Petroleum is the primary source of energy in the United States, with a consumption of 35.35 quadrillion British thermal units in 2024. Closely following, the U.S. had 34.2 quadrillion British thermal units of energy derived from natural gas. Energy consumption by sector in the United States Petroleum is predominantly utilized as a fuel in the transportation sector, which is also the second-largest consumer of energy in the U.S. with almost 30 percent of the country’s total energy consumption in 2024. This figure is topped only by the energy-guzzling industrial sector, a major consumer of fossil fuels such as petroleum and natural gas. Renewable energy in the United States Despite the prevalence of fossil fuels in the U.S. energy mix, the use of renewable energy consumption has grown immensely in the last decades to approximately 11 exajoules in 2023. Most of the renewable energy produced in the U.S. is derived from biomass, hydro and wind sources. In 2024, renewable electricity accounted for approximately 24 percent of the nation’s total electricity generation.

Electricity consumption in the United States totaled ***** terawatt-hours in 2023, one of the highest values in the period under consideration. Figures represent energy end use, which is the sum of retail sales and direct use of electricity by the producing entity. Electricity consumption in the U.S. is expected to continue increasing in the next decades. Which sectors consume the most electricity in the U.S.? Consumption has often been associated with economic growth. Nevertheless, technological improvements in efficiency and new appliance standards have led to a stabilizing of electricity consumption, despite the increased ubiquity of chargeable consumer electronics. Electricity consumption is highest in the residential sector, followed by the commercial sector. Equipment used for space heating and cooling account for some of the largest shares of residential electricity end use. Leading states in electricity use Industrial hub Texas is the leading electricity-consuming U.S. state. In 2022, the Southwestern state, which houses major refinery complexes and is also home to nearly ** million people, consumed over *** terawatt-hours. California and Florida trailed in second and third, each with an annual consumption of approximately *** terawatt-hours.

United States Electricity Consumption data was reported at 10.243 kWh/Day bn in Mar 2025. This records a decrease from the previous number of 11.765 kWh/Day bn for Feb 2025. United States Electricity Consumption data is updated monthly, averaging 9.940 kWh/Day bn from Jan 1991 (Median) to Mar 2025, with 411 observations. The data reached an all-time high of 13.179 kWh/Day bn in Jul 2024 and a record low of 7.190 kWh/Day bn in Apr 1991. United States Electricity Consumption data remains active status in CEIC and is reported by U.S. Energy Information Administration. The data is categorized under Global Database’s United States – Table US.RB004: Electricity Supply and Consumption. [COVID-19-IMPACT]

State-level data on all energy sources. Data on production, consumption, reserves, stocks, prices, imports, and exports. Data are collated from state-specific data reported elsewhere on the EIA website and are the most recent values available. Data on U.S. territories also available.

United States Energy Consumption: Industrial: Primary data was reported at 1,840.822 BTU tn in Apr 2018. This records a decrease from the previous number of 1,995.774 BTU tn for Mar 2018. United States Energy Consumption: Industrial: Primary data is updated monthly, averaging 1,799.537 BTU tn from Jan 1973 (Median) to Apr 2018, with 544 observations. The data reached an all-time high of 2,274.070 BTU tn in Nov 1973 and a record low of 1,465.155 BTU tn in May 1982. United States Energy Consumption: Industrial: Primary data remains active status in CEIC and is reported by Energy Information Administration. The data is categorized under Global Database’s USA – Table US.RB002: Energy Consumption.

Monthly data since January 1973 and annual data since 1949 on U.S. primary and total energy consumption by end-use sector (residential, commercial, industrial, transportation) and electric power sector.

In 2022, consumption of primary energy per capita in the United Stated amounted to 284 million British thermal units. Per capita consumption of energy has increased since the 1950s in the United States. However, in the advent of vehicle and electricity efficiency standards, per capita consumption has decreased in recent years.

United States US: Fossil Fuel Energy Consumption: % of Total data was reported at 82.776 % in 2015. This records a decrease from the previous number of 82.935 % for 2014. United States US: Fossil Fuel Energy Consumption: % of Total data is updated yearly, averaging 87.236 % from Dec 1960 (Median) to 2015, with 56 observations. The data reached an all-time high of 95.982 % in 1967 and a record low of 82.776 % in 2015. United States US: Fossil Fuel Energy Consumption: % of Total data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s United States – Table US.World Bank.WDI: Energy Production and Consumption. Fossil fuel comprises coal, oil, petroleum, and natural gas products.; ; IEA Statistics © OECD/IEA 2014 (http://www.iea.org/stats/index.asp), subject to https://www.iea.org/t&c/termsandconditions/; Weighted average; Restricted use: Please contact the International Energy Agency for third-party use of these data.

Energy Consumption: Industrial: Primary: FF: Natural Gas excl Supple data was reported at 863.841 BTU tn in Apr 2018. This records a decrease from the previous number of 909.492 BTU tn for Mar 2018. Energy Consumption: Industrial: Primary: FF: Natural Gas excl Supple data is updated monthly, averaging 720.198 BTU tn from Jan 1973 (Median) to Apr 2018, with 544 observations. The data reached an all-time high of 1,023.256 BTU tn in Dec 1973 and a record low of 383.434 BTU tn in Feb 1977. Energy Consumption: Industrial: Primary: FF: Natural Gas excl Supple data remains active status in CEIC and is reported by Energy Information Administration. The data is categorized under Global Database’s USA – Table US.RB002: Energy Consumption.

United States Total Energy Consumption data was reported at 93.691 BTU qn in 2023. This records a decrease from the previous number of 94.812 BTU qn for 2022. United States Total Energy Consumption data is updated yearly, averaging 92.977 BTU qn from Dec 1980 (Median) to 2023, with 44 observations. The data reached an all-time high of 98.965 BTU qn in 2007 and a record low of 70.489 BTU qn in 1983. United States Total Energy Consumption data remains active status in CEIC and is reported by U.S. Energy Information Administration. The data is categorized under Global Database’s United States – Table US.EIA.IES: Energy Production and Consumption: Annual.

Energy Consumption of United States Over Time

Building Energy Data Book

By Department of Energy [source]

About this dataset

The Building Energy Data Book (2011) is an invaluable resource for gaining insight into the current state of energy consumption in the buildings sector. This dataset provides comprehensive data on residential, commercial and industrial building energy consumption, construction techniques, building technologies and characteristics. With this resource, you can get an in-depth understanding of how energy is used in various types of buildings - from single family homes to large office complexes - as well as its impact on the environment. The BTO within the U.S Department of Energy's Office of Energy Efficiency and Renewable Energy developed this dataset to provide a wealth of knowledge for researchers, policy makers, engineers and even everyday observers who are interested in learning more about our built environment and its energy usage patterns

More Datasets

For more datasets, click here.

Featured Notebooks

• 🚨 Your notebook can be here! 🚨!

How to use the dataset

This dataset provides comprehensive information regarding energy consumption in the buildings sector of the United States. It contains a number of key variables which can be used to analyze and explore the relations between energy consumption and building characteristics, technologies, and construction. The data is provided in both CSV format as well as tabular format which can make it helpful for those who prefer to use programs like Excel or other statistical modeling software.

In order to get started with this dataset we've developed a guide outlining how to effectively use it for your research or project needs.

• Understand what's included: Before you start analyzing the data, you should read through the provided documentation so that you fully understand what is included in the datasets. You'll want to be aware of any potential limitations or requirements associated with each type of data point so that your results are valid and reliable when drawing conclusions from them.

• Clean up any outliers: You may need to take some time upfront investigating suspicious outliers within your dataset before using it in any further analyses — otherwise, they can skew results down the road if not dealt with first-hand! Furthermore, they could also make complex statistical modeling more difficult as well since they artificially inflate values depending on their magnitude within each example data point (i.e., one outlier could affect an entire model’s prior distributions). Missing values should also be accounted for too since these may not always appear obvious at first glance when reviewing a table or graphical representation - but accurate statistics must still be obtained either way no matter how messy things seem!

• Exploratory data analysis: After cleaning up your dataset you'll want to do some basic exploring by visualizing different types of summaries like boxplots, histograms and scatter plots etc.. This will give you an initial case into what trends might exist within certain demographic/geographic/etc.. regions & variables which can then help inform future predictive models when needed! Additionally this step will highlight any clear discontinuous changes over time due over-generalization (if applicable), making sure predictors themselves don’t become part noise instead contributing meaningful signals towards overall effect predictions accuracy etc…

• Analyze key metrics & observations: Once exploratory analyses have been carried out on rawsamples post-processing steps are next such as analyzing metrics such ascorrelations amongst explanatory functions; performing significance testing regression models; imputing missing/outlier values and much more depending upon specific project needs at hand… Additionally – interpretation efforts based

Research Ideas

• Creating an energy efficiency rating system for buildings - Using the dataset, an organization can develop a metric to rate the energy efficiency of commercial and residential buildings in a standardized way.
• Developing targeted campaigns to raise awareness about energy conservation - Analyzing data from this dataset can help organizations identify areas of high energy consumption and create targeted campaigns and incentives to encourage people to conserve energy in those areas.
• Estimating costs associated with upgrading building technologies - By evaluating various trends in building technologies and their associated costs, decision-makers can determine the most cost-effective option when it comes time to upgrade their structures' energy efficiency...

Forecast: Solar Energy Consumption in the US 2022 - 2026 Discover more data with ReportLinker!

Primary energy consumption in the United States has oscillated since 1998, peaking at 97.4 exajoules in 2007. By 2023, figures had decreased to nearly 94.3 exajoules. Primary energy refers to energy harvested directly from natural resources, before being transformed into electricity or other secondary or tertiary energy forms. It includes both fossil fuels and renewable sources. United States' primary energy demand: global context The U.S. is the second largest primary energy consumer worldwide, only falling behind China. In 2021, China had a primary energy demand of over 157 exajoules. Rounding out the top three, India ranked third and had a total energy consumption of some 35 exajoules, or roughly 38 percent of the U.S.’s consumption. Energy transition in the U.S. Such high energy demand leads to greater carbon emissions. Consequently, 71 percent of U.S. citizens are in favor of speeding up the transition to clean energy sources, such as wind and solar power. Despite the increase in clean energy investments in the U.S., the country’s main energy sources are still fossil fuels. However, the share of renewables in electricity generation has increased to almost 21 percent as of 2021.

United States Energy Consumption: Fossil Fuels data was reported at 7,001.586 BTU tn in Aug 2018. This records an increase from the previous number of 6,913.155 BTU tn for Jul 2018. United States Energy Consumption: Fossil Fuels data is updated monthly, averaging 6,340.282 BTU tn from Jan 1973 (Median) to Aug 2018, with 548 observations. The data reached an all-time high of 8,102.790 BTU tn in Jan 2004 and a record low of 4,788.247 BTU tn in Jun 1982. United States Energy Consumption: Fossil Fuels data remains active status in CEIC and is reported by Energy Information Administration. The data is categorized under Global Database’s United States – Table US.RB002: Energy Consumption.

The City and County Energy Profiles lookup table provides modeled electricity and natural gas consumption and expenditures, on-road vehicle fuel consumption, vehicle miles traveled, and associated emissions for each U.S. city and county. Please note this data is modeled and more precise data may be available from regional, state, or other sources. The modeling approach for electricity and natural gas is described in Sector-Specific Methodologies for Subnational Energy Modeling: https://www.nrel.gov/docs/fy19osti/72748.pdf. This data is part of a suite of state and local energy profile data available at the "State and Local Energy Profile Data Suite" link below and complements the wealth of data, maps, and charts on the State and Local Planning for Energy (SLOPE) platform, available at the "Explore State and Local Energy Data on SLOPE" link below. Examples of how to use the data to inform energy planning can be found at the "Example Uses" link below.

United States US: Energy Use: Kg of Oil Equivalent per Capita data was reported at 6,797.621 kg in 2015. This records a decrease from the previous number of 6,955.524 kg for 2014. United States US: Energy Use: Kg of Oil Equivalent per Capita data is updated yearly, averaging 7,651.901 kg from Dec 1960 (Median) to 2015, with 56 observations. The data reached an all-time high of 8,438.403 kg in 1978 and a record low of 5,612.080 kg in 1961. United States US: Energy Use: Kg of Oil Equivalent per Capita data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s USA – Table US.World Bank: Energy Production and Consumption. Energy use refers to use of primary energy before transformation to other end-use fuels, which is equal to indigenous production plus imports and stock changes, minus exports and fuels supplied to ships and aircraft engaged in international transport.; ; IEA Statistics © OECD/IEA 2014 (http://www.iea.org/stats/index.asp), subject to https://www.iea.org/t&c/termsandconditions/; Weighted average; Restricted use: Please contact the International Energy Agency for third-party use of these data.

Abstract

The U.S. Residential Energy Consumption Survey, administered by the U.S. Energy Information Administration (EIA), uses a nationally representative sample to collect information about home characteristics, household energy usage, and energy cost. The microdata at the household level from 2020, 2015, 2009, 2005, 2001, 1997, 1993,1990, and 1987, made available by the EIA for public use, were curated by Carnegie Mellon University Libraries to make it more accessible for data analysis.

Methodology

Survey background and technical information

Usage

• Microdata are organized by year and can be found in "Tables;"
• Years include 2020, 2015, 2009, 2005, 2001, 1997, 1993, 1990, and 1987;
• In "Files," there are 9 folders (named by year), each of which contains the codebook(s) for a given year; for a given year, the codebook is provided in one file for all variables, if the EIA made this available; for some years, the EIA uses multiple files to organize its codebook (e.g., 1997);
• For 2020, 2015, and 2009, there is a PDF file (e.g., microdata_guide_xxxx) that describes how to use the provided sample weights to calculate standard errors; for other years, similar instructions can be found via the URL of the microdata description page on the EIA's website, provided in the description field of the microdata table for a given year (e.g., 1993).

%3C!-- --%3E

Forecast: Renewable Energy Consumption in the US 2024 - 2028 Discover more data with ReportLinker!

United States Energy Consumption: Industrial data was reported at 2,598.485 BTU tn in Apr 2018. This records a decrease from the previous number of 2,771.443 BTU tn for Mar 2018. United States Energy Consumption: Industrial data is updated monthly, averaging 2,661.675 BTU tn from Jan 1973 (Median) to Apr 2018, with 544 observations. The data reached an all-time high of 3,076.259 BTU tn in Oct 1996 and a record low of 2,104.502 BTU tn in Apr 1975. United States Energy Consumption: Industrial data remains active status in CEIC and is reported by Energy Information Administration. The data is categorized under Global Database’s USA – Table US.RB002: Energy Consumption.

Forecast: Primary Energy Consumption in the US 2023 - 2027 Discover more data with ReportLinker!