This statistics shows the top 20 fastest growing large-metropolitan areas in the United States between July 1st, 2022 and July 1st, 2023. The total population in the Wilmington, North Carolina, metropolitan area increased by 0.05 percent from 2022 to 2023.

This statistic shows the population growth rate of the top twenty largest urban agglomerations in the United States from 2000 to 2030. Between 2025 and 2030, the average annual population growth rate of the New York-Newark agglomeration is projected to be roughly **** percent.

The fastest growing city in Africa is Bujumbura, in Burundi. In 2020, this city had an estimated population of about one million. By 2035, the population of Bujumbura could increase by 123 percent and reach roughly 2.3 million people. Zinder, in Niger, had about half million inhabitants in 2020 and, with a growth rate of 118 percent, is Africa's second fastest growing city. In 2035, Zinder could have over one million residents.

As of 2021, the largest city in whole Africa is Lagos, in Nigeria. Other highly populated cities in Africa are Kinshasa, in Congo, Cairo, and Alexandria, both located in Egypt.

Chart and table of population level and growth rate for the Boise City metro area from 1950 to 2025.

Milan, Bologna, Genoa, Florence, and Turin recorded a population increase between 2022 and 2023. In fact, all the other largest municipalities registered a decrease, most prominently in the south and on the islands. However, Naples is the third-largest Italian municipality, after Rome and Milan.

Cambridge was the fastest growing city in the United Kingdom between 2013 and 2023, with its population increasing by 17.3 percent. Exeter, Milton Keynes, and Peterborough also grew quite fast, with their populations increasing by 15.2 percent, 14.9 percent, and 14 percent, respectively. Largest UK urban areas When looking at cities defined by their urban agglomerations, as of 2023, London had approximately 9.65 million people living there, far larger than any other city in the United Kingdom. The urban agglomeration around the city of Birmingham had a population of approximately 2.67 million, while the urban areas around Manchester and Leeds had populations of 2.79 and 1.92 million respectively. London not only dominated other UK cities in terms of its population, but in its importance to the UK economy. In 2023, the gross domestic product of Greater London was approximately 569 billion British pounds, compared with 101 billion for Greater Manchester, and 85 billion in the West Midlands Metropolitan Area centered around Birmingham. UK population growth In 2023, the overall population of the United Kingdom was estimated to have reached approximately 68.3 million, compared with around 58.9 million in 2000. Since 1970, 2023 was also the year with the highest population growth rate, growing by 0.98 percent, and was at its lowest in 1982 when it shrank by 0.12 percent. Although the UK's birth rate has declined considerably in recent years, immigration to the UK has been high enough to drive population growth in the UK, which has had a positive net migration rate since 1994.

The Urban Growth Area is used to manage future growth around densely populated areas. The urban growth area is the city/town and adjacent unincorporated growth area identified by the cities/towns/county to receive urban growth in the future. Outside of the boundary only rural growth is permissible.

Correction to this data can only be made through a Comprehensive Plan change or at the direction of Thurston County Long Range Planning due to a scrivener's error. The 1990 Washington State Growth Management Act requires the state's fastest growing cities and counties to designate UGAs around each city and town to accommodate the expected population growth over the next 20 years. In Thurston County, UGAs surround Bucoda, Lacey, Olympia, Rainier, Tumwater, Tenino, and Yelm. The current boundaries of the UGAs were established in 1990 and updated via the 2015 adoption of the Thurston County Comprehensive Plan: CHAPTER II - LAND USE II.URBAN GROWTH AREAS History and Purpose of Thurston County's Urban Growth Areas: In 1983, Thurston County, along with the cities of Olympia, Lacey and Tumwater, blazed the trail for growth management in Washington State by signing an interlocal government agreement called the "Urban Growth Management Agreement." That early agreement included an Urban Growth Management Boundary around the three cities to serve as a limit for the cities' expansion for 20 years. The purposes of the county's original growth areas remain relevant today: To provide for higher intensity development around the county's incorporated cities and towns and unincorporated community centers in order to concentrate development in areas where minimal impact to the environment, natural resources and rural atmosphere will occur. To minimize public costs and conserve energy by using services and facilities efficiently through concentration of development and integration of jobs, shopping, services and housing. To phase urban growth and infill with the provision of urban public services and facilities. One of the main effects of an urban growth area is to provide a limit for the extension of urban utilities, especially sewer service. To that end, overall residential density in urban growth areas should be high enough to support urban public services and to provide affordable housing choices. There should be a variety of housing types, with most densities ranging from 4 to 16 dwelling units per acre. Map M-14 identifies the urban growth areas for each city or town in Thurston County. The UGAs must accommodate the urban growth projected over the next 20 years including a reasonable market factor. Policies and actions emphasize the provision of urban land uses and services and include provisions specifically aimed at reducing low density residential sprawl. Joint plans established with each city and town include planning policies for each UGA. Joint plans are contained in separate documents, but are incorporated as part of the Thurston County Comprehensive Plan. Detailed land use designations for all UGAs around cities and towns are provided in the following joint plans (Map M-14 is keyed to the numbering below):Olympia/Thurston County Joint PlanLacey/Thurston County Joint Plan Tumwater/Thurston County Joint PlanYelm/Thurston County Joint PlanRainier/Thurston County Joint PlanTenino/Thurston County Joint PlanBucoda/Thurston County Joint PlanList of Map Correction's (Correction can only be made through a Comprehensive Plan change or at the direction of Thurston County Long Range Planning due to a scrivener's error.)Made on 5 AUG 2014 by KLW. Made on 15 July 2016 by KAH. - Correction of scrivener's error in Tenino UGA Boundary at the Teitge Annexations. This error was due to parcel and city mapping issues. The UGA has been fixed to be consistent with the parcel legal descriptions and the legal description included in the annexation ordinance approved by the City of Tenino, and the annexation approved by the Boundary Review Board.

On May 1, 2014, the California Department of Finance released city, county, and state population estimates updated through the end of year 2013, which includes detailed data on housing production for the San Francisco Bay Region.Key conclusions from the map are summarized below:San Jose and San Francisco are acting as regional powerhouses for infill housing in the urban core.Exurban development is alive and well in the Bay Area, even while housing development has continued to stall in neighboring San Joaquin County.Cities along inner East Bay Bay Area Rapid Transit (BART) corridors produced little-to-no housing in 2013, while the Tri-Valley and eBART corridors saw robust growth.After San Jose and San Francisco, suburban communities like Dublin, Campbell, and Fremont were the top generators of new housing units in 2013.Based on housing production rates (% growth), the fastest-growing cities in the region were all in the eastern fringe of the region or in booming Silicon Valley.

Nigeria has the largest population in Africa. As of 2024, the country counted over 232.6 million individuals, whereas Ethiopia, which ranked second, has around 132 million inhabitants. Egypt registered the largest population in North Africa, reaching nearly 116 million people. In terms of inhabitants per square kilometer, Nigeria only ranks seventh, while Mauritius has the highest population density on the whole African continent. The fastest-growing world region Africa is the second most populous continent in the world, after Asia. Nevertheless, Africa records the highest growth rate worldwide, with figures rising by over two percent every year. In some countries, such as Niger, the Democratic Republic of Congo, and Chad, the population increase peaks at over three percent. With so many births, Africa is also the youngest continent in the world. However, this coincides with a low life expectancy. African cities on the rise The last decades have seen high urbanization rates in Asia, mainly in China and India. However, African cities are currently growing at larger rates. Indeed, most of the fastest-growing cities in the world are located in Sub-Saharan Africa. Gwagwalada, in Nigeria, and Kabinda, in the Democratic Republic of the Congo, ranked first worldwide. By 2035, instead, Africa's fastest-growing cities are forecast to be Bujumbura, in Burundi, and Zinder, Nigeria.

This statistic shows the 20 countries with the highest population growth rate in 2024. In SouthSudan, the population grew by about 4.65 percent compared to the previous year, making it the country with the highest population growth rate in 2024. The global population Today, the global population amounts to around 7 billion people, i.e. the total number of living humans on Earth. More than half of the global population is living in Asia, while one quarter of the global population resides in Africa. High fertility rates in Africa and Asia, a decline in the mortality rates and an increase in the median age of the world population all contribute to the global population growth. Statistics show that the global population is subject to increase by almost 4 billion people by 2100. The global population growth is a direct result of people living longer because of better living conditions and a healthier nutrition. Three out of five of the most populous countries in the world are located in Asia. Ultimately the highest population growth rate is also found there, the country with the highest population growth rate is Syria. This could be due to a low infant mortality rate in Syria or the ever -expanding tourism sector.

This collection contains two datasets: one, data used in TI-City model to predict future urban expansion in Accra, Ghana; and two, residential electricity consumption data used to map intra-urban living standards in Karachi, Pakistan. The TI-City model data are ASCII files of infrastructure and amenities that affect location decisions of households and developers. The residential electricity consumption data consist of average kilowatt hours (kw/h) of electricity consumed per month by ~ 2 million households in Karachi. The electricity consumption data is aggregated into 30m grid cells (count = 193050), with centroids and consumption values provided. The values of the points (centroids), captured under the field "Avg_Avg_Cs", represents the median of average monthly consumption of households within the 30m grid cells.

Our project addresses a critical gap in social research methodology that has important implications for combating urban poverty and promoting sustainable development in low and middle-income countries. Simply put, we're creating a low-cost tool for gathering critical information about urban population dynamics in cities experiencing rapid spatial-demographic and socioeconomic change. Such information is vital to the success of urban planning and development initiatives, as well as disaster relief efforts. By improving the information base of the actors involved in such activities we aim to improve the lives of urban dwellers across the developing world, particularly the poorest and most vulnerable. The key output for the project will be a freely available 'City Sampling Toolkit' that provides detailed instructions and opensource software tools for replicating the approach at various spatial scales.

Our research is motivated by the growing recognition that cities are critical arenas for action in global efforts to tackle poverty and transition towards more environmentally sustainable economic growth. Between now and 2050 the global urban population is projected to grow by over 2 billion, with the overwhelming majority of this growth taking place in low and middle-income countries in Africa and Asia. Developing evidence-based policies for managing this growth is an urgent task. As UN Secretary General Ban Ki Moon has observed: "Cities are increasingly the home of humanity. They are central to climate action, global prosperity, peace and human rights...To transform our world, we must transform its cities."

Unfortunately, even basic data about urban populations are lacking in many of the fastest growing cities of the world. Existing methods for gathering vital information, including censuses and sample surveys, have critical limitations in urban areas experiencing rapid change. And 'big data' approaches are not an adequate substitute for representative population data when it comes to urban planning and policymaking. We will overcome these limitations through a combination of conceptual innovation and creative integration of novel tools and techniques that have been developed for sampling, surveying and estimating the characteristics of populations that are difficult to enumerate. This, in turn, will help us capture the large (and sometimes uniquely vulnerable) 'hidden populations' in cities missed by traditional approaches.

By using freely available satellite imagery, we can get an idea of the current shape of a rapidly changing city and create a 'sampling frame' from which we then identify respondents for our survey. Importantly, and in contrast with previous approaches, we aren't simply going to count official city residents. We are interested in understanding the characteristics of the actually present population, including recent migrants, temporary residents, and those living in informal or illegal settlements, who are often not considered formal residents in official enumeration exercises. In other words, our 'inclusion criterion' for the survey exercise is presence not residence. By adopting this approach, we hope to capture a more accurate picture of city populations. We will also limit the length of our survey questionnaire to maximise responses and then use novel statistical techniques to reconstruct a rich statistical portrait that reflects a wide range of demographic and socioeconomic information.

We will pilot our methodology in a city in Pakistan, which recently completed a national census exercise that has generated some controversy with regard to the accuracy of urban population counts. To our knowledge this would be the first project ever to pilot and validate a new sampling and survey methodology at the city scale in a developing country.

Ultra-high-speed Broadband Internet Market Outlook

The global market size for ultra-high-speed broadband internet was valued at approximately USD 450 billion in 2023 and is projected to reach USD 980 billion by 2032, growing at a compound annual growth rate (CAGR) of 9.1% during the forecast period. This growth is driven by increasing demand for high-speed internet connectivity across various sectors, fueled by advancements in technology and rising data consumption globally.

One of the primary growth factors of the ultra-high-speed broadband internet market is the proliferation of smart devices and the Internet of Things (IoT). With an increasing number of connected devices in households and enterprises, there is a substantial demand for faster and more reliable internet connections. The advent of smart homes, autonomous vehicles, and smart cities is further propelling this demand. Smart devices require continuous and high-quality internet connectivity to function optimally, making ultra-high-speed broadband essential for modern digital lifestyles.

Another significant driver is the shift towards remote work and digital learning, which has been accelerated by the COVID-19 pandemic. As employees and students rely on video conferencing, cloud-based applications, and online collaboration tools, the need for ultra-high-speed broadband has soared. Enterprises are increasingly investing in robust internet infrastructure to support their remote workforce, while educational institutions are enhancing their digital capabilities to facilitate online learning. This trend is expected to continue, contributing significantly to market growth.

The rapid expansion of streaming services and online entertainment also plays a crucial role in the market's growth. Services like Netflix, Amazon Prime, and Disney+ require high-speed internet to deliver high-definition content seamlessly. The gaming industry, especially with the rise of cloud gaming platforms, demands ultra-low latency and high-bandwidth internet connections. As consumer preferences shift towards online and on-demand content, the necessity for ultra-high-speed broadband becomes more pronounced.

From a regional perspective, North America and Europe currently lead the market due to their advanced infrastructure and high internet penetration rates. However, the Asia Pacific region is anticipated to witness the fastest growth during the forecast period. Countries like China, India, and Japan are investing heavily in expanding their broadband infrastructure to support their burgeoning digital economies. The demand for ultra-high-speed broadband in these regions is driven by urbanization, increasing smartphone usage, and government initiatives to bridge the digital divide.

Technology Analysis

Ultra-high-speed broadband internet technology encompasses several types, including fiber optic, DSL, cable, satellite, and others. Among these, fiber optic technology holds a significant share due to its superior speed and reliability. Fiber optic cables, made of thin strands of glass or plastic, transmit data as light signals, allowing for incredibly high-speed data transfer. This technology is particularly favored in urban areas and developed regions where infrastructure investment is feasible. The deployment of fiber optic networks is seen as a long-term investment in the digital infrastructure, providing future-proof solutions to meet growing data demands.

DSL (Digital Subscriber Line) technology, while older, continues to be relevant, especially in regions where laying new fiber optic cables is not economically viable. DSL uses existing telephone lines to deliver high-speed internet, making it a cost-effective solution for many households and small businesses. However, it is generally slower and less reliable compared to fiber optics. Cable broadband, which uses the same coaxial cables as cable television, offers faster speeds than DSL and is widely used in suburban areas. This technology is often seen as a middle-ground solution, providing substantial speed improvements without the high costs associated with fiber optic deployment.

Satellite broadband is another critical technology, particularly for remote and rural areas where terrestrial internet infrastructure is lacking. Satellite internet provides high-speed connectivity by communicating with orbiting satellites, making it a viable option for areas unders

Anti-Graffiti Films Market Outlook

The global anti-graffiti films market size was valued at approximately USD 345 million in 2023 and is expected to reach around USD 595 million by 2032, growing at a CAGR of 6.5% during the forecast period. This growth is driven by the increasing demand for protective solutions against vandalism in urban areas, alongside technological advancements in film materials that offer enhanced durability and cost-effectiveness. Furthermore, the rising awareness about maintenance cost savings and the aesthetic preservation provided by these films is propelling market expansion.

One of the primary growth factors in the anti-graffiti films market is the increasing urbanization and industrialization across the globe, which has led to a rise in public and commercial infrastructure. As cities grow, so does the problem of graffiti, necessitating effective and affordable solutions to protect public and private properties. Anti-graffiti films provide an efficient way to maintain the aesthetic appeal of structures and vehicles without recurring maintenance costs, making them an attractive choice for municipalities, businesses, and vehicle owners. Additionally, these films are environmentally friendly, offering a sustainable solution to graffiti problems, which aligns with the global push towards green technologies.

Technological advancements have also played a significant role in driving market growth. Manufacturers are continually innovating to produce films with superior adhesive qualities and enhanced resistance to chemical and physical abrasions. The development of new materials that offer better transparency and less discoloration over time is making these films more appealing to end-users. Advanced anti-graffiti films can withstand harsh weather conditions, making them suitable for various climates, which expands their applicability across different regions. The integration of smart technology into these films, such as self-healing properties, is another emerging trend that is expected to fuel market growth.

The cost-effectiveness of anti-graffiti films compared to traditional methods of graffiti removal and surface repainting is another critical growth driver. The installation of these films significantly reduces maintenance costs over time, as they can be easily replaced without damaging the underlying surfaces. This financial benefit is particularly appealing to budget-conscious municipalities and businesses, leading to increased adoption. Moreover, the films contribute to extending the lifespan of urban infrastructure and vehicles by protecting them from daily wear and tear, thereby supporting sustainable city planning efforts.

Regionally, North America holds a significant share of the anti-graffiti films market due to the high prevalence of graffiti and vandalism in urban areas. Additionally, the region has a well-established infrastructure for distribution and installation services, which supports market growth. Europe follows closely, driven by stringent regulations on building aesthetics and maintenance, especially in historical cities. The Asia Pacific region is anticipated to witness the fastest growth during the forecast period, attributed to rapid urbanization and increasing infrastructure development projects in countries like China and India. In contrast, the Middle East & Africa and Latin America represent emerging markets with potential for future growth as awareness and economic conditions improve.

Material Type Analysis

The material type segment of the anti-graffiti films market is primarily bifurcated into polyethylene terephthalate (PET), polycarbonate, and others. Polyethylene terephthalate is the most widely used material owing to its cost-effectiveness and superior chemical resistance properties. PET films are transparent, allowing them to maintain the aesthetic appeal of surfaces while providing robust protection against graffiti. Their recyclability and environmental benefits add to their popularity among environmentally conscious consumers and businesses. As such, PET films are expected to continue leading the market, supported by ongoing advancements in production technologies that enhance their performance characteristics.

Polycarbonate films, while more expensive than PET, offer superior durability and impact resistance, making them suitable for high-demand applications where vandalism is frequent and severe. These films are often used in areas prone to harsh conditions or where safety standards are stringent, such as in transportation and public infrastructure. The ability of polycarbonate films to withstand s

Intelligent Road System (IRS) Market Outlook

The Intelligent Road System (IRS) market is set to revolutionize global transportation infrastructure, with a market size anticipated to reach USD 34.8 billion by 2032, rising from USD 15.2 billion in 2023, exhibiting a robust CAGR of 9.2% during the forecast period. The adoption of IRS is driven by the increasing need for real-time traffic management, enhanced road safety measures, and efficient freight management. As urbanization accelerates, the demand for smart solutions to address congested transportation networks and reduce environmental impact is becoming critical, thus fueling the growth of IRS globally.

The first major growth factor for the IRS market is the escalating demand for real-time traffic management systems. With urban populations booming worldwide, cities face significant challenges in managing traffic congestion, leading to increased travel times and higher pollution levels. Intelligent Road Systems provide solutions like adaptive traffic signal control, incident detection, and traffic monitoring, which utilize big data and IoT technologies to optimize traffic flow and enhance commuter experience. This efficiency not only helps in reducing congestion but also contributes to economic savings by cutting down fuel usage and time wastage. Governments and municipalities are increasingly investing in these systems to improve urban living standards and support economic growth.

Another key driver is the emphasis on road safety and accident prevention. Governments across the globe are implementing stringent safety regulations and policies to minimize road accidents and fatalities. IRS technologies such as automated speed enforcement, vehicle-to-infrastructure (V2I) communication, and smart traffic signals are pivotal in detecting hazardous situations and preventing accidents. These systems offer advanced warnings, automate emergency responses, and ensure compliance with traffic rules. As the automotive industry continues to advance in autonomous vehicle technologies, the integration of IRS becomes indispensable in creating a seamless and safe driving environment.

Furthermore, environmental concerns and sustainability goals are propelling the IRS market forward. Cities are under pressure to reduce their carbon footprints, and intelligent road systems present viable solutions to this end. IRS can effectively reduce emissions by optimizing traffic flow and minimizing idle times at intersections. Eco-friendly measures like monitoring air quality and facilitating electric vehicle integration are becoming integral to IRS deployment. As cities worldwide commit to greener policies and invest in sustainable infrastructure, the IRS market is poised for significant growth, contributing to cleaner and more eco-friendly urban environments.

Regionally, the market's expansion is bolstered by significant investments in developed regions like North America and Europe, which have been early adopters of IRS technologies. However, Asia Pacific is anticipated to be the fastest-growing region due to rapid urbanization and increasing government initiatives to develop smart cities. Countries like China, India, and Japan are heavily investing in smart transportation infrastructure to cope with the burgeoning urban population and the associated traffic challenges. The Middle East & Africa, although currently a smaller market, is showing promising potential with several smart city projects underway, particularly in the Gulf region.

Component Analysis

The Intelligent Road System market encompasses three primary components: hardware, software, and services. Hardware forms the backbone of IRS, including a wide array of sensors, cameras, traffic signals, and communication devices that are crucial for collecting and relaying data in real-time. These components are necessary for implementing the physical aspects of intelligent transportation systems. The ongoing advancements in sensor technology and reductions in costs are making these systems more accessible and reliable, thus driving the market growth. The demand for high-precision sensors and robust communication devices is on the rise, particularly with the integration of IoT and 5G technologies, which promise enhanced connectivity and real-time data processing capabilities.

Software is another critical component of IRS, responsible for data processing, analytics, and system management. The software solutions integrated into IRS are designed to analyze vast amounts of data collected from various hardware components to provide actionable insights and facilitate decision-making. A

This statistic shows the ten cities with the fastest growing business base in the United Kingdom (UK) from 2016 to 2017. The number of businesses located in Warrington increased by **** percent during this period, with Aberdeen and Slough in second and third place respectively.

Skid Mounted Unit Substations Market Outlook

The global skid mounted unit substations market size was valued at approximately $3.5 billion in 2023 and is expected to reach around $6.4 billion by 2032, growing at a compound annual growth rate (CAGR) of 7.2% during the forecast period. This growth can be attributed to the increasing demand for reliable and efficient power distribution systems across various industries. The rising investments in infrastructure development and industrialization projects, particularly in emerging economies, are driving the expansion of the market.

One of the primary growth factors for the skid mounted unit substations market is the increasing need for compact and efficient power solutions. Unlike traditional substations, skid mounted unit substations are pre-assembled and tested before being transported to the site, which significantly reduces the installation time and cost. This feature is particularly beneficial for industries and utilities that require quick deployment of power solutions to meet growing electricity demand. Additionally, the modular design of these substations allows for easy scalability and flexibility, making them suitable for a wide range of applications.

Another significant factor contributing to market growth is the rising focus on renewable energy sources. As the world transitions towards cleaner and more sustainable energy solutions, there is an increasing need for substations that can efficiently integrate renewable energy sources into the grid. Skid mounted unit substations offer an ideal solution for this purpose, as they can be easily deployed in remote locations and harsh environments where traditional substations may not be feasible. Moreover, their robust design and ability to withstand extreme weather conditions make them a preferred choice for renewable energy projects.

The growing urbanization and industrialization in developing countries are also driving the demand for skid mounted unit substations. Rapid urbanization is leading to the expansion of cities and the development of new commercial and residential areas, which in turn is increasing the need for reliable power distribution systems. Similarly, the industrial sector is witnessing significant growth, with new manufacturing plants and factories being established, further boosting the demand for skid mounted unit substations. Additionally, government initiatives and policies aimed at improving the power infrastructure in these regions are expected to create lucrative opportunities for market players.

Regionally, the Asia Pacific region is expected to be the fastest-growing market for skid mounted unit substations during the forecast period. The region's rapid economic growth, coupled with increasing investments in infrastructure development and industrial projects, is driving the demand for efficient power distribution systems. Countries such as China, India, and Japan are witnessing significant growth in their power sectors, which is expected to boost the adoption of skid mounted unit substations. Additionally, the region's focus on renewable energy projects and the need for reliable power solutions in remote and rural areas are further contributing to market growth.

Type Analysis

In the skid mounted unit substations market, the type segment is broadly categorized into oil-immersed and dry-type substations. Oil-immersed skid mounted unit substations are widely used due to their ability to handle higher loads and their longer service life compared to dry-type substations. These substations use oil as an insulating and cooling medium, which provides better thermal performance and enhances the overall efficiency of the substation. Consequently, oil-immersed substations are preferred in heavy industrial applications where reliability and performance are critical.

On the other hand, dry-type skid mounted unit substations are gaining popularity due to their lower maintenance requirements and environmental benefits. Unlike oil-immersed substations, dry-type units do not use oil, eliminating the risk of oil leaks and environmental contamination. This makes them an ideal choice for applications in environmentally sensitive areas and indoor installations where fire safety is a concern. Moreover, advancements in dry-type insulation technologies are improving the performance and durability of these substations, making them a viable alternative to traditional oil-immersed units.

Both types of skid mounted unit substations have their unique advantages and are selected based on specific application requirem

Nigeria has the largest population in Africa. As of 2025, the country counted over 237.5 million individuals, whereas Ethiopia, which ranked second, has around 135.5 million inhabitants. Egypt registered the largest population in North Africa, reaching nearly 118.4 million people. In terms of inhabitants per square kilometer, Nigeria only ranked seventh, while Mauritius had the highest population density on the whole African continent in 2023. The fastest-growing world region Africa is the second most populous continent in the world, after Asia. Nevertheless, Africa records the highest growth rate worldwide, with figures rising by over two percent every year. In some countries, such as Niger, the Democratic Republic of Congo, and Chad, the population increase peaks at over three percent. With so many births, Africa is also the youngest continent in the world. However, this coincides with a low life expectancy. African cities on the rise The last decades have seen high urbanization rates in Asia, mainly in China and India. However, African cities are currently growing at larger rates. Indeed, most of the fastest-growing cities in the world are located in Sub-Saharan Africa. Gwagwalada, in Nigeria, and Kabinda, in the Democratic Republic of the Congo, ranked first worldwide. By 2035, instead, Africa's fastest-growing cities are forecast to be Bujumbura, in Burundi, and Zinder, Nigeria.

Clothes-Hanger Trolleys Market Outlook

The global clothes-hanger trolleys market size is projected to rise significantly from its 2023 valuation of approximately USD 2.5 billion to an estimated USD 4.8 billion by 2032, at a compound annual growth rate (CAGR) of 7.2%. This notable growth is driven by the increasing demand for efficient and space-saving storage solutions in both residential and commercial settings. The burgeoning urban population and the rise in living standards have fueled the need for innovative home organization products. Clothes-hanger trolleys offer convenience and flexibility, making them a popular choice in modern households and businesses alike.

One of the primary growth factors influencing the clothes-hanger trolleys market is the changing lifestyle and preferences of consumers. With the rapid urbanization and shrinking living spaces, especially in metropolitan areas, there is a growing need for compact and multifunctional furniture. Clothes-hanger trolleys, which combine the utility of a clothes rack with the mobility of a trolley, are gaining traction as they fit perfectly into small apartments and homes. Additionally, the rise of the gig economy and home-based businesses has led to an increased demand for portable and efficient storage solutions, further propelling the growth of this market.

Another significant growth factor is the expansion of the commercial and industrial sectors. As retail spaces, hotels, and hospitality services continue to expand, the need for practical and space-efficient storage solutions has become more pronounced. Clothes-hanger trolleys are extensively used in these settings to manage inventory and organize clothing efficiently. The hospitality industry, in particular, has shown a growing preference for such trolleys owing to their ease of use and capacity to hold multiple garments without consuming too much space. Moreover, the industrial demand is fueled by the need for organized storage and transportation of garments in production and manufacturing units.

The increasing focus on sustainability and eco-friendly materials is also contributing to the growth of the clothes-hanger trolleys market. Manufacturers are increasingly using sustainable materials such as recycled metal and wood to produce trolleys. This trend is being driven by growing consumer awareness about environmental issues and the demand for sustainable products. Additionally, innovations in design and functionality, such as foldable and adjustable clothes-hanger trolleys, are attracting consumers who seek versatility and adaptability in their home and office furnishings. These innovations not only cater to consumer demand but also open new avenues for market growth.

Regionally, the clothes-hanger trolleys market is witnessing varied growth patterns. In Asia Pacific, the market is buoyed by rapid urbanization and the expanding middle-class population, making it the fastest-growing region with a remarkable CAGR. North America and Europe, although mature markets, continue to grow steadily due to the demand for premium and high-quality products. Meanwhile, Latin America and the Middle East & Africa are emerging as potential markets, driven by increasing urbanization and rising disposable incomes, which are contributing to the growing demand for efficient storage solutions.

The rise of Foldable Hanger Sales is another noteworthy trend impacting the market dynamics. These innovative hangers offer unparalleled convenience, particularly for consumers who are constantly on the move or have limited storage space. Their compact design allows them to be easily stored in small spaces or packed for travel, making them an ideal choice for urban dwellers and frequent travelers. As consumers increasingly prioritize versatility and efficiency in their home organization solutions, foldable hangers are gaining popularity. This trend is also supported by the growing emphasis on minimalistic living, where consumers seek to maximize their space without compromising on functionality. As a result, the foldable hanger segment is expected to witness significant growth, contributing to the overall expansion of the clothes-hanger trolleys market.

Product Type Analysis

The segmentation of the clothes-hanger trolleys market by product type into foldable and non-foldable variants offers keen insights into consumer preferences and demands. Foldable clothes-hanger trolleys are particularly appealing for their space-saving attributes, making them ide

GPS Receiver Market Outlook

The global GPS receiver market size was valued at approximately USD 3.6 billion in 2023 and is projected to reach USD 5.8 billion by 2032, growing at a compound annual growth rate (CAGR) of 5.5% during the forecast period. The growth of this market is fueled by the increasing demand for precise and real-time geolocation data across various industries such as automotive, defense, and agriculture. The integration of advanced technologies like IoT and AI into GPS systems further enhances their functionality, driving the market expansion.

One of the primary growth factors for the GPS receiver market is the burgeoning use of GPS technology in the automotive sector. With the rise in demand for connected and autonomous vehicles, the need for accurate and reliable navigation solutions has become paramount. GPS receivers are crucial in providing real-time location data and enabling features such as route optimization and driver assistance systems. Additionally, the automotive industry's shift toward electric vehicles (EVs) has further bolstered the demand for advanced GPS systems capable of efficient navigation and route planning, thus contributing to the market's growth.

The agriculture sector is another significant contributor to the growth of the GPS receiver market. The adoption of precision farming techniques has necessitated the use of GPS technology to improve crop yield and reduce costs. GPS receivers enable farmers to monitor field conditions, manage resources efficiently, and perform tasks such as planting, fertilizing, and harvesting with high accuracy. Moreover, the increasing global population and the subsequent demand for food have prompted governments and organizations to invest in smart agriculture solutions, thereby driving the demand for GPS receivers in this sector.

The advent of smart cities and the increasing application of GPS technology in urban planning and management have also propelled the growth of the GPS receiver market. GPS receivers play a vital role in traffic management systems, public transportation, and emergency response services, providing real-time location data essential for efficient urban operations. As cities around the world continue to evolve into smart cities with connected infrastructure, the demand for GPS receivers is expected to rise significantly.

Regionally, North America dominates the GPS receiver market, owing to the presence of major technology companies and the early adoption of advanced technologies in sectors such as automotive and defense. The region's robust infrastructure and high investment in research and development further support market growth. However, the Asia Pacific region is anticipated to witness the fastest growth during the forecast period, driven by rapid industrialization, urbanization, and the increasing adoption of GPS technology in countries like China and India. The growing focus on smart city initiatives and advancements in the automotive sector in this region are expected to contribute to the market's expansion.

Type Analysis

The GPS receiver market is segmented by type into differential grade, survey grade, and mapping grade receivers, each catering to specific industry needs. Differential grade receivers are primarily used in applications requiring high precision and accuracy, such as surveying and mapping. These receivers utilize differential correction techniques to enhance the accuracy of GPS data, making them suitable for civil engineering, construction, and agricultural applications. The demand for differential grade GPS receivers is expected to grow steadily as industries increasingly prioritize precision in their operations.

Survey grade GPS receivers are designed to meet the stringent accuracy requirements of professional surveyors and geospatial professionals. These receivers are equipped with advanced features such as multi-frequency support and high-quality antennas, enabling them to deliver centimeter-level accuracy. The growing infrastructure development projects and the increasing emphasis on accurate land surveying are driving the demand for survey grade GPS receivers. Moreover, the integration of GNSS (Global Navigation Satellite System) technology in survey grade receivers enhances their functionality, further boosting their adoption across various sectors.

Mapping grade GPS receivers are used in applications where sub-meter accuracy is sufficient, such as environmental monitoring, asset management, and utility mapping. These receivers offer a cost-effective solution for organizations t

In 2020, the population of the United Kingdom was estimated to have grown by approximately 0.4 percent, with the population growing fastest in the South West and East Midlands, which reported growth rates of 0.6 percent in this year. By contrast, growth in Northern Ireland and Scotland was below the UK average, at just 0.1 percent and zero percent, respectively. Four countries of the UK Within the UK, South East England had the highest population of the regions that comprise the United Kingdom, at more than 9.37 million people. In terms of the four countries of the UK, England had by far the highest population at over 57.7 million people, compared with Scotland (5.5 million) Wales (3.13 million) and Northern Ireland (1.9 million people) which have comparatively smaller populations. Largest cities in the UK With 8.9 million people living there, London is one of the most heavily population regions of the UK, and by far the largest city. Other large cities in the UK include West Midlands urban area, centered around the city of Birmingham at 2.95 million people, along with Greater Manchester at 2.91 million, with these two cities generally considered as the main contenders for being the country's second-city.