The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth?s surface using the State Plane coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

This dataset comes from the FEMA S_Fld_Haz_Ar table. The S_Fld_Haz_Ar table contains information about the flood hazards within the flood risk project area. A spatial file with location information also corresponds with this data table. These zones are used by FEMA to designate the SFHA and for insurance rating purposes. These data are the regulatory flood zones designated by FEMA. A spatial file with location information also corresponds with this data table.This information is needed for the following tables in the FIS report: Flooding Sources Included in this FIS report, and Summary of Hydrologic and Hydraulic Analyses.The spatial elements representing the flood zones are polygons. The entire area of the jurisdiction(s) mapped by the FIRM should have a corresponding flood zone polygon. There is one polygon for each contiguous flood zone designated.FEMA Regulatory Floodway are flood zone polygons marked as a regulatory floodway.FEMA 100 year are flood zone polygons where there is a 1% Annual Chance, also known as the 100 year.FEMA 500 year are flood zone polygons where there is a 0.2% Annual Chance, also known as the 500 year.This map is not intended for insurance rating purposes and is for information only. This map is a representation and approximation of the relative location of geographic information, land marks and physical addresses. The map may not be 100% accurate in locating your address. The floodplains shown on this mapping tool are those delineated on the Federal Emergency Management Agency’s (FEMA) Digital Flood Insurance Rate Map (DFIRM or floodplain map) for Montgomery County. This map is not an official FEMA Digital Flood Insurance Rate Map. The effective DFIRMs are produced, maintained, and published by FEMA and not by Montgomery County. Official determinations are provided by FEMA.

This map represents Flood Insurance Rate Map (FIRM) data important for floodplain management, mitigation, and insurance activities for the National Flood Insurance Program (NFIP). The National Flood Hazard Layer (NFHL) data present the flood risk information depicted on the FIRM in a digital format suitable for use in electronic mapping applications. The NFHL database is a subset of the information created for the Flood Insurance Studies (FIS) and serves as a means to archive a portion of the information collected during the FIS. The NFHL data incorporates Digital Flood Insurance Rate Map (DFIRM) databases published by Federal Emergency Management Agency (FEMA). The 100-year flood is referred to as the 1% annual exceedance probability flood, since it is a flood that has a 1% chance of being equaled or exceeded in any single year. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The 1% annual chance (base flood) is the flood that has a 1% chance of being equaled or exceeded in any year. The Special Flood Hazard area is the area subject to flooding by the 1% annual chance flood. Areas of Special Flood Hazard include Zones A, AE, AH, AO, AR, A99, D, V, VE, and X. These flood zones are explained below and reflects the severity or type of flooding in the area. A - Zone A is the flood insurance rate zone that corresponds to the 1-percent annual chance floodplains that are determined in the Flood Insurance Study by approximate methods of analysis. Because detailed hydraulic analyses are not performed for such areas, no Base Flood Elevations or depths are shown within this zone. Mandatory flood insurance purchase requirements apply. AE and A1-A30 - Zones AE and A1-A30 are the flood insurance rate zones that correspond to the 1-percent annual chance floodplains that are determined in the Flood Insurance Study by detailed methods of analysis. In most instances, Base Flood Elevations derived from the detailed hydraulic analyses are shown at selected intervals within this zone. Mandatory flood insurance purchase requirements apply. AH - Zone AH is the flood insurance rate zone that corresponds to the areas of 1-percent annual chance shallow flooding with a constant water-surface elevation (usually areas of ponding) where average depths are between 1 and 3 feet. The Base Flood Elevations derived from the detailed hydraulic analyses are shown at selected intervals within this zone. Mandatory flood insurance purchase requirements apply. AO - Zone AO is the flood insurance rate zone that corresponds to the areas of 1-percent shallow flooding (usually sheet flow on sloping terrain) where average depths are between 1 and 3 feet. Average flood depths derived from the detailed hydraulic analyses are shown within this zone. In addition, alluvial fan flood hazards are shown as Zone AO on the Flood Insurance Rate Map. Mandatory flood insurance purchase requirements apply. AR - Zone AR is the flood insurance rate zone used to depict areas protected from flood hazards by flood control structures, such as a levee, that are being restored. FEMA will consider using the Zone AR designation for a community if the flood protection system has been deemed restorable by a Federal agency in consultation with a local project sponsor; a minimum level of flood protection is still provided to the community by the system; and restoration of the flood protection system is scheduled to begin within a designated time period and in accordance with a progress plan negotiated between the community and FEMA. Mandatory purchase requirements for flood insurance will apply in Zone AR, but the rate will not exceed the rate for an unnumbered Zone A if the structure is built in compliance with Zone AR floodplain management regulations. A99 - Zone A99 is the flood insurance rate zone that corresponds to areas within the 1-percent annual chance floodplain that will be protected by a Federal flood protection system where construction has reached specified statutory milestones. No Base Flood Elevations or depths are shown within this zone. Mandatory flood insurance purchase requirements apply. D - Zone D designation is used for areas where there are possible but undetermined flood hazards. In areas designated as Zone D, no analysis of flood hazards has been conducted. Mandatory flood insurance purchase requirements do not apply, but coverage is available. The flood insurance rates for properties in Zone D are commensurate with the uncertainty of the flood risk. V - Zone V is the flood insurance rate zone that corresponds to areas within the 1-percent annual chance coastal floodplains that have additional hazards associated with storm waves. Because approximate hydraulic analyses are performed for such areas, no Base Flood Elevations are shown within this zone. Mandatory flood insurance purchase requirements apply. VE - Zone VE is the flood insurance rate zone that corresponds to areas within the 1-percent annual chance coastal floodplain that have additional hazards associated with storm waves. Base Flood Elevations derived from the detailed hydraulic analyses are shown at selected intervals within this zone. Mandatory flood insurance purchase requirements apply. X - Zone X is the flood insurance rate zones that correspond to areas outside the 1-percent annual chance floodplain – Areas protected from the 1-percent annual chance flood by levees. No Base Flood Elevations or depths are shown within this zone. Insurance purchase is not required in these zones. More information about the flood zones can be found here. The NFHL data are derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps, flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data where available. The NFHL data is available at State level. The data is updated on monthly basis and FEMA is in the process of mapping all the flood zones and so some counties do not have complete data. For better visualization, it’s recommended to display the service with 50% transparency. The map service has a county layer that helps differentiate between the counties that have flood data available and those that do not. The flood data is scale dependent and is set to show from 1:3,000,000. This data is as of March 2011.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:24,000.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the Transverse Mercator projection and State Plane coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:24,000.

The National Flood Hazard Layer (NFHL) data incorporates all Digital Flood Insurance Rate Map(DFIRM) databases published by FEMA, and any Letters Of Map Revision (LOMRs) that have been issued against those databases since their publication date. The DFIRM Database is the digital, geospatial version of the flood hazard information shown on the published paper Flood Insurance Rate Maps(FIRMs). The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The NFHL data are derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The specifications for the horizontal control of DFIRM data are consistent with those required for mapping at a scale of 1:12,000. The NFHL data contain layers in the Standard DFIRM datasets except for S_Label_Pt and S_Label_Ld. The NFHL is available as State or US Territory data sets. Each State or Territory data set consists of all DFIRMs and corresponding LOMRs available on the publication date of the data set.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA).

Flood zones are geographic areas that the Federal Emergency Management Agency (FEMA) has defined according to varying levels of flood risk. These zones are depicted on a community's Flood Insurance Rate Map (FIRM) or Flood Hazard Boundary Map. Each zone reflects the severity or type of flooding in the area. For more information click here.

This dataset contains the scanned, paper flood insurance rate maps (FIRMs) developed by FEMA and available from the Mapping Service Center.

The Federal Emergency Management Agency (FEMA) produces Flood Insurance Rate maps and identifies Special Flood Hazard Areas as part of the National Flood Insurance Program's floodplain management. Special Flood Hazard Areas have regulations that include the mandatory purchase of flood insurance.Dataset SummaryPhenomenon Mapped: Flood Hazard AreasCoordinate System: Web Mercator Auxiliary SphereExtent: Contiguous United States, Alaska, Hawaii, Puerto Rico, Guam, US Virgin Islands, Northern Marianas Islands and American Samoa.Visible Scale: The layer is limited to scales of 1:1,000,000 and larger. Use the USA Flood Hazard Areas imagery layer for smaller scales.Source: Federal Emergency Management AgencyPublication Date: October 5, 2022This layer is derived from the October 5, 2022 version of the National Flood Hazard Layer feature class S_Fld_Haz_Ar. The data were aggregated into eight classes to produce the Esri Symbology field based on symbology provided by FEMA. All other layer attributes are derived from the National Flood Hazard Layer.The layer was projected to Web Mercator Auxiliary Sphere, then the repair geometry geoprocessing tool was run on it. Its resolution was set to 0.0001 meter.To improve performance Flood Zone values "Area Not Included", "Open Water", "D", "NP", and No Data were removed from the layer. Areas with Flood Zone value "X" subtype "Area of Minimal Flood Hazard" were also removed. An imagery layer created from this dataset provides access to the full set of records in the National Flood Hazard Layer.A web map featuring this layer is available for you to use. Mississippi Emergency Management Agency◄ ◄ Preparing for Tomorrow's Disasters Today ► ►MEMA ArcGIS Home ● GIS Awareness Center ● GIS Weather Center ● GIS Hurricane CenterThe mission of the Mississippi Emergency Management Agency is to safeguard Mississippi and its citizens by fostering a culture of preparedness, executing timely responses during disasters, and quickly restoring quality of life post-event.

The Federal Emergency Management Agency (FEMA) partners with Tribal nations, States, and communities through the Risk Mapping, Assessment, and Planning (Risk MAP) program to identify flood hazards, assess flood risks, and provide accurate data to guide stakeholders in taking effective mitigation actions that result in safer and more resilient communities. This data is incorporated into flood maps, known as Flood Insurance Rate Maps (FIRMs), that support the National Flood Insurance Program (NFIP) and provide the basis for community floodplain management regulations and flood insurance requirements. Flood hazards are dynamic and can change frequently because of a variety of factors, including weather patterns, erosion, and new development. FEMA, through the Risk MAP program, works with communities to collect new or updated flood hazard data and periodically updates flood maps to reflect these changes.Source: FEMAEffective Date: 7/31/2024Update Cycle: When ProvidedFEMA Flood Map Information

This dataset contains the scanned, paper flood insurance rate maps (FIRMs) developed by FEMA and available from the Mapping Service Center.

The S_FIRM_Pan table contains information about the FIRM panel area. A spatial file with location information also corresponds with this data table. The spatial entities representing FIRM panels are polygons. The polygon for the FIRM panel corresponds to the panel neatlines. Panel boundaries are generally derived from USGS DOQQ boundaries. As a result, the panels are generally rectangular. In situations where a portion of a panel lies outside the jurisdiction being mapped, the user must refer to the S_Pol_Ar table to determine the portion of the panel area where the FIRM Database shows the effective flood hazard data for the mapped jurisdiction. This information is needed for the FIRM Panel Index and the following tables in the FIS report: Listing of NFIP Jurisdictions, Levees, Incorporated Letters of Map Change, and Coastal Barrier Resources System Information.

The spatial entities representing FIRM panels are polygons. The polygon for the FIRM panel corresponds to the panel neatlines. Panel boundaries are generally derived from USGS DOQQ boundaries. As a result, the panels are generally rectangular. FIRM panels must not overlap or have gaps within a study. In situations where a portion of a panel lies outside the jurisdiction being mapped, the user must refer to the S_Pol_Ar table to determine the portion of the panel area where the FIRM Database shows the effective flood hazard data for the mapped jurisdiction.

This information is needed for the FIRM Panel Index and the following tables in the FIS report: Listing of NFIP Jurisdictions, Levees, Incorporated Letters of Map Change, and Coastal Barrier Resources System Information.

This layer is a component of Region Preliminary Data.

Normally, any FIRM that has associated flood profiles has cross sections. The S_XS table contains information about cross section lines. These lines usually represent the locations of channel surveys performed for input into the hydraulic model used to calculate flood elevations. Sometimes cross sections are interpolated between surveyed cross sections using high accuracy elevation data. Depending on the zone designation (Zone AE, Zone A, etc.), these locations may be shown on Flood Profiles in the FIS report and can be used to cross reference the Flood Profiles to the planimetric depiction of the flood hazards. This information is used in the Floodway Data Tables in the FIS report, as well as on the FIRM panels.

This layer is a component of Region Preliminary Data.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). In addition to the preceding, required text, the Abstract should also describe the projection and coordinate system as well as a general statement about horizontal accuracy.

Most current Federal Emergency Management Agency (FEMA) Flood Hazard Layer. This dataset represents the current effective flood data for Hamilton County. It is a compilation of effective Flood Insurance Rate Map (FIRM) databases and Letters of Map Revision (LOMRs). For more information, visit FEMA's Map Service Center (MSC): https://msc.fema.gov/portal/home

The profile baseline shows the path of flood flows on the FIRM and is an accurate representation of the distance between cross sections, structures, nodes, or grids in the hydraulic model. The profile baseline is used for replicating the stationing and water-surface elevations found in the FIS report profiles, but in GIS format. This information is used in the following tables within the FIS report: Flooding Sources Included in this FIS report, Principal Flood Problems, Summary of Hydrologic and Hydraulic Analyses, Summary of Topographic Elevation Data Used in Mapping, the Stream-by_Stream Vertical Datum Conversion, and Summary of Contracted Studies Included in this FIS Report.

This layer is a component of Region Preliminary Data.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the State Plane projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:24,000.