The Access Network Map of England is a national composite dataset of Access layers, showing analysis of extent of Access provision for each Lower Super Output Area (LSOA), as a percentage or area coverage of access in England. The ‘Access Network Map’ was developed by Natural England to inform its work to improve opportunities for people to enjoy the natural environment. This map shows, across England, the relative abundance of accessible land in relation to where people live. Due to issues explained below, the map does not, and cannot, provide a definitive statement of where intervention is necessary. Rather, it should be used to identify areas of interest which require further exploration. Natural England believes that places where people can enjoy the natural environment should be improved and created where they are most wanted. Access Network Maps help support this work by providing means to assess the amount of accessible land available in relation to where people live. They combine all the available good quality data on access provision into a single dataset and relate this to population. This provides a common foundation for regional and national teams to use when targeting resources to improve public access to greenspace, or projects that rely on this resource. The Access Network Maps are compiled from the datasets available to Natural England which contain robust, nationally consistent data on land and routes that are normally available to the public and are free of charge. Datasets contained in the aggregated data:•
Agri-environment scheme permissive access (routes and open access)•
CROW access land (including registered common land and Section 16)•
Country Parks•
Cycleways (Sustrans Routes) including Local/Regional/National and Link Routes•
Doorstep Greens•
Local Nature Reserves•
Millennium Greens•
National Nature Reserves (accessible sites only)•
National Trails•
Public Rights of Way•
Forestry Commission ‘Woods for People’ data•
Village Greens – point data only Due to the quantity and complexity of data used, it is not possible to display clearly on a single map the precise boundary of accessible land for all areas. We therefore selected a unit which would be clearly visible at a variety of scales and calculated the total area (in hectares) of accessible land in each. The units we selected are ‘Lower Super Output Areas’ (LSOAs), which represent where approximately 1,500 people live based on postcode. To calculate the total area of accessible land for each we gave the linear routes a notional width of 3 metres so they could be measured in hectares. We then combined together all the datasets and calculated the total hectares of accessible land in each LSOA. For further information about this data see the following links:Access Network Mapping GuidanceAccess Network Mapping Metadata Full metadata can be viewed on data.gov.uk.

PLEASE NOTE: This data product is not available in Shapefile format or KML at https://naturalengland-defra.opendata.arcgis.com/datasets/Defra::living-england-habitat-map-phase-4/about, as the data exceeds the limits of these formats. Please select an alternative download format.This data product is also available for download in multiple formats via the Defra Data Services Platform at https://environment.data.gov.uk/explore/4aa716ce-f6af-454c-8ba2-833ebc1bde96?download=true.The Living England project, led by Natural England, is a multi-year programme delivering a satellite-derived national habitat layer in support of the Environmental Land Management (ELM) System and the Natural Capital and Ecosystem Assessment (NCEA) Pilot. The project uses a machine learning approach to image classification, developed under the Defra Living Maps project (SD1705 – Kilcoyne et al., 2017). The method first clusters homogeneous areas of habitat into segments, then assigns each segment to a defined list of habitat classes using Random Forest (a machine learning algorithm). The habitat probability map displays modelled likely broad habitat classifications, trained on field surveys and earth observation data from 2021 as well as historic data layers. This map is an output from Phase IV of the Living England project, with future work in Phase V (2022-23) intending to standardise the methodology and Phase VI (2023-24) to implement the agreed standardised methods.The Living England habitat probability map will provide high-accuracy, spatially consistent data for a range of Defra policy delivery needs (e.g. 25YEP indicators and Environment Bill target reporting Natural capital accounting, Nature Strategy, ELM) as well as external users. As a probability map, it allows the extrapolation of data to areas that we do not have data. These data will also support better local and national decision making, policy development and evaluation, especially in areas where other forms of evidence are unavailable. Process Description: A number of data layers are used to inform the model to provide a habitat probability map of England. The main sources layers are Sentinel-2 and Sentinel-1 satellite data from the ESA Copericus programme. Additional datasets were incorporated into the model (as detailed below) to aid the segmentation and classification of specific habitat classes. Datasets used:Agri-Environment Higher Level Stewardship (HLS) Monitoring, British Geological Survey Bedrock Mapping 1:50k, Coastal Dune Geomatics Mapping Ground Truthing, Crop Map of England (RPA), Dark Peak Bog State Survey, Desktop Validation and Manual Points, EA Integrated Height Model 10m, EA Saltmarsh Zonation and Extent, Field Unit NEFU, Living England Collector App NEFU/EES, Long Term Monitoring Network (LTMN), Lowland Heathland Survey, National Forest Inventory (NFI), National Grassland Survey, National Plant Monitoring Scheme, NEFU Surveys, Northumberland Border Mires, OS Vector Map District , Priority Habitats Inventory (PHI) B Button, European Space Agency (ESA) Sentinel-1 and Sentinel-2 , Space2 Eye Lens: Ainsdale NNR, Space2 Eye Lens: State of the Bog Bowland Survey, Space2 Eye Lens: State of the Bog Dark Peak Condition Survey, Space2 Eye Lens: State of the Bog (MMU) Mountain Hare Habitat Survey Dark Peak, Uplands Inventory, West Pennines Designation NVC Survey, Wetland Inventories, WorldClim - Global Climate DataFull metadata can be viewed on data.gov.uk.

A PDF map that shows the local authority districts, counties and unitary authorities in the United Kingdom as at April 2023. The map has been created to show the United Kingdom from country level down to local authority district level. (File Size - 1,909 KB)

How would you define the boundaries of a town or city in England and Wales in 2016?

Maybe your definition would be based on its population size, geographic extent or where the industry and services are located. This was a question the ONS had to consider when creating a new statistical geography called Towns and Cities.

In reality, the ability to delimit the boundaries of a city or town is difficult!

Major Towns and Cities

The new statistical geography, Towns and Cities has been created based on population size and the extent of the built environment. It contains 112 towns and cities in England and Wales, where the residential and/or workday population > 75,000 people at the 2011 Census. It has been constructed using the existing Built-Up Area boundary set produced by Ordnance Survey in 2011.

This swipe map shows where the towns and cities and built-up areas are different. Just swipe the bar from left to right.

The blue polygons are the towns and cities and the purple polygons are the built-up areas.

A PDF map that shows the health areas in England and Wales as at April 2013. The map shows the health geographies (clinical commissioning group, NHS area teams, and NHS commissioning regions) that became operative in England as at April 2013 and the local health boards in Wales. (File Size - 4 MB)

The Living England project, led by Natural England, is a multi-year programme delivering a satellite-derived national habitat layer in support of the Environmental Land Management (ELM) System and the Natural Capital and Ecosystem Assessment (NCEA) Pilot. The project uses a machine learning approach to image classification, developed under the Defra Living Maps project (SD1705 – Kilcoyne et al., 2017). The method first clusters homogeneous areas of habitat into segments, then assigns each segment to a defined list of habitat classes using Random Forest (a machine learning algorithm). The habitat probability map displays modelled likely broad habitat classifications, trained on field surveys and earth observation data from 2021 as well as historic data layers. This map is an output from Phase IV of the Living England project, with future work in Phase V (2022-23) intending to standardise the methodology and Phase VI (2023-24) to implement the agreed standardised methods.

The Living England habitat probability map will provide high-accuracy, spatially consistent data for a range of Defra policy delivery needs (e.g. 25YEP indicators and Environment Bill target reporting Natural capital accounting, Nature Strategy, ELM) as well as external users. As a probability map, it allows the extrapolation of data to areas that we do not have data. These data will also support better local and national decision making, policy development and evaluation, especially in areas where other forms of evidence are unavailable.

Process Description: A number of data layers are used to inform the model to provide a habitat probability map of England. The main sources layers are Sentinel-2 and Sentinel-1 satellite data from the ESA Copericus programme. Additional datasets were incorporated into the model (as detailed below) to aid the segmentation and classification of specific habitat classes.

Datasets used: Agri-Environment Higher Level Stewardship (HLS) Monitoring, British Geological Survey Bedrock Mapping 1:50k, Coastal Dune Geomatics Mapping Ground Truthing, Crop Map of England (RPA), Dark Peak Bog State Survey, Desktop Validation and Manual Points, EA Integrated Height Model 10m, EA Saltmarsh Zonation and Extent, Field Unit NEFU, Living England Collector App NEFU/EES, Long Term Monitoring Network (LTMN), Lowland Heathland Survey, National Forest Inventory (NFI), National Grassland Survey, National Plant Monitoring Scheme, NEFU Surveys, Northumberland Border Mires, OS Vector Map District , Priority Habitats Inventory (PHI) B Button, European Space Agency (ESA) Sentinel-1 and Sentinel-2 , Space2 Eye Lens: Ainsdale NNR, Space2 Eye Lens: State of the Bog Bowland Survey, Space2 Eye Lens: State of the Bog Dark Peak Condition Survey, Space2 Eye Lens: State of the Bog (MMU) Mountain Hare Habitat Survey Dark Peak, Uplands Inventory, West Pennines Designation NVC Survey, Wetland Inventories, WorldClim - Global Climate Data

Using a range of different data sources Natural England has collated a map showing the extent of peatlands in England. For the purposes of this project, peatlands have been classified into three types based on the source of the information but assumed to have the following general characteristics:■ Deep peaty soils: Areas covered with a majority of peat >40cm deep.■ Shallow peaty soils: Areas with a majority of soils with peat 10–40cm deep.■ Soils with peaty pockets: Areas of mostly non-peat soils, supporting smaller pockets of deep peat (such as flushes or exposures of buried peat) too small to map at a national scale.Reported in Natural England's publication England's Peatland - carbon storage and greenhouse gases (NE257).We have have shared this data with permission from Natural England. You can request a download of the full dataset from enquiries@naturalengland.org.uk. It is available free of charge for non-commercial purposes. If you want to use the data for a Commercial purpose you must obtain a licence from Natural England.

A PDF map showing the lower layer super output areas in the East of England Region of England as at December 2011. (File Size - 27 MB)

A PDF map showing the output areas in the East of England Region of England as at December 2011. (File Size - 28 MB)

This layer of the GeoIndex shows the availability of 1:25000 scale Classical Areas Geological Maps. The maps themselves show the occurrence, nature and stratigraphic age of rocks. They are available for selected areas of outstanding geological interest in the United Kingdom, and in a number of versions (Solid, or Solid and Drift combined, Bedrock or Superficial). Maps are normally available in both flat and folded format. 1:25000 scale maps are also available for the Channel Islands. To order maps, take note of the map name and use the BGS Internet Shop.

This dataset provides a 1km resolution raster (gridded) coverage of wooded areas in riparian zones (river- or streamsides) across Great Britain. The areas classified as riparian in this dataset are defined by a 50 metre buffer applied to the CEH 1:50000 watercourse network. Wooded areas within this zone are identified as those classified by the Land Cover Map of Great Britain 2007 as either coniferous or deciduous woodland. The data are aggregated to a 1km resolution.

This dataset contains gridded human population with a spatial resolution of 1 km x 1 km for the UK based on Census 2021 (Census 2022 for Scotland) and Land Cover Map 2021 input data. Data on population distribution for the United Kingdom is available from statistical offices in England, Wales, Northern Ireland and Scotland and provided to the public e.g. via the Office for National Statistics (ONS). Population data is typically provided in tabular form or, based on a range of different geographical units, in file types for geographical information systems (GIS), for instance as ESRI Shapefiles. The geographical units reflect administrative boundaries at different levels of detail, from Devolved Administration to Output Areas (OA), wards or intermediate geographies. While the presentation of data on the level of these geographical units is useful for statistical purposes, accounting for spatial variability for instance of environmental determinants of public health requires a more spatially homogeneous population distribution. For this purpose, the dataset presented here combines 2021/2022 UK Census population data on Output Area level with Land Cover Map 2021 land-use classes 'urban' and 'suburban' to create a consistent and comprehensive gridded population data product at 1 km x 1 km spatial resolution. The mapping product is based on British National Grid (OSGB36 datum).

These are digital boundaries for the system of districts essentially created by the 1894 Local Government Act and continuing to exist until 1974. England and Wales were divided into County Boroughs, Municipal Boroughs, Urban Districts and Rural Districts. These generally functioned as sub-divisions of Administrative Counties with powers varying according to status, but County Boroughs were large cities with full independence from their County. The County of London was divided into Metropolitan Boroughs, plus the City of London which had the unique status of County Corporate. This file represents the system as it was used to report the 1911 Census of Population. To distinguish between identical place names with different administrative geographies, an Administrative County Boundaries layer may be used to add County name attributes to this layer. Statistical data and other information used in “A Vision of Britain through Time” can be accessed here: http://www.visionofbritain.org.uk/data.

This is a spatial dataset which defines the regions for the Living England Phase IV habitat classification. 14 regions were created in England to balance resource requirements and scalability. The regions are based on National Character Areas which are grouped such that each region is covered by a single European Space Agency Sentinel-2 satellite orbit (with the exception of Zone 10 in the SE which is covered by two orbits), and such that the regions are approximately similar in size.

A PDF map showing the registration districts in England and Wales as at December 2015. (File Size - 1 MB)

This layer of the map-based index (GeoIndex) shows the boundaries of the G-BASE (Geochemical Baseline Survey of the Environment) project mapping areas, which are reported as geochemical atlases. The majority of atlases are for stream sediment, with data on stream water and soil included where available. Separate stream sediment, soil and stream water atlases have been published for Wales. Hard copy atlases are available for Shetland, Orkney, South Orkney and Caithness, Sutherland, Hebrides, Great Glen, East Grampians, Argyll, Southern Scotland, Lake District, NE England, NW England and N Wales and Wales. Digital atlases/map products are available for the Clyde Basin, Central England, London Region and SW England. National digital atlas products are available also.

The Forestry Commission has developed a series of sensitivity maps, based on nationally available and consistent datasets, to indicate where there are likely to be fewer sensitivities to woodland creation.

These maps will help to indicate to landowners whether there is likely to be potential to establish new woodland on their land, and where there may be sensitivities that would preclude woodland creation.

The maps do not indicate that, where there is a low sensitivity to new woodland being created, that planting will be agreed by the Forestry Commission, the regulator for woodland and forestry projects in England. However, the low sensitivity areas have fewest identified constraints to address, and it should be easier to agree creating new woodland here than in other areas.

Likewise, creation of new woodland, particularly of native woodland, may be appropriate outside ‘low sensitivity’ areas, but the appropriateness of proposals in these areas will again be determined by the Forestry Commission, including through responding to the views of Natural England, Environment Agency, Historic England, the Local Authority and other stakeholders, where relevant.

The Sensitivity Maps exclude all land that is unsuitable for planting, including urban areas, existing (and assumed) woodland and habitats that are considered too wet, too rocky, and too salty to support the growth of trees. This is achieved through restricting the Sensitivity Maps to the following land covers, based on the most recent update of Landcover Map:

Acid grassland Arable and horticulture Calcareous grassland Heather Heather grassland Improved grassland Neutral grassland

The spatial datasets and individual layers of those datasets that define land as unsuitable and low, medium, or high sensitivity for woodland creation in the Full Sensitivity Map version 3.0, the Low Sensitivity Map and their variants are set out in the document here:

www.gov.uk/guidance/a-guide-to-forestry-commissions-sensitivity-maps-for-woodland-creation

Attributes:

‘Sensitivity’ = the sensitivity to woodland creation level the land has been assigned.

‘Area (Hectares)’ = the area in hectares of the polygon.

Lineage:

This is version 3.0 of these layers, having gone through several iterations where new data inputs were added and changes made to how these were treated as sensitivities for woodland creation. These are the first versions of the layers to be published as Open Data.

The 1:63 360 / 1:50 000 scale map series are the most useful scale for most purposes. They provide almost complete coverage of onshore Great Britain. The BGS collection of 1:63 360 and 1:50 000 scale maps comprises two map series: - Geological Survey of England and Wales 1:63 360 / 1:50 000 Geological Map Series [New Series]. These maps are based on the Ordnance Survey One-inch New Series topographic basemaps and provide almost complete coverage of England and Wales, with the exception of sheet 180 (Knighton). The quarter-sheets of 1:63 360 Old Series sheets 91 to 110 coincide with sheets 1 to 73 of the New Series maps. These earlier maps often carry two sheet numbers which refer to the Old Series and the New Series. - Geological Survey of Scotland 1:63 360 / 1:50 000 Geological Map Series. These maps are based on the Ordnance Survey First, Second, Third and Fourth editions of the One-inch map of Scotland. The maps used the most recent topographic basemap available at the time. In the Western Isles, one-inch mapping was abandoned and replaced by maps at 1:100 000 scale, which are associated with this series. Sheets were traditionally issued at 1:63 360 scale, with the first 1:50 000 maps appearing in 1972. Sheets at 1:50 000 scale may be either facsimile enlargements of an existing 1:63 360 sheets, or may contain new geology and cartography. The latter bear the additional series designation '1:50 000 series'. Within the Scottish series, new mapping at 1:50 000 scale was split into east and west sheets. For example, the original one-inch sheet 32 became 1:50 000 sheets 32E and 32W. A number of irregular sheets were also introduced with the new 1:50 000 scale mapping. There are a number of irregular special sheets within both series. Geological maps represent a geologist's compiled interpretation of the geology of an area. A geologist will consider the data available at the time, including measurements and observations collected during field campaigns, as well as their knowledge of geological processes and the geological context to create a model of the geology of an area. This model is then fitted to a topographic basemap and drawn up at the appropriate scale, with generalization if necessary, to create a geological map, which is a representation of the geological model. Explanatory notes and vertical and horizontal cross sections may be published with the map. Geological maps may be created to show various aspects of the geology, or themes. The most common map themes held by BGS are solid (later referred to as bedrock) and drift (later referred to as superficial). These maps are, for the most part, hard-copy paper records stored in the National Geoscience Data Centre (NGDC) and are delivered as digital scans through the BGS website.

A set of targeting maps to increase the environmental benefits delivered through Higher Level Stewardship. This data aims to help secure the most appropriate management in geographic areas where environmental outcomes are likely to be greatest. The targeting is first systematic joining together of information on biodiversity, landscape, natural resource protection, public access and historic interests.