The metropolitan influence zone classification, developed by researchers at Statistics Canada, classifies communities (census subdivisions) that lie outside census metropolitan areas (CMAs) and census agglomerations (CAs) according to the degree of influence that CMA/CAs have on them. The classification was used in this mapping project on quality of life to compare similar communities (or census subdivisions), in order to recognize inherent differences in the social and economic characteristics of different communities and differences in their geographic locations, which may have important influences on quality of life.

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census. 2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts (2016 Census Dictionary, catalogue number 98-301-X2016001). 3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA). 4 The population growth, which is used to calculate population estimates of census metropolitan areas and census agglomerations (table 17100135), is comprised of the components of population growth (table 17100136). 5 This table replaces table 17100079. 6 The components of population growth for census metropolitan areas (CMAs) and census agglomerations (CAs) sometimes had to be calculated using information at the census division level, using the geographic conversion method. This method involves using the population component calculated at the level of the CD(s) in which the CMA or CA is located and applying a ratio corresponding to the proportion of the CMA or CA population included in the corresponding CD(s). For periods prior to 2005/2006, all demographic components for all CMAs and CAs were calculated using geographic conversions. For the periods from 2005/2006 to 2010/2011 inclusively, emigration and internal migration components for areas that were not CMAs according to the 2011 SGC were calculated using geographic conversions. For the periods 2011/2012 to 2015/2016 inclusively, the emigration and internal migration components of regions that were not CMAs or CAs according to the 2011 SGC were calculated using geographic conversions. For the relevant demographic components, trends should be interpreted with caution where the method of calculation has changed over time. This caveat applies particularly to the intraprovincial migration component, for which the assumptions of the geographic conversion method are more at risk of not being met. 7 Period from July 1 to June 30. 8 Age on July 1. 9 The estimates for net non-permanent residents are preliminary for 2020/2021, updated for 2019/2020 final up to 2018/2019. 10 Non-permanent residents (NPRs) are persons who are lawfully in Canada on a temporary basis under the authority of a temporary resident permit, along with members of their family living with them. NPRs include foreign workers, foreign students, the humanitarian population and other temporary residents. The humanitarian population includes refugee claimants and temporary residents who are allowed to remain in Canada on humanitarian grounds and are not categorized as either foreign workers or foreign students.

Annual population estimates as of July 1st, by census metropolitan area and census agglomeration, single year of age, five-year age group and gender, based on the Standard Geographical Classification (SGC) 2021.

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census. 2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts (2016 Census Dictionary, catalogue number 98-301-X2016001). 3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA). 4 The population growth, which is used to calculate population estimates of census metropolitan areas and census agglomerations (table 17100135), is comprised of the components of population growth (table 17100136). 5 This table replaces table 17100079. 6 The components of population growth for census metropolitan areas (CMAs) and census agglomerations (CAs) sometimes had to be calculated using information at the census division level, using the geographic conversion method. This method involves using the population component calculated at the level of the CD(s) in which the CMA or CA is located and applying a ratio corresponding to the proportion of the CMA or CA population included in the corresponding CD(s). For periods prior to 2005/2006, all demographic components for all CMAs and CAs were calculated using geographic conversions. For the periods from 2005/2006 to 2010/2011 inclusively, emigration and internal migration components for areas that were not CMAs according to the 2011 SGC were calculated using geographic conversions. For the periods 2011/2012 to 2015/2016 inclusively, the emigration and internal migration components of regions that were not CMAs or CAs according to the 2011 SGC were calculated using geographic conversions. For the relevant demographic components, trends should be interpreted with caution where the method of calculation has changed over time. This caveat applies particularly to the intraprovincial migration component, for which the assumptions of the geographic conversion method are more at risk of not being met. 7 Period from July 1 to June 30. 8 Age on July 1. 9 The estimates for deaths are preliminary for 2020/2021, updated for 2019/2020 and final up to 2018/2019. Preliminary and updated estimates of deaths were produced by Demography Division, Statistics Canada (see definitions, data sources and methods record number 3601 and 3608) with the exception of Quebec's data which are taken from the estimates of "l'Institut de la statistique du Québec" (ISQ) and then adjusted to Statistics Canada's provincial estimates. Final data were produced by Health Statistics Division Statistics Canada (see definitions data sources and methods record number 3233). However before 2011 the final estimates may differ from the data released by the Health Statistics Division due to the imputation of certain unknown values. In addition for estimates of deaths the age represents age at the beginning of the period (July 1st) and not the age at the time of occurrence as with the Health Statistics Division data."

The footnotes in the table are represented in brackets.Footnotes:1 2011 and 2006 population Statistics Canada is committed to protect the privacy of all Canadians and the confidentiality of the data they provide to us. As part of this commitment, some population counts of geographic areas are adjusted in order to ensure confidentiality. Counts of the total population are rounded to a base of 5 for any dissemination block having a population of less than 15. Population counts for all standard geographic areas above the dissemination block level are derived by summing the adjusted dissemination block counts. The adjustment of dissemination block counts is controlled to ensure that the population counts for dissemination areas will always be within 5 of the actual values. The adjustment has no impact on the population counts of census divisions and large census subdivisions.2 Total private dwellings A separate set of living quarters designed for or converted for human habitation in which a person or group of persons reside or could reside. In addition, a private dwelling must have a source of heat or power and must be an enclosed space that provides shelter from the elements, as evidenced by complete and enclosed walls and roof, and by doors and windows that provide protection from wind, rain and snow.3 Private dwellings occupied by usual residents A separate set of living quarters which has a private entrance either directly from outside or from a common hall, lobby, vestibule or stairway leading to the outside, and in which a person or a group of persons live permanently.4 Age Refers to the age at last birthday before the reference date, that is, before May 10, 2011. Refer to the Census Dictionary (https://www12.statcan.gc.ca/census-recensement/2011/ref/dict/pop005-eng.cfm) for more information.5 Median age The median age is an age 'x', such that exactly one half of the population is older than 'x' and the other half is younger than 'x'.

Estimates of life expectancy at birth are provided at the national level (by sex), at the province or regional level, and based on residence within or outside of a census metropolitan area (CMA) for a series of three five-year reference periods beginning in 2006-2011.

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census. 2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts (2016 Census Dictionary, catalogue number 98-301-X2016001). 3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA). 4 Postcensal estimates are based on the latest census counts adjusted for census net undercoverage (including adjustment for incompletely enumerated Indian reserves) and for the estimated population growth that occurred since that census. Intercensal estimates are based on postcensal estimates and census counts adjusted of the censuses preceding and following the considered year. 5 Population estimates as of July 1 are final intercensal up to 2015, final postcensal for 2016 to 2019, updated postcensal for 2020 and preliminary postcensal for 2021. 6 The population growth, which is used to calculate population estimates of census metropolitan areas and census agglomerations (table 17100135), is comprised of the components of population growth (table 17100136). 7 This table replaces table 17100078. 8 Age on July 1.

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census.2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts (2016 Census Dictionary, catalogue number 98-301-X2016001).3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA).4 The population growth, which is used to calculate population estimates of census metropolitan areas and census agglomerations (table 17100135), is comprised of the components of population growth (table 17100136).5 This table replaces table 17100079.6 The components of population growth for census metropolitan areas (CMAs) and census agglomerations (CAs) sometimes had to be calculated using information at the census division level, using the geographic conversion method. This method involves using the population component calculated at the level of the CD(s) in which the CMA or CA is located and applying a ratio corresponding to the proportion of the CMA or CA population included in the corresponding CD(s). For periods prior to 2005/2006, all demographic components for all CMAs and CAs were calculated using geographic conversions. For the periods from 2005/2006 to 2010/2011 inclusively, emigration and internal migration components for areas that were not CMAs according to the 2011 SGC were calculated using geographic conversions. For the periods 2011/2012 to 2015/2016 inclusively, the emigration and internal migration components of regions that were not CMAs or CAs according to the 2011 SGC were calculated using geographic conversions. For the relevant demographic components, trends should be interpreted with caution where the method of calculation has changed over time. This caveat applies particularly to the intraprovincial migration component, for which the assumptions of the geographic conversion method are more at risk of not being met.7 Period from July 1 to June 30.8 Age on July 1.9 The estimates for immigrants are preliminary for 2020/2021 and final up to 2019/2020.

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census. 2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts (2016 Census Dictionary, catalogue number 98-301-X2016001). 3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA). 4 The population growth, which is used to calculate population estimates of census metropolitan areas and census agglomerations (table 17100135), is comprised of the components of population growth (table 17100136). 5 This table replaces table 17100079. 6 The components of population growth for census metropolitan areas (CMAs) and census agglomerations (CAs) sometimes had to be calculated using information at the census division level, using the geographic conversion method. This method involves using the population component calculated at the level of the CD(s) in which the CMA or CA is located and applying a ratio corresponding to the proportion of the CMA or CA population included in the corresponding CD(s). For periods prior to 2005/2006, all demographic components for all CMAs and CAs were calculated using geographic conversions. For the periods from 2005/2006 to 2010/2011 inclusively, emigration and internal migration components for areas that were not CMAs according to the 2011 SGC were calculated using geographic conversions. For the periods 2011/2012 to 2015/2016 inclusively, the emigration and internal migration components of regions that were not CMAs or CAs according to the 2011 SGC were calculated using geographic conversions. For the relevant demographic components, trends should be interpreted with caution where the method of calculation has changed over time. This caveat applies particularly to the intraprovincial migration component, for which the assumptions of the geographic conversion method are more at risk of not being met. 7 Period from July 1 to June 30. 8 Age on July 1. 9 The estimates for immigrants are preliminary for 2020/2021 and final up to 2019/2020.

Footnotes: 1 Sources: Statistics Canada, Canadian Vital Statistics, Birth, Death and Stillbirth Databases. The table 13-10-0110-01 is an update of table 13-10-0408-01. 2 Infant mortality corresponds to the death of a child under one year of age. Expressed as a rate per 1,000 live births. 3 Perinatal deaths include late fetal deaths (stillbirths with a gestational age of 28 weeks or more) and early neonatal deaths (deaths of infants aged less than one week). 4 Numbers and rates in this table may differ from those found in similar data published by the Vital Statistics program as the data here have been tabulated based on postal codes available for place of residence. 5 2017 data for Yukon are not available. 6 The number of births, stillbirths, and deaths in Ontario for 2016 and 2017 are considered preliminary. 7 Due to improvements in methodology and timeliness, the duration of data collection has been shortened compared to previous years. As a result, there may have been fewer births and stillbirths captured by the time of the release. The 2017 data are therefore considered preliminary. 8 A census metropolitan area (CMA) is an area consisting of one or more adjacent municipalities situated around a major urban core. To form a census metropolitan area, the urban core must have a population of at least 100,000. The CMAs are those defined for the 2016 Census. To form a census agglomeration, the urban core must have a population of at least 10,000. 9 The metropolitan influenced zone (MIZ) classification is an approach to better differentiate areas of Canada outside of census metropolitan areas and census agglomerations. Census subdivisions that lie outside these areas are classified into one of four zones of influence. They are assigned to categories based on the flow of residents travelling to work in an urban area with a population greater than 10,000. Municipalities where more that 30% of the residents commute to work in an urban core are assigned to the strong MIZ category. Municipalities where between 5% and 30% of the residents commute to work in an urban core are assigned to the moderate MIZ category. Municipalities where between 0% and 5% of the residents commute to work in an urban core are assigned to the weak MIZ category. Municipalities where fewer than 40 or none of the residents commute to work in an urban core are assigned to the zero MIZ category. 10 Geographical areas are modified every 5 years to reflect the most recent census definitions, therefore, data are not strictly comparable historically. 11 Counts and rates in this table are based on three consecutive years of data. 12 The 95% confidence interval (CI) illustrates the degree of variability associated with a rate. 13 Wide confidence intervals (CIs) indicate high variability, thus, these rates should be interpreted and compared with due caution. 14 The following standard symbols are used in this Statistics Canada table: (..) for figures not available for a specific reference period, (...) for figures not applicable and (x) for figures suppressed to meet the confidentiality requirements of the Statistics Act. 15 The figures shown in the tables have been subjected to a confidentiality procedure known as controlled rounding to prevent the possibility of associating statistical data with any identifiable individual. Under this method, all figures, including totals and margins, are rounded either up or down to a multiple of 5. Controlled rounding has the advantage over other types of rounding of producing additive tables as well as offering more protection.

Income of individuals by age group, sex and income source, Canada, provinces and selected census metropolitan areas, annual.

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census. 2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts (2016 Census Dictionary, catalogue number 98-301-X2016001). 3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA). 4 The population growth, which is used to calculate population estimates of census metropolitan areas and census agglomerations (table 17100135), is comprised of the components of population growth (table 17100136). 5 This table replaces table 17100079. 6 The components of population growth for census metropolitan areas (CMAs) and census agglomerations (CAs) sometimes had to be calculated using information at the census division level, using the geographic conversion method. This method involves using the population component calculated at the level of the CD(s) in which the CMA or CA is located and applying a ratio corresponding to the proportion of the CMA or CA population included in the corresponding CD(s). For periods prior to 2005/2006, all demographic components for all CMAs and CAs were calculated using geographic conversions. For the periods from 2005/2006 to 2010/2011 inclusively, emigration and internal migration components for areas that were not CMAs according to the 2011 SGC were calculated using geographic conversions. For the periods 2011/2012 to 2015/2016 inclusively, the emigration and internal migration components of regions that were not CMAs or CAs according to the 2011 SGC were calculated using geographic conversions. For the relevant demographic components, trends should be interpreted with caution where the method of calculation has changed over time. This caveat applies particularly to the intraprovincial migration component, for which the assumptions of the geographic conversion method are more at risk of not being met. 7 Period from July 1 to June 30. 8 Age on July 1. 9 The estimates for net temporary emigration are preliminary for 2020/2021, updated for 2019/2020 final up to 2018/2019. 10 Please note that for the emigration, the returning emigration and the net temporary emigration, the estimates for the most recent periods are expected to be identical or very similar. In the absence of more up-to-date data sources, the assumption is made that levels remain similar.

People who have been granted permanent resident status in Canada. Please note that in these datasets, the figures have been suppressed or rounded to prevent the identification of individuals when the datasets are compiled and compared with other publicly available statistics. Values between 0 and 5 are shown as “--“ and all other values are rounded to the nearest multiple of 5. This may result to the sum of the figures not equating to the totals indicated.

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census. 2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts (2016 Census Dictionary, catalogue number 98-301-X2016001). 3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA). 4 The population growth, which is used to calculate population estimates of census metropolitan areas and census agglomerations (table 17100135), is comprised of the components of population growth (table 17100136). 5 This table replaces table 17100079. 6 The components of population growth for census metropolitan areas (CMAs) and census agglomerations (CAs) sometimes had to be calculated using information at the census division level, using the geographic conversion method. This method involves using the population component calculated at the level of the CD(s) in which the CMA or CA is located and applying a ratio corresponding to the proportion of the CMA or CA population included in the corresponding CD(s). For periods prior to 2005/2006, all demographic components for all CMAs and CAs were calculated using geographic conversions. For the periods from 2005/2006 to 2010/2011 inclusively, emigration and internal migration components for areas that were not CMAs according to the 2011 SGC were calculated using geographic conversions. For the periods 2011/2012 to 2015/2016 inclusively, the emigration and internal migration components of regions that were not CMAs or CAs according to the 2011 SGC were calculated using geographic conversions. For the relevant demographic components, trends should be interpreted with caution where the method of calculation has changed over time. This caveat applies particularly to the intraprovincial migration component, for which the assumptions of the geographic conversion method are more at risk of not being met. 7 Period from July 1 to June 30. 8 Age on July 1. 9 The estimates for net interprovincial migration are preliminary for 2020/2021 and final up to 2019/2020.

Incident-based crime statistics (actual incidents, rate per 100,000 population, percentage change in rate, unfounded incidents, percent unfounded, total cleared, cleared by charge, cleared otherwise, persons charged, adults charged, youth charged / not charged), by detailed violations (violent, property, traffic, drugs, other Federal Statutes), Canada, provinces, territories, Census Metropolitan Areas and Canadian Forces Military Police, 1998 to 2024.

Footnotes: 1 Population estimates based on the Standard Geographical Classification (SGC) 2016 as delineated in the 2016 Census. 2 A census metropolitan area (CMA) or a census agglomeration (CA) is formed by one or more adjacent municipalities centred on a population centre (known as the core). A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core based on adjusted data from the previous Census of Population Program. A CA must have a core population of at least 10,000 also based on data from the previous Census of Population Program. To be included in the CMA or CA, other adjacent municipalities must have a high degree of integration with the core, as measured by commuting flows derived from data on place of work from the previous Census Program. If the population of the core of a CA falls below 10,000, the CA is retired from the next census. However, once an area becomes a CMA, it is retained as a CMA even if its total population declines below 100,000 or the population of its core falls below 50,000. All areas inside the CMA or CA that are not population centres are rural areas. When a CA has a core of at least 50,000, based on data from the previous Census of Population, it is subdivided into census tracts. Census tracts are maintained for the CA even if the population of the core subsequently falls below 50,000. All CMAs are subdivided into census tracts. 3 An area outside census metropolitan areas and census agglomerations is made up of all areas (within a province or territory) unallocated to a census metropolitan area (CMA) or census agglomeration (CA). 4 The estimates for interprovincial and intraprovincial migrants are final. Intraprovincial migrant data for the province of Quebec are taken from the estimates of l'Institut de la statistique du Québec" (ISQ)." 5 This table replaces table 17100087. 6 When adding up migrant flows in this table, small differences may be observed when comparing them with the number of migrants from table 17000136. Those differences are expected and are the results of minor edits necessary to ensure the consistency of the cohort component formula. 7 Period from July 1 to June 30.

Frequency: Occasional Table: 46-10-0038-01 Release date: 2022-04-12 Geography: Province or territory, Census subdivision, Census metropolitan area, Census agglomeration, Census metropolitan area part, Census agglomeration part

Symbol legend: .. / not available for a specific reference period x / suppressed to meet the confidentiality requirements of the Statistics Act A / data quality: excellent The footnotes appear in brackets in text

1) The universe of this table is restricted to individual resident owners who occupy a residential property. An owner's geographic location is determined by the location of the occupied property for both single- and multiple-property owners. A residential property refers to all land and structures intended for private occupancy whether on a permanent or a temporary basis.

2) The geographic boundaries used in this table are the 2016 census subdivisions boundaries.

3) Previous reference period estimates are subject to revision.

4) The Composite Quality Indicator (CQI) shown in this table is created by combining many individual quality indicators, each one representing the quality of different Canadian Housing Statistics Program (CHSP) data processing steps (for example: coding, geocoding, linkage and imputation) and includes the following values: A - Excellent: All domain variables and the variable of interest are of excellent quality. B - Very good: All domain variables and the variable of interest are of very good to excellent quality. C - Good: The quality of some of the domain variables or the variable of interest is considered good while all the other variables are of very good to excellent quality. D - Acceptable: The quality of some of the domain variables or the variable of interest is considered acceptable while all the other variables are of good to excellent quality. E - Use with caution: Several domain variables or the variable of interest are of poor quality. F - Too unreliable to be published. The CQIs are available starting with the reference period of 2020, except for the Northwest Territories where they are available from 2019 reference period.

5) Property type " refers to property characteristics and/or dwelling configuration on which there can be one or more residential structures. Property types include single-detached houses semi-detached houses condominium apartments mobile homes other property types properties with multiple residential units and vacant land."

6) Estimates by property type in Newfoundland and Labrador are only available in the census subdivision of St. John’s.

7) Estimates by property type in Northwest Territories are not available.

8) Estimates by property type in Nunavut are not available.

9) The number of properties owned by the property owner is limited to residential properties that are within a given province.

10) Newfoundland and Labrador estimates are not available at the provincial level and for the category “Outside of census metropolitan areas (CMAs) and census agglomerations (CAs)”.

11) Northwest Territories estimates are only available in the census agglomeration of Yellowknife.

12) A condominium apartment" refers to a set of living quarters that is owned individually while land and common elements are held in joint ownership with others."

13) Counts undergo random rounding, a process that transforms all raw counts into randomly rounded counts. This reduces the possibility of identifying individuals in the tabulations. All percentages are derived from rounded counts, subtotals and totals may not exactly equal the sum of components due to system rounding.

14) The number of property owners estimates are not available for the 2018 reference period.

15) The number of owners should be used with caution outside of census metropolitan areas (CMAs) and census agglomerations (CAs), as well as the proportion of owners by geography. This note does not apply to Nunavut.

16) Assessment value" refers to the assessed value of the property for the purposes of determining property taxes. It is important to note that the assessed value does not necessarily represent the market value. Given that different provinces and territories have their own assessment periods and duration of the valuation roll it is difficult to make accurate comparisons of similar properties from one province or territory to another. For properties that are being utilized for both residential and non-residential purposes only the residential portion's value has been taken into account. The reference years of the assessment values by province or territory are available here: Canadian Housing Statistics Program (CHSP)."

17) For Nunavut, the property use indicator is not available, the universe of this table includes all individual resident owners. For owners with multiple properties, the geographic location and type of property are from the residential property with the highest assessment value.

18) Averages and medians are calculated using values greater than zero for the variables of interest.

19) Total assessment value" represents the sum of the assessment values of all residential properties owned by an owner within a given province."

20) Total income of person" refers to the total income of an individual before deductions for income taxes during the previous year. This income measure is the sum of market income and government transfers. Market income includes employment income investment income private retirement income and other income from market sources during the previous year. Government transfers refer to all cash benefits received from federal provincial territorial or municipal governments during the previous year."

Cite: Statistics Canada. Table 46-10-0038-01 Single and multiple residential property owners: demographic data and value of properties owned https://www150.statcan.gc.ca/t1/tbl1/en/tv.action?pid=4610003801

Health characteristics, two-year period estimates, census metropolitan areas and population centres (1, 2, 3, 4, 5, 6, 7, 8, 9)Frequency: OccasionalTable: 13-10-0805-01 (formerly CANSIM 105-0593)Release date: 2022-04-19Geography: Canada, Province or territory, , Census metropolitan area, Census metropolitan area partFootnotes: 1 Source: Statistics Canada, Canadian Community Health Survey (CCHS).2 All estimates in this table are calculated excluding non-response categories (refusal"3 Data for the Canadian Community Health Survey (CCHS) are collected yearly from a sample of approximately 65,000 respondents. The table 13-10-0805-01 presents estimates from two-year combined data and features breakdown by all census metropolitan areas (CMA), population centre (POPCTR) and rural areas.4 A census metropolitan area (CMA) is an area consisting of one or more adjacent municipalities situated around a major urban core. A CMA must have a total population of at least 100,000 of which 50,000 or more must live in the core. Beginning in 2013/2014, the CMAs are defined by the 2011 Census.5 A population centre (POPCTR) has a population of at least 1,000 and a population density of 400 persons or more per square kilometre, based on population counts from the 2011 Census of Population. Population centres are classified into three groups, depending on the size of their population: small population centres, with a population between 1,000 and 29,999; medium population centres, with a population between 30,000 and 99,999; large urban population centres, with a population of 100,000 or more. The rural area of Canada is the area that remains after the delineation of population centres using 2011 census population data. Included in rural areas are: small towns, villages and other populated places with less than 1,000 population; rural areas of census metropolitan areas and census agglomerations that may contain estate lots, as well as agricultural, undevelopped an non-developable lands; agricultural lands; remote and wilderness areas.6 In the north, the frame for the Canadian Community Health Survey (CCHS) covers 92% of the targeted population in the Yukon, 96% in the Northwest Territories and 92% in Nunavut. In Nunavut, starting in 2013, the coverage was expanded to represent 92% of the targeted population. Before 2013, the coverage was 71% since the survey covered only the 10 largest communities.7 Due to changes in content and methodology, this table now replaces table 13-10-0464-01, which will now only be made available for historical revisions. As a result of the changes, users should use caution when comparing data in this table with the data in 13-10-0464-01.8 As a result of the 2015 redesign, Canadian Community Health Survey (CCHS) has a new collection strategy, a new sample design, and has undergone major content revisions. With all these factors taken together, caution should be taken when comparing data from previous cycles to data released for the 2015 cycle onwards.9 The COVID-19 pandemic had major impacts on the data collection operations for Canadian Community Health Survey (CCHS) 2020. The collection was stopped mid-March, towards the end of the first collection period, and did not resume until September. The second, third and fourth quarterly samples were collected during very short collection periods, each of about five weeks, from September to December. The impossibility of conducting in-person interviews, the shorter collection periods and collection capacity issues resulted in a significant decrease in the response rates. As for previous CCHS cycles, survey weights were adjusted to minimise any potential bias that could arise from survey non-response; non-response adjustments and calibration using available auxiliary information were applied and are reflected in the survey weights provided with the data file. Extensive validations of survey estimates were also performed and examined from a bias analysis perspective. Despite these rigorous adjustments and validations, the high non-response increases the risk of a remaining bias and the magnitude with which such a bias could impact estimates produced using the survey data. Therefore, users are advised to use the CCHS 2020 data with caution, especially when creating estimates for small sub-populations or when comparing to other CCHS years.10 The content on material experiences was collected in New Brunswick, British Columbia and Nunavut for 2019/2020. This indicator is not available for the provinces or territories or Canada level for the 2019/2020 period.11 The confidence interval illustrates the degree of variability associated with a rate. Wide confidence intervals indicate high variability, thus, these rates should be interpreted with due caution. When comparing estimates, it is important to use confidence intervals to determine if differences between values are statistically significant.12 Bootstrapping techniques were used to produce the 95% confidence intervals (CIs).13 Data with a coefficient of variation (CV) from 15.1% to 35.0% are identified as follows: (E) use with caution.14 Data with a coefficient of variation (CV) greater than 35.0% or that did not meet the minimum sample size requirement were suppressed and are identified as follows: (F) too unreliable to be published.15 The following standard symbols are used in this Statistics Canada table: (..) for figures not available for a specific reference period and (...) for figures not applicable.16 Percentages are rounded to the nearest tenth. Numbers are rounded to the nearest hundred.17 Census population counts have been used to produce the population projection counts. These counts are used to ensure that the Canadian Community Health Survey (CCHS) weights and resulting estimates included in this table are consistent with known population totals.18 Population aged 12 and over who reported perceiving their own health status as being either excellent or very good or fair or poor, depending on the indicator. Perceived health refers to the perception of a person's health in general, either by the person himself or herself, or, in the case of proxy response, by the person responding. Health means not only the absence of disease or injury but also physical, mental and social well-being.19 Population aged 12 and over who reported perceiving their own mental health status as being excellent or very good or fair or poor, depending on the indicator. Perceived mental health refers to the perception of a person's mental health in general. Perceived mental health provides a general indication of the population suffering from some form of mental disorder, mental or emotional problems, or distress, not necessarily reflected in perceived health.20 Population aged 12 and over who reported perceiving that most days in their life were quite a bit or extremely stressful. Perceived life stress refers to the amount of stress in the person's life, on most days, as perceived by the person or, in the case of proxy response, by the person responding.21 Body mass index (BMI) is a method of classifying body weight according to health risk. According to the World Health Organization (WHO) and Health Canada guidelines, health risk levels are associated with each of the following BMI categories: normal weight = least health risk; underweight and overweight = increased health risk; obese, class I = high health risk; obese, class II = very high health risk; obese, class III = extremely high health risk.22 Body mass index (BMI) is calculated by dividing the respondent's body weight (in kilograms) by their height (in metres) squared.23 Body mass index (BMI) is calculated for the population aged 12 and over, excluding pregnant females and persons less than 3 feet (0.914 metres) tall or greater than 6 feet 11 inches (2.108 metres).24 According to the World Health Organization (WHO) and Health Canada guidelines, the index for body weight classification for the population aged 18 and older is: less than 18.50 (underweight); 18.50 to 24.99 (normal weight); 25.00 to 29.99 (overweight); 30.00 to 34.99 (obese, class I); 35.00 to 39.99 (obese, class II); 40.00 or greater (obese, class III). The population aged 12 to 17 is classified as severely obese"25 A systematic review of the literature concluded that the use of self-reported data among adults underestimates weight and overestimates height, resulting in lower estimates of obesity than those obtained from measured data. Using data from the 2005 Canadian Community Health Survey (CCHS) subsample, where both measured and self-reported height and weight were collected, BMI correction equations have been developed. This table presents obesity estimates adjusted using these equations.26 The Canadian Community Health Survey (CCHS) - Annual, the Canadian Health Measures Survey (CHMS) and the 2015 CCHS - Nutrition, all collect height and weight data and derive obesity rates based on Body Mass Index (BMI). Users should take note of the data collection method, the target population and the classification system used by each survey in order to select the appropriate data set.27 Population aged 15 and over who reported that they have been diagnosed by a health professional as having arthritis. Arthritis includes osteoarthritis and rheumatoid arthritis, but excludes fibromyalgia.28 Population aged 12 and over who reported that they have been diagnosed by a health professional as having Type 1 or Type 2 diabetes, including females 15 and over who reported that they have been diagnosed with gestational diabetes.29 Population aged 12 and over who reported that they have been diagnosed by a health professional as having asthma.30 Population aged 35 and over who reported being diagnosed by a health professional with chronic bronchitis, emphysema or chronic obstructive pulmonary disease (COPD).31 The Canadian Health Measures Survey (CHMS) and the Canadian Community Health Survey (CCHS) - Annual both collect data

Symbol legend: .. not available for a specific reference period x suppressed to meet the confidentiality requirements of the Statistics Act A data quality: excellent Footnotes: 1 Ownership type" refers to whether an owner of a residential property is an individual or a non-individual entity such as corporations trusts stated-owned entities or related groups. In the context of residential property assignment of ownership type is as follows: A property is considered owned by an "individual" if all owners of a property are individuals. Conversely properties are deemed owned by "non-individuals" if all owners are non-individuals or if the owners are a combination of individuals and non-individuals." 2 The geographic boundaries used in this table are the 2016 census subdivisions boundaries. 3 A residential property" refers to all land and structures intended for private occupancy whether on a permanent or a temporary basis." 4 The Composite Quality Indicator (CQI) shown in this table is created by combining many individual quality indicators, each one representing the quality of different Canadian Housing Statistics Program (CHSP) data processing steps (for example: coding, geocoding, linkage and imputation) and includes the following values: A - Excellent: All domain variables and the variable of interest are of excellent quality. B - Very good: All domain variables and the variable of interest are of very good to excellent quality. C - Good: Geography quality is considered good while all other domains variables and the variable of interest are of very good to excellent quality. D - Acceptable: Geography and period of construction variables are of acceptable quality while all other domains variables and the variable of interest are of good to excellent quality. E - Use with caution: Several of domain variables or the variable of interest are of poor quality. F - Too unreliable to be published. The CQIs are available starting with the reference period of 2020, except for the Northwest Territories where they are available from 2019 reference period. 5 Property use estimates are not available outside census metropolitan areas (CMAs) and census agglomerations (CAs). 6 New Brunswick estimates are not available for the reference period of 2018. 7 Assessment value and assessment value per square foot estimates for the most recent period of construction (2016 to reference period) are suppressed for Ontario due to the availability of these data. 8 For the reference periods 2018 and 2019, total living area and assessment value per square foot estimates are not available for British Columbia. 9 Nova Scotia estimates for the 2019 reference period have been revised. 10 Property type" refers to property characteristics and/or dwelling configuration on which there can be one or more residential structures. Property types include: single-detached houses semi-detached houses condominium apartments mobile homes other property types properties with multiple residential units and vacant land." 11 Estimates by property type in Newfoundland and Labrador are only available in the census subdivision of St. John’s. 12 Estimates by property type in Northwest Territories are not available. 13 Estimates by property type in Nunavut are not available. 14 Period of construction" refers to the period in time during which the building or dwelling was originally constructed. This refers to the period in which the building was completed not the time of any later remodelling additions or conversions. For properties having multiple residential structures this refers to the period in which the most recent structure was completed." 15 For the most recent period of construction (2016 to reference period), the property use indicator is less precise. As a consequence, these estimates should be used with caution. 16 Estimates by period of construction in Northwest Territories are not available. 17 Estimates by period of construction in Nunavut are not available. 18 Property use" refers to the use of a residential property by its owners. The property can be occupied by the owner at least one of the owners or none of the owners on the property title. A property is classified as owner-occupied when at least one owner on the property title declares the property as their usual residence according to tax data or other administrative data. A property is classified as not owner-occupied when none of the owners on the property title declare the property as their usual residence." 19 Estimates by property use in Yukon are only available in the census subdivision of Whitehorse. 20 Estimates by property use in Nunavut are not available. 21 Newfoundland and Labrador estimates are not available at the provincial level and for the category “Outside of census metropolitan areas (CMAs) and census agglomerations (CAs)”. 22 Northwest Territories estimates are available only for the 2019 reference period. 23 Northwest Territories estimates are only available in the census agglomeration of Yellowknife. 24 Northwest Territories total living area and assessment value per square foot estimates are not available. 25 Nunavut total living area and assessment value per square foot estimates are not available. 26 A condominium apartment" refers to a set of living quarters that is owned individually while land and common elements are held in joint ownership with others." 27 All counts undergo random rounding, a process that transforms all raw counts into randomly rounded counts. This reduces the possibility of identifying individuals in the tabulations. Subtotals and totals may not exactly equal the sum of component parts due to system rounding. 28 Assessment value" refers to the assessed value of the property for the purposes of determining property taxes. It is important to note that the assessed value does not necessarily represent the market value. Given that different provinces and territories have their own assessment periods and durations of the valuation roll it is difficult to make accurate comparisons of similar properties from one province or territory to another. For properties that are being utilized for both residential and non-residential purposes only the residential portion's value has been taken into account. The reference years of the assessment values by province or territory are available here: Canadian Housing Statistics Program (CHSP)." 29 Averages and medians are calculated using properties with non-missing or non-zero values when there is no imputation available for the variables of interest (for example assessment value, total living area, and assessment value per square foot). 30 Total living area" refers to the residential living space within a structure. For residential structures that have a basement the finished basement area is included in the total living area while unfinished basement area is not included."

Intimate partner and non-intimate partner victims of police-reported violent crime and traffic offences causing bodily harm or death, by age and gender of victim c (1, 2)Frequency: AnnualTable: 35-10-0202-01Release date: 2023-11-21Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area partTable Corrections: Date Note On December 10, 2021, the 2019 and 2020 data were revised as a result of corrections made to the populations used to calculate rates per 100 000 population. Footnotes: 1 In general, for police-reported incidents that involve violations against the person, a victim record is collected for each victim involved in the incident. If an individual is a victim in multiple incidents in the same reference year, that individual will be counted as one victim for each incident. Some victims experience violence over a period of time, sometimes years, all of which may be considered by the police to be part of one continuous incident and are counted as a single victim. Victim records are not required for all violent violations, but are accepted, for some violent offences such as uttering threats and criminal harassment. 2 Data are from the Uniform Crime Reporting (UCR2) Trend Database, which contains historical data that permit the analysis of trends since 2009 in the characteristics of incidents, and accused and victim characteristics, such as age, gender and accused–victim relationship. This database includes respondents accounting for 99% of the population of Canada. 3 A census metropolitan area (CMA) consists of one or more neighbouring municipalities situated around a major urban core. A CMA must have a total population of at least 100,000, of which 50,000 or more live in the urban core. To be included in the CMA, other adjacent municipalities must have a high degree of integration with the central urban core, as measured by commuting flows derived from census data. A CMA typically comprises more than one police service. CMA populations have been adjusted to follow policing boundaries. The Oshawa CMA is excluded from this analysis owing to the incongruity between the police service jurisdictional boundaries and the CMA boundaries. Belleville and Lethbridge became CMAs as of the 2016 Census. In 2022, coverage for each CMA was virtually 100%, except in Toronto (90%) and Hamilton (75%). As a result, counts and rates may differ from information from other sources. 4 Victim age is calculated based on the end date of an incident, as reported by the police. Some victims experience violence over a period of time, sometimes years, all of which may be considered by the police to be part of one continuous incident. 5 Excludes the portion of Halton Regional Police Service that polices the Hamilton census metropolitan area. As a result, counts and rates may differ from information from other sources. 6 The category “age of victim unknown” includes victims whose ages were reported as 80 years and older, but were identified as possible instances of miscoding, as well as victims in Quebec whose ages were unknown but were miscoded as 0. 7 Rates are calculated on the basis of 100,000 population in each age and gender group unless otherwise noted for specific relationships. Populations based on July 1 estimates from Statistics Canada, Centre for Demography. Rates for victims with unknown age or unknown gender are not available for any reference period, as population estimates cannot be applied to calculate rates where these elements are unknown. 9 The option for police to code victims as non-binary in the Uniform Crime Reporting (UCR) Survey was implemented in 2018. Given that small counts of victims identified as “non-binary” may exist, the UCR aggregate data available to the public have been recoded to assign these counts to either “male” or “female,” in order to ensure the protection of confidentiality and privacy. Victims identified as non-binary have been assigned to either male or female based on the regional distribution of victims’ gender. 8 Includes victims aged 15 years and older who were victimized by current and former legally married spouses and common-law partners. Also includes victims aged 12 years and older of current and former boyfriends and girlfriends and other intimate relationships (i.e., those with whom they had a sexual relationship but for which none of the other relationship categories apply). Spousal violence victims under the age of 15 years are included in the relationship category “other family.” Victims of non-spousal intimate partner violence under the age of 12 years are included in the relationship category “unknown relationship.” Rates for total victims are based on populations aged 12 years and older. Rates for other victim age groups are calculated on the basis of their corresponding age group populations.