Use the app to find the downloadable area within Jackson County - 2 Foot Contour MapThe 2-foot Contour Map shows contours that were derived from several different LiDAR projects in the Rogue Valley over the last 10 years. The map can be used to both download and view the contour data. To use the map, search or zoom in to an address. When zoomed in to a specific scale, the map will change from the downloadable areas layer to 2-foot interval contour lines. The LiDAR Project Dates layer can be used to identify the date when the elevation was collected in an area. Please note that data is available only for the valley floor areas at this time.The 2ft contours were created from 1-meter pixel DEM and then cleaned to remove very small elevation changes and to create a smooth contour line. This information should not be used to create topographic surveys or other applications where the precise elevation of a location is required. For additional information on LiDAR in Oregon or to download the source data, please visit the DOGAMI Lidar Viewer.The downloadable data is a zipped ESRI Shapefile and is projected to Oregon State Plane South (Intl Feet) with NAD 1983 datum.

This dataset contains points representing Bald Eagle Nest locations. This data exists as an aid in the protection of habitat zones around known Bald Eagle’s Nests in St. Johns County as required by Section 4.01.10 of the Land Development Code. The intent of Section 4.01.10 of the County Land Development Code is to maintain and/or improve the environmental conditions that are required for the survival and well-being of the Bald Eagle (Haliaeetus leucocephalus) in St. Johns County by minimizing potential detrimental impacts on Bald Eagles particularly during the nesting season defined as October 1 to May 15. This section provides Management Zones with prohibitions and standards for the protection of the Bald Eagle in St. Johns County. Limitations of activities that are allowed in the Management Zones around Bald Eagle nest trees are to minimize the adverse effects on Bald Eagles. Primary Zone: This is the most critical area and must be maintained to promote acceptable conditions for Bald Eagles. The Primary Zone shall be an undisturbed area extending in a minimum radius seven hundred fifty (750) feet outward from the nest tree. Secondary Zone: Restrictions in this zone are needed to minimize disturbance that might compromise the integrity of the Primary Zone and to protect important areas outside the Primary Zone. The Secondary Zone shall be an area extending outward from the boundary of the Primary Zone a minimum distance of seven hundred fifty (750) feet. Both the Primary and Secondary Zones are displayed from each Nest Point. This data is managed as an element in reviews of proposed development project applications received by the County to determine appropriate development options and constraints.

The Digital Surficial Geologic-GIS Map of the Eagle Peak 15' Quadrangle, Wyoming is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (eape_surficial_geology.gdb), and a 2.) Open Geospatial Consortium (OGC) geopackage. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (eape_surficial_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (eape_surficial_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) this file (yell_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (yell_surficial_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (eape_surficial_geology_metadata_faq.pdf). Please read the yell_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. QGIS software is available for free at: https://www.qgis.org/en/site/. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (eape_surficial_geology_metadata.txt or eape_surficial_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:62,500 and United States National Map Accuracy Standards features are within (horizontally) 31.8 meters or 104.2 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

Geospatial data about Eagle County, Colorado Parcels. Export to CAD, GIS, PDF, CSV and access via API.

Areas identified as the most suitable habitat for nesting Golden Eagles in the Lake Tahoe Basin.

These data provide an accurate high-resolution shoreline compiled from imagery of EAGLE HARBOR, MI . This vector shoreline data is based on an office interpretation of imagery that may be suitable as a geographic information system (GIS) data layer. This metadata describes information for both the line and point shapefiles. The NGS attribution scheme 'Coastal Cartographic Object Attribute Sou...

description: The Digital Geologic Map of part of the Eagle Peak 15' Quadrangle, Wyoming is composed of GIS data layers, two ancillary GIS tables, a Windows Help File with ancillary map text, figures and tables, GIS data layer and table FGDC metadata and ArcMap 9.1 layer (.LYR) files. The data were completed as a component of the Geologic Resources Evaluation (GRE) program, a National Park Service (NPS) Inventory and Monitoring (I&M) funded program that is administered by the NPS Geologic Resources Division (GRD). All GIS and ancillary tables were produced as per the NPS GRE Geology-GIS Geodatabase Data Model v. 1.4. (available at: http://science.nature.nps.gov/im/inventory/geology/GeologyGISDataModel.cfm). The GIS data is available as a 9.1 personal geodatabase (eapk_geology.mdb), as coverage and table export (.E00) files, and as a shapefile (.SHP) and DBASEIV (.DBF) table files. The GIS data projection is NAD83, UTM Zone 12N. That data is within the area of interest of Yellowstone National Park.; abstract: The Digital Geologic Map of part of the Eagle Peak 15' Quadrangle, Wyoming is composed of GIS data layers, two ancillary GIS tables, a Windows Help File with ancillary map text, figures and tables, GIS data layer and table FGDC metadata and ArcMap 9.1 layer (.LYR) files. The data were completed as a component of the Geologic Resources Evaluation (GRE) program, a National Park Service (NPS) Inventory and Monitoring (I&M) funded program that is administered by the NPS Geologic Resources Division (GRD). All GIS and ancillary tables were produced as per the NPS GRE Geology-GIS Geodatabase Data Model v. 1.4. (available at: http://science.nature.nps.gov/im/inventory/geology/GeologyGISDataModel.cfm). The GIS data is available as a 9.1 personal geodatabase (eapk_geology.mdb), as coverage and table export (.E00) files, and as a shapefile (.SHP) and DBASEIV (.DBF) table files. The GIS data projection is NAD83, UTM Zone 12N. That data is within the area of interest of Yellowstone National Park.

At NASA they use Geographic Information systems to provide:maps and powerful capabilities to visualise, analyse and interact with big dataFind out more about how they do this in this ArcGIS StoryMap created by NASA in 2020. This StoryMap includes a section on where you can find NASA data.

This resource is a member of a series. The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. The All Roads Shapefile includes all features within the MTDB Super Class "Road/Path Features" distinguished where the MAF/TIGER Feature Classification Code (MTFCC) for the feature in MTDB that begins with "S". This includes all primary, secondary, local neighborhood, and rural roads, city streets, vehicular trails (4wd), ramps, service drives, alleys, parking lot roads, private roads for service vehicles (logging, oil fields, ranches, etc.), bike paths or trails, bridle/horse paths, walkways/pedestrian trails, and stairways.

Topicality: 01-01-2025Projection: New Zealand Transverse Mercator (NZTM)This layer contains the archive of the meshblock boundaries maintained by Stats NZ as defined by Stats NZ. Stats NZ maintains an annual meshblock pattern for collecting and producing statistical data. This allows data to be compared over time. A meshblock is the smallest geographic unit for which statistical data is collected and processed by Stats NZ. A meshblock is defined by a geographic area, which can vary in size from part of a city block to a large area of rural land.This layer get updated yearly with the latest boundary data. You can use this layer when you need any year of boundary data in your map. By setting a filter on the dataset year you can filter on specific year of the dataset.For information about the fields in this dataset go to the Data tab.The layer is further generalised by Eagle Technology for improved performance on the web, therefore it doesn't fully represent the official boundaries.If you only need the latest boundary data in your map you can use the current version of this dataset. All the current versions of Stats NZ Boundary layers can be found here.The official dataset can be found on https://datafinder.stats.govt.nz.This layer is offered by Eagle Technology (Official Esri Distributor). Eagle Technology offers services that can be used in the ArcGIS platform. The Content team at Eagle Technology updates the layers on a regular basis and regularly adds new content to the Living Atlas. By using this content and combining it with other data you can create new information products quickly and easily.If you have any questions or comments about the content, please let us now at livingatlas@eagle.co.nz.

Often times that hardest part about writing your own lesson in GIS is finding the appropriate spatial data. This video takes you through some of the sources of spatial data that you have in New Zealand. URLs for the data sources mentioned in the video are:Living Atlas of The Worldhttps://livingatlas.arcgis.comNZ Government Data Portalhttps://data.govt.nz/ LINZ Data Servicehttps://data.linz.govt.nz/Wellington City Council Open Data Portalhttps://data-wcc.opendata.arcgis.com/Koordinates https://koordinates.com/data/And some addition Open Data Sites for our main NZ CitiesAuckland Council Open Data Portalhttps://data-aucklandcouncil.opendata.arcgis.com/ Canterbury Maps Data Portal https://opendata.canterburymaps.govt.nz/Video Recorded April 2020.

The datasets used in the creation of the predicted Habitat Suitability models includes the CWHR range maps of Californias regularly-occurring vertebrates which were digitized as GIS layers to support the predictions of the CWHR System software. These vector datasets of CWHR range maps are one component of California Wildlife Habitat Relationships (CWHR), a comprehensive information system and predictive model for Californias wildlife. The CWHR System was developed to support habitat conservation and management, land use planning, impact assessment, education, and research involving terrestrial vertebrates in California. CWHR contains information on life history, management status, geographic distribution, and habitat relationships for wildlife species known to occur regularly in California. Range maps represent the maximum, current geographic extent of each species within California. They were originally delineated at a scale of 1:5,000,000 by species-level experts and have gradually been revised at a scale of 1:1,000,000. For more information about CWHR, visit the CWHR webpage (https://www.wildlife.ca.gov/Data/CWHR). The webpage provides links to download CWHR data and user documents such as a look up table of available range maps including species code, species name, and range map revision history; a full set of CWHR GIS data; .pdf files of each range map or species life history accounts; and a User Guide.The models also used the CALFIRE-FRAP compiled "best available" land cover data known as Fveg. This compilation dataset was created as a single data layer, to support the various analyses required for the Forest and Rangeland Assessment, a legislatively mandated function. These data are being updated to support on-going analyses and to prepare for the next FRAP assessment in 2015. An accurate depiction of the spatial distribution of habitat types within California is required for a variety of legislatively-mandated government functions. The California Department of Forestry and Fire Protections CALFIRE Fire and Resource Assessment Program (FRAP), in cooperation with California Department of Fish and Wildlife VegCamp program and extensive use of USDA Forest Service Region 5 Remote Sensing Laboratory (RSL) data, has compiled the "best available" land cover data available for California into a single comprehensive statewide data set. The data span a period from approximately 1990 to 2014. Typically the most current, detailed and consistent data were collected for various regions of the state. Decision rules were developed that controlled which layers were given priority in areas of overlap. Cross-walks were used to compile the various sources into the common classification scheme, the California Wildlife Habitat Relationships (CWHR) system.CWHR range data was used together with the FVEG vegetation maps and CWHR habitat suitability ranks to create Predicted Habitat Suitability maps for species. The Predicted Habitat Suitability maps show the mean habitat suitability score for the species, as defined in CWHR. CWHR defines habitat suitability as NO SUITABILITY (0), LOW (0.33), MEDIUM (0.66), or HIGH (1) for reproduction, cover, and feeding for each species in each habitat stage (habitat type, size, and density combination). The mean is the average of the reproduction, cover, and feeding scores, and can be interpreted as LOW (less than 0.34), MEDIUM (0.34-0.66), and HIGH (greater than 0.66) suitability. Note that habitat suitability ranks were developed based on habitat patch sizes >40 acres in size, and are best interpreted for habitat patches >200 acres in size. The CWHR Predicted Habitat Suitability rasters are named according to the 4 digit alpha-numeric species CWHR ID code. The CWHR Species Lookup Table contains a record for each species including its CWHR ID, scientific name, common name, and range map revision history (available for download at https://www.wildlife.ca.gov/Data/CWHR).

Geospatial data about Eagle Ford Play Boundary. Export to CAD, GIS, PDF, CSV and access via API.

CDFW BIOS GIS Dataset, Contact: Chris Stermer, Description: The database represents 702 point locations and associated stand assessment data collected in aspen stands in the in the Eagle Lake Ranger District, Lassen National Forest. Data were gathered during the summers of 2001-2005. Observations were conducted by trained Forest Service crews. Assessments were conducted in aspen stands in the region, or stands identified during field surveys. This dataset is considered to be a complete inventory of aspen in these watersheds.

The Digital Geologic Map (Surficial Map) of the Eagle Peak Quadrangle, Yellowstone National Park and adjoining area, Wyoming is composed of GIS data layers, two ancillary GIS tables, a Windows Help File with ancillary map text, figures and tables, GIS data layer and table FGDC metadata and ArcMap 9.1 layer (.LYR) files. The data were completed as a component of the Geologic Resources Evaluation (GRE) program, a National Park Service (NPS) Inventory and Monitoring (I&M) funded program that is administered by the NPS Geologic Resources Division (GRD). All GIS and ancillary tables were produced as per the NPS GRE Geology-GIS Geodatabase Data Model v. 1.4. (available at: http://science.nature.nps.gov/im/inventory/geology/GeologyGISDataModel.cfm). The GIS data is available as a 9.1 personal geodatabase (eagp_geology.mdb), as coverage and table export (.E00) files, and as a shapefile (.SHP) and DBASEIV (.DBF) table files. The GIS data projection is NAD83, UTM Zone 12N. That data is within the area of interest of Yellowstone National Park.

Location of Bald Eagle Nests, both active and inactive, in portions of Southeast Alaska, Prince William Sound, Copper River drainage, Kenai Peninsula, Kodiak Island, and the Alaska Peninsula. Most of the data is collected during boat surveys conducted by the US Fish and Wildlife Service. The data set available through this site is limited to Southeast Alaska. For other areas, contact the USFWS. Data are collected for a variety of reasons, but most sites were surveyed primarily to coordinate with proposed timber sale activity. Other sites were surveyed for monitoring purposes (e.g. Seymour Canal, Admiralty Island, Chilkat Peninsula) or during other studies or projects (bald eaglet translocation, land exchanges, contaminant studies, oil spill studies, road projects)

To do more than the very basics of GIS you will need to sign up for a FREE Schools ArcGIS Online subscription. To sign up for a subscription contact gisinschools@eagle.co.nz

Topicality: 01-01-2025Projection: New Zealand Transverse Mercator (NZTM)This layer contains the archive of the Māori Ward boundaries as defined by the regional councils and Local Government Commission but maintained by Stats NZ (the custodian).The Local Electoral Act 2001 provides that Māori wards may be established in territorial authorities. The statutory provisions for establishing Māori wards are set out in sections 19Z to 19ZH of the Local Electoral Act 2001. The first Māori ward was established by representation review in 2019 and appears in the 2021 geographic boundaries released by Stats NZ. The first Māori ward to be created is Wairoa Māori ward (02901) in the Wairoa District. Māori ward boundaries are defined at meshblock level. This layer get updated yearly with the latest boundary data. You can use this layer when you need any year of boundary data in your map. By setting a filter on the dataset year you can filter on specific year of the dataset.For information about the fields in this dataset go to the Data tab.The layer is further generalised by Eagle Technology for improved performance on the web, therefore it doesn't fully represent the official boundaries.If you only need the latest boundary data in your map you can use the current version of this dataset. All the current versions of Stats NZ Boundary layers can be found here.The official dataset can be found on https://datafinder.stats.govt.nz.This layer is offered by Eagle Technology (Official Esri Distributor). Eagle Technology offers services that can be used in the ArcGIS platform. The Content team at Eagle Technology updates the layers on a regular basis and regularly adds new content to the Living Atlas. By using this content and combining it with other data you can create new information products quickly and easily.If you have any questions or comments about the content, please let us now at livingatlas@eagle.co.nz

Topicality: 01-01-2025Projection: New Zealand Transverse Mercator (NZTM)This layer contains the latest set of the Māori Ward boundaries as defined by the regional councils and Local Government Commission but maintained by Stats NZ (the custodian).The Local Electoral Act 2001 provides that Māori wards may be established in territorial authorities. The statutory provisions for establishing Māori wards are set out in sections 19Z to 19ZH of the Local Electoral Act 2001. The first Māori ward was established by representation review in 2019 and appears in the 2021 geographic boundaries released by Stats NZ. The first Māori ward to be created is Wairoa Māori ward (02901) in the Wairoa District. Māori ward boundaries are defined at meshblock level. This layer get updated yearly with the latest boundary data.A layer with the full archive of the data for all the available years is available here.For information about the fields in this dataset go to the Data tab.The layer is further generalised by Eagle Technology for improved performance on the web, therefore it doesn't fully represent the official boundaries.The official dataset can be found on https://datafinder.stats.govt.nz.This layer is offered by Eagle Technology (Official Esri Distributor). Eagle Technology offers services that can be used in the ArcGIS platform. The Content team at Eagle Technology updates the layers on a regular basis and regularly adds new content to the Living Atlas. By using this content and combining it with other data you can create new information products quickly and easily.If you have any questions or comments about the content, please let us now at livingatlas@eagle.co.nz