorer to add your favorite farmers' market, CSA, or transit line -- then share that map via Facebook, Twitter or email. See this web map for a map with a popup layer.This map shows data for the entire U.S. The supermarkets included in the analysis have annual sales of $1 million or more.Data source: see this map package.

A dataset listing the 20 richest cities in Illinois for 2024, including information on rank, city, county, population, average income, and median income.

Supermarkets are one of the most popular and convenient ways in which Americans gain access to healthy food, such as fresh meat and fish, or fresh fruits and vegetables. There are various ways in which people gain access to supermarkets. People in the suburbs drive to supermarkets and load up the car with many bags of food. People in cities depend much more on walking to the local store, or taking a bus or train.This map came about after asking a simple question: how many Americans live within a reasonable walk or drive to a supermarket?In this case, "reasonable" was defined as a 10 minute drive, or a 1 mile walk. The ArcGIS Network Analyst extension performed the calculations on NAVTEQ streets, and the ArcGIS Spatial Analyst extension created a heat map of the walkable access and drivable access to supermarkets.The green dots represent populations in poverty who live within one mile of a supermarket. The red dots represent populations in poverty who live beyond a one mile walk to a supermarket, but may live within a 10 minute drive...assuming they have access to a car. The grey dots represent the total population in a given area.This is an excellent map to use as backdrop to show how people are improving access to healthy food in their community. Open this map in ArcGIS Explorer to add your favorite farmers' market, CSA, or transit line -- then share that map via Facebook, Twitter or email.This map shows data for the entire U.S. The supermarkets included in the analysis have annual sales of $1 million or more. Populations in poverty are represented by taking the block group poverty rate (e.g. 10%) from the Census and symbolizing each block in that block group based on that percentage. Demographic data from U.S. Census 2010 and Esri Business location from infoUSAData sources: see this map package.

Among the 81 largest metropolitan areas (by population) in the United States, Knoxville, Tennessee was ranked first with **** percent of residents reporting as white, non-Hispanic in 2023.