This web map contains subscription content, and you will see an error message when opening it. Click Sign In in the upper right to enter your organization account login. Once you log in, the map will refresh with all layers; click Save As to save the map for further modification and use.

This layer provides an estimate of flood frequency as one of seven classes:

None: No reasonable possibility of flooding; one chance out of 500 of flooding in any year or less than 1 time in 500 years.Very Rare: Flooding is very unlikely but is possible under extremely unusual weather conditions; less than 1 percent chance of flooding in any year or less than 1 time in 100 years but more than 1 time in 500 years.Rare: Flooding is unlikely but is possible under unusual weather conditions; 1 to 5 percent chance of flooding in any year or nearly 1 to 5 times in 100 years.Occasional: Flooding is expected infrequently under usual weather conditions; 5 to 50 percent chance of flooding in any year or 5 to 50 times in 100 years.Common: (Obsolete Class) Combination of Occasional and FrequentFrequent: Flooding is likely to occur often under usual weather conditions; more than a 50 percent chance of flooding in any year (i.e., 50 times in 100 years), but less than a 50 percent chance of flooding in all months in any year.Very Frequent: Flooding is likely to occur very often under usual weather conditions; more than a 50 percent chance of flooding in all months of any year.Dataset SummaryPhenomenon Mapped: Flooding frequencyUnits: ClassesCell Size: 30 metersSource Type: DiscretePixel Type: Unsigned integerData Coordinate System: WKID 5070 USA Contiguous Albers Equal Area Conic USGS version (contiguous US, Puerto Rico, US Virgin Islands), WKID 3338 WGS 1984 Albers (Alaska), WKID 4326 WGS 1984 Decimal Degrees (Guam, Republic of the Marshall Islands, Northern Mariana Islands, Republic of Palau, Federated States of Micronesia, American Samoa, and Hawaii).Mosaic Projection: Web Mercator Auxiliary SphereExtent: Contiguous United States, Alaska, Hawaii, Puerto Rico, Guam, US Virgin Islands, Northern Mariana Islands, Republic of Palau, Republic of the Marshall Islands, Federated States of Micronesia, and American Samoa.Source: Natural Resources Conservation ServicePublication Date: November 2023ArcGIS Server URL: https://landscape11.arcgis.com/arcgis/Data from the gNATSGO database was used to create the layer for the for the contiguous United States and Alaska. The remaining areas were created with the gSSURGO database (Hawaii, Guam, Puerto Rico, the U.S. Virgin Islands, Northern Marianas Islands, Palau, Federated States of Micronesia, Republic of the Marshall Islands, and American Samoa).This layer is derived from the 30m (contiguous U.S.) and 10m rasters (all other regions) produced by the Natural Resources Conservation Service (NRCS). The value for flooding frequency is derived from the gSSURGO map unit aggregated attribute table field Flooding Frequency - Dominant Condition (flodfreqdcd).What can you do with this Layer? This layer is suitable for both visualization and analysis across the ArcGIS system. This layer can be combined with your data and other layers from the ArcGIS Living Atlas of the World in ArcGIS Online and ArcGIS Pro to create powerful web maps that can be used alone or in a story map or other application.Because this layer is part of the ArcGIS Living Atlas of the World it is easy to add to your map:In ArcGIS Online, you can add this layer to a map by selecting Add then Browse Living Atlas Layers. A window will open. Type "flooding frequency" in the search box and browse to the layer. Select the layer then click Add to Map.In ArcGIS Pro, open a map and select Add Data from the Map Tab. Select Data at the top of the drop down menu. The Add Data dialog box will open on the left side of the box, expand Portal if necessary, then select Living Atlas. Type "flooding frequency" in the search box, browse to the layer then click OK.In ArcGIS Pro you can use the built-in raster functions or create your own to create custom extracts of the data. Imagery layers provide fast, powerful inputs to geoprocessing tools, models, or Python scripts in Pro.The ArcGIS Living Atlas of the World provides an easy way to explore many other beautiful and authoritative maps on hundreds of topics like this one.

IMPORTANT NOTICE This item has moved to a new organization and entered Mature Support on February 3rd, 2025. This item is scheduled to be Retired and removed from ArcGIS Online on June 27th, 2025. We encourage you to switch to using the item on the new organization as soon as possible to avoid any disruptions within your workflows. If you have any questions, please feel free to leave a comment below or email our Living Atlas Curator (livingatlascurator@esri.ca) The new version of this item can be found here Flood maps are created by combining hydraulic model results with high-accuracy ground information. Field surveys and LiDAR remote sensing are used to collect river and floodplain elevations, channel cross section data, bridge and culvert information, and flood berm details. A hydrology assessment using recorded and historic flow measurements is typically used to estimate river flows for a wide range of possible open water floods with different chances of occurring each year. When appropriate, an ice jam frequency analysis is undertaken. All this information is used to build a hydraulic model of a river system, which is calibrated using highwater marks and aerial imagery from past floods to ensure that results for the different flood flows being mapped are reasonable. Flood inundation maps show areas at risk for different sized floods, including ice jam floods in some communities. These maps also identify areas that could be flooded if berms or other flood control structures fail and are typically used for emergency response planning and to inform local infrastructure design. Flood hazards have not been identified along all rivers or through all communities, and it is important to remember that risk exists in areas without provincial flood maps. Visit www.floodhazard.alberta.ca for more information about the Flood Hazard Identification Program. The website includes different sections for final flood studies and for draft flood studies. Flood maps can be viewed directly using the Flood Awareness Map Application at floods.alberta.ca. The Alberta Flood Mapping GIS dataset is updated when new information is available or existing information changes; therefore, the Government of Alberta assumes no responsibility for discrepancies at the time of use.Posted on 2020-12-22 to GeoDiscover Alberta by Alberta Environment and Parks.

IMPORTANT NOTICE This item has moved to a new organization and entered Mature Support on February 3rd, 2025. This item is scheduled to be Retired and removed from ArcGIS Online on June 27th, 2025. We encourage you to switch to using the item on the new organization as soon as possible to avoid any disruptions within your workflows. If you have any questions, please feel free to leave a comment below or email our Living Atlas Curator (livingatlascurator@esri.ca) The new version of this item can be found here Flood maps are created by combining hydraulic model results with high-accuracy ground information. Field surveys and LiDAR remote sensing are used to collect river and floodplain elevations, channel cross section data, bridge and culvert information, and flood berm details. A hydrology assessment using recorded and historic flow measurements is typically used to estimate river flows for a wide range of possible open water floods with different chances of occurring each year. When appropriate, an ice jam frequency analysis is undertaken. All this information is used to build a hydraulic model of a river system, which is calibrated using highwater marks and aerial imagery from past floods to ensure that results for the different flood flows being mapped are reasonable. Flood inundation maps show areas at risk for different sized floods, including ice jam floods in some communities. These maps also identify areas that could be flooded if berms or other flood control structures fail and are typically used for emergency response planning and to inform local infrastructure design. Flood hazards have not been identified along all rivers or through all communities, and it is important to remember that risk exists in areas without provincial flood maps. Visit www.floodhazard.alberta.ca for more information about the Flood Hazard Identification Program. The website includes different sections for final flood studies and for draft flood studies. Flood maps can be viewed directly using the Flood Awareness Map Application at floods.alberta.ca. The Alberta Flood Mapping GIS dataset is updated when new information is available or existing information changes; therefore, the Government of Alberta assumes no responsibility for discrepancies at the time of use.Posted on 2020-12-22 to GeoDiscover Alberta by Alberta Environment and Parks.

The National Water Model provides forecasts of flow volume and velocity for over 2.7 million stream and river segments in the contiguous United States and is the National Weather Service’s primary tool for predicting river flooding. Two versions of the National Water Model are available in ArcGIS Living Atlas: a short-term model that updates every hour for 18-hrs, and a medium-range model that updates every 6-hrs for a 10-day outlook.This layer provides a summary of the 10-day forecast and adds calculated fields such as flow anomaly, maximum anomaly, and the time at maximum flow. It has been filtered to display only areas with positive flow anomalies (i.e., flooding). Leveraging ArcGIS Online hosted feature services, it is ideal for doing spatial and time queries, use in Dashboards, and supporting a variety of custom symbology.By default, this layer is showing the maximum expected flow for each river segment since the 10-day model is ideal for providing a more synoptic understanding of potential flooding.Companion LayerNational Water Model Maximum Flow (Hourly Forecast)Related LayersNational Water Model (10-Day Forecast)National Water Model (10-Day Anomaly Forecast)National Water Model (Hourly Forecast)National Water Model (Hourly Anomaly Forecast)RevisionsJan 27, 2022: Added 'Forecast Origin' field. Providing the Origin Date/Time of the Forecast Set

This map is part of Indicators of the Planet. Please see https://livingatlas.arcgis.com/indicatorsThe Living Atlas layer shown here is part of a time series of the annual ESA CCI (Climate Change Initiative) land cover maps of the worldESA has produced land cover maps for the years since 1992. These are available at the European Space Agency Climate Change Initiative website.This map displays 2018:Rainfed CroplandHerbaceous CroplandTree or Shrub CroplandIrrigated or Post-Flooding CroplandMostly Cropland in a Mosaic with Natural VegetationMostly Natural Vegetation in a Mosaic with CroplandUrban Areas

Soils and soil moisture greatly influence the water cycle and have impacts on runoff, flooding and agriculture. Soil type and soil particle composition (sand, clay, silt) affect soil moisture and the ability of the soil to retain water. Soil moisture is also affected by levels of evaporation and plant transpiration, potentially leading to near dryness and eventual drought.Measuring and monitoring soil moisture can ensure the fitness of your crops and help predict or prepare for flash floods and drought. The GLDAS soil moisture data is useful for modeling these scenarios and others, but only at global scales. Dataset SummaryThe GLDAS Soil Moisture layer is a time-enabled image service that shows average monthly soil moisture from 2000 to the present at four different depth levels. It is calculated by NASA using the Noah land surface model, run at 0.25 degree spatial resolution using satellite and ground-based observational data from the Global Land Data Assimilation System (GLDAS-1). The model is run with 3-hourly time steps and aggregated into monthly averages. Review the complete list of model inputs, explore the output data (in GRIB format), and see the full Hydrology Catalog for all related data and information!What can you do with this layer?This layer is suitable for both visualization and analysis. It can be used in ArcGIS Online in web maps and applications and can be used in ArcGIS Desktop. The GLDAS soil moisture data is useful for modeling, but only at global scales. Time: This is a time-enabled layer. It shows the total evaporative loss during the map's time extent, or if time animation is disabled, a time range can be set using the layer's multidimensional settings. The map shows the sum of all months in the time extent. Minimum temporal resolution is one month; maximum is one year.Depth: This layer has four depth levels. By default they are summed, but you can view each using the multidimensional filter. You must disable time animation on the layer before using its multidimensional filter. It is also possible to toggle between depth layers using raster functions, accessed through the Image Display tab.Important: You must switch from the cartographic renderer to the analytic renderer in the processing template tab in the layer properties window before using this layer as an input to geoprocessing tools.This layer has query, identify, and export image services available. This layer is part of a larger collection of earth observation maps that you can use to perform a wide variety of mapping and analysis tasks.The Living Atlas of the World provides an easy way to explore the earth observation layers and many other beautiful and authoritative maps on hundreds of topics.Geonet is a good resource for learning more about earth observations layers and the Living Atlas of the World. Follow the Living Atlas on GeoNet.

Feature service containing the SQL View of the"Environmentally Threatened Communities web map", combining selected fields from the following separate layers into one view: Denali Commission Summary, Permafrost, Flood, Erosion, Best Practice Scores, ETC Hazards Summary, ANSCA MLT Status Layer, MLT Communities.Also contains symbolized Community Infrastructure digitized from CAD data (source DGGS) and edited Social Vulnerability Index layers from the living atlas (ACS).This feature service has symbology to best practice scores > 60, between 50 and 60 (ineligible for Capital Improvement Project [CIP] funding) and < 50 (ineligible for Microloans for water and wastewater infrastructure).

The Federal Emergency Management Agency (FEMA) produces Flood Insurance Rate maps and identifies Special Flood Hazard Areas as part of the National Flood Insurance Program's floodplain management. Special Flood Hazard Areas have regulations that include the mandatory purchase of flood insurance for holders of federally regulated mortgages. In addition, in the USA, this layer can help planners and firms avoid areas of flood risk and also avoid additional cost to carry insurance for certain planned activities.Dataset SummaryPhenomenon Mapped: Flood Hazard AreasUnits: NoneCell Sizes: 10 meters (default), 30 meters, and 90 metersSource Type: ThematicPixel Type: Unsigned integerData Coordinate System: USA Contiguous Albers Equal Area Conic USGS version (contiguous US, Puerto Rico, US Virgin Islands), WGS 1984 Albers (Alaska), Hawaii Albers Equal Area Conic (Hawaii), Western Pacific Albers Equal Area Conic (Guam, Northern Mariana Islands, and American Samoa)Mosaic Projection: Web Mercator Auxiliary SphereExtents: Contiguous United States, Alaska, Hawaii, Puerto Rico, Guam, US Virgin Islands, Northern Mariana Islands and American Samoa.Source: Federal Emergency Management Agency (FEMA)Publication Date: June 27, 2024ArcGIS Server URL: https://landscape11.arcgis.com/arcgis/This layer is derived from the June 27, 2024 version Flood Insurance Rate Map feature class S_FLD_HAZ_AR. The vector data were then flagged with an index of 88 classes, representing a unique combination of values displayed by three renderers. (In three resolutions the three renderers make nine processing templates.) Repair Geometry was run on the set of features, then the features were rasterized using the 88 class index at a resolutions of 10, 30, and 90 meters, using the Polygon to Raster tool and the "MAXIMUM_COMBINED_AREA" option. Not every part of the United States is covered by flood rate maps. This layer compiles all the flood insurance maps available at the time of publication. To make analysis easier, areas that were NOT mapped by FEMA for flood insurance rates no longer are served as NODATA but are filled in with a value of 250, representing any unmapped areas which appear in the US Census' boundary of the USA states and territories. The attribute table corresponding to value 250 will indicate that the area was not mapped.What can you do with this Layer? This layer is suitable for both visualization and analysis across the ArcGIS system. This layer can be combined with your data and other layers from the ArcGIS Living Atlas of the World in ArcGIS Online and ArcGIS Pro to create powerful web maps that can be used alone or in a story map or other application.Because this layer is part of the ArcGIS Living Atlas of the World it is easy to add to your map:In ArcGIS Online, you can add this layer to a map by selecting Add then Browse Living Atlas Layers. A window will open. Type "flood hazard areas" in the search box and browse to the layer. Select the layer then click Add to Map.In ArcGIS Pro, open a map and select Add Data from the Map Tab. Select Data at the top of the drop down menu. The Add Data dialog box will open on the left side of the box, expand Portal if necessary, then select Living Atlas. Type "flood hazard areas" in the search box, browse to the layer then click OK.In ArcGIS Pro you can use the built-in raster functions to create custom extracts of the data. Imagery layers provide fast, powerful inputs to geoprocessing tools, models, or Python scripts in Pro.The ArcGIS Living Atlas of the World provides an easy way to explore many other beautiful and authoritative maps on hundreds of topics like this one.Processing TemplatesCartographic Renderer - The default. These are meaningful classes grouped by FEMA which group its own Flood Zone Type and Subtype fields. This renderer uses FEMA's own cartographic interpretations of its flood zone and zone subtype fields to help you identify and assess risk. Flood Zone Type Renderer - Specifically renders FEMA FLD_ZONE (flood zone) attribute, which distinguishes the original, broadest categories of flood zones. This renderer displays high level categories of flood zones, and is less nuanced than the Cartographic Renderer. For example, a fld_zone value of X can either have moderate or low risk depending on location. This renderer will simply render fld_zone X as its own color without identifying "500 year" flood zones within that category.Flood Insurance Requirement Renderer - Shows Special Flood Hazard Area (SFHA) true-false status. This may be helpful if you want to show just the places where flood insurance is required. A value of True means flood insurance is mandatory in a majority of the area covered by each 10m pixel.Each of these three renderers have templates at three different raster resolutions depending on your analysis needs. To include the layer in web maps to serve maps and queries, the 10 meter renderers are the preferred option. These are served with overviews and render at all resolutions. However, when doing analysis of larger areas, we now offer two coarser resolutions of 30 and 90 meters in processing templates for added convenience and time savings.

IMPORTANT NOTICE This item has moved to a new organization and entered Mature Support on February 3rd, 2025. This item is scheduled to be Retired and removed from ArcGIS Online on June 27th, 2025. We encourage you to switch to using the item on the new organization as soon as possible to avoid any disruptions within your workflows. If you have any questions, please feel free to leave a comment below or email our Living Atlas Curator (livingatlascurator@esri.ca) The new version of this item can be found here Flood maps are created by combining hydraulic model results with high-accuracy ground information. Field surveys and LiDAR remote sensing are used to collect river and floodplain elevations, channel cross section data, bridge and culvert information, and flood berm details. A hydrology assessment using recorded and historic flow measurements is typically used to estimate river flows for a wide range of possible open water floods with different chances of occurring each year. When appropriate, an ice jam frequency analysis is undertaken. All this information is used to build a hydraulic model of a river system, which is calibrated using highwater marks and aerial imagery from past floods to ensure that results for the different flood flows being mapped are reasonable. Flood inundation maps show areas at risk for different sized floods, including ice jam floods in some communities. These maps also identify areas that could be flooded if berms or other flood control structures fail and are typically used for emergency response planning and to inform local infrastructure design. Flood hazards have not been identified along all rivers or through all communities, and it is important to remember that risk exists in areas without provincial flood maps. Visit www.floodhazard.alberta.ca for more information about the Flood Hazard Identification Program. The website includes different sections for final flood studies and for draft flood studies. Flood maps can be viewed directly using the Flood Awareness Map Application at floods.alberta.ca. The Alberta Flood Mapping GIS dataset is updated when new information is available or existing information changes; therefore, the Government of Alberta assumes no responsibility for discrepancies at the time of use.Posted on 2020-12-22 to GeoDiscover Alberta by Alberta Environment and Parks.

IMPORTANT NOTICE This item has moved to a new organization and entered Mature Support on February 3rd, 2025. This item is scheduled to be Retired and removed from ArcGIS Online on June 27th, 2025. We encourage you to switch to using the item on the new organization as soon as possible to avoid any disruptions within your workflows. If you have any questions, please feel free to leave a comment below or email our Living Atlas Curator (livingatlascurator@esri.ca) The new version of this item can be found here Flood maps are created by combining hydraulic model results with high-accuracy ground information. Field surveys and LiDAR remote sensing are used to collect river and floodplain elevations, channel cross section data, bridge and culvert information, and flood berm details. A hydrology assessment using recorded and historic flow measurements is typically used to estimate river flows for a wide range of possible open water floods with different chances of occurring each year. When appropriate, an ice jam frequency analysis is undertaken. All this information is used to build a hydraulic model of a river system, which is calibrated using highwater marks and aerial imagery from past floods to ensure that results for the different flood flows being mapped are reasonable. Flood inundation maps show areas at risk for different sized floods, including ice jam floods in some communities. These maps also identify areas that could be flooded if berms or other flood control structures fail and are typically used for emergency response planning and to inform local infrastructure design. Flood hazards have not been identified along all rivers or through all communities, and it is important to remember that risk exists in areas without provincial flood maps. Visit www.floodhazard.alberta.ca for more information about the Flood Hazard Identification Program. The website includes different sections for final flood studies and for draft flood studies. Flood maps can be viewed directly using the Flood Awareness Map Application at floods.alberta.ca. The Alberta Flood Mapping GIS dataset is updated when new information is available or existing information changes; therefore, the Government of Alberta assumes no responsibility for discrepancies at the time of use.Posted on 2020-12-22 to GeoDiscover Alberta by Alberta Environment and Parks.

According to NOAA, "Floods are the most common and widespread of all weather-related natural disasters" and as our earth continues to warm due to climate change, precipitation events are becoming more frequent and more intense, dropping record-setting amounts of water from the sky. Whenever the volume of water on land overcomes the capacity of natural and built drainage systems to carry it away, inland flooding can result. Floods can happen in minutes or over long periods of time, but in either case the effects can be devastating and life-threatening. Building community resilience to inland flooding involves several steps including assessing vulnerability and risk of the community members.© 2024 Adobe Stock. All rights reserved.By utilizing decades of satellite observation data and historical flood maps, models are built that can predict land cover and flood risk in the year 2050. Since we know property and life in flood prone areas is at-risk, we can use the projected maps to plan for flood resilience. This layer displays census tracts that are ranked according to which would benefit most from slowing development. The ranking is based upon a bivariate map built with the following attributes:Percent of Properties with Flooding in 30 Years in the Return Period 100 Scenario (%) - Data no longer available.Average Vulnerability to Landcover ChangeThese attribute links take you to the original data sources. Preprocessing was needed to prepare many of these inputs for inclusion in our index. The links are provided for reference only.This layer is one of six in a series developed to support local climate resilience planning. Intended as planning tools for policy makers, climate resilience planners, and community members, these layers highlight areas of the community that are most likely to benefit from the resilience intervention it supports. Each layer focuses on one specific flood resilience intervention that is intended to help mitigate against the climate hazard. Building flood resilience is something that should be done now, but it's also important to consider the future of our communities, and we are fortunate to have these 2050 projections. With this information, community planners have the opportunity to get ahead of climate change induced hazards like inland flooding. Layers in the inland flooding series include,Where Would Better Flood Awareness Improve Inland Flood Resilience?Where Would Better Evacuation Routes Improve Flood Resilience?Where Would Open Space Preservation Improve Flood Resilience?Where Would Reducing Impervious Surfaces Improve Flood Resilience?Where Would Restoring Built-up Areas Improve Flood Resilience?Where Would Future Flood Prone Areas Benefit From Slowing Development?Did you know you can build your own climate resilience index or use ours and customize it? The Customize a climate resilience index Tutorial provides more information on the index and also walks you through steps for taking our index and customizing it to your needs so you can create intervention maps better suited to your location and sourced from your own higher resolution data. For more information about how Esri enriched the census tracts with exposure, demographic, and environmental data to create composite indices called intervention indices, please read this technical reference.This feature layer was created from the Climate Resilience Planning Census Tracts hosted feature layer view and is one of 18 similar intervention layers, all of which can be found in ArcGIS Living Atlas of the World.

The Farmland Protection Policy Act, part of the 1981 Farm Bill, is intended to limit federal activities that contribute to the unnecessary conversion of farmland to other uses. The law applies to construction projects funded by the federal government such as highways, airports, and dams, and to the management of federal lands. As part of the implementation of this law, the Natural Resources Conservation Service identifies high quality agricultural soils as prime farmland, unique farmland, and land of statewide or local importance. Each category may contain one or more limitations such as Prime Farmland if Irrigated. For a complete list of categories and definitions, see the National Soil Survey Handbook.All areas are prime farmlandFarmland of local importanceFarmland of statewide importanceFarmland of statewide importance, if drainedFarmland of statewide importance, if drained and either protected from flooding or not frequently flooded during the growing seasonFarmland of statewide importance, if irrigatedFarmland of statewide importance, if irrigated and drainedFarmland of statewide importance, if irrigated and either protected from flooding or not frequently flooded during the growing seasonFarmland of statewide importance, if irrigated and reclaimed of excess salts and sodiumFarmland of statewide importance, if irrigated and the product of I (soil erodibility) x C (climate factor) does not exceed 60Farmland of statewide importance, if protected from flooding or not frequently flooded during the growing seasonFarmland of statewide importance, if warm enoughFarmland of statewide importance, if warm enough, and either drained or either protected from flooding or not frequently flooded during the growing seasonFarmland of unique importanceNot prime farmlandPrime farmland if drainedPrime farmland if drained and either protected from flooding or not frequently flooded during the growing seasonPrime farmland if irrigatedPrime farmland if irrigated and drainedPrime farmland if irrigated and either protected from flooding or not frequently flooded during the growing seasonPrime farmland if irrigated and reclaimed of excess salts and sodiumPrime farmland if irrigated and the product of I (soil erodibility) x C (climate factor) does not exceed 60Prime farmland if protected from flooding or not frequently flooded during the growing seasonPrime farmland if subsoiled, completely removing the root inhibiting soil layerDataset SummaryPhenomenon Mapped: FarmlandUnits: ClassesCell Size: 30 metersSource Type: DiscretePixel Type: Unsigned integerData Coordinate System: USA Contiguous Albers Equal Area Conic USGS version (contiguous US, Puerto Rico, US Virgin Islands), WGS 1984 Albers (Alaska), Hawaii Albers Equal Area Conic (Hawaii), Western Pacific Albers Equal Area Conic (Guam, Marshall Islands, Northern Marianas Islands, Palau, Federated States of Micronesia, and American Samoa)Mosaic Projection: Web Mercator Auxiliary SphereExtent: Contiguous United States, Alaska, Hawaii, Puerto Rico, Guam, US Virgin Islands, Marshall Islands, Northern Marianas Islands, Palau, Federated States of Micronesia, and American SamoaSource: Natural Resources Conservation ServicePublication Date: July 2020ArcGIS Server URL: https://landscape11.arcgis.com/arcgis/Data from the gNATSGO database was used to create the layer for the contiguous United States, Alaska, Puerto Rico, and the U.S. Virgin Islands. The remaining areas were created with the gSSURGO database (Hawaii, Guam, Marshall Islands, Northern Marianas Islands, Palau, Federated States of Micronesia, and American Samoa).This layer is derived from the 30m (contiguous U.S.) and 10m rasters (all other regions) produced by the Natural Resources Conservation Service (NRCS). The value for farmland class is derived from the gSSURGO map unit table field Farm Class (farmlndcl).What can you do with this Layer? This layer is suitable for both visualization and analysis across the ArcGIS system. This layer can be combined with your data and other layers from the ArcGIS Living Atlas of the World in ArcGIS Online and ArcGIS Pro to create powerful web maps that can be used alone or in a story map or other application.Because this layer is part of the ArcGIS Living Atlas of the World it is easy to add to your map:In ArcGIS Online, you can add this layer to a map by selecting Add then Browse Living Atlas Layers. A window will open. Type "farmland" in the search box and browse to the layer. Select the layer then click Add to Map.In ArcGIS Pro, open a map and select Add Data from the Map Tab. Select Data at the top of the drop down menu. The Add Data dialog box will open on the left side of the box, expand Portal if necessary, then select Living Atlas. Type "farmland" in the search box, browse to the layer then click OK.In ArcGIS Pro you can use the built-in raster functions or create your own to create custom extracts of the data. Imagery layers provide fast, powerful inputs to geoprocessing tools, models, or Python scripts in Pro.Online you can filter the layer to show subsets of the data using the filter button and the layer's built-in raster functions.The ArcGIS Living Atlas of the World provides an easy way to explore many other beautiful and authoritative maps on hundreds of topics like this one.

The Federal Emergency Management Agency (FEMA) produces Flood Insurance Rate maps and identifies Special Flood Hazard Areas as part of the National Flood Insurance Program's floodplain management. Special Flood Hazard Areas have regulations that include the mandatory purchase of flood insurance.Dataset SummaryPhenomenon Mapped: Flood Hazard AreasCoordinate System: Web Mercator Auxiliary SphereExtent: Contiguous United States, Alaska, Hawaii, Puerto Rico, Guam, US Virgin Islands, Northern Marianas Islands and American Samoa.Visible Scale: The layer is limited to scales of 1:1,000,000 and larger. Use the USA Flood Hazard Areas imagery layer for smaller scales.Source: Federal Emergency Management AgencyPublication Date: October 13, 2021This layer is derived from the October 13, 2021 version of the National Flood Hazard Layer feature class S_Fld_Haz_Ar. The data were aggregated into eight classes to produce the Esri Symbology field based on symbology provided by FEMA. All other layer attributes are derived from the National Flood Hazard Layer.The layer was projected to Web Mercator Auxiliary Sphere, then the repair geometry geoprocessing tool was run on it. Its resolution was set to 0.0001 meter.To improve performance Flood Zone values "Area Not Included", "Open Water", "D", "NP", and No Data were removed from the layer. Areas with Flood Zone value "X" subtype "Area of Minimal Flood Hazard" were also removed. An imagery layer created from this dataset provides access to the full set of records in the National Flood Hazard Layer.A web map featuring this layer is available for you to use.What can you do with this Feature Layer?Feature layers work throughout the ArcGIS system. Generally your work flow with feature layers will begin in ArcGIS Online or ArcGIS Pro. Below are just a few of the things you can do with a feature service in Online and Pro.ArcGIS OnlineAdd this layer to a map in the map viewer. The layer is limited to scales of approximately 1:1,000,000 or larger but an imagery layer created from the same data can be used at smaller scales to produce a webmap that displays across the full range of scales. The layer or a map containing it can be used in an application.Change the layer’s transparency and set its visibility rangeOpen the layer’s attribute table and make selections and apply filters. Selections made in the map or table are reflected in the other. Center on selection allows you to zoom to features selected in the map or table and show selected records allows you to view the selected records in the table.Change the layer’s style and filter the data. For example, you could change the symbology field to Special Flood Hazard Area and set a filter for = “T” to create a map of only the special flood hazard areas. Add labels and set their propertiesCustomize the pop-upUse in analysis tools to discover patterns in the dataArcGIS ProAdd this layer to a 2d or 3d map. The same scale limit as Online applies in ProUse as an input to geoprocessing. For example, copy features allows you to select then export portions of the data to a new feature class. Areas up to 1,000-2,000 features can be exported successfully.Change the symbology and the attribute field used to symbolize the dataOpen table and make interactive selections with the mapModify the pop-upsApply Definition Queries to create sub-sets of the layerThis layer is part of the Living Atlas of the World that provides an easy way to explore the landscape layers and many other beautiful and authoritative maps on hundreds of topics.

Sea level rise is an ever-looming climate hazard facing the coastal communities of the United States. Communities big and small need easy-to-use tools for climate resilience planning and mitigation strategies. This layer shows coastal census tracts that are at risk from sea level rise and also the percentage of the census tract that lives below the poverty level. This layer should be used to identify and prioritize where to implement sea level rise interventions. This layer uses bivariate symbology with the following attributes: Percent of the Tract Area Predicted to be Below Sea Level by 2050 (%)Percent of Population whose income in the past 12 months is below poverty level (%)These attribute links take you to the original data sources. Preprocessing was needed to prepare many of these inputs for inclusion in our index. The links are provided for reference only.This layer is one of six in a series developed to support local climate resilience planning. Intended as planning tools for policy makers, climate resilience planners, and community members, these layers highlight areas of the community that are most likely to benefit from the resilience intervention it supports. Each map focuses on one specific sea level rise intervention that is intended to help mitigate against the climate hazard.Each intervention index will help with planning and prioritizing mitigations against a suite of climate change hazards. A climate resilience intervention index can be used to rank census tracts in a particular area as benefitting more or less from that particular intervention.

Each intervention index in this set is envisioned to help with planning and prioritizing mitigations against sea level rise.Layers in the sea level rise hazard series include,Where Would Planting Mangrove Trees Mitigate Coastal Flooding?Where Would Planting Marsh Grass Mitigate Coastal Flooding?Where Would a Buddy Program Improve Coastal Flooding Preparedness?Where Would Coastal Flooding Awareness Increase Resilience?Low-income Households At Risk From Sea Level RiseDisadvantaged Communities At Risk From Sea Level RiseDid you know you can build your own climate resilience index or use ours and customize it? The Customize a climate resilience index Tutorial provides more information on the index and also walks you through steps for taking our index and customizing it to your needs so you can create intervention maps better suited to your location and sourced from your own higher resolution data. For more information about how Esri enriched the census tracts with exposure, demographic, and environmental data to create composite indices called intervention indices, please read this technical reference.This feature layer was created from the Climate Resilience Planning Census Tracts hosted feature layer view and is one of 18 similar intervention layers, all of which can be found in ArcGIS Living Atlas of the World.

The Farmland Protection Policy Act, part of the 1981 Farm Bill, is intended to limit federal activities that contribute to the unnecessary conversion of farmland to other uses. The law applies to construction projects funded by the federal government such as highways, airports, and dams, and to the management of federal lands. As part of the implementation of this law, the Natural Resources Conservation Service identifies high quality agricultural soils as prime farmland, unique farmland, and land of statewide or local importance. Each category may contain one or more limitations such as Prime Farmland if Irrigated. For a complete list of categories and definitions, see the National Soil Survey Handbook.All areas are prime farmlandFarmland of local importanceFarmland of statewide importanceFarmland of statewide importance, if drainedFarmland of statewide importance, if drained and either protected from flooding or not frequently flooded during the growing seasonFarmland of statewide importance, if irrigatedFarmland of statewide importance, if irrigated and drainedFarmland of statewide importance, if irrigated and either protected from flooding or not frequently flooded during the growing seasonFarmland of statewide importance, if irrigated and reclaimed of excess salts and sodiumFarmland of statewide importance, if irrigated and the product of I (soil erodibility) x C (climate factor) does not exceed 60Farmland of statewide importance, if protected from flooding or not frequently flooded during the growing seasonFarmland of statewide importance, if warm enoughFarmland of statewide importance, if warm enough, and either drained or either protected from flooding or not frequently flooded during the growing seasonFarmland of unique importanceNot prime farmlandPrime farmland if drainedPrime farmland if drained and either protected from flooding or not frequently flooded during the growing seasonPrime farmland if irrigatedPrime farmland if irrigated and drainedPrime farmland if irrigated and either protected from flooding or not frequently flooded during the growing seasonPrime farmland if irrigated and reclaimed of excess salts and sodiumPrime farmland if irrigated and the product of I (soil erodibility) x C (climate factor) does not exceed 60Prime farmland if protected from flooding or not frequently flooded during the growing seasonPrime farmland if subsoiled, completely removing the root inhibiting soil layerDataset SummaryPhenomenon Mapped: FarmlandUnits: ClassesCell Size: 30 metersSource Type: DiscretePixel Type: Unsigned integerData Coordinate System: USA Contiguous Albers Equal Area Conic USGS version (contiguous US, Puerto Rico, US Virgin Islands), WGS 1984 Albers (Alaska), Hawaii Albers Equal Area Conic (Hawaii), Western Pacific Albers Equal Area Conic (Guam, Marshall Islands, Northern Marianas Islands, Palau, Federated States of Micronesia, and American Samoa)Mosaic Projection: Web Mercator Auxiliary SphereExtent: Contiguous United States, Alaska, Hawaii, Puerto Rico, Guam, US Virgin Islands, Marshall Islands, Northern Marianas Islands, Palau, Federated States of Micronesia, and American SamoaSource: Natural Resources Conservation ServicePublication Date: December 2021ArcGIS Server URL: https://landscape11.arcgis.com/arcgis/Data from the gNATSGO database was used to create the layer for the contiguous United States, Alaska, Puerto Rico, and the U.S. Virgin Islands. The remaining areas were created with the gSSURGO database (Hawaii, Guam, Marshall Islands, Northern Marianas Islands, Palau, Federated States of Micronesia, and American Samoa).This layer is derived from the 30m (contiguous U.S.) and 10m rasters (all other regions) produced by the Natural Resources Conservation Service (NRCS). The value for farmland class is derived from the gSSURGO map unit table field Farm Class (farmlndcl).What can you do with this Layer? This layer is suitable for both visualization and analysis across the ArcGIS system. This layer can be combined with your data and other layers from the ArcGIS Living Atlas of the World in ArcGIS Online and ArcGIS Pro to create powerful web maps that can be used alone or in a story map or other application.Because this layer is part of the ArcGIS Living Atlas of the World it is easy to add to your map:In ArcGIS Online, you can add this layer to a map by selecting Add then Browse Living Atlas Layers. A window will open. Type "farmland" in the search box and browse to the layer. Select the layer then click Add to Map.In ArcGIS Pro, open a map and select Add Data from the Map Tab. Select Data at the top of the drop down menu. The Add Data dialog box will open on the left side of the box, expand Portal if necessary, then select Living Atlas. Type "farmland" in the search box, browse to the layer then click OK.In ArcGIS Pro you can use the built-in raster functions or create your own to create custom extracts of the data. Imagery layers provide fast, powerful inputs to geoprocessing tools, models, or Python scripts in Pro.Online you can filter the layer to show subsets of the data using the filter button and the layer's built-in raster functions.The ArcGIS Living Atlas of the World provides an easy way to explore many other beautiful and authoritative maps on hundreds of topics like this one.

Melting snowpack is a key part of the spring water budget in many parts of the world. Like a natural reservoir, snowpack stores winter precipitation and releases it as runoff over the course of many months. Where summer rains are scarce snowpack provides crucial base flow without which rivers might go dry. Where summer rains are torrential, this exacerbates the flooding and can lead to the loss of lives. This map contains a historical record showing the water stored in snowpack during each month from March 2000 to the present. It is not a map of snow depth, but of snow water equivalent, which is the amount of water that would be produced if all the snow melted. For fresh snow, this can be anywhere from 5% to 20% the depth of the snow, depending on temperature (snow tends to be fluffier at lower temperatures). As the snow settles and melts, it becomes more dense, up to 40% or 50% in the spring. Temperature, albedo (the reflective property of the snow), density, and volume all affect the melting rate of the snowpack. Additionally, melting rate is influenced by wind, relative humidity, air temperature and solar radiation.Dataset SummaryThe GLDAS Snowpack layer is a time-enabled image service that shows average monthly snowpack from 2000 to present, measured in millimeters of snow water equivalent. It is calculated by NASA using the Noah land surface model, run at 0.25 degree spatial resolution using satellite and ground-based observational data from the Global Land Data Assimilation System (GLDAS-1). The model is run with 3-hourly time steps and aggregated into monthly averages. Review the complete list of model inputs, explore the output data (in GRIB format), and see the full Hydrology Catalog for all related data and information!What can you do with this layer?This layer is suitable for both visualization and analysis. It can be used in ArcGIS Online in web maps and applications and can be used in ArcGIS Desktop. Is useful for scientific modeling, but only at global scales. The GLDAS snowpack data is useful for modeling, but only at global scales. Time: This is a time-enabled layer. It shows the total evaporative loss during the map's time extent, or if time animation is disabled, a time range can be set using the layer's multidimensional settings. The map shows the sum of all months in the time extent. Minimum temporal resolution is one month; maximum is one year.Important: You must switch from the cartographic renderer to the analytic renderer in the processing template tab in the layer properties window before using this layer as an input to geoprocessing tools.This layer has query, identify, and export image services available. This layer is part of a larger collection of earth observation maps that you can use to perform a wide variety of mapping and analysis tasks.The Living Atlas of the World provides an easy way to explore the earth observation layers and many other beautiful and authoritative maps on hundreds of topics.Geonet is a good resource for learning more about earth observations layers and the Living Atlas of the World. Follow the Living Atlas on GeoNet.

This map uses an archive of Version 1.0 of the CEJST data as a fully functional GIS layer. See an archive of the latest version of the CEJST tool using Version 2.0 of the data released in December 2024 here.Sea level rise is an ever-looming climate hazard facing the coastal communities of the United States. Communities big and small need easy-to-use tools for climate resilience planning and mitigation strategies. This layer shows coastal census tracts that are at risk from sea level rise and also are considered disadvantaged in one or more categories of burden from the Justice40 Initiative. This layer should be used to identify and prioritize where to implement sea level rise interventions. This layer uses bivariate symbology with the following attributes: Percent of the Tract Area Predicted to be Below Sea Level by 2050 (%)Total Disadvantaged Categories Exceeded (count)These attribute links take you to the original data sources. Preprocessing was needed to prepare many of these inputs for inclusion in our index. The links are provided for reference only.This layer is one of six in a series developed to support local climate resilience planning. Intended as planning tools for policy makers, climate resilience planners, and community members, these layers highlight areas of the community that are most likely to benefit from the resilience intervention it supports. Each layer focuses on one specific sea level rise intervention that is intended to help mitigate against the climate hazard.Each intervention index will help with planning and prioritizing mitigations against a suite of climate change hazards. A climate resilience intervention index can be used to rank census tracts in a particular area as benefitting more or less from that particular intervention.

Each intervention index in this set is envisioned to help with planning and prioritizing mitigations against sea level rise.Layers in the sea level rise hazard series include,Where Would Planting Mangrove Trees Mitigate Coastal Flooding?Where Would Planting Marsh Grass Mitigate Coastal Flooding?Where Would a Buddy Program Improve Coastal Flooding Preparedness?Where Would Coastal Flooding Awareness Increase Resilience?Low-income Households At Risk From Sea Level RiseDisadvantaged Communities At Risk From Sea Level RiseDid you know you can build your own climate resilience index or use ours and customize it? The Customize a climate resilience index Tutorial provides more information on the index and also walks you through steps for taking our index and customizing it to your needs so you can create intervention maps better suited to your location and sourced from your own higher resolution data. For more information about how Esri enriched the census tracts with exposure, demographic, and environmental data to create composite indices called intervention indices, please read this technical reference.This feature layer was created from the Climate Resilience Planning Census Tracts hosted feature layer view and is one of 18 similar intervention layers, all of which can be found in ArcGIS Living Atlas of the World.

Sea level rise is an ever-looming climate hazard facing the coastal communities of the United States. Communities big and small need easy-to-use tools for climate resilience planning and mitigation strategies. This layer shows coastal census tracts that are at risk from sea level rise and also are capable of growing mangrove and have a high percentage of undeveloped area. Mangroves are proved to stabilize shoreline while also reducing the damage of high energy wind and storm swells during severe storm events. This layer should be used to identify and prioritize where to plant mangrove. © 2024 Adobe Stock. All rights reserved.This layer shows the results of a composite index built with the following attributes: Percent of the Tract Area Predicted to be Below Sea Level by 2050 (%)Length of Mangrove Habitat (meters)Percent of the Tract Area that is Undeveloped (%) - Expressed as a percentage of the tract with landcover classified as anything other than “built-up”.These attribute links take you to the original data sources. Preprocessing was needed to prepare many of these inputs for inclusion in our index. The links are provided for reference only.This layer is one of six in a series developed to support local climate resilience planning. Intended as planning tools for policy makers, climate resilience planners, and community members, these layers highlight areas of the community that are most likely to benefit from the resilience intervention it supports. Each layer focuses on one specific sea level rise intervention that is intended to help mitigate against the climate hazard.For more information about how Esri enriched the census tracts with exposure, demographic, and environmental data to create composite indices called intervention indices, please read this technical reference.Each intervention index will help with planning and prioritizing mitigations against a suite of climate change hazards. A climate resilience intervention index can be used to rank census tracts in a particular area as benefitting more or less from that particular intervention.

Each intervention index in this set is envisioned to help with planning and prioritizing mitigations against sea level rise.Layers in the sea level rise hazard series include,Where Would Planting Mangrove Trees Mitigate Coastal Flooding?Where Would Planting Marsh Grass Mitigate Coastal Flooding?Where Would a Buddy Program Improve Coastal Flooding Preparedness?Where Would Coastal Flooding Awareness Increase Resilience?Low-income Households At Risk From Sea Level RiseDisadvantaged Communities At Risk From Sea Level RiseDid you know you can build your own climate resilience index or use ours and customize it? The Customize a climate resilience index Tutorial provides more information on the index and also walks you through steps for taking our index and customizing it to your needs so you can create intervention maps better suited to your location and sourced from your own higher resolution data. For more information about how Esri enriched the census tracts with exposure, demographic, and environmental data to create composite indices called intervention indices, please read this [TODO: Add URL to white paper].This feature layer was created from the Climate Resilience Planning Census Tracts hosted feature layer view and is one of 18 similar intervention layers, all of which can be found in ArcGIS Living Atlas of the World.