The modified BFEs and revised map panels are effective as of Sept. 29, 2017 and revise the FIRM that was in effect prior to that date. Four panels were revised Aug. 7, 2018 and have been included in the product. Four LOMR areas were included in Jan. 2020 and reflect changes ranging from Aug. 28, 2018 through Jan. 10, 2020.These files are digital copies of the flood risk maps for Volusia county in PDF file format. Flood zone boundaries and elevations depicted on these maps may be adjusted later. Additionally, FEMA may update the FIRMs at any time, which may not coincide with this file’s update cycle. To view the most up to date information, visit FEMA’s NFHL Viewer. The most recent official shapefiles can be downloaded from the FEMA Flood Map Service Center.A FIRM (also referred to as a flood map) is the official map that shows Special Flood Hazard Areas (SFHA) and the risk premium zones applicable to a community. Risk zones indicated on a FIRM provide a basis for establishing flood insurance coverage premium rates offered through the National Flood Insurance Program (NFIP).This dataset enables a visualization of the floodplain and floodway extents. Due to the nature of this data, often times ESRI generated base maps and flood data can potentially be misaligned, therefore actual flood extents may be misrepresented. This product is not intended to be used for regulatory purposes and should only be used as a planning and visualization tool.

The Flood Insurance Rate Map (FIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The FIRM Database is derived from Flood Insurance Studies (FISs), previously published FIRMs, flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). This file is georeferenced to the Earth's surface using the Geographic Coordinate System (GCS) and North American Datum of 1983.

This dataset contains data from the National Flood Hazard Layer, a GIS database of flood risks and regulatory flood determination data. Flood hazard and supporting data are developed using specifications for horizontal control consistent with 1:12,000–scale mapping. If you plan to display maps from the National Flood Hazard Layer with other map data for official purposes, ensure that the other information meets FEMA’s standards for map accuracy. The minimum horizontal positional accuracy for base map hydrographic and transportation features used with the NFHL is the NSSDA radial accuracy of 38 feet. USGS imagery and map services that meet this standard can be found by visiting the Knowledge Sharing Site (KSS) for Base Map Standards (420). Other base map standards can be found at http://pm.riskmapcds.com/kss/MapChanges/default.aspx. You will need a username and password to access this information. The NFHL data are from FEMA’s Flood Insurance Rate Map (FIRM) databases. New data are added continually. The NFHL also contains map changes to FIRM data made by Letters of Map Revision (LOMRs). The NFHL is stored in North American Datum of 1983, Geodetic Reference System 80 coordinate system, though many of the NFHL GIS web services support the Web Mercator Sphere projection commonly used in web mapping applications. This dataset displays FEMA's Flood Insurance Rate Map (FIRM) panels. The spatial entities representing FIRM panels are polygons. The polygon for the FIRM panel corresponds to the panel neatlines. Panel boundaries are generally derived from USGS DOQQ boundaries. As a result, the panels are generally rectangular. FIRM panels must not overlap or have gaps within a study. In situations where a portion of a panel lies outside the jurisdiction being mapped, the user must refer to the S_Pol_Ar table to determine the portion of the panel area where the FIRM Database shows the effective flood hazard data for the mapped jurisdiction. This information is needed for the FIRM Panel Index and the following tables in the FIS report: Listing of NFIP Jurisdictions, Levees, Incorporated Letters of Map Change, and Coastal Barrier Resources System Information.View Dataset on the Gateway

FEMA provides access to the National Flood Hazards Layer (NFHL) through web mapping services. The maps depict effective flood hazard information and supporting data. The primary flood hazard classification is indicated in the Flood Hazard Zones layer.The NFHL layers include:Flood hazard zones and labelsRiver Miles MarkersCross-sections and coastal transects and their labelsLetter of Map Revision (LOMR) boundaries and case numbersFlood Insurance Rate Map (FIRM) boundaries, labels and effective datesCoastal Barrier Resources System (CBRS) and Otherwise Protected Area (OPA) unitsCommunity boundaries and namesLeveesHydraulic and flood control structuresProfile and coastal transect baselinesLimit of Moderate Wave Action(LiMWA)Not all effective Flood Insurance Rate Maps (FIRM) have GIS data available. To view a list of available county and single-jurisdiction flood study data in GIS format and check the status of the NFHL GIS services, please visit the NFHL Status Page.Preliminary & Pending National Flood Hazard LayersThe Preliminary and Pending NFHL dataset represents the current pre-effective flood data for the country. These layers are updated as new preliminary and pending data becomes available, and data is removed from these layers as it becomes effective.For more information, please visit FEMA's website.To download map panels or GIS Data, go to: NFHL on FEMA GeoPlatform.Preliminary & Pending DataPreliminary data are for review and guidance purposes only. By viewing preliminary data and maps, the user acknowledges that the information provided is preliminary and subject to change. Preliminary data are not final and are presented in this national layer as the best information available at this time. Additionally, preliminary data cannot be used to rate flood insurance policies or enforce the Federal mandatory purchase requirement. FEMA will remove preliminary data once pending data are available.Pending data are for early awareness of upcoming changes to regulatory flood map information. Until the data becomes effective, when it will appear in FEMA's National Flood Hazard Layer (NFHL), the data should not be used to rate flood insurance policies or enforce the Federal mandatory purchase requirement. FEMA will remove pending data once effective data are available.To better understand Preliminary data please see the View Your Community's Preliminary Flood Hazard Data webpage.FEMA GeoPlatformFEMA's GIS flood map services are available through FEMAs GeoPlatform, an ArcGIS Online portal containing a variety of FEMA-related data.To view the NFHL on the FEMA GeoPlatform go to NFHL on FEMA GeoPlatform.To view the Preliminary and Pending national layers on the FEMA Geoplatform go to FEMA's Preliminary & Pending National Flood Hazard Layer.Technical InformationFlood hazard and supporting data are developed using specifications for horizontal control consistent with 1:12,000–scale mapping. If you plan to display maps from the NFHL with other map data for official purposes, ensure that the other information meets FEMA’s standards for map accuracy.The minimum horizontal positional accuracy for base map hydrographic and transportation features used with the NFHL is the NSSDA radial accuracy of 38 feet. United States Geological Survey (USGS) imagery and map services that meet this standard can be found by visiting the Knowledge Sharing Site (KSS) for Base Map Standards (420). Other base map standards can be found at https://riskmapportal.msc.fema.gov/kss/MapChanges/default.aspx. You will need a username and password to access this information.The NFHL data are from FEMA’s FIRM databases. New data are added continually. The NFHL also contains map changes to FIRM data made by LOMRs.The NFHL is stored in North American Datum of 1983, Geodetic Reference System 80 coordinate system, though many of the NFHL GIS web services support the Web Mercator Sphere projection commonly used in web mapping applications.Organization & DisplayThe NFHL is organized into many data layers. The layers display information at map scales appropriate for the data. A layer indicating the availability of NFHL data is displayed at map scales smaller than 1:250,000, regional overviews at map scales between 1:250,000 and 1:50,000, and detailed flood hazard maps at map scales of 1:50,000 and larger. The "Scalehint" item in the Capabilities file for the Web Map Service encodes the scale range for a layer.In addition, there are non-NFHL datasets provided in the GIS web services, such as information about the availability of flood data and maps, the national map panel scheme, and point locations for LOMA and LOMR-Fs. The LOMA are positioned less accurately than are the NFHL data.Layers in the public NFHL GIS services:Use the numbers shown below when referencing layers by number.0. NFHL Availability1. LOMRs2. LOMAs3. FIRM Panels4. Base Index5. PLSS6. Toplogical Low Confidence Areas7. River Mile Markers8. Datum Conversion Points9. Coastal Gages10. Gages11. Nodes12. High Water Marks13. Station Start Points14. Cross-Sections15. Coastal Transects16. Base Flood Elevations17. Profile Baselines18. Transect Baselines19. Limit of Moderate Wave Action20. Water Lines21. Coastal Barrier Resources System Area22. Political Jurisdictions23. Levees24. General Structures25. Primary Frontal Dunes26. Hydrologic Reaches27. Flood Hazard Boundaries28. Flood Hazard Zones29. Submittal Information30. Alluvial Fans31. Subbasins32. Water Areas

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). In addition to the preceding, required text, the Abstract should also describe the projection and coordinate system as well as a general statement about horizontal accuracy.

The National Flood Hazard Layer (NFHL) is a geospatial database that contains current effective flood hazard data. FEMA provides the flood hazard data to support the National Flood Insurance Program. You can use the information to better understand your level of flood risk and type of flooding.The NFHL is made from effective flood maps and Letters of Map Change (LOMC) delivered to communities. NFHL digital data covers over 90 percent of the U.S. population. New and revised data is being added continuously. If you need information for areas not covered by the NFHL data, there may be other FEMA products which provide coverage for those areas.In the NFHL Viewer, you can use the address search or map navigation to locate an area of interest and the NFHL Print Tool to download and print a full Flood Insurance Rate Map (FIRM) or FIRMette (a smaller, printable version of a FIRM) where modernized data exists. Technical GIS users can also utilize a series of dedicated GIS web services that allow the NFHL database to be incorporated into websites and GIS applications. For more information on available services, go to the NFHL GIS Services User Guide.You can also use the address search on the FEMA Flood Map Service Center (MSC) to view the NFHL data or download a FIRMette. Using the “Search All Products” on the MSC, you can download the NFHL data for a County or State in a GIS file format. This data can be used in most GIS applications to perform spatial analyses and for integration into custom maps and reports. To do so, you will need GIS or mapping software that can read data in shapefile format.FEMA also offers a download of a KMZ (keyhole markup file zipped) file, which overlays the data in Google Earth™. For more information on using the data in Google Earth™, please see Using the National Flood Hazard Layer Web Map Service (WMS) in Google Earth™.

This dataset comes from the FEMA S_Fld_Haz_Ar table. The S_Fld_Haz_Ar table contains information about the flood hazards within the flood risk project area. A spatial file with location information also corresponds with this data table. These zones are used by FEMA to designate the SFHA and for insurance rating purposes. These data are the regulatory flood zones designated by FEMA. A spatial file with location information also corresponds with this data table.This information is needed for the following tables in the FIS report: Flooding Sources Included in this FIS report, and Summary of Hydrologic and Hydraulic Analyses.The spatial elements representing the flood zones are polygons. The entire area of the jurisdiction(s) mapped by the FIRM should have a corresponding flood zone polygon. There is one polygon for each contiguous flood zone designated.FEMA Regulatory Floodway are flood zone polygons marked as a regulatory floodway.FEMA 100 year are flood zone polygons where there is a 1% Annual Chance, also known as the 100 year.FEMA 500 year are flood zone polygons where there is a 0.2% Annual Chance, also known as the 500 year.FEMA minimal flood hazard zone polygons.This map is not intended for insurance rating purposes and is for information only. This map is a representation and approximation of the relative location of geographic information, land marks and physical addresses. The map may not be 100% accurate in locating your address. The floodplains shown on this mapping tool are those delineated on the Federal Emergency Management Agency’s (FEMA) Digital Flood Insurance Rate Map (DFIRM or floodplain map) for Montgomery County. This map is not an official FEMA Digital Flood Insurance Rate Map. The effective DFIRMs are produced, maintained, and published by FEMA and not by Montgomery County. Official determinations are provided by FEMA.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth?s surface using the State Plane coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

https://www.fema.gov/glossary/floodwayQuery to show only regulatory floodways. Up to date with known FIRM / Flood Zones as of 05/08/2024.Floodway = "Regulatory Floodway"

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). In addition to the preceding, required text, the Abstract should also describe the projection and coordinate system as well as a general statement about horizontal accuracy.

The Floodplain Mapping/Redelineation study deliverables depict and quantify the flood risks for the study area. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The Floodplain Mapping/Redelineation flood risk boundaries are derived from the engineering information, Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA).

The FEMA Flood Hazard Layer represents the location and attributes of flood insurance risk zones from the Flood Insurance Rate Map (FIRM) databases published by the Federal Emergency Management Agency (FEMA), and any Letters of Map Revision (LOMRs) that have been issued against those databases since their publication date. It is updated on a monthly basis.

The FIRM Database is the digital, geospatial version of the flood hazard information shown on the published paper FIRMs. The FIRM Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk.

The floodway, 100-year floodplain/SFHA (Special Flood Hazard Area), and the 500-year floodplain are all derived from this dataset.--Additional Information: Category: Hazard Purpose: The FIRM is the basis for floodplain management, mitigation, and insurance activities for the National Flood Insurance Program (NFIP). Insurance applications include enforcement of the mandatory purchase requirement of the Flood Disaster Protection Act, which "... requires the purchase of flood insurance by property owners who are being assisted by Federal programs or by Federally supervised, regulated or insured agencies or institutions in the acquisition or improvement of land facilities located or to be located in identified areas having special flood hazards, " Section 2 (b) (4) of the Flood Disaster Protection Act of 1973. In addition to the identification of Special Flood Hazard Areas (SFHAs), the risk zones shown on the FIRMs are the basis for the establishment of premium rates for flood coverage offered through the NFIP. The FIRM Database presents the flood risk information depicted on the FIRM in a digital format suitable for use in electronic mapping applications. The FIRM Database serves to archive the information collected during the Flood Risk Project. Update Frequency: As needed-- Metadata Link: https://www.portlandmaps.com/metadata/index.cfm?&action=DisplayLayer&LayerID=54347

Description

In support of the National Flood Insurance Program NFIP, Federal Emergency Management Agency (FEMA) has undertaken an effort of flood hazard identification and mapping to update Flood Insurance Rate Maps (FIRMs) for MARTIN County.

View Existing and Proposed Flood Map Information Using An Interactive Mapping Application.

Contact Information

Martin County Engineering Dept. CALL CENTER (772) 219-4945 Email: floodmap@martin.fl.us

FEMA Map Assistance 1-877-FEMA-MAP or (1-877-336-2627) Email: FEMAMapSpecialist@mapmodteam.com

Addtional Information

View the preliminary maps now on the FEMA website

https://hazards.fema.gov/femaportal/prelimdownload

For general information about the preliminary flood hazard data, please visit

https://www.fema.gov/pr eliminaryfloodhazarddata

Martin County’s website provides details and a host of project informationAdditional Flood Zone Information

Open

Click Here to Open Web Map

2017 FEMA Flood Zone for Macon-Bibb County. Through FEMA's flood hazard mapping program, Risk Mapping, Assessment and Planning (MAP), FEMA identifies flood hazards, assesses flood risks and partners with states and communities to provide accurate flood hazard and risk data to guide them to mitigation actions. Flood hazard mapping is an important part of the National Flood Insurance Program (NFIP), as it is the basis of the NFIP regulations and flood insurance requirements. FEMA maintains and updates data through Flood Insurance Rate Maps (FIRMs) and risk assessments. FIRMs include statistical information such as data for river flow, storm tides, hydrologic/hydraulic analyses and rainfall and topographic surveys. For more information regarding FEMA's flood hazard mapping program visit https://www.fema.gov/national-flood-insurance-program-flood-hazard-mapping.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA).The file is georeferenced to earth's surface using the State Plane projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

The Federal Emergency Management Agency (FEMA) creates and provides authoritative data related to flood insurance. Using that data, the Los Angeles County Department of Public Works has developed a public-facing web viewer for accessing flood zone information in the County of Los Angeles (Flood Zone Determination Website). Flood Zones are represented by letters for special flood hazard areas by FEMA. For example, Zone A areas have a 1 percent annual chance of flooding. This flood is also called the 100-year flood. Property owners with structures in Flood Zone A, which have a federally backed mortgage are required to obtain flood insurance.

Looking for more than just a current flood map? Visit Search All Products to access the FEMA website and obtain a full range of flood risk products for your community.

Purpose:

To provide flood zone information to the public.

Supplemental Information:

Data from Flood Insurance Rate Maps (FIRMs), where available digitally, can be found on the official FEMA’s National Flood Hazard Layer. The DFIRM Database is the digital, geospatial version of the flood hazard information shown on the published paper Flood Insurance Rate Maps (FIRMs) FEMA Flood Maps can be obtained from the FEMA Flood Map Service Center (MSC) The National Flood Hazard Layer (NFHL) is a digital database that contains flood hazard mapping data from FEMAs National Flood Insurance Program (NFIP). This map data is derived from Flood Insurance Rate Map (FIRM) databases and Letters of Map Revision (LOMRs). The NFHL is for community officials and members looking to view effective regulatory flood hazard information in a Geographic Information Systems (GIS) application.

FEMA has additional information on the National Flood Insurance Program and Flood Hazard Mapping.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the State Plane projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12000.

The National Flood Hazard Layer (NFHL) data incorporates all Flood Insurance Rate Map (FIRM) databases published by the Federal Emergency Management Agency (FEMA), and any Letters Of Map Revision (LOMRs) that have been issued against those databases since their publication date. It is updated on a monthly basis. The FIRM Database is the digital, geospatial version of the flood hazard information shown on the published paper FIRMs.The FIRM Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The FIRM Database is derived from Flood Insurance Studies (FISs), previously published FIRMs, flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by FEMA.The NFHL is available as State or US Territory data sets. Each State or Territory data set consists of all FIRM Databases and corresponding LOMRs available on the publication date of the data set.The specification for the horizontal control of FIRM Databases is consistent with those required for mapping at a scale of 1:12,000. This file is georeferenced to the Earth's surface using the Geographic Coordinate System (GCS) and North American Dataum of 1983 (NSRS-2007).

Polygon file of the FEMA Flood Insurance Rate Map for New York City.