FEMA provides access to the National Flood Hazards Layer (NFHL) through web mapping services. The maps depict effective flood hazard information and supporting data. The primary flood hazard classification is indicated in the Flood Hazard Zones layer.The NFHL layers include:Flood hazard zones and labelsRiver Miles MarkersCross-sections and coastal transects and their labelsLetter of Map Revision (LOMR) boundaries and case numbersFlood Insurance Rate Map (FIRM) boundaries, labels and effective datesCoastal Barrier Resources System (CBRS) and Otherwise Protected Area (OPA) unitsCommunity boundaries and namesLeveesHydraulic and flood control structuresProfile and coastal transect baselinesLimit of Moderate Wave Action(LiMWA)Not all effective Flood Insurance Rate Maps (FIRM) have GIS data available. To view a list of available county and single-jurisdiction flood study data in GIS format and check the status of the NFHL GIS services, please visit the NFHL Status Page.Preliminary & Pending National Flood Hazard LayersThe Preliminary and Pending NFHL dataset represents the current pre-effective flood data for the country. These layers are updated as new preliminary and pending data becomes available, and data is removed from these layers as it becomes effective.For more information, please visit FEMA's website.To download map panels or GIS Data, go to: NFHL on FEMA GeoPlatform.Preliminary & Pending DataPreliminary data are for review and guidance purposes only. By viewing preliminary data and maps, the user acknowledges that the information provided is preliminary and subject to change. Preliminary data are not final and are presented in this national layer as the best information available at this time. Additionally, preliminary data cannot be used to rate flood insurance policies or enforce the Federal mandatory purchase requirement. FEMA will remove preliminary data once pending data are available.Pending data are for early awareness of upcoming changes to regulatory flood map information. Until the data becomes effective, when it will appear in FEMA's National Flood Hazard Layer (NFHL), the data should not be used to rate flood insurance policies or enforce the Federal mandatory purchase requirement. FEMA will remove pending data once effective data are available.To better understand Preliminary data please see the View Your Community's Preliminary Flood Hazard Data webpage.FEMA GeoPlatformFEMA's GIS flood map services are available through FEMAs GeoPlatform, an ArcGIS Online portal containing a variety of FEMA-related data.To view the NFHL on the FEMA GeoPlatform go to NFHL on FEMA GeoPlatform.To view the Preliminary and Pending national layers on the FEMA Geoplatform go to FEMA's Preliminary & Pending National Flood Hazard Layer.Technical InformationFlood hazard and supporting data are developed using specifications for horizontal control consistent with 1:12,000–scale mapping. If you plan to display maps from the NFHL with other map data for official purposes, ensure that the other information meets FEMA’s standards for map accuracy.The minimum horizontal positional accuracy for base map hydrographic and transportation features used with the NFHL is the NSSDA radial accuracy of 38 feet. United States Geological Survey (USGS) imagery and map services that meet this standard can be found by visiting the Knowledge Sharing Site (KSS) for Base Map Standards (420). Other base map standards can be found at https://riskmapportal.msc.fema.gov/kss/MapChanges/default.aspx. You will need a username and password to access this information.The NFHL data are from FEMA’s FIRM databases. New data are added continually. The NFHL also contains map changes to FIRM data made by LOMRs.The NFHL is stored in North American Datum of 1983, Geodetic Reference System 80 coordinate system, though many of the NFHL GIS web services support the Web Mercator Sphere projection commonly used in web mapping applications.Organization & DisplayThe NFHL is organized into many data layers. The layers display information at map scales appropriate for the data. A layer indicating the availability of NFHL data is displayed at map scales smaller than 1:250,000, regional overviews at map scales between 1:250,000 and 1:50,000, and detailed flood hazard maps at map scales of 1:50,000 and larger. The "Scalehint" item in the Capabilities file for the Web Map Service encodes the scale range for a layer.In addition, there are non-NFHL datasets provided in the GIS web services, such as information about the availability of flood data and maps, the national map panel scheme, and point locations for LOMA and LOMR-Fs. The LOMA are positioned less accurately than are the NFHL data.Layers in the public NFHL GIS services:Use the numbers shown below when referencing layers by number.0. NFHL Availability1. LOMRs2. LOMAs3. FIRM Panels4. Base Index5. PLSS6. Toplogical Low Confidence Areas7. River Mile Markers8. Datum Conversion Points9. Coastal Gages10. Gages11. Nodes12. High Water Marks13. Station Start Points14. Cross-Sections15. Coastal Transects16. Base Flood Elevations17. Profile Baselines18. Transect Baselines19. Limit of Moderate Wave Action20. Water Lines21. Coastal Barrier Resources System Area22. Political Jurisdictions23. Levees24. General Structures25. Primary Frontal Dunes26. Hydrologic Reaches27. Flood Hazard Boundaries28. Flood Hazard Zones29. Submittal Information30. Alluvial Fans31. Subbasins32. Water Areas

According to FEMA the definition of a flood zone is a "geographic areas that FEMA has defined according to varying levels of flood risk and type of flooding. These zones are depicted on the published Flood Insurance Rate Map (FIRM) or Flood Hazard Boundary Map (FHBM)."

This dataset comes from the FEMA S_Fld_Haz_Ar table. The S_Fld_Haz_Ar table contains information about the flood hazards within the flood risk project area. A spatial file with location information also corresponds with this data table. These zones are used by FEMA to designate the SFHA and for insurance rating purposes. These data are the regulatory flood zones designated by FEMA. A spatial file with location information also corresponds with this data table.This information is needed for the following tables in the FIS report: Flooding Sources Included in this FIS report, and Summary of Hydrologic and Hydraulic Analyses.The spatial elements representing the flood zones are polygons. The entire area of the jurisdiction(s) mapped by the FIRM should have a corresponding flood zone polygon. There is one polygon for each contiguous flood zone designated.FEMA Regulatory Floodway are flood zone polygons marked as a regulatory floodway.FEMA 100 year are flood zone polygons where there is a 1% Annual Chance, also known as the 100 year.FEMA 500 year are flood zone polygons where there is a 0.2% Annual Chance, also known as the 500 year.FEMA minimal flood hazard zone polygons.This map is not intended for insurance rating purposes and is for information only. This map is a representation and approximation of the relative location of geographic information, land marks and physical addresses. The map may not be 100% accurate in locating your address. The floodplains shown on this mapping tool are those delineated on the Federal Emergency Management Agency’s (FEMA) Digital Flood Insurance Rate Map (DFIRM or floodplain map) for Montgomery County. This map is not an official FEMA Digital Flood Insurance Rate Map. The effective DFIRMs are produced, maintained, and published by FEMA and not by Montgomery County. Official determinations are provided by FEMA.

This dataset displays the locations of flood hazard zones identified by FEMA. The Federal Emergency Management Agency (FEMA) produces Flood Insurance Rate maps and identifies Special Flood Hazard Areas as part of the National Flood Insurance Program's floodplain management. Special Flood Hazard Areas have regulations that include the mandatory purchase of flood insurance. This layer is derived from the October 13, 2021 version of the National Flood Hazard Layer feature class S_Fld_Haz_Ar. The data were aggregated into eight classes to produce the Esri Symbology field based on symbology provided by FEMA. All other layer attributes are derived from the National Flood Hazard Layer.The layer was projected to Web Mercator Auxiliary Sphere, then the repair geometry geoprocessing tool was run on it. Its resolution was set to 0.0001 meter. To improve performance Flood Zone values "Area Not Included", "Open Water", "D", "NP", and No Data were removed from the layer. Areas with Flood Zone value "X" subtype "Area of Minimal Flood Hazard" were also removed. An imagery layer created from this dataset provides access to the full set of records in the National Flood Hazard Layer.View Dataset on the Gateway

The entire Vermont extent of the National Flood Hazard Layer (NFHL) as acquired 12/15/15 from the FEMA Map Service Center msc.fema.gov upon publication 12/2/2015 and converted to VSP.The FEMA DFIRM NFHL database compiles all available officially-digitized Digital Flood Insurance Rate Maps. This extract from the FEMA Map Service Center includes all of such data in Vermont including counties and a few municipalities. This data includes the most recent map update for Bennington County effective 12/2/2015.DFIRM - Letter of Map Revision (LOMR) DFIRM X-Sections DFIRM Floodways Special Flood Hazard Areas (All Available)

THIS LAYER IS HOSTED BY FEMA, not NAPSG Foundation. We are simply pointing to their layer with this ArcGIS Online item. The National Flood Hazard Layer (NFHL) dataset represents the current effective flood data for the country, where maps have been modernized. It is a compilation of effective Flood Insurance Rate Map (FIRM) databases and Letters of Map Change (LOMCs). The NFHL is updated as studies go effective. For more information, visit FEMA's Map Service Center (MSC). You can view this information in a standalone viewer here: https://hazards-fema.maps.arcgis.com/apps/webappviewer/index.html?id=8b0adb51996444d4879338b5529aa9cdREST URL: https://hazards.fema.gov/gis/nfhl/rest/services/public/NFHL/MapServerBase Map ConsiderationsThe default base map is from an ESRI service and conforms to FEMA's specification for horizontal accuracy. This base map is composed of the orthoimagery used when the Flood Insurance Rate Maps (FIRMs) were initially created combined with standard imagery products managed by ESRI. This map should be considered the best online resource to use for official National Flood Insurance Program (NFIP) purposes when determining locations in relation to regulatory flood hazard information. If a different base map is used with the NFHL, the accuracy specification may not be met and the resulting map should be used for general reference only, and not official NFIP purposes.Further InformationFor more flood map data, tool, and viewing options, visit the FEMA NFHL page.Several fact sheets are available to help you learn more about FEMA’s NFHL utility: National Flood Hazard Layer (NFHL) GIS Services Users GuideNational Flood Hazard Layer (NFHL): New Products and Services for FEMA's Flood Hazard Map DataNFHL GIS Data: Perform Spatial Analyses and Make Custom Maps and Reports

These data represent a subset of the data available on the paper Flood Insurance Rate Maps (FIRM) as provided by the Federal Emergency Management Agency (FEMA). The Q3 flood data were developed to support floodplain management and planning activities but do not replace the official paper FIRMs. These data are not suitable for engineering applications or site work nor can the data be used to determine absolute delineation of flood boundaries. Instead the data should be used to portray zones of uncertainty and possible risks associated with flooding.** This service includes data only for areas for which the newer National Flood Hazard Layer are not available. **Map service is also available.

This hosted feature layer has been published in RI State Plane Feet NAD 83.Statewide flood hazard areas compiled from county-based Digital Flood Insurance Rate Map (DFIRM) databases for Rhode Island. The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. TheDFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA), and in this case redistributed by the Rhode Island Geographic Information System (RIGIS) at the request of the Rhode Island Emergency Management Agency.This dataset provides the user with information on the flood risk hazard zones throughout the state of Rhode Island. Note: the above summary is a slightly modified version adapted from source metadata records provided by FEMA. To provide the user with information on the statewide flood risk based on information provided by the Federal Emergency Management Agency (FEMA) in the DFIRM databases created specifically for the five counties of Rhode Island (Bristol, Kent, Newport, Providence, and Washington). This dataset provides information on the likelihood that a flood may occur at a given location in the state. The files and information used to create this dataset were originally provided to the Rhode Island Emergency Management Agency (RIEMA) by FEMA.This information was in the form of DFIRM databases for each of the five RI counties. This information was then redistributed by RIGIS at the request of RIEMA. The information provided by this data is only a subset of the information available in the original DFIRM databases located on the RIGIS website. For a specific county's complete DFIRM database, please visit the RIGIS website and download the appropriate DFIRM database. This metadata record is specific to this dataset and only contains information relevant to this dataset as provided by FEMA the original DFIRM metadata records. These can be found and referenced in the /DOCUMENT folder that is downloaded as part of a DFIRM package for a specific Rhode Island county. Another valuable source of documentation is FEMA's "Guidelines and Specifications for Flood Hazard Mapping Partners". It is currently available online at https://www.fema.gov/guidelines-and-standards-flood-risk-analysis-and-mapping. The Guide offers a tremendous amount of information regarding how DFIRM data are created, and detailed information about the individual files that constitute a DFIRM database.

2017 FEMA Flood Zone for Macon-Bibb County. Through FEMA's flood hazard mapping program, Risk Mapping, Assessment and Planning (MAP), FEMA identifies flood hazards, assesses flood risks and partners with states and communities to provide accurate flood hazard and risk data to guide them to mitigation actions. Flood hazard mapping is an important part of the National Flood Insurance Program (NFIP), as it is the basis of the NFIP regulations and flood insurance requirements. FEMA maintains and updates data through Flood Insurance Rate Maps (FIRMs) and risk assessments. FIRMs include statistical information such as data for river flow, storm tides, hydrologic/hydraulic analyses and rainfall and topographic surveys. For more information regarding FEMA's flood hazard mapping program visit https://www.fema.gov/national-flood-insurance-program-flood-hazard-mapping.

Abstract: The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12000.

From the Flood Risk Non-Regulatory Database that went into effect June 5, 2020. For more information, visit FEMA.gov Flood Maps.Flood Hazard Zones: The FIRM is the basis for floodplain management, mitigation, and insurance activities for the National Flood Insurance Program (NFIP). Insurance applications include enforcement of the mandatory purchase requirement of the Flood Disaster Protection Act, which "... requires the purchase of flood insurance by property owners who are being assisted by Federal programs or by Federally supervised, regulated or insured agencies or institutions in the acquisition or improvement of land facilities located or to be located in identified areas having special flood hazards," Section 2 (b) (4) of the Flood Disaster Protection Act of 1973. In addition to the identification of Special Flood Hazard Areas (SFHAs), the risk zones shown on the FIRMs are the basis for the establishment of premium rates for flood coverage offered through the NFIP. The DFIRM Database presents the flood risk information depicted on the FIRM in a digital format suitable for use in electronic mapping applications. The DFIRM database is a subset of the Digital FIS database that serves to archive the information collected during the FIS.The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.Flood Hazard Boundary Line: Boundary line dividing Special Flood Hazard Area Zones and boundary dividing Special Flood Hazard Areas of different Base Flood Elevations, flood Depths or flood velocities.Flood Hazard BFE: Location and attributes for base flood elevations lines shown on DFIRM. This line layer was converted to a polygon by COM GIS department.Flood Hazard Cross Section: Location and attributes for cross-section lines in the area covered by the DFIRM.Flood Hazard Map Index: Location and attributes for DFIRM hardcopy map panels.Use limitationsThe hardcopy FIRM and DFIRM and the accompanying FISs are the official designation of SFHAs and Base Flood Elevations (BFEs) for the NFIP. For the purposes of the NFIP, changes to the flood risk information published by FEMA may only be performed by FEMA and through the mechanisms established in the NFIP regulations (44 CFR Parts 59-78). These digital data are produced in conjunction with the hardcopy FIRMs and generally match the hardcopy map exactly. However the hardcopy flood maps and flood profiles are the authoritative documents for the NFIP. Acknowledgement of FEMA would be appreciated in products derived from these data.

On January 25, 2018 FEMA replaced this map with a new NFHL map with additional functionality which allows users to print official flood maps. On April 1, 2018 this map and NFHL link will no longer function. Please update your bookmark to https://hazards-fema.maps.arcgis.com/apps/webappviewer/index.html?id=8b0adb51996444d4879338b5529aa9cd. For more information on NFHL data availability, please visit the NFHL GIS Services page at https://hazards.fema.gov/femaportal/wps/portal/NFHLWMSAs of August 1, 2017 all FEMA systems will require the use of the “https” protocol, and “http” links will no longer function. This may impact NFHL web services. The FEMA GeoPlatform (including this map) will not be affected by this change. For more information on how NFHL GIS services will be impacted, please visit the NFHL GIS Services page at https://hazards.fema.gov/femaportal/wps/portal/NFHLWMS.An NFHL FIRMette print service is now available HERE. (For a video tutorial, click here.)OverviewThe National Flood Hazard Layer (NFHL) dataset represents the current effective flood data for the country, where maps have been modernized. It is a compilation of effective Flood Insurance Rate Map (FIRM) databases and Letters of Map Change (LOMCs). The NFHL is updated as studies go effective. For more information, visit FEMA's Map Service Center (MSC). Base Map ConsiderationsThe default base map is from a USGS service and conforms to FEMA's specification for horizontal accuracy. This base map from The National Map (TNM) consists of National Agriculture Imagery Program (NAIP) and high resolution orthoimagery (HRO) that combine the visual attributes of an aerial photograph with the spatial accuracy and reliability of a map. This map should be considered the best online resource to use for official National Flood Insurance Program (NFIP) purposes when determining locations in relation to regulatory flood hazard information. If a different base map is used with the NFHL, the accuracy specification may not be met and the resulting map should be used for general reference only, and not official NFIP purposes. Users can download a simplified base map from the USGS service via: https://viewer.nationalmap.gov/services/ For the specifics of FEMA’s policy on the use of digital flood hazard data for NFIP purposes see: http://www.fema.gov/library/viewRecord.do?id=3235Letter of Map Amendment (LOMA) pointsLOMA point locations are approximate. The location of the LOMA is referenced in the legal description of the letter itself. Click the LOMA point for a link to the letter (use the arrows at the top of the popup window to bring up the LOMA info, if needed).This LOMA database may include LOMAs that are no longer effective. To be certain a particular LOMA is currently valid, please check relevant documentation at https://msc.fema.gov/ . Relevant documents can be found for a particular community by choosing to "Search All Products", and finding the community by State and County. Documents include LOMAs found in the "Effective Products" and "LOMC" folders, as well as Revalidations (those LOMAs which are still considered to be effective after a map is revised).Updates3/27/2017 - Updated all references to https to prevent issues with mixed content.5/11/2016 - Added link to NFHL FIRMette Print Service. Updated LOMA and CBRS popup notes.2/20/2014 - Created a General Reference map for use when the USGS base map service is down. Renamed this map to "Official".Further InformationSpecific questions about FEMA flood maps can be directed to FEMAMapSpecialist@riskmapcds.comFor more flood map data, tool, and viewing options, visit the FEMA NFHL page. Information about connecting to web map services (REST, WMS, WFS) can be found here.Several fact sheets are available to help you learn more about FEMA’s NFHL utility: National Flood Hazard Layer (NFHL) GIS Services Users GuideNational Flood Hazard Layer (NFHL): New Products and Services for FEMA's Flood Hazard Map DataMoving to Digital Flood Hazard Information Standards for Flood Risk Analysis and MappingNFHL GIS Data: Perform Spatial Analyses and Make Custom Maps and Reports

The S_Fld_Haz_Ar table contains information about the flood hazards within the flood risk project area. These zones are used by FEMA to designate the SFHA and for insurance rating purposes. These data are the regulatory flood zones designated by FEMA.

Normally, any FIRM that has associated flood profiles has cross sections. The S_XS table contains information about cross section lines. These lines usually represent the locations of channel surveys performed for input into the hydraulic model used to calculate flood elevations. Sometimes cross sections are interpolated between surveyed cross sections using high accuracy elevation data. Depending on the zone designation (Zone AE, Zone A, etc.), these locations may be shown on Flood Profiles in the FIS report and can be used to cross reference the Flood Profiles to the planimetric depiction of the flood hazards. This information is used in the Floodway Data Tables in the FIS report, as well as on the FIRM panels.Flood hazard and supporting data are developed using specifications for horizontal control consistent with 1:12,000–scale mapping. If you plan to display maps from the National Flood Hazard Layer with other map data for official purposes, ensure that the other information meets FEMA’s standards for map accuracy.The minimum horizontal positional accuracy for base map hydrographic and transportation features used with the NFHL is the NSSDA radial accuracy of 38 feet. USGS imagery and map services that meet this standard can be found by visiting the Knowledge Sharing Site (KSS) for Base Map Standards (420). Other base map standards can be found athttps://riskmapportal.msc.fema.gov/kss/MapChanges/default.aspx. You will need a username and password to access this information.The NFHL data are from FEMA’s Flood Insurance Rate Map (FIRM) databases. New data are added continually. The NFHL also contains map changes to FIRM data made by Letters of Map Revision (LOMRs).The NFHL is stored in North American Datum of 1983, Geodetic Reference System 80 coordinate system, though many of the NFHL GIS web services support the Web Mercator Sphere projection commonly used in web mapping applications.

The Federal Emergency Managment Agency and the MNDNR produce Digital Flood Insurance Rate Maps (DFIRM) for selected counties in the state. These maps are often referred to as FEMA Floodplain maps.

A DFIRM is the offical digital map of a community on which FEMA has delineated the special flood hazard areas, i.e., the floodplain areas where flood insurance is required for loans and where communities will administer floodplain regulations. (Note: Communities may regulate additional flood prone areas that are not on the FIRM).

Here are some of the feature classes included in the MNDNR's publication of the DFIRM Dataset:

FEMA DFIRM Base Flood Elevations
The Base Flood Elevation (BFE) table is required for any digital data where BFE lines will be shown on the corresponding Flood Insurance Rate Map (FIRM). Normally, if there are any riverine AE zones, BFE lines are required. The BFE table contains information about the BFEs within a study area. A spatial file with locational information also corresponds with this data table. BFE lines indicate the rounded whole-foot water-surface elevation of the 1-percent-annual-chance flood. The spatial elements representing BFE features are lines extending from Special Flood Hazard Area (SFHA) boundary to SFHA boundary. The BFE lines will have no visible gaps or overshoots between the SFHA boundary and the end of the BFE line at the publication scale of the DFIRM. However, the ends of the BFE lines are not necessarily snapped precisely to the SFHA boundary. Each BFE is represented by a single line. While BFE lines are depicted as wavy lines on the hardcopy FIRM, they should be primarily straight lines in the spatial data, although they may bend consistent with procedures described in Volume 1 of these Guidelines.

FEMA DFIRM Flood Hazard Zones
FEMA flood hazard delineations are used by FEMA to designate the SFHA and for insurance rating purposes. These data are the flood hazard areas that are or will be depicted on the FIRM.

FEMA DFIRM Panel Scheme Polygons
This layer contains information about the FIRM panel areas. The spatial entities representing FIRM panels are polygons. The polygon for the FIRM panel corresponds to the panel neatlines. As a result, the panels are generally rectangular. In situations where a portion of a panel lies outside of the jurisdiction being mapped, the user must refer to the S_POL_AR table to determine the portion of the panel area where the DFIRM database shows the effective flood hazard data for the mapped jurisdiction.

FEMA DFIRM Cross Sections
FEMA Cross Sections are required for any Digital Flood Insurance Rate Map database where cross sections are shown on the FIRM. Normally any FIRM that has associated flood profiles has cross sections. The corresponding attribute table contains information about cross section lines. A spatial file with locational information also corresponds with this data table. These lines represent the locations of channel surveys performed for input into the hydraulic model used to calculate flood elevations. These locations are also shown on the Flood Profiles in the Flood Insurance Study (FIS) report and can be used to cross reference the Flood Profiles to the planimetric depiction of the flood hazards. All cross sections for which a spatial location is available should be included in this table. The spatial elements representing cross sections are lines generally extending from outside the floodplain, across the entire floodplain and out the other side. Each cross section should be represented by a single line feature without the hexagons shown on each end on the hardcopy map. The location and shape of the lines should depict as accurately as possible the position of the cross section used. This is a modified Standard DFIRM Database table that includes Standard DFIRM Database items and Enhanced Database items. All items after SOURCE_CIT are Enhanced. The Enhanced DFIRM Database must contain all modeled cross sections, whether they are printed on the FIRM or not.

Extensive information regarding the source data can be found in these two documents:
FEMA DFIRM Doc Appendix L Part A.pdf
FEMA DFIRM Doc Appendix L Part B.pdf

Map service that provides a legend for the FEMA National Flood Hazard Layer. Display this along with the FEMA NFHL tiled map service at https://tiles.arcgis.com/tiles/hGdibHYSPO59RG1h/arcgis/rest/services/FEMA_National_Flood_Hazard_Layer/MapServer (metadata at https://massgis.maps.arcgis.com/home/item.html?id=630c74171705455592a8fa947c3f849f), which, being a tiled service hosted at ArcGIS Online, does not have a legend associated with it when displayed in ArcGIS Online or ArcGIS for Desktop.

The National Flood Hazard Layer (NFHL) data incorporates all Flood Insurance Rate Map (FIRM) databases published by the Federal Emergency Management Agency (FEMA), and any Letters of Map Revision (LOMRs) that have been issued against those databases since their publication date. The FIRM Database is the digital, geospatial version of the flood hazard information shown on the published paper FIRMs. The FIRM Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance (or 100-year) flood event, the 0.2-percent-annual-chance (or 500-year) flood event, and areas of minimal flood risk. The FIRM Database is derived from Flood Insurance Studies (FISs), previously published FIRMs, flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by FEMA. The NFHL is available as State or US Territory data sets. Each State or Territory data set consists of all FIRM Databases and corresponding LOMRs available on the publication date of the data set. The specification for the horizontal control of FIRM Databases is consistent with those required for mapping at a scale of 1:12,000. This file is georeferenced to the Earth's surface using the Geographic Coordinate System (GCS) and North American Datum of 1983. Date of last data update: 2025-07-21 This is official RLIS data. Contact Person: Alicia Wood alicia.wood@oregonmetro.gov 503-813-7561 RLIS Metadata Viewer: https://gis.oregonmetro.gov/rlis-metadata/#/details/1756 RLIS Terms of Use: https://rlisdiscovery.oregonmetro.gov/pages/terms-of-use

This is an extract from the Official FEMA Data. For any questions about this data, go to https://www.fema.gov/faq-details/GIS-Data

This resource describes a dataset of gridded depth at horizontal resolution of 3 meters, published November 15, 2017, downloaded from FEMA [1] and hosted in this archive at the University of Texas Advanced Computing Center (TACC) [2].. The raster dataset is contained within an Esri ArcGIS geodatabase. This product utilized Triangulated Irregular Network (TIN) interpolation, four quality assurance measures (identifying dips, spikes, duplication, and inaccurate/unrealistic measurements). High Water Marks were obtained from the Harris County Flood Control District (HCFCD), US Geological Survey (USGS), and other inspection data. Elevation data comprised a mosaic of 3 meter resampled elevations from 1M & 3M LiDAR, and IFSAR data. One section of the IfSAR data was found to be erroneous, and replaced with a blended 10 meter section. [This description was in correspondence January 22, 2018, from Mark English, GeoSpatial Risk Analyst, FEMA Region VIII, Mitigation Division.]

A preliminary version of these depths dated September 10, 2017 can be viewed in a FEMA web map [3]. This web map shows a forecasted depth grid, based on National Weather Service (NWS) Advanced Hydrologic Prediction Service (AHPS) forecasted water levels.

See FEMA's Natural Hazard Risk Assessment Program (NHRAP) ftp site [4] for additional HWM-based depth grids and inundation polygons: - Harris County AOIs and Inundation Boundaries [5] - Harris County Depth Grids [6] - Aransas, Nueces, and San Patricio Coastal Depth Grids and Boundaries [7] FEMA notes on these Modeled Preliminary Observations: o Based on observed Water Levels at stream gauges interpolated along rivers, downsampled to 5m resolution DEM o Depth grids updated with new observed peak crest as they become available o Will include High Water Mark information as it becomes available o Extents validated with remote sensing o Use for determining damage levels on specific structures

See also FEMA's journal of mitigation planning and actions related to Harvey [8].

References and related links: [1] FEMA_Depths_3m_v3.zip (39 gb ftp download) [https://data.femadata.com/Region8/Mitigation/Data_Share/] [2] TACC 39gb wget or ftp download [https://web.corral.tacc.utexas.edu/nfiedata/Harvey/flood_data/FEMA_Harvey_Depths_3m.gdb.zip] [3] FEMA map viewer for Hurricane Harvey resources (flood depths is bottom selection in layers list) [https://fema.maps.arcgis.com/apps/webappviewer/index.html?id=50f21538c7bf4e08b9faab430bc237c9] [4] FEMA NHRAP ftp [https://data.femadata.com/FIMA/NHRAP/Harvey/] [5] [https://data.femadata.com/FIMA/NHRAP/Harvey/Harris_AOIandBoundaries.zip] [6] [https://data.femadata.com/FIMA/NHRAP/Harvey/Harris_Mosaic_dgft.zip] [7] [https://data.femadata.com/FIMA/NHRAP/Harvey/Rockport_DG_unclipped.zip] [8] Hurricane Harvey Mitigation Portfolio - FEMA map journal [https://fema.maps.arcgis.com/apps/MapJournal/index.html?appid=70204cf2762d45409553fd9642700b7f]