Use the app to find the downloadable area within Jackson County - 2 Foot Contour MapThe 2-foot Contour Map shows contours that were derived from several different LiDAR projects in the Rogue Valley over the last 10 years. The map can be used to both download and view the contour data. To use the map, search or zoom in to an address. When zoomed in to a specific scale, the map will change from the downloadable areas layer to 2-foot interval contour lines. The LiDAR Project Dates layer can be used to identify the date when the elevation was collected in an area. Please note that data is available only for the valley floor areas at this time.The 2ft contours were created from 1-meter pixel DEM and then cleaned to remove very small elevation changes and to create a smooth contour line. This information should not be used to create topographic surveys or other applications where the precise elevation of a location is required. For additional information on LiDAR in Oregon or to download the source data, please visit the DOGAMI Lidar Viewer.The downloadable data is a zipped ESRI Shapefile and is projected to Oregon State Plane South (Intl Feet) with NAD 1983 datum.

The map is designed to be used as a basemap by marine GIS professionals and as a reference map by anyone interested in ocean data. The basemap focuses on bathymetry. It also includes inland waters and roads, overlaid on land cover and shaded relief imagery.

Use the app to find the downloadable area within Jackson County - 2 Foot Contour MapThe 2-foot Contour Map shows contours that were derived from several different LiDAR projects in the Rogue Valley over the last 10 years. The map can be used to both download and view the contour data. To use the map, search or zoom in to an address. When zoomed in to a specific scale, the map will change from the downloadable areas layer to 2-foot interval contour lines. The LiDAR Project Dates layer can be used to identify the date when the elevation was collected in an area. Please note that data is available only for the valley floor areas at this time.The 2ft contours were created from 1-meter pixel DEM and then cleaned to remove very small elevation changes and to create a smooth contour line. This information should not be used to create topographic surveys or other applications where the precise elevation of a location is required. For additional information on LiDAR in Oregon or to download the source data, please visit the DOGAMI Lidar Viewer.The downloadable data is a zipped ESRI Shapefile and is projected to Oregon State Plane South (Intl Feet) with NAD 1983 datum.

Notice: this is not the latest Heat Island Severity image service.This layer contains the relative heat severity for every pixel for every city in the United States, including Alaska, Hawaii, and Puerto Rico. Heat Severity is a reclassified version of Heat Anomalies raster which is also published on this site. This data is generated from 30-meter Landsat 8 imagery band 10 (ground-level thermal sensor) from the summer of 2023.To explore previous versions of the data, visit the links below:Heat Severity - USA 2022Heat Severity - USA 2021Heat Severity - USA 2020Heat Severity - USA 2019Federal statistics over a 30-year period show extreme heat is the leading cause of weather-related deaths in the United States. Extreme heat exacerbated by urban heat islands can lead to increased respiratory difficulties, heat exhaustion, and heat stroke. These heat impacts significantly affect the most vulnerable—children, the elderly, and those with preexisting conditions.The purpose of this layer is to show where certain areas of cities are hotter than the average temperature for that same city as a whole. Severity is measured on a scale of 1 to 5, with 1 being a relatively mild heat area (slightly above the mean for the city), and 5 being a severe heat area (significantly above the mean for the city). The absolute heat above mean values are classified into these 5 classes using the Jenks Natural Breaks classification method, which seeks to reduce the variance within classes and maximize the variance between classes. Knowing where areas of high heat are located can help a city government plan for mitigation strategies.This dataset represents a snapshot in time. It will be updated yearly, but is static between updates. It does not take into account changes in heat during a single day, for example, from building shadows moving. The thermal readings detected by the Landsat 8 sensor are surface-level, whether that surface is the ground or the top of a building. Although there is strong correlation between surface temperature and air temperature, they are not the same. We believe that this is useful at the national level, and for cities that don’t have the ability to conduct their own hyper local temperature survey. Where local data is available, it may be more accurate than this dataset. Dataset SummaryThis dataset was developed using proprietary Python code developed at Trust for Public Land, running on the Descartes Labs platform through the Descartes Labs API for Python. The Descartes Labs platform allows for extremely fast retrieval and processing of imagery, which makes it possible to produce heat island data for all cities in the United States in a relatively short amount of time.What can you do with this layer?This layer has query, identify, and export image services available. Since it is served as an image service, it is not necessary to download the data; the service itself is data that can be used directly in any Esri geoprocessing tool that accepts raster data as input.In order to click on the image service and see the raw pixel values in a map viewer, you must be signed in to ArcGIS Online, then Enable Pop-Ups and Configure Pop-Ups.Using the Urban Heat Island (UHI) Image ServicesThe data is made available as an image service. There is a processing template applied that supplies the yellow-to-red or blue-to-red color ramp, but once this processing template is removed (you can do this in ArcGIS Pro or ArcGIS Desktop, or in QGIS), the actual data values come through the service and can be used directly in a geoprocessing tool (for example, to extract an area of interest). Following are instructions for doing this in Pro.In ArcGIS Pro, in a Map view, in the Catalog window, click on Portal. In the Portal window, click on the far-right icon representing Living Atlas. Search on the acronyms “tpl” and “uhi”. The results returned will be the UHI image services. Right click on a result and select “Add to current map” from the context menu. When the image service is added to the map, right-click on it in the map view, and select Properties. In the Properties window, select Processing Templates. On the drop-down menu at the top of the window, the default Processing Template is either a yellow-to-red ramp or a blue-to-red ramp. Click the drop-down, and select “None”, then “OK”. Now you will have the actual pixel values displayed in the map, and available to any geoprocessing tool that takes a raster as input. Below is a screenshot of ArcGIS Pro with a UHI image service loaded, color ramp removed, and symbology changed back to a yellow-to-red ramp (a classified renderer can also be used): A typical operation at this point is to clip out your area of interest. To do this, add your polygon shapefile or feature class to the map view, and use the Clip Raster tool to export your area of interest as a geoTIFF raster (file extension ".tif"). In the environments tab for the Clip Raster tool, click the dropdown for "Extent" and select "Same as Layer:", and select the name of your polygon. If you then need to convert the output raster to a polygon shapefile or feature class, run the Raster to Polygon tool, and select "Value" as the field.Other Sources of Heat Island InformationPlease see these websites for valuable information on heat islands and to learn about exciting new heat island research being led by scientists across the country:EPA’s Heat Island Resource CenterDr. Ladd Keith, University of ArizonaDr. Ben McMahan, University of Arizona Dr. Jeremy Hoffman, Science Museum of Virginia Dr. Hunter Jones, NOAA Daphne Lundi, Senior Policy Advisor, NYC Mayor's Office of Recovery and ResiliencyDisclaimer/FeedbackWith nearly 14,000 cities represented, checking each city's heat island raster for quality assurance would be prohibitively time-consuming, so Trust for Public Land checked a statistically significant sample size for data quality. The sample passed all quality checks, with about 98.5% of the output cities error-free, but there could be instances where the user finds errors in the data. These errors will most likely take the form of a line of discontinuity where there is no city boundary; this type of error is caused by large temperature differences in two adjacent Landsat scenes, so the discontinuity occurs along scene boundaries (see figure below). Trust for Public Land would appreciate feedback on these errors so that version 2 of the national UHI dataset can be improved. Contact Dale.Watt@tpl.org with feedback.

Use the app to find the downloadable area within Jackson County - 2 Foot Contour MapThe 2-foot Contour Map shows contours that were derived from several different LiDAR projects in the Rogue Valley over the last 10 years. The map can be used to both download and view the contour data. To use the map, search or zoom in to an address. When zoomed in to a specific scale, the map will change from the downloadable areas layer to 2-foot interval contour lines. The LiDAR Project Dates layer can be used to identify the date when the elevation was collected in an area. Please note that data is available only for the valley floor areas at this time.The 2ft contours were created from 1-meter pixel DEM and then cleaned to remove very small elevation changes and to create a smooth contour line. This information should not be used to create topographic surveys or other applications where the precise elevation of a location is required. For additional information on LiDAR in Oregon or to download the source data, please visit the DOGAMI Lidar Viewer.The downloadable data is a zipped ESRI Shapefile and is projected to Oregon State Plane South (Intl Feet) with NAD 1983 datum.

Mineral resource occurrence data covering the world, most thoroughly within the U.S. This database contains the records previously provided in the Mineral Resource Data System (MRDS) of USGS and the Mineral Availability System/Mineral Industry Locator System (MAS/MILS) originated in the U.S. Bureau of Mines, which is now part of USGS. The MRDS is a large and complex relational database developed over several decades by hundreds of researchers and reporters. While database records describe mineral resources worldwide, the compilation of information was intended to cover the United States completely, and its coverage of resources in other countries is incomplete. The content of MRDS records was drawn from reports previously published or made available to USGS researchers. Some of those original source materials are no longer available. The information contained in MRDS was intended to reflect the reports used as sources and is current only as of the date of those source reports. Consequently MRDS does not reflect up-to-date changes to the operating status of mines, ownership, land status, production figures and estimates of reserves and resources, or the nature, size, and extent of workings. Information on the geological characteristics of the mineral resource are likely to remain correct, but aspects involving human activity are likely to be out of date.

Poorman Creek 2ft Contours Use the app to find the downloadable area within Jackson County - 2 Foot Contour MapThe 2-foot Contour Map shows contours that were derived from several different LiDAR projects in the Rogue Valley over the last 10 years. The map can be used to both download and view the contour data. To use the map, search or zoom in to an address. When zoomed in to a specific scale, the map will change from the downloadable areas layer to 2-foot interval contour lines. The LiDAR Project Dates layer can be used to identify the date when the elevation was collected in an area. Please note that data is available only for the valley floor areas at this time.The 2ft contours were created from 1-meter pixel DEM and then cleaned to remove very small elevation changes and to create a smooth contour line. This information should not be used to create topographic surveys or other applications where the precise elevation of a location is required. For additional information on LiDAR in Oregon or to download the source data, please visit the DOGAMI Lidar Viewer.The downloadable data is a zipped ESRI Shapefile and is projected to Oregon State Plane South (Intl Feet) with NAD 1983 datum.

Use the app to find the downloadable area within Jackson County - 2 Foot Contour MapThe 2-foot Contour Map shows contours that were derived from several different LiDAR projects in the Rogue Valley over the last 10 years. The map can be used to both download and view the contour data. To use the map, search or zoom in to an address. When zoomed in to a specific scale, the map will change from the downloadable areas layer to 2-foot interval contour lines. The LiDAR Project Dates layer can be used to identify the date when the elevation was collected in an area. Please note that data is available only for the valley floor areas at this time.The 2ft contours were created from 1-meter pixel DEM and then cleaned to remove very small elevation changes and to create a smooth contour line. This information should not be used to create topographic surveys or other applications where the precise elevation of a location is required. For additional information on LiDAR in Oregon or to download the source data, please visit the DOGAMI Lidar Viewer.The downloadable data is a zipped ESRI Shapefile and is projected to Oregon State Plane South (Intl Feet) with NAD 1983 datum.

Use the app to find the downloadable area within Jackson County - 2 Foot Contour MapThe 2-foot Contour Map shows contours that were derived from several different LiDAR projects in the Rogue Valley over the last 10 years. The map can be used to both download and view the contour data. To use the map, search or zoom in to an address. When zoomed in to a specific scale, the map will change from the downloadable areas layer to 2-foot interval contour lines. The LiDAR Project Dates layer can be used to identify the date when the elevation was collected in an area. Please note that data is available only for the valley floor areas at this time.The 2ft contours were created from 1-meter pixel DEM and then cleaned to remove very small elevation changes and to create a smooth contour line. This information should not be used to create topographic surveys or other applications where the precise elevation of a location is required. For additional information on LiDAR in Oregon or to download the source data, please visit the DOGAMI Lidar Viewer.The downloadable data is a zipped ESRI Shapefile and is projected to Oregon State Plane South (Intl Feet) with NAD 1983 datum.

Abstract

This dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied.

This dataset was sourced from the Queensland Department of Natural Resources and Mines in 2012. Information provided by the Department describes the dataset as follows:

This data was originally provided on DVD and contains the converted shapefiles, layer files, raster images and project .mxd files used on the Queensland geology and structural framework map. The maps were done in ArcGIS 9.3.1 and the data stored in file geodatabases, topology created and validated. This provides greater data quality by performing topological validation on the feature's spatial relationships. For the purposes of the DVD, shapefiles were created from the file geodatabases and for MapInfo users MapInfo .tab and .wor files. The shapefiles on the DVD are a revision of the 1975 Queensland geology data, and are both are available for display, query and download on the department's online GIS application.

The Queensland geology map is a digital representation of the distribution or extent of geological units within Queensland. In the GIS, polygons have a range of attributes including unit name, type of unit, age, lithological description, dominant rock type, and an abbreviated symbol for use in labelling the polygons. The lines in this dataset are a digital representation of the position of the boundaries of geological units and other linear features such as faults and folds. The lines are attributed with a description of the type of line represented. Approximately 2000 rock units were grouped into the 250 map units in this data set. The digital data was generalised and simplified from the Department's detailed geological data and was captured at 1:500 000 scale for output at 1:2 000 000 scale.

In the ESRI version, a layer file is provided which presents the units in the colours and patterns used on the printed hard copy map. For Map Info users, a simplified colour palette is provided without patterns. However a georeferenced image of the hard copy map is included and can be displayed as a background in both Arc Map and Map Info.

The geological framework of Queensland is classified by structural or tectonic unit (provinces and basins) in which the rocks formed. These are referred to as basins (or in some cases troughs and depressions) where the original form and structure are still apparent. Provinces (and subprovinces) are generally older basins that have been strongly tectonised and/or metamorphosed so that the original basin extent and form are no longer preserved. Note that intrusive and some related volcanic rocks that overlap these provinces and basins have not been included in this classification. The map was compiled using boundaries modified and generalised from the 1:2 000 000 Queensland Geology map (2012). Outlines of subsurface basins are also shown and these are based on data and published interpretations from petroleum exploration and geophysical surveys (seismic, gravity and magnetics).

For the structural framework dataset, two versions are provided. In QLD_STRUCTURAL_FRAMEWORK, polygons are tagged with the name of the surface structural unit, and names of underlying units are imbedded in a text string in the HIERARCHY field. In QLD_STRUCTURAL_FRAMEWORK_MULTI_POLYS, the data is structured into a series of overlapping, multi-part polygons, one for each structural unit. Two layer files are provided with the ESRI data, one where units are symbolised by name. Because the dataset has been designed for units display in the order of superposition, this layer file assigns colours to the units that occur at the surface with concealed units being left uncoloured. Another layer file symbolises them by the orogen of which they are part. A similar set of palettes has been provided for Map Info.

Dataset History

Details on the source data can be found in the xml file associated with data layer.

Data in this release

*ESRI.shp and MapInfo .tab files of rock unit polygons and lines with associated layer attributes of Queensland geology

*ESRI.shp and MapInfo .tab files of structural unit polygons and lines with associated layer attributes of structural framework

*ArcMap .mxd and .lyr files and MapInfo .wor files containing symbology

*Georeferenced Queensland geology map, gravity and magnetic images

*Queensland geology map, structural framework and schematic diagram PDF files

*Data supplied in geographical coordinates (latitude/longitude) based on Geocentric Datum of Australia - GDA94

Accessing the data

Programs exist for the viewing and manipulation of the digital spatial data contained on this DVD. Accessing the digital datasets will require GIS software. The following GIS viewers can be downloaded from the internet. ESRI ArcExplorer can be found by a search of www.esriaustralia.com.au and MapInfo ProViewer by a search on www.pbinsight.com.au collectively ("the websites").

Metadata

Metadata is contained in .htm files placed in the root folder of each vector data folder. For ArcMap users metadata for viewing in ArcCatalog is held in an .xml file with each shapefile within the ESRI Shapefile folders.

Disclaimer

The State of Queensland is not responsible for the privacy practices or the content of the websites and makes no statements, representations, or warranties about the content or accuracy or completeness of, any information or products contained on the websites.

Despite our best efforts, the State of Queensland makes no warranties that the information or products available on the websites are free from infection by computer viruses or other contamination.

The State of Queensland disclaims all responsibility and all liability (including without limitation, liability in negligence) for all expenses, losses, damages and costs you might incur as a result of accessing the websites or using the products available on the websites in any way, and for any reason.

The State of Queensland has included the websites in this document as an information source only. The State of Queensland does not promote or endorse the websites or the programs contained on them in any way.

WARNING: The Queensland Government and the Department of Natural Resources and Mines accept no liability for and give no undertakings, guarantees or warranties concerning the accuracy, completeness or fitness for the purposes of the information provided. The consumer must take all responsible steps to protect the data from unauthorised use, reproduction, distribution or publication by other parties.

Please view the 'readme.html' and 'licence.html' file for further, more complete information

Dataset Citation

Geological Survey of Queensland (2012) Queensland geology and structural framework - GIS data July 2012. Bioregional Assessment Source Dataset. Viewed 07 December 2018, http://data.bioregionalassessments.gov.au/dataset/69da6301-04c1-4993-93c1-4673f3e22762.

The Unpublished Digital Geologic-GIS Map of Mount Desert Island and Vicinity, Acadia National Park, Maine is composed of GIS data layers and GIS tables in a 10.1 file geodatabase (acad_geology.gdb), a 10.1 ArcMap (.mxd) map document (acad_geology.mxd), individual 10.1 layer (.lyr) files for each GIS data layer, an ancillary map information document (acad_geology.pdf) which contains source map unit descriptions, as well as other source map text, figures and tables, metadata in FGDC text (.txt) and FAQ (.pdf) formats, and a GIS readme file (acad_geology_gis_readme.pdf). Please read the acad_geology_gis_readme.pdf for information pertaining to the proper extraction of the file geodatabase and other map files. To request GIS data in ESRI 10.1 shapefile format contact Stephanie O'Meara (stephanie.omeara@colostate.edu; see contact information below). The data is also available as a 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. Google Earth software is available for free at: http://www.google.com/earth/index.html. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: Maine Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (acad_geology_metadata.txt or acad_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:50,000 and United States National Map Accuracy Standards features are within (horizontally) 25.4 meters or 83.3 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm). The GIS data projection is NAD83, UTM Zone 19N, however, for the KML/KMZ format the data is projected upon export to WGS84 Geographic, the native coordinate system used by Google Earth. The data is within the area of interest of Acadia National Park.

This dataset contains files created, digitized, or georeferenced by Chris DeRolph for mapping the pre-urban renewal community within the boundaries of the Riverfront-Willow St. and Mountain View urban renewal projects in Knoxville TN. Detailed occupant information for properties within boundaries of these two urban renewal projects was extracted from the 1953 Knoxville City Directory. The year 1953 was chosen as a representative snapshot of the Black community before urban renewal projects were implemented. The first urban renewal project to be approved was the Riverfront-Willow Street project, which was approved in 1954 according to the University of Richmond Renewing Inequality project titled ‘Family Displacements through Urban Renewal, 1950-1966’ (link below in the 'Other shapefiles' section). For ArcGIS Online users, the shapefile and tiff layers are available in AGOL and can be found by clicking the ellipsis next to the layer name and selecting 'Show item details' for the layers in this webmap https://knoxatlas.maps.arcgis.com/apps/webappviewer/index.html?id=43a66c3cfcde4f5f8e7ab13af9bbcebecityDirectory1953 is a folder that contains:JPG images of 1953 City Directory for street segments within the urban renewal project boundaries; images collected at the McClung Historical CollectionTXT files of extracted text from each image that was used to join occupant information from directory to GIS address datashp is a folder that contains the following shapefiles:Residential:Black_owned_residential_1953.shp: residential entries in the 1953 City Directory identified as Black and property ownersBlack_rented_residential_1953.shp: residential entries in the 1953 City Directory identified as Black and non-owners of the propertyNon_Black_owned_residential_1953.shp: residential entries in the 1953 City Directory identified as property owners that were not listed as BlackNon_Black_rented_residential_1953.shp: residential entries in the 1953 City Directory not listed as Black or property ownersResidential shapefile attributes:cityDrctryString: full text string from 1953 City Directory entryfileName: name of TXT file that contains the information for the street segmentsOccupant: the name of the occupant listed in the City Directory, enclosed in square brackets []Number: the address number listed in the 1953 City DirectoryBlackOccpt: flag for whether the occupant was identified in the City Directory as Black, designated by the (c) or (e) character string in the cityDrctryString fieldOwnerOccpd: flag for whether the occupant was identified in the City Directory as the property owner, designated by the @ character in the cityDrctryString fieldUnit: unit if listed (e.g. Apt 1, 2d fl, b'ment, etc)streetName: street name in ~1953Lat: latitude coordinate in decimal degrees for the property locationLon: longitude coordinate in decimal degrees for the property locationrace_own: combines the BlackOccpt and OwnerOccpd fieldsmapLabel: combines the Number and Occupant fields for map labeling purposeslastName: occupant's last namelabelShort: combines the Number and lastName fields for map labeling purposesNon-residential:Black_nonResidential_1953.shp: non-residential entries in the 1953 City Directory listed as Black-occupiedNonBlack_nonResidential_1953.shp: non-residential entries in the 1953 City Directory not listed as Black-occupiedNon-residential shapefile attributes:cityDrctryString: full text string from 1953 City Directory entryfileName: name of TXT file that contains the information for the street segmentsOccupant: the name of the occupant listed in the City Directory, enclosed in square brackets []Number: the address number listed in the 1953 City DirectoryBlackOccpt: flag for whether the occupant was identified in the City Directory as Black, designated by the (c) or (e) character string in the cityDrctryString fieldOwnerOccpd: flag for whether the occupant was identified in the City Directory as the property owner, designated by the @ character in the cityDrctryString fieldUnit: unit if listed (e.g. Apt 1, 2d fl, b'ment, etc)streetName: street name in ~1953Lat: latitude coordinate in decimal degrees for the property locationLon: longitude coordinate in decimal degrees for the property locationNAICS6: 2022 North American Industry Classification System (NAICS) six-digit business code, designated by Chris DeRolph rapidly and without careful considerationNAICS6title: NAICS6 title/short descriptionNAICS3: 2022 North American Industry Classification System (NAICS) three-digit business code, designated by Chris DeRolph rapidly and without careful considerationNAICS3title: NAICS3 title/short descriptionflag: flags whether the occupant is part of the public sector or an NGO; a flag of '0' indicates the occupant is assumed to be a privately-owned businessrace_own: combines the BlackOccpt and OwnerOccpd fieldsmapLabel: combines the Number and Occupant fields for map labeling purposesOther shapefiles:razedArea_1972.shp: approximate area that appears to have been razed during urban renewal based on visual overlay of usgsImage_grayscale_1956.tif and usgsImage_colorinfrared_1972.tif; digitized by Chris DeRolphroadNetwork_preUrbanRenewal.shp: road network present in urban renewal area before razing occurred; removed attribute indicates whether road was removed or remains today; historically removed roads were digitized by Chris DeRolph; remaining roads sourced from TDOT GIS roads dataTheBottom.shp: the approximate extent of the razed neighborhood known as The Bottom; digitized by Chris DeRolphUrbanRenewalProjects.shp: boundaries of the East Knoxville urban renewal projects, as mapped by the University of Richmond's Digital Scholarship Lab https://dsl.richmond.edu/panorama/renewal/#view=0/0/1&viz=cartogram&city=knoxvilleTN&loc=15/35.9700/-83.9080tiff is a folder that contains the following images:streetMap_1952.tif: relevant section of 1952 map 'Knoxville Tennessee and Surrounding Area'; copyright by J.U.G. Rich and East Tenn Auto Club; drawn by R.G. Austin; full map accessed at McClung Historical Collection, 601 S Gay St, Knoxville, TN 37902; used as reference for street names in roadNetwork_preUrbanRenewal.shp; georeferenced by Chris DeRolphnewsSentinelRdMap_1958.tif: urban renewal area map from 1958 Knox News Sentinel article; used as reference for street names in roadNetwork_preUrbanRenewal.shp; georeferenced by Chris DeRolphusgsImage_grayscale_1956.tif: May 18, 1956 black-and-white USGS aerial photograph, georeferenced by Chris DeRolph; accessed here https://earthexplorer.usgs.gov/scene/metadata/full/5e83d8e4870f4473/ARA550590030582/usgsImage_colorinfrared_1972.tif: April 18, 1972 color infrared USGS aerial photograph, georeferenced by Chris DeRolph; accessed here https://earthexplorer.usgs.gov/scene/metadata/full/5e83d8e4870f4473/AR6197002600096/usgsImage_grayscale_1976.tif: November 8, 1976 black-and-white USGS aerial photograph, georeferenced by Chris DeRolph; accessed here https://earthexplorer.usgs.gov/scene/metadata/full/5e83d8e4870f4473/AR1VDUT00390010/

National Monuments Service - Archaeological Survey of Ireland. Published by Department of Housing, Local Government and Heritage. Available under the license Creative Commons Attribution 4.0 (CC-BY-4.0).This Archaeological Survey of Ireland dataset is published from the database of the National Monuments Service Sites and Monuments Record (SMR). This dataset also can be viewed and interrogated through the online Historic Environment Viewer: https://heritagedata.maps.arcgis.com/apps/webappviewer/index.html?id=0c9eb9575b544081b0d296436d8f60f8

A Sites and Monuments Record (SMR) was issued for all counties in the State between 1984 and 1992. The SMR is a manual containing a numbered list of certain and possible monuments accompanied by 6-inch Ordnance Survey maps (at a reduced scale). The SMR formed the basis for issuing the Record of Monuments and Places (RMP) - the statutory list of recorded monuments established under Section 12 of the National Monuments (Amendment) Act 1994. The RMP was issued for each county between 1995 and 1998 in a similar format to the existing SMR. The RMP differs from the earlier lists in that, as defined in the Act, only monuments with known locations or places where there are believed to be monuments are included.

The large Archaeological Survey of Ireland archive and supporting database are managed by the National Monuments Service and the records are continually updated and supplemented as additional monuments are discovered. On the Historic Environment viewer an area around each monument has been shaded, the scale of which varies with the class of monument. This area does not define the extent of the monument, nor does it define a buffer area beyond which ground disturbance should not take place – it merely identifies an area of land within which it is expected that the monument will be located. It is not a constraint area for screening – such must be set by the relevant authority who requires screening for their own purposes. This data has been released for download as Open Data under the DPER Open Data Strategy and is licensed for re-use under the Creative Commons Attribution 4.0 International licence. http://creativecommons.org/licenses/by/4.0

Please note that the centre point of each record is not indicative of the geographic extent of the monument. The existing point centroids were digitised relative to the OSI 6-inch mapping and the move from this older IG-referenced series to the larger-scale ITM mapping will necessitate revisions. The accuracy of the derived ITM co-ordinates is limited to the OS 6-inch scale and errors may ensue should the user apply the co-ordinates to larger scale maps. Records that do not refer to 'monuments' are designated 'Redundant record' and are retained in the archive as they may relate to features that were once considered to be monuments but which on investigation proved otherwise. Redundant records may also refer to duplicate records or errors in the data structure of the Archaeological Survey of Ireland.

This dataset is provided for re-use in a number of ways and the technical options are outlined below. For a live and current view of the data, please use the web services or the data extract tool in the Historic Environment Viewer. The National Monuments Service also provide an Open Data snapshot of its national dataset in CSV as a bulk data download. Users should consult the National Monument Service website https://www.archaeology.ie/ for further information and guidance on the National Monument Act(s) and the legal significance of this dataset.

Open Data Bulk Data Downloads (version date: 23/08/2023)

The Sites and Monuments Record (SMR) is provided as a national download in Comma Separated Value (CSV) format. This format can be easily integrated into a number of software clients for re-use and analysis. The Longitude and Latitude coordinates are also provided to aid its re-use in web mapping systems, however, the ITM easting/northings coordinates should be quoted for official purposes. ERSI Shapefiles of the SMR points and SMRZone polygons are also available The SMRZones represent an area around each monument, the scale of which varies with the class of monument. This area does not define the extent of the monument, nor does it define a buffer area beyond which ground disturbance should not take place – it merely identifies an area of land within which it is expected that the monument will be located. It is not a constraint area for screening – such must be set by the relevant authority who requires screening for their own purposes.

GIS Web Service APIs (live views):

For users with access to GIS software please note that the Archaeological Survey of Ireland data is also available spatial data web services. By accessing and consuming the web service users are deemed to have accepted the Terms and Conditions. The web services are available at the URL endpoints advertised below:

SMR; https://services-eu1.arcgis.com/HyjXgkV6KGMSF3jt/arcgis/rest/services/SMROpenData/FeatureServer

SMRZone; https://services-eu1.arcgis.com/HyjXgkV6KGMSF3jt/arcgis/rest/services/SMRZoneOpenData/FeatureServer

Historic Environment Viewer - Query Tool

The "Query" tool can alternatively be used to selectively filter and download the data represented in the Historic Environment Viewer. The instructions for using this tool in the Historic Environment Viewer are detailed in the associated Help file: https://www.archaeology.ie/sites/default/files/media/pdf/HEV_UserGuide_v01.pdf...

This map is designed to be used as a basemap by marine GIS professionals and as a reference map by anyone interested in ocean data. The basemap includes bathymetry, marine water body names, undersea feature names, and derived depth values in meters. Land features include administrative boundaries, cities, inland waters, roads, overlaid on land cover and shaded relief imagery.

The map was compiled from a variety of best available sources from several data providers, including General Bathymetric Chart of the Oceans GEBCO_08 Grid version 20100927 and IHO-IOC GEBCO Gazetteer of Undersea Feature Names August 2010 version (https://www.gebco.net), National Oceanic and Atmospheric Administration (NOAA) and National Geographic for the oceans; and DeLorme, HERE, and Esri for topographic content. The basemap was designed and developed by Esri.

The Ocean Basemap currently provides coverage for the world down to a scale of ~1:577k; coverage down to ~1:72k in United States coastal areas and various other areas; and coverage down to ~1:9k in limited regional areas. You can contribute your bathymetric data to this service and have it served by Esri for the benefit of the Ocean GIS community. For details, see the Community Maps Program.

Tip: Here are some famous oceanic locations as they appear in this map. Each URL below launches this map at a particular location via parameters specified in the URL: Challenger Deep, Galapagos Islands, Hawaiian Islands, Maldive Islands, Mariana Trench, Tahiti, Queen Charlotte Sound, Notre Dame Bay, Labrador Trough, New York Bight, Massachusetts Bay, Mississippi Sound

The USGS Elevation Contours service from The National Map (TNM) consists of contours generated for the conterminous United States from 1- and 1/3 arc-second elevation data. Small scale contours derived from 1 arc-second data are displayed at scales ranging from 1:577K to 1:72K in The National Map viewer. Contour intervals are 100 foot between 1:577K and 1:144K, and 50 foot at 1:72K. Large scale contours derived from 1/3 arc-second data are displayed at 1:50K (and larger). Large scale contour intervals are variable across the United States depending on complexity of topography. The National Map viewer allows free downloads of public domain contour data in either Esri File Geodatabase or Shapefile formats. The 3D Elevation Program (3DEP) provides elevation data for The National Map and basic elevation information for earth science studies and mapping applications. Scientists and resource managers use elevation data for global change research, hydrologic modeling, resource monitoring, mapping and visualization, and many other applications. For additional information on 3DEP, go to https://nationalmap.gov/3DEP/.

This map is one of a series of soil landscape maps that are intended for all of central and eastern NSW, based on standard 1:100,000 and 1:250,000 topographic sheets. The map provides an inventory of soil and landscape properties of the area and identifies major soil and landscape qualities and constraints. It integrates soil and topographic features into single units with relatively uniform land management requirements. Soils are described in terms of soil materials in addition to the Australian Great Soil Group and Northcote classification systems. Related Datasets: The dataset area is also covered by the mapping of the Soil and Land Resources of the Hawkesbury-Nepean Catchment, Acid Sulphate Soil Risk Mapping and Hydrogeological landscapes of NSW. Online Maps: This and related datasets can be viewed using eSPADE (NSW’s soil spatial viewer), which contains a suite of soil and landscape information including soil profile data. Many of these datasets have hot-linked soil reports. An alternative viewer is the SEED Map; an ideal way to see what other natural resources datasets (e.g. vegetation) are available for this map area. References: Chapman G.A., Murphy C.L., Tille P.J., Atkinson G. and Morse R.J., 2009, Soil Landscapes of the Sydney 1:100,000 Sheet map, Ed. 4, Department of Environment, Climate Change and Water, Sydney. Chapman G.A. and Murphy C.L., 1989, Soil Landscapes of the Sydney 1:100,000 Sheet report, Soil Conservation Service of NSW, Sydney. Data and Resources

This data set contains the Submerged Lands Act (SLA)boundary line (also known as the State Seaward Boundary (SSB) and Fed State Boundary) for the BOEM Pacific Region in ESRI ArcGIS shape file format. The SLA defines the seaward limit of a state owned submerged lands and the landward boundary of federally managed Outer Continental Shelf (OCS) lands. In the BOEM Pacific Region the SLA is projected 3 nautical miles offshore from the coastal baseline. Further information on the SLA and development of this line from baseline points can be found in OCS Report BOEM 99-0006: Boundary Development on the Outer Continental Shelf. The SLA boundary was developed using nautical charts, topographic maps, and hydrographic surveys to identify coastal baseline points. For California, there was a wide range of map scales used (1:200 – 1:100,000). The Minerals Management Service (MMS - the predecessor bureau to BOEM) used mapping software that was developed in-house to mathematically project the SLA boundary 3 nautical miles seaward from the baseline. For purposes of the SLA, all coordinates are assumed as absolute values with a precision of three decimals of a meter. For purposes other than the SLA, the actual positional precision for a scale of 1:40,000 is approximately 23 meters. In 1992, MMS adopted NADCON v.2.00 or better as the bureau standard horizontal datum transformation software, and reiterated that, for its purposes, “the World Geodetic System of 1984 (WGS 84) is considered equivalent to NAD 83 offshore of Alaska and the conterminous United States.” 57 Fed. Reg. 5168 (February 12, 1992). On December 24, 2014, the SLA boundary offshore of California was fixed (permanently immobilized) by a decree issued by the U.S. Supreme Court. United States v. California, 135 S. Ct. 563 (2014). For a detailed discussion on the fixing of the SLA boundary for California, please see http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Multi-Purpose-Marine-Cadastre-Map-Viewer/Court-Decisions.aspx Because GIS projection and topology functions can change or generalize coordinates, these GIS shape files are NOT an OFFICIAL record for the exact Submerged Lands Act Boundary.The official record is reflected through the coordinates listed in the decree, and the boundary shown on the BOEM Supplemental Official Block Diagrams, which are available at http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Pacific.aspx

This map and corresponding dataset provide the location, satellite images and square footage of existing green roofs within the City of Chicago. This dataset is in ESRI shapefile format. To view or use these files, compression software and special GIS software, such as ESRI ArcGIS, is required. This information is derived from an analysis of high-spatial resolution (50cm), pan-sharpened, ortho-rectified, 8-band multi-spectral satellite images collected by Digital Globe’s Worldview-2 satellite. The City supplied the consultant with a 2009 City boundary shapefile to determine the required extent of the imagery. Acquisition of three different strips of imagery corresponding to the satellite’s paths was required. These strips of imagery spanned three consecutive months and were collected in August 2010 (90% coverage), September 2010 (5% coverage) and October 2010 (5% coverage). The results of the analysis include overall count of vegetated roofs, their total square footage, and the ratio of required to elective vegetated roofs. A total of 359 vegetated roofs were identified within the City of Chicago. The total square footage of these vegetated roofs was calculated to be approximately 5,469,463 square feet. The ratio of required vegetated roofs to elective vegetative roofs was 297:62 (~5:1). The median size of the vegetated roofs was calculated to be 5,234 square feet.

Use the app to find the downloadable area within Jackson County - 2 Foot Contour MapThe 2-foot Contour Map shows contours that were derived from several different LiDAR projects in the Rogue Valley over the last 10 years. The map can be used to both download and view the contour data. To use the map, search or zoom in to an address. When zoomed in to a specific scale, the map will change from the downloadable areas layer to 2-foot interval contour lines. The LiDAR Project Dates layer can be used to identify the date when the elevation was collected in an area. Please note that data is available only for the valley floor areas at this time.The 2ft contours were created from 1-meter pixel DEM and then cleaned to remove very small elevation changes and to create a smooth contour line. This information should not be used to create topographic surveys or other applications where the precise elevation of a location is required. For additional information on LiDAR in Oregon or to download the source data, please visit the DOGAMI Lidar Viewer.The downloadable data is a zipped ESRI Shapefile and is projected to Oregon State Plane South (Intl Feet) with NAD 1983 datum.

The USGS Governmental Unit Boundaries service from The National Map (TNM) represents major civil areas for the Nation, including States or Territories, counties (or equivalents), Federal and Native American areas, congressional districts, minor civil divisions, incorporated places (such as cities and towns), and unincorporated places. Boundaries data are useful for understanding the extent of jurisdictional or administrative areas for a wide range of applications, including mapping or managing resources, and responding to natural disasters. Boundaries data also include extents of forest, grassland, park, wilderness, wildlife, and other reserve areas useful for recreational activities, such as hiking and backpacking. Boundaries data are acquired from a variety of government sources. The data represents the source data with minimal editing or review by USGS. Please refer to the feature-level metadata for information on the data source. The National Map boundaries data is commonly combined with other data themes, such as elevation, hydrography, structures, and transportation, to produce general reference base maps. The National Map viewer allows free downloads of public domain boundaries data in either Esri File Geodatabase or Shapefile formats. For additional information on the boundaries data model, go to https://nationalmap.gov/boundaries.html.