In the United States, the federal government manages approximately 28% of the land in the United States. Most federal lands are west of the Mississippi River, where almost half of the land by area is managed by the federal government. Federal lands include 193 million acres managed by the US Forest Service in 154 National Forests and 20 National Grasslands, Bureau of Land Management lands that cover 247 million acres in Alaska and the Western United States, 150 million acres managed for wildlife conservation by the US Fish and Wildlife Service, 84 million acres of National Parks and other lands managed by the National Park Service, and over 30 million acres managed by the Department of Defense. The Bureau of Reclamation manages a much smaller land base than the other agencies included in this layer but plays a critical role in managing the country's water resources. The agencies included in this layer are:Bureau of Land ManagementDepartment of DefenseNational Park ServiceUS Fish and Wildlife ServiceUS Forest ServiceDataset SummaryPhenomenon Mapped: United States federal lands managed by six federal agenciesGeographic Extent: 50 United States and the District of Columbia, Puerto Rico, US Virgin Islands, Guam, American Samoa, and Northern Mariana Islands. The layer also includes National Monuments and Wildlife Refuges in the Pacific Ocean, Atlantic Ocean, and the Caribbean Sea.Data Coordinate System: WGS 1984Visible Scale: The data is visible at all scales but draws best at scales greater than 1:2,000,000Source: BLM, DOD, USFS, USFWS, NPS, PADUS 3.0Publication Date: Various - Esri compiled and published this layer in May 2025. See individual agency views for data vintage.There are six layer views available that were created from this service. Each layer uses a filter to extract an individual agency from the service. For more information about the layer views or how to use them in your own project, follow these links:USA Bureau of Land Management LandsUSA Department of Defense LandsUSA National Park Service LandsUSA Fish and Wildlife Service LandsUSA Forest Service LandsWhat can you do with this Layer?This layer is suitable for both visualization and analysis across the ArcGIS system. This layer can be combined with your data and other layers from the ArcGIS Living Atlas of the World in ArcGIS Online and ArcGIS Pro to create powerful web maps that can be used alone or in a story map or other application.Because this layer is part of the ArcGIS Living Atlas of the World it is easy to add to your map:In ArcGIS Online, you can add this layer to a map by selecting Add then Browse Living Atlas Layers. A window will open. Type "federal lands" in the search box and browse to the layer. Select the layer then click Add to Map.In ArcGIS Pro, open a map and select Add Data from the Map Tab. Select Data at the top of the drop down menu. The Add Data dialog box will open on the left side of the box, expand Portal if necessary, then select Living Atlas. Type "federal lands" in the search box, browse to the layer then click OK.In both ArcGIS Online and Pro you can change the layer's symbology and view its attribute table. You can filter the layer to show subsets of the data using the filter button in Online or a definition query in Pro.The data can be exported to a file geodatabase, a shapefile or other format and downloaded using the Export Data button on the top right of this webpage.This layer can be used as an analytic input in both Online and Pro through the Perform Analysis window Online or as an input to a geoprocessing tool, model, or Python script in Pro.The ArcGIS Living Atlas of the World provides an easy way to explore many other beautiful and authoritative maps on hundreds of topics like this one.Questions?Please leave a comment below if you have a question about this layer, and we will get back to you as soon as possible.

This map layer consists of federally owned or administered lands of the United States, Puerto Rico, and the U.S. Virgin Islands. Only areas of 640 acres or more are included. There may be private inholdings within the boundaries of Federal lands in this map layer. This is a revised version of the January 2005 map layer.

This map uses the USA Generalized Federal Lands layer which presents the federal and tribal land areas of the United States. The lands are symbolized by the managing agency. A vector tile layer showing federal land boundaries and place names is included in this map.

This data set depicts federal lands having restrictions on access or activities -- that is, lands mangaed by the National Park Service, Defense Department, or Energy Department -- in western North America. The data set was created by reformatting and merging state- and province-based ownership data layers originally acquired from diverse sources (including state GAP programs, USBLM state offices and other sources). For each original dataset 3 additional fields, "Pub_Pvt", "CA_OWN", and "SOURCE" were added and populated based on the specific ownership information contained in the source data. The original coverages were then merged based on the "CA_OWN" field. Finally, NPS, DOD, and DOE lands were selected out of the ownership layer. All work was completed in AcMap 8.3. This product and all source data are available online from SAGEMAP: http://sagemap.wr.usgs.gov.

This ownership dataset utilizes a methodology that results in a federal ownership extent that matches the Federal Responsibility Areas (FRA) footprint from CAL FIRE's State Responsibility Areas for Fire Protection (SRA) data. FRA lands are snapped to county parcel data, thus federal ownership areas will also be snapped. Since SRA Fees were first implemented in 2011, CAL FIRE has devoted significant resources to improve the quality of SRA data. This includes comparing SRA data to data from other federal, state, and local agencies, an annual comparison to county assessor roll files, and a formal SRA review process that includes input from CAL FIRE Units. As a result, FRA lands provide a solid basis as the footprint for federal lands in California (except in the southeastern desert area). The methodology for federal lands involves:

The map depicts Federal Lands Highway (FLH) American Recovery and Reinvestment Act (ARRA) projects, which are administered through the Federal Lands Divisions (FLD). These include projects that are funded by the Bureau of Land Management (BLM), Bureau of Reclamation (BOR), Fish and Wildlife Service (FWS), National Park Service (NPS), the US Forest Service (USFS) and other State-level projects.

The USGS Protected Areas Database of the United States (PAD-US) is the nation's inventory of protected areas, including public open space and voluntarily provided, private protected areas, identified as an A-16 National Geospatial Data Asset in the Cadastral Theme (http://www.fgdc.gov/ngda-reports/NGDA_Datasets.html). PAD-US is an ongoing project with several published versions of a spatial database of areas dedicated to the preservation of biological diversity, and other natural, recreational or cultural uses, managed for these purposes through legal or other effective means. The geodatabase maps and describes public open space and other protected areas. Most areas are public lands owned in fee; however, long-term easements, leases, and agreements or administrative designations documented in agency management plans may be included. The PAD-US database strives to be a complete “best available” inventory of protected areas (lands and waters) including data provided by managing agencies and organizations. The dataset is built in collaboration with several partners and data providers (http://gapanalysis.usgs.gov/padus/stewards/). See Supplemental Information Section of this metadata record for more information on partnerships and links to major partner organizations. As this dataset is a compilation of many data sets; data completeness, accuracy, and scale may vary. Federal and state data are generally complete, while local government and private protected area coverage is about 50% complete, and depends on data management capacity in the state. For completeness estimates by state: http://www.protectedlands.net/partners. As the federal and state data are reasonably complete; focus is shifting to completing the inventory of local gov and voluntarily provided, private protected areas. The PAD-US geodatabase contains over twenty-five attributes and four feature classes to support data management, queries, web mapping services and analyses: Marine Protected Areas (MPA), Fee, Easements and Combined. The data contained in the MPA Feature class are provided directly by the National Oceanic and Atmospheric Administration (NOAA) Marine Protected Areas Center (MPA, http://marineprotectedareas.noaa.gov ) tracking the National Marine Protected Areas System. The Easements feature class contains data provided directly from the National Conservation Easement Database (NCED, http://conservationeasement.us ) The MPA and Easement feature classes contain some attributes unique to the sole source databases tracking them (e.g. Easement Holder Name from NCED, Protection Level from NOAA MPA Inventory). The "Combined" feature class integrates all fee, easement and MPA features as the best available national inventory of protected areas in the standard PAD-US framework. In addition to geographic boundaries, PAD-US describes the protection mechanism category (e.g. fee, easement, designation, other), owner and managing agency, designation type, unit name, area, public access and state name in a suite of standardized fields. An informative set of references (i.e. Aggregator Source, GIS Source, GIS Source Date) and "local" or source data fields provide a transparent link between standardized PAD-US fields and information from authoritative data sources. The areas in PAD-US are also assigned conservation measures that assess management intent to permanently protect biological diversity: the nationally relevant "GAP Status Code" and global "IUCN Category" standard. A wealth of attributes facilitates a wide variety of data analyses and creates a context for data to be used at local, regional, state, national and international scales. More information about specific updates and changes to this PAD-US version can be found in the Data Quality Information section of this metadata record as well as on the PAD-US website, http://gapanalysis.usgs.gov/padus/data/history/.) Due to the completeness and complexity of these data, it is highly recommended to review the Supplemental Information Section of the metadata record as well as the Data Use Constraints, to better understand data partnerships as well as see tips and ideas of appropriate uses of the data and how to parse out the data that you are looking for. For more information regarding the PAD-US dataset please visit, http://gapanalysis.usgs.gov/padus/. To find more data resources as well as view example analysis performed using PAD-US data visit, http://gapanalysis.usgs.gov/padus/resources/. The PAD-US dataset and data standard are compiled and maintained by the USGS Gap Analysis Program, http://gapanalysis.usgs.gov/ . For more information about data standards and how the data are aggregated please review the “Standards and Methods Manual for PAD-US,” http://gapanalysis.usgs.gov/padus/data/standards/ .

This map uses the USA Generalized Federal Lands layer which presents the federal and tribal land areas of the United States. The lands are symbolized by the managing agency. A vector tile layer showing federal land boundaries and place names is included in this map.

[Metadata] Description: Government Landownership in the State of Hawaii as of 2022: County, Federal, State, and State DHHL LandsSources: County of Kauai, April, 2022; City & County of Honolulu, April 27, 2022; County of Maui, April, 2022; County of Hawaii, April, 2022; State Department of Hawaiian Home Lands, October, 2022. This dataset was created using ownership information provided by the counties via tax map key parcel layers and ownership tables. Parcels were queried using the "Owner" field for state, county, and federal agency names. State GIS staff verified land ownership using the online service QPublic, the 2022 Department of Hawaiian Home Lands layer and other GIS layers and resources. Where ownership was still unclear, State GIS personnel reached out to appropriate agencies for clarification. Summary fields “majorowner” and “type” were created using additional filters, queries and analysis tools to summarize the data based upon government ownership sector and type. Also see detailed government ownership layer (gov_own_detailed) which is comprised of government land ownership by TMK parcel. The parcel boundaries are intended to provide a visual reference only and do not represent legal or survey level accuracy. Attributes are for assessment purposes only and are subject to change at any time. For additional information, please refer to metadata at https://files.hawaii.gov/dbedt/op/gis/data/gov_own.pdf or contact the Hawaii Statewide GIS Program, Office of Planning and Sustainable Development, State of Hawaii; PO Box 2359, Honolulu, Hi. 96804; (808) 587-2846; email: gis@hawaii.gov; Website: https://planning.hawaii.gov/gis.

In the United States, the federal government manages approximately 28% of the land in the United States. Most federal lands are west of the Mississippi River, where almost half of the land by area is managed by the federal government. Federal lands include 193 million acres managed by the US Forest Service in 154 National Forests and 20 National Grasslands, Bureau of Land Management lands that cover 247 million acres in Alaska and the Western United States, 150 million acres managed for wildlife conservation by the US Fish and Wildlife Service, 84 million acres of National Parks and other lands managed by the National Park Service, and over 30 million acres managed by the Department of Defense. The Bureau of Reclamation manages a much smaller land base than the other agencies included in this layer but plays a critical role in managing the country"s water resources. The agencies included in this layer are:Bureau of Land ManagementBureau of ReclamationDepartment of DefenseNational Park ServiceUS Fish and Wildlife ServiceUS Forest Service Dataset SummaryPhenomenon Mapped: United States federal lands managed by six federal agenciesGeographic Extent: 50 United States and the District of Columbia, Puerto Rico, US Virgin Islands, Guam, American Samoa, and Northern Mariana Islands. The layer also includes National Monuments and Wildlife Refuges in the Pacific Ocean, Atlantic Ocean, and the Caribbean Sea.Mosaic Projection: Web Mercator Auxiliary SphereData Coordinate System: WGS 1984Cell Size: 30.92208102 metersUnits: MetersSource Type: DiscretePixel Type: 8-bit unsigned integerSource: BLM, DOD, USFS, USFWS, NPS, PADUS 3.0. Rasterized by Esri from features May 2025.Publication Date: Various - Esri compiled and published this layer in May 2025. See individual agency views for data vintage. The service behind this layer was published with 6 processing templates allowing the user to select lands managed by a single agency. Other layers created from this service using these processing templates include:USA Bureau of Land Management LandsUSA Bureau of Reclamation LandsUSA Department of Defense LandsUSA National Park Service LandsUSA Fish and Wildlife Service LandsUSA Forest Service Lands A hosted feature service created from these data is also available. The hosted feature service provides the same data in greater detail at larger scales while this layer may render more quickly at small scales. Both services use the same symbology, so together they may provide the map reader a seamless experience at all map scales. What can you do with this Layer?This layer is suitable for both visualization and analysis across the ArcGIS system. This layer can be combined with your data and other layers from the ArcGIS Living Atlas of the World in ArcGIS Online and ArcGIS Pro to create powerful web maps that can be used alone or in a story map or other application. Because this layer is part of the ArcGIS Living Atlas of the World it is easy to add to your map:In ArcGIS Online, you can add this layer to a map by selecting Add then Browse Living Atlas Layers. A window will open. Type "federal lands" in the search box and browse to the layer. Select the layer then click Add to Map. In ArcGIS Pro, open a map and select Add Data from the Map Tab. Select Data at the top of the drop down menu. The Add Data dialog box will open on the left side of the box, expand Portal if necessary, then select Living Atlas. Type "federal lands" in the search box, browse to the layer then click OK. In ArcGIS Pro you can use the built-in raster functions or create your own to create custom extracts of the data. Imagery layers provide fast, powerful inputs to geoprocessing tools, models, or Python scripts in Pro. Online you can filter the layer to show subsets of the data using the filter button and the layer"s built-in raster functions. The ArcGIS Living Atlas of the World provides an easy way to explore many other beautiful and authoritative maps on hundreds of topics like this one. Questions?Please leave a comment below if you have a question about this layer, and we will get back to you as soon as possible.

In the United States, the federal government manages lands in significant parts of the country. These lands include 193 million acres managed by the US Forest Service in the nation's 154 National Forests and 20 National Grasslands, Bureau of Land Management lands that cover 247 million acres in Alaska and the Western United States, 150 million acres managed for wildlife conservation by the US Fish and Wildlife Service, 84 million acres of National Parks and other lands managed by the National Park Service and over 30 million acres managed by the Department of Defense. The Bureau of Reclamation manages a much smaller land base than the other agencies included in this layer but plays a critical role in managing the country's water resources.The agencies included in this layer are:Bureau of Land ManagementDepartment of DefenseNational Park ServiceUS Fish and Wildlife ServiceUS Forest Service

River Reach Habitat Quality (RFC 2008)

This layer was digitized in 2015 for the HRS Board using data from the 2008 State of the Watershed Report. This layer shows the quality of habitat surveyed by Delia Malone on selected reaches in the Roaring Fork Watershed. This data is intended as a reference for future research and planning, site specific conditions may vary. Strahler Steam Order numbers are also given for each river reach.

River Watch Sites

This layer was digitized in 2015 for the HRS Board using data from the Roaring Fork Conservancy. The layer shows River Watch sites where the RFC and partner organizations monitor stream health indicators. Active sites are marked with an “x” in the popup. To access the data please visit http://cpw.state.co.us/aboutus/Pages/RW-DataSheets.aspx and search for the river and monitoring site of interest. For more information about the program and additional summery data please contact the RFC www.roaringfork.org

Surface Water Realtime (USGS, CDSS)

This layer shows realtime telemetry gauges maintained by the United States Geological Survey and the Colorado Decision Support System. Click on the icon and then click on “more info” to link to the gauge website. This layer can be used to monitor stream flows and diversion tunnel flows (cfs). Please see the USGS and CDSS websites for more information.

Parcel Boundary (Pitkin County GIS 2015)

This layer identifies property boundaries in Pitkin County. The Parcel geometry is created by reading legal descriptions through Plats, Surveys, Deeds, and CAD drawing files. Approximately 15% of land in Pitkin County is privately held, which is represented in this layer. Federal lands are shown in the Forest Lands layer. Please see http://www.pitkincounty.com/458/GIS-Mapping for more information.

Recreation Easement (Pitkin County GIS 2015)

This layer contains recreation easements throughout Pitkin County with attributes that include the easement type, common name and establishment information. Please see http://www.pitkincounty.com/458/GIS-Mapping or Pitkin County Open Spaces and Trails for more information.

Federal Land Boundary (Pitkin County GIS 2015)The parcel layer and Forest (or Federal Land) layer are independently maintained layers. The Forest layer included lands owned by U.S. Forest Service (USFS), Bureau of Land Management (BLM), and the State of Colorado (State of CO). Approximately 85% of the land area in Pitkin County is Federal Land. Please see http://www.pitkincounty.com/458/GIS-Mapping for more information.SNOTEL Sites From NRCSThese files are updated daily around 7:30 am and 12:30 Pacific Time with midnight summaries of the previous day's data. The symbols are color-coded by the current snow water equivalent as a percent of the 1981-2010 normal on this date. Clicking on a symbol will reveal additional information, including a photo of the site, more real-time data, and links to charts and additional reports. Please visit http://www.wcc.nrcs.usda.gov/snotel/ for more information.

This map layer portrays the linear federally-owned land features (i.e., national parkways, wild and scenic rivers, etc.) of the United States, Puerto Rico, and the U.S. Virgin Islands. The map layer was created by extracting linear federal land features from the 1:2,000,000-scale individual State DLG files produced by the U.S. Geological Survey. These files were then merged into a single map layer. This is a revised version of the July 2001 map layer.

Federal Land, Other refers to an area of land over which the Federal Crown has exclusive jurisdiction and/or ownership excluding Indian Reserves and Federal Protected Areas. These polygon boundaries should be verified using Federal Crown Land Survey Records and/or title searched at the local Land Registry Office. This data set may not include all Federally owned lands.Additional DocumentationFederal Land Other - Data DescriptionFederal Land Other - DocumentationStatusOn going: Data is continually being updatedMaintenance and Update FrequencyAs needed: Data is updated as deemed necessaryContactOffice of the Surveyor General, landtenuremapping@ontario.ca

description: Map of public and private lands in Region 9 for use in association with Navajo Nation AUM project.; abstract: Map of public and private lands in Region 9 for use in association with Navajo Nation AUM project.

HEPGIS is a web-based interactive geographic map server that allows users to navigate and view geo-spatial data, print maps, and obtain data on specific features using only a web browser. It includes geo-spatial data used for transportation planning. HEPGIS previously received ARRA funding for development of Economically distressed Area maps. It is also being used to demonstrate emerging trends to address MPO and statewide planning regulations/requirements , enhanced National Highway System, Primary Freight Networks, commodity flows and safety data . HEPGIS has been used to help implement MAP-21 regulations and will help implement the Grow America Act, particularly related to Ladder of Opportunities and MPO reforms.

As part of a 2018 Northwest Climate Adaptation and Science Center project, USGS researchers are releasing a series of spatially-explicit land-cover projections for the period 2018-2050 covering part of the northern Great Basin (Beaty Butte Herd Management Area, Hart Mountain National Antelope Refuge, and Sheldon National Refuge). The dataset contains an empirically-based business-as-usual (BAU) and an RCP8.5 climate change scenario executed for shrub, herbaceous, and bare cover types. Each scenario is executed 30 times (i.e. Monte Carlo simulations) to account for variability across historical change estimates derived from annual fractional cover maps generated by the National Land Cover Database. The map dates are 2018, 2019, 2023, 2028, 2033, 2038, 2043, 2048, and 2050. The resulting state class maps have a 300-meter resolution, and each pixel value describes the fractional cover for the modeled cover type (percent from 0-100%). The maps for each scenario are labeled accordingly: “sc” for state class, “it” for iteration (followed by iteration number), “ts” for time step (followed by simulated year). The downloadable files are organized by cover type and scenario and are available in the GeoTIF (.tif) raster file format. The 1,620 TIF raster data files were created using free state-and-transition software created by ApexRMS.

This service is a subset of the Surface Management Agency (SMA) Geographic Information System (GIS) dataset. The service depicts the SMA land for the United States not including Private or Unknown lands. It is set to be 50% transparent in order to view the base map underneath. The Cached service is available to the ArcGIS.com tiling scheme level 14 (~1:36K). The SMA feature class currently covers all of the BLM Western State Offices including Alaska. The SMA data contained in this dataset are extracted from Federal land status records. The official Federal land status records of the appropriate surface land managing agency should be consulted concerning ownership details including interest in the federal subsurface mineral estate. The GIS data contained in this dataset depict the surface extent of each Federal agency’s surface administrative jurisdiction. SMA data depict current withdrawn areas for a particular agency and (when appropriate) includes land that was acquired or exchanged and is located outside of a withdrawal area for that agency. The SMA data do not illustrate land status ownership pattern boundaries or contain land ownership attribute details.

This geospatial dataset depicts ownership patterns of forest land across Michigan, circa 2019. The data sources are listed below. The first seven sources of data supersede the final data source. The final data source is modeled from Forest Inventory and Analysis points from 2012-2017 and the most up-to-date publicly available boundaries of federal, state, and tribal lands.1.MI_State_Boundary_Census_Gov_2019.shp (State of MI boundary) clipped from cb_2019_us_state_500k from https://www.census.gov/geographies/mapping-files/time-series/geo/cartographic-boundary.html2.NPS_Land_Resources_Division_MI.shp clipped from NPS_-_Land_Resources_Division_Boundary_and_Tract_Data_Service-shp taken from https://public-nps.opendata.arcgis.com/datasets/nps-land-resources-division-boundary-and-tract-data-service/data?layer=1Published December 12, 2019This service depicts National Park Service tract and boundary data that was created by the Land Resources Division. NPS Director's Order #25 states: "Land status maps will be prepared to identify the ownership of the lands within the authorized boundaries of the park unit. These maps, showing ownership and acreage, are the 'official record' of the acreage of Federal and non-federal lands within the park boundaries. While these maps are the official record of the lands and acreage within the unit's authorized boundaries, they are not of survey quality and not intended to be used for survey purposes." As such this data is intended for use as a tool for GIS analysis. It is in no way intended for engineering or legal purposes. The data accuracy is checked against best available sources which may be dated and vary by location. NPS assumes no liability for use of this data. The boundary polygons represent the current legislated boundary of a given NPS unit. NPS does not necessarily have full fee ownership or hold another interest (easement, right of way, etc...) in all parcels contained within this boundary. Equivalently NPS may own or have an interest in parcels outside the legislated boundary of a given unit. In order to obtain complete information about current NPS interests both inside and outside a unit’s legislated boundary tract level polygons are also created by NPS Land Resources Division and should be used in conjunction with this boundary data. To download this data directly from the NPS go to https://irma.nps.gov/App/Portal/Home Property ownership data is compiled from deeds, plats, surveys, and other source data. These are not engineering quality drawings and should be used for administrative purposes only. The National Park Service (NPS) shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time. The data are not better than the original sources from which they were derived. It is the responsibility of the data user to use the data appropriately and consistent within the limitations of geospatial data in general and these data in particular. The related graphics are intended to aid the data user in acquiring relevant data; it is not appropriate to use the related graphics as data. The National Park Service gives no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data. It is strongly recommended that these data are directly acquired from an NPS server and not indirectly through other sources which may have changed the data in some way. Although these data have been processed successfully on a computer system at the National Park Service, no warranty expressed or implied is made regarding the utility of the data on another system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. This disclaimer applies both to individual use of the data and aggregate use with other data. Terms of UseProperty ownership data is compiled from deeds, plats, surveys, and other source data. These are not engineering quality drawings and should be used for administrative purposes only. The National Park Service shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time. The data are not better than the original sources from which they were derived. It is the responsibility of the data user to use the data appropriately and consistent within the limitations of geospatial data in general and these data in particular. The related graphics are intended to aid the data user in acquiring relevant data; it is not appropriate to use the related graphics as data. The National Park Service gives no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data. It is strongly recommended that these data are directly acquired from an NPS server and not indirectly through other sources which may have changed the data in some way. Although these data have been processed successfully on a computer system at the National Park Service, no warranty expressed or implied is made regarding the utility of the data on another system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. This disclaimer applies both to individual use of the data and aggregate use with other data.3.Isle Royale.shp only Isle Royale clipped from MI_State_Boundary_Census_Gov_2019.shp4.FWSInterest_MI.shp (U.S. Fish and Wildlife Service) clipped from FWSInterest from FWSInterest_Apr2020.zipfrom https://www.fws.gov/gis/data/CadastralDB/index_cadastral.html (being moved on 6/26/2020)Use inttype1 = OThis data layer depicts lands and waters administered by the U.S. Fish and Wildlife Service (USFWS) in North America, U.S. Trust Territories and Possessions. It may also include inholdings that are not administered by USFWS. The primary source for this information is the USFWS Realty program.5.surfaceownership_MI.shp (U.S. National Forest Service) clipped from S_USA.SurfaceOwnership.gdb and downloaded fromhttps://data.fs.usda.gov/geodata/edw/datasets.phphttps://data.fs.usda.gov/geodata/edw/datasets.php?xmlKeyword=surfaceownershiprefreshed May 26, 2020Used NFSLandU_4 field and surfaceO_3 and surfaceO_3 to identify NFS parcelsAn area depicting ownership parcels of the surface estate. Each surface ownership parcel is tied to a particular legal transaction. The same individual or organization may currently own many parcels that may or may not have been acquired through the same legal transaction. Therefore, they are captured as separate entities rather than merged together. This is in contrast to Basic Ownership, in which the surface ownership parcels having the same owner are merged together. Basic Ownership provides the general user with the Forest Service versus non-Forest Service view of land ownership within National Forest boundaries. Surface Ownership provides the land status user with a current snapshot of ownership within National Forest boundaries.6.MichiganDNR_02062020.shp (State of Michigan) from the State of MI delivered @ email on 5/14/2020Has State forests, State Wildlife areas, and State parks.7.The previous public ownership layers supersede this Sass et al. (2020) layer.In Sass et al. (2020), the nonforest areas are masked out.Identification_Information:Citation:Citation_Information:Originator: Sass, Emma M.Originator: Butler, Brett J.Originator: Markowski-Lindsay, Marla Publication_Date: 2020Title:Estimated distribution of forest ownership across the conterminous United States – geospatial datasetGeospatial_Data_Presentation_Form: raster digital dataPublication_Information:Publication_Place: Fort Collins, COPublisher: Forest Service Research Data ArchiveEight values of ownership type:1 = Family (Private): Owned by families, individuals, trusts, estates, family partnerships, and other unincorporated groups of individuals that own forest land. FIACode 45.2 = Corporate (Private): Owned by corporations. FIA Code 41.3 = TIMO/REIT (Private): Owned by Timber Investment Management Organizations or Real Estate Investment Trusts. Included in FIA Code 414 = Other Private (Private): Owned by conservation and natural resource organizations, unincorporated partnerships and associations. FIA Codes 42-43.5 = Federal (Public): Owned by the federal government. FIA Codes 11-13, 21-25.6 = State (Public): Owned by a state government. FIA Code 31.7 = Local (Public): Owned by a local government. FIA Code 32.8 = Tribal: Owned by Native American tribes. FIA Code 44.8.FIA inventory units developed by FIA, 2020

Administered Lands is a BLM Alaska GIS dataset that combines publicly available borough, municipality, state, federal, and other entity management and ownership GIS data. This is the basis for BLM’s national Surface Management Agency GIS dataset that was developed to fulfill the public and Government’s need to know what agency is managing Federal land in a given area. This data set is comprised of various sources of geospatial information that have been acquired from local, state and federal agencies in order to assemble a comprehensive representation of current land surface manager. There are many land managing agencies and branches of government and this dataset attempts to classify these entities into general categories. This data does not demonstrate or infer land ownership. The business need for this data includes, but is not limited to, land use planning, permitting, recreation, and emergency response. Due to the nature of assembling geospatial information from multiple sources, integration of features into a single layer may introduce inaccurate artifacts. Acquired datasets have been cross-walked to a standardized schema to aid in the depiction of land surface manager across the state of Alaska. This dataset will contain errors. For the most up to date and accurate information, please contact the surface manager agency for the area in which you are interested.