Map InformationThis nowCOAST updating map service provides maps depicting visible, infrared, and water vapor imagery composited from NOAA/NESDIS GOES-EAST and GOES-WEST. The horizontal resolutions of the IR, visible, and water vapor composite images are approximately 1km, 4km, and 4km, respectively. The visible and IR imagery depict the location of clouds. The water vapor imagery indicates the amount of water vapor contained in the mid to upper levels of the troposphere. The darker grays indicate drier air while the brighter grays/whites indicates more saturated air. The GOES composite imagers are updated in the nowCOAST map service every 30 minutes. For more detailed information about the update schedule, see: http://new.nowcoast.noaa.gov/help/#section=updatescheduleBackground InformationThe GOES map layer displays visible (VIS) and infrared (IR4) cloud, and water vapor (WV) imagery from the NOAA/ National Environmental Satellite, Data, and Information Service (NESDIS) Geostationary Satellites (GOES-East and GOES-West). These satellites circle the Earth in a geosynchronous orbit (i.e. orbit the equatorial plane of the Earth at a speed matching the rotation of the Earth). This allows the satellites to hover continuously over one position on the surface. The geosynchronous plane is about 35,800 km (22,300 miles) above the Earth which is high enough to allow the satellites a full-disc view of the Earth. GOES-East is positioned at 75 deg W longitude and the equator. GOES-West is located at 135 deg W and the equator. The two satellites cover an area from 20 deg W to 165 deg E. The images are derived from data from GOES' Imagers. An imager is a multichannel instrument that senses radiant energy and reflected solar energy from the Earth's surface and atmosphere. The VIS, IR4, and WV images are obtained from GOES Imager Channels 1, 4, and 3, respectively. The GOES raster images are obtained from NESDIS servers in geo-referenced Tagged-Image File Format (geoTIFF).Time InformationThis map is time-enabled, meaning that each individual layer contains time-varying data and can be utilized by clients capable of making map requests that include a time component.This particular service can be queried with or without the use of a time component. If the time parameter is specified in a request, the data or imagery most relevant to the provided time value, if any, will be returned. If the time parameter is not specified in a request, the latest data or imagery valid for the present system time will be returned to the client. If the time parameter is not specified and no data or imagery is available for the present time, no data will be returned.In addition to ArcGIS Server REST access, time-enabled OGC WMS 1.3.0 access is also provided by this service.Due to software limitations, the time extent of the service and map layers displayed below does not provide the most up-to-date start and end times of available data. Instead, users have three options for determining the latest time information about the service:Issue a returnUpdates=true request for an individual layer or for the service itself, which will return the current start and end times of available data, in epoch time format (milliseconds since 00:00 January 1, 1970). To see an example, click on the "Return Updates" link at the bottom of this page under "Supported Operations". Refer to the ArcGIS REST API Map Service Documentation for more information.Issue an Identify (ArcGIS REST) or GetFeatureInfo (WMS) request against the proper layer corresponding with the target dataset. For raster data, this would be the "Image Footprints with Time Attributes" layer in the same group as the target "Image" layer being displayed. For vector (point, line, or polygon) data, the target layer can be queried directly. In either case, the attributes returned for the matching raster(s) or vector feature(s) will include the following:validtime: Valid timestamp.starttime: Display start time.endtime: Display end time.reftime: Reference time (sometimes reffered to as issuance time, cycle time, or initialization time).projmins: Number of minutes from reference time to valid time.desigreftime: Designated reference time; used as a common reference time for all items when individual reference times do not match.desigprojmins: Number of minutes from designated reference time to valid time.Query the nowCOAST LayerInfo web service, which has been created to provide additional information about each data layer in a service, including a list of all available "time stops" (i.e. "valid times"), individual timestamps, or the valid time of a layer's latest available data (i.e. "Product Time"). For more information about the LayerInfo web service, including examples of various types of requests, refer to the nowCOAST help documentation at: http://new.nowcoast.noaa.gov/help/#section=layerinfoReferencesNOAA, 2013: Geostationary Operational Environmental Satellites (GOES). (Available at http://www.ospo.noaa.gov/Operations/GOES/index.html)A Basic Introduction to Water Vapor Imagery. (Available at http://cimss.ssec.wisc.edu/goes/misc/wv/wv_intro.html)CIMSS, 1996: Water Vapor Imagery Tutorial (Available at http://cimss.ssec.wisc.edu/goes/misc/wv/)

This data set consists of general soil association units. It was developed by the National Cooperative Soil Survey and supersedes the State Soil Geographic (STATSGO) data set published in 1994. It consists of a broad based inventory of soils and nonsoil areas that occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. The data set was created by generalizing more detailed soil survey maps. Where more detailed soil survey maps were not available, data on geology, topography, vegetation, and climate were assembled, together with Land Remote Sensing Satellite (LANDSAT) images. Soils of like areas were studied, and the probable classification and extent of the soils were determined.

Map unit composition was determined by transecting or sampling areas on the more detailed maps and expanding the data statistically to characterize the whole map unit.

This data set consists of georeferenced vector digital data and tabular digital data. The map data were collected in 1-by 2-degree topographic quadrangle units and merged into a seamless national data set. It is distributed in state/territory and national extents. The soil map units are linked to attributes in the National Soil Information System data base which gives the proportionate extent of the component soils and their properties.

MnGeo adapted the NRCS metadata record to create this record.

The Aggregate Resource Mapping Program (ARMP) began in 1984 when the Minnesota Legislature passed a law (Minnnesota Statutes, section 84.94) to:
- Identify and classify aggregate resources outside of the Twin Cities metropolitan area;
- Give aggregate resource information to local units of government and others for making comprehensive land-use and zoning plans;
- Introduce aggregate resource protection; and Promote orderly and environmentally sound development of the resource.

Provided here is a compilation of GIS data produced by the DNR's Aggregate Resource Mapping Program. Also provided is the aggregate resource GIS data from the 7-County Metropolitan Area mapped by the Minnesota Geological Survey (MGS). Please see the layer-specific metadata for each of the 9 layers for more details:

ARMP:
Compilation of Gravel Pits, Quarries, and Prospects
Compilation of Crushed Stone Resource Potential
Compilation of Geologic Field Observations
Compilation of Sand and Gravel Resource Potential
Compilation of DNR Test Holes
Status Map

7-County Metro Area:
Compilation of Pits and Quarries
Bedrock Aggregate Sources
Sand and Gravel Sources

This application is intended for informational purposes only and is not an operational product. The tool provides the capability to access, view and interact with satellite imagery, and shows the latest view of Earth as it appears from space.For additional imagery from NOAA's GOES East and GOES West satellites, please visit our Imagery and Data page or our cooperative institute partners at CIRA and CIMSS.This website should not be used to support operational observation, forecasting, emergency, or disaster mitigation operations, either public or private. In addition, we do not provide weather forecasts on this site — that is the mission of the National Weather Service. Please contact them for any forecast questions or issues. Using the Maps​What does the Layering Options icon mean?The Layering Options widget provides a list of operational layers and their symbols, and allows you to turn individual layers on and off. The order in which layers appear in this widget corresponds to the layer order in the map. The top layer ‘checked’ will indicate what you are viewing in the map, and you may be unable to view the layers below.Layers with expansion arrows indicate that they contain sublayers or subtypes.What does the Time Slider icon do?The Time Slider widget enables you to view temporal layers in a map, and play the animation to see how the data changes over time. Using this widget, you can control the animation of the data with buttons to play and pause, go to the previous time period, and go to the next time period.Do these maps work on mobile devices and different browsers?Yes!Why are there black stripes / missing data on the map?NOAA Satellite Maps is for informational purposes only and is not an operational product; there are times when data is not available.Why does the imagery load slowly?This map viewer does not load pre-generated web-ready graphics and animations like many satellite imagery apps you may be used to seeing. Instead, it downloads geospatial data from our data servers through a Map Service, and the app in your browser renders the imagery in real-time. Each pixel needs to be rendered and geolocated on the web map for it to load.How can I get the raw data and download the GIS World File for the images I choose?The geospatial data Map Service for the NOAA Satellite Maps GOES satellite imagery is located on our Satellite Maps ArcGIS REST Web Service ( available here ).We support open information sharing and integration through this RESTful Service, which can be used by a multitude of GIS software packages and web map applications (both open and licensed).Data is for display purposes only, and should not be used operationally.Are there any restrictions on using this imagery?NOAA supports an open data policy and we encourage publication of imagery from NOAA Satellite Maps; when doing so, please cite it as "NOAA" and also consider including a permalink (such as this one) to allow others to explore the imagery.For acknowledgment in scientific journals, please use:We acknowledge the use of imagery from the NOAA Satellite Maps application: LINKThis imagery is not copyrighted. You may use this material for educational or informational purposes, including photo collections, textbooks, public exhibits, computer graphical simulations and internet web pages. This general permission extends to personal web pages. About this satellite imageryWhat am I looking at in these maps?In this map you are seeing the past 24 hours (updated approximately every 10 minutes) of the Western Hemisphere and Pacific Ocean, as seen by the NOAA GOES East (GOES-16) and GOES West (GOES-18) satellites. In this map you can also view four different ‘layers’. The views show ‘GeoColor’, ‘infrared’, and ‘water vapor’.This maps shows the coverage area of the GOES East and GOES West satellites. GOES East, which orbits the Earth from 75.2 degrees west longitude, provides a continuous view of the Western Hemisphere, from the West Coast of Africa to North and South America. GOES West, which orbits the Earth at 137.2 degrees west longitude, sees western North and South America and the central and eastern Pacific Ocean all the way to New Zealand.What does the GOES GeoColor imagery show?The 'Merged GeoColor’ map shows the coverage area of the GOES East and GOES West satellites and includes the entire Western Hemisphere and most of the Pacific Ocean. This imagery uses a combination of visible and infrared channels and is updated approximately every 15 minutes in real time. GeoColor imagery approximates how the human eye would see Earth from space during daylight hours, and is created by combining several of the spectral channels from the Advanced Baseline Imager (ABI) – the primary instrument on the GOES satellites. The wavelengths of reflected sunlight from the red and blue portions of the spectrum are merged with a simulated green wavelength component, creating RGB (red-green-blue) imagery. At night, infrared imagery shows high clouds as white and low clouds and fog as light blue. The static city lights background basemap is derived from a single composite image from the Visible Infrared Imaging Radiometer Suite (VIIRS) Day Night Band. For example, temporary power outages will not be visible. Learn more.What does the GOES infrared map show?The 'GOES infrared' map displays heat radiating off of clouds and the surface of the Earth and is updated every 15 minutes in near real time. Higher clouds colorized in orange often correspond to more active weather systems. This infrared band is one of 12 channels on the Advanced Baseline Imager, the primary instrument on both the GOES East and West satellites. on the GOES the multiple GOES East ABI sensor’s infrared bands, and is updated every 15 minutes in real time. Infrared satellite imagery can be "colorized" or "color-enhanced" to bring out details in cloud patterns. These color enhancements are useful to meteorologists because they signify “brightness temperatures,” which are approximately the temperature of the radiating body, whether it be a cloud or the Earth’s surface. In this imagery, yellow and orange areas signify taller/colder clouds, which often correlate with more active weather systems. Blue areas are usually “clear sky,” while pale white areas typically indicate low-level clouds. During a hurricane, cloud top temperatures will be higher (and colder), and therefore appear dark red. This imagery is derived from band #13 on the GOES East and GOES West Advanced Baseline Imager.How does infrared satellite imagery work?The infrared (IR) band detects radiation that is emitted by the Earth’s surface, atmosphere and clouds, in the “infrared window” portion of the spectrum. The radiation has a wavelength near 10.3 micrometers, and the term “window” means that it passes through the atmosphere with relatively little absorption by gases such as water vapor. It is useful for estimating the emitting temperature of the Earth’s surface and cloud tops. A major advantage of the IR band is that it can sense energy at night, so this imagery is available 24 hours a day.What do the colors on the infrared map represent?In this imagery, yellow and orange areas signify taller/colder clouds, which often correlate with more active weather systems. Blue areas are clear sky, while pale white areas indicate low-level clouds, or potentially frozen surfaces. Learn more about this weather imagery.What does the GOES water vapor map layer show?The GOES ‘water vapor’ map displays the concentration and location of clouds and water vapor in the atmosphere and shows data from both the GOES East and GOES West satellites. Imagery is updated approximately every 15 minutes in real time. Water vapor imagery, which is useful for determining locations of moisture and atmospheric circulations, is created using a wavelength of energy sensitive to the content of water vapor in the atmosphere. In this imagery, green-blue and white areas indicate the presence of high water vapor or moisture content, whereas dark orange and brown areas indicate little or no moisture present. This imagery is derived from band #10 on the GOES East and GOES West Advanced Baseline Imager.What do the colors on the water vapor map represent?In this imagery, green-blue and white areas indicate the presence of high water vapor or moisture content, whereas dark orange and brown areas indicate less moisture present. Learn more about this water vapor imagery.About the satellitesWhat are the GOES satellites?NOAA’s most sophisticated Geostationary Operational Environmental Satellites (GOES), known as the GOES-R Series, provide advanced imagery and atmospheric measurements of Earth’s Western Hemisphere, real-time mapping of lightning activity, and improved monitoring of solar activity and space weather.The first satellite in the series, GOES-R, now known as GOES-16, was launched in 2016 and is currently operational as NOAA’s GOES East satellite. In 2018, NOAA launched another satellite in the series, GOES-T, which joined GOES-16 in orbit as GOES-18. GOES-17 became operational as GOES West in January 2023.Together, GOES East and GOES West provide coverage of the Western Hemisphere and most of the Pacific Ocean, from the west coast of Africa all the way to New Zealand. Each satellite orbits the Earth from about 22,200 miles away.

Registered scans of the maps from the Language Atlas of the Pacific Area (excluding the maps of Japan) are made available through the Electronic Cultural Atlas Initiative (ECAI) Metadata Clearinghouse as a result of cooperation between Academia Sinica and the ECAI Austronesian Atlas Team led by David Blundell and Lawrence Crissman. The Australian Academy of the Humanities, which owns the copyright to the available maps, has graciously permitted their reproduction and distribution in this digital format, and we are grateful for their support. Any public use of the maps should acknowledge their source and copyright ownership.

This web map references the live tiled map service from the OpenStreetMap project. OpenStreetMap (OSM) is an open collaborative project to create a free editable map of the world. Volunteers gather location data using GPS, local knowledge, and other free sources of information such as free satellite imagery, and upload it. The resulting free map can be viewed and downloaded from the OpenStreetMap server: http://www.OpenStreetMap.org. See that website for additional information about OpenStreetMap. It is made available as a basemap for GIS work in Esri products under a Creative Commons Attribution-ShareAlike license.Tip: This service is one of the basemaps used in the ArcGIS.com map viewer and ArcGIS Explorer Online. Simply click one of those links to launch the interactive application of your choice, and then choose Open Street Map from the Basemap control to start using this service. You'll also find this service in the Basemap gallery in ArcGIS Explorer Desktop and ArcGIS Desktop 10.

GOES-16 (G16) is the first satellite in the US NOAA third generation of Geostationary Operational Environmental Satellites (GOES), a.k.a. GOES-R series (which will also include -S, -T, and -U). G16 was launched on 19 Nov 2016 and initially placed in an interim position at 89.5-deg W, between GOES-East and -West. Upon completion of Cal/Val in Dec 2018, it was moved to its permanent position at 75.2-deg W, and declared NOAA operational GOES-East on 18 Dec 2018. NOAA is responsible for all GOES-R products, including Sea Surface Temperature (SST) from the Advanced Baseline Imager (ABI). The ABI offers vastly enhanced capabilities for SST retrievals, over the heritage GOES-I/P Imager, including five narrow bands (centered at 3.9, 8.4, 10.3, 11.2, and 12.3 um) out of 16 that can be used for SST, as well as accurate sensor calibration, image navigation and co-registration, spectral fidelity, and sophisticated pre-processing (geo-rectification, radiance equalization, and mapping). From altitude 35,800 km, G16/ABI can accurately map SST in a Full Disk (FD) area from 15-135-deg W and 60S-60N, with spatial resolution 2km at nadir (degrading to 15km at view zenith angle, 67-deg) and temporal sampling of 10min (15min prior to 2 Apr 2019). The Level 2 Preprocessed (L2P) SST product is derived at the native sensor resolution using NOAA Advanced Clear-Sky Processor for Ocean (ACSPO) system. ACSPO first processes every 10min FD data SSTs are derived from BTs using the ACSPO clear-sky mask (ACSM; Petrenko et al., 2010) and Non-Linear SST (NLSST) algorithm (Petrenko et al., 2014). Currently, only 4 longwave bands centered at 8.4, 10.3, 11.2, and 12.3 um are used (the 3.9 microns was initially excluded, to minimize possible discontinuities in the diurnal cycle). The regression is tuned against quality controlled in situ SSTs from drifting and tropical mooring buoys in the NOAA iQuam system (Xu and Ignatov, 2014). The 10-min FD data are subsequently collated in time, to produce 1-hr L2P product, with improved coverage, and reduced cloud leakages and image noise, compared to each individual 10min image. In the collated L2P, SSTs and BTs are only reported in clear-sky water pixels (defined as ocean, sea, lake or river, and up to 5 km inland) and fill values elsewhere. The L2P is reported in netCDF4 GHRSST Data Specification version 2 (GDS2) format, 24 granules per day, with a total data volume of 0.6GB/day. In addition to SST, ACSPO files also include sun-sensor geometry, four BTs in ABI bands 11 (8.4um), 13 (10.3um), 14 (11.2um), and 15 (12.3um) and two reflectances in bands 2 and 3 (0.64um and 0.86um; used for cloud identification). The l2p_flags layer includes day/night, land, ice, twilight, and glint flags. Other variables include NCEP wind speed and ACSPO SST minus reference SST (Canadian Met Centre 0.1deg L4 SST). Pixel-level earth locations are not reported in the granules, as they remain unchanged from granule to granule. To obtain those, user has a choice of using a flat lat-lon file, or a Python script, both available at ftp://ftp.star.nesdis.noaa.gov/pub/socd4/coastwatch/sst/nrt/abi/nav/. Per GDS2 specifications, two additional Sensor-Specific Error Statistics layers (SSES bias and standard deviation) are reported in each pixel. The ACSPO VIIRS L2P product is monitored and validated against in situ data (Xu and Ignatov, 2014) using the Satellite Quality Monitor SQUAM (Dash et al, 2010), and BTs are validated against RTM simulation in MICROS (Liang and Ignatov, 2011). A reduced size (0.2GB/day), equal-angle gridded (0.02-deg resolution), ACSPO L3C product is also available, where gridded L2P SSTs are reported, and BT layers omitted.

This data set contains point locations of geothermally active areas as compiled by Motyka et al., 1993. Because of the variety of geothermal activity present at any given site, each site has been mapped according to the dominant style of geothermal activity (i.e. water dominated sites, vapor dominated sites, or sites of known subsurface activity). It is important to note that at any given sit...

The GOES-R PLT North Alabama Lightning Mapping Array (LMA) dataset consists of total lightning data measured from the North Alabama LMA (NALMA) network during the GOES-R Post Launch Test (PLT) airborne science field campaign. The GOES-R PLT airborne science field campaign took place in support of the post-launch product validation of the Advanced Baseline Imager (ABI) and the Geostationary Lightning Mapper (GLM). The LMA measures the arrival time of radiation from a lightning discharge at multiple stations and locates the sources of radiation to produce a three-dimensional map of total lightning activity. These data files are available in compressed ASCII files and are available from March 1, 2017 through June 1, 2017.

A test resource to check the python api. Visit https://dataone.org/datasets/sha256%3Ab2476b888788447addba5a3a94d8bbdcf608f2c62f3d6110549dcbdcec4da6fb for complete metadata about this dataset.

The GOES-R PLT Colorado Lightning Mapping Array (LMA) dataset consists of total lightning data measured from the Colorado LMA (COLMA) network during the GOES-R Post Launch Test (PLT) airborne science field campaign. The GOES-R PLT airborne science field campaign took place in support of the post-launch product validation of the Advanced Baseline Imager (ABI) and the Geostationary Lightning Mapper (GLM). The LMA measures the arrival time of radiation from a lightning discharge at multiple stations and locates the sources of radiation to produce a three-dimensional map of total lightning activity. These data files are available in compressed ASCII files and are available from March 1, 2017 through May 31, 2017.

Metadata: NOAA GOES-R Series Advanced Baseline Imager (ABI) Level 1b RadiancesMore information about this imagery can be found here.This satellite imagery combines data from the NOAA GOES East and West satellites and the JMA Himawari satellite, providing full coverage of weather events for most of the world, from the west coast of Africa west to the east coast of India. The tile service updates to the most recent image every 10 minutes at 1.5 km per pixel resolution.The infrared (IR) band detects radiation that is emitted by the Earth’s surface, atmosphere and clouds, in the “infrared window” portion of the spectrum. The radiation has a wavelength near 10.3 micrometers, and the term “window” means that it passes through the atmosphere with relatively little absorption by gases such as water vapor. It is useful for estimating the emitting temperature of the Earth’s surface and cloud tops. A major advantage of the IR band is that it can sense energy at night, so this imagery is available 24 hours a day.The Advanced Baseline Imager (ABI) instrument samples the radiance of the Earth in sixteen spectral bands using several arrays of detectors in the instrument’s focal plane. Single reflective band ABI Level 1b Radiance Products (channels 1 - 6 with approximate center wavelengths 0.47, 0.64, 0.865, 1.378, 1.61, 2.25 microns, respectively) are digital maps of outgoing radiance values at the top of the atmosphere for visible and near-infrared (IR) bands. Single emissive band ABI L1b Radiance Products (channels 7 - 16 with approximate center wavelengths 3.9, 6.185, 6.95, 7.34, 8.5, 9.61, 10.35, 11.2, 12.3, 13.3 microns, respectively) are digital maps of outgoing radiance values at the top of the atmosphere for IR bands. Detector samples are compressed, packetized and down-linked to the ground station as Level 0 data for conversion to calibrated, geo-located pixels (Level 1b Radiance data). The detector samples are decompressed, radiometrically corrected, navigated and resampled onto an invariant output grid, referred to as the ABI fixed grid.McIDAS merge technique and color mapping provided by the Cooperative Institute for Meteorological Satellite Studies (Space Science and Engineering Center, University of Wisconsin - Madison) using satellite data from SSEC Satellite Data Services and the McIDAS visualization software.

HEPGIS is a web-based interactive geographic map server that allows users to navigate and view geo-spatial data, print maps, and obtain data on specific features using only a web browser. It includes geo-spatial data used for transportation planning. HEPGIS previously received ARRA funding for development of Economically distressed Area maps. It is also being used to demonstrate emerging trends to address MPO and statewide planning regulations/requirements , enhanced National Highway System, Primary Freight Networks, commodity flows and safety data . HEPGIS has been used to help implement MAP-21 regulations and will help implement the Grow America Act, particularly related to Ladder of Opportunities and MPO reforms.

In addition to displaying earthquakes by magnitude, this service also provide earthquake impact details. Impact is measured by population as well as models for economic and fatality loss. For more details, see: PAGER Alerts. Consumption Best Practices:

As a service that is subject to very high usage, ensure peak performance and accessibility of your maps and apps by avoiding the use of non-cache-able relative Date/Time field filters. To accommodate filtering events by Date/Time, we suggest using the included "Age" fields that maintain the number of days or hours since a record was created or last modified, compared to the last service update. These queries fully support the ability to cache a response, allowing common query results to be efficiently provided to users in a high demand service environment.When ingesting this service in your applications, avoid using POST requests whenever possible. These requests can compromise performance and scalability during periods of high usage because they too are not cache-able.Update Frequency: Events are updated as frequently as every 5 minutes and are available up to 30 days with the following exceptions:

Events with a Magnitude LESS than 4.5 are retained for 7 daysEvents with a Significance value, 'sig' field, of 600 or higher are retained for 90 days In addition to event points, ShakeMaps are also provided. These have been dissolved by Shake Intensity to reduce the Layer Complexity.The specific layers provided in this service have been Time Enabled and include: Events by Magnitude: The event’s seismic magnitude value.Contains PAGER Alert Level: USGS PAGER (Prompt Assessment of Global Earthquakes for Response) system provides an automated impact level assignment that estimates fatality and economic loss.Contains Significance Level: An event’s significance is determined by factors like magnitude, max MMI, ‘felt’ reports, and estimated impact.Shake Intensity: The Instrumental Intensity or Modified Mercalli Intensity (MMI) for available events.For field terms and technical details, see: ComCat DocumentationAlternate SymbologiesVisit the Classic USGS Feature Layer item for a Rainbow view of Shakemap features.RevisionsAug 14, 2024: Added a default Minimum scale suppression of 1:6,000,000 on Shake Intensity layer.Jul 11, 2024: Updated event popup, setting 'Tsunami Warning' text to 'Alert Possible' when flag is present. Also included hyperlink to tsunami warning center.Feb 13, 2024: Updated feed logic to remove Superseded eventsThis map is provided for informational purposes and is not monitored 24/7 for accuracy and currency. Always refer to USGS source for official guidance.If you would like to be alerted to potential issues or simply see when this Service will update next, please visit our Live Feed Status Page!

A complete list of live websites using the Interactive Geo Maps technology, compiled through global website indexing conducted by WebTechSurvey.

HEPGIS is a web-based interactive geographic map server that allows users to navigate and view geo-spatial data, print maps, and obtain data on specific features using only a web browser. It includes geo-spatial data used for transportation planning. HEPGIS previously received ARRA funding for development of Economically distressed Area maps. It is also being used to demonstrate emerging trends to address MPO and statewide planning regulations/requirements , enhanced National Highway System, Primary Freight Networks, commodity flows and safety data . HEPGIS has been used to help implement MAP-21 regulations and will help implement the Grow America Act, particularly related to Ladder of Opportunities and MPO reforms.

Public health is a major concern in Africa, where malaria epidemic is a recurring problem. Factors supporting these diseases include: 1) environmental conditions leading to surface water for reproduction of mosquitoes, which are vectors that commonly carry the infectious microbes; 2) humidity for adult mosquito survival; and 3) specific air temperature to sustain development rates of both the vector and parasite populations. Providing information on the location of open waters where these parasites thrive is crucial in mitigating the problem

Minnesota's original public land survey plat maps were created between 1848 and 1907 during the first government land survey of the state by the U.S. Surveyor General's Office. This collection of more than 3,600 maps includes later General Land Office (GLO) and Bureau of Land Management maps up through 2001. Scanned images of the maps are available in several digital formats and most have been georeferenced.

The survey plat maps, and the accompanying survey field notes, serve as the fundamental legal records for real estate in Minnesota; all property titles and descriptions stem from them. They also are an essential resource for surveyors and provide a record of the state's physical geography prior to European settlement. Finally, they testify to many years of hard work by the surveying community, often under very challenging conditions.

The deteriorating physical condition of the older maps (drawn on paper, linen, and other similar materials) and the need to provide wider public access to the maps, made handling the original records increasingly impractical. To meet this challenge, the Office of the Secretary of State (SOS), the State Archives of the Minnesota Historical Society (MHS), the Minnesota Department of Transportation (MnDOT), MnGeo and the Minnesota Association of County Surveyors collaborated in a digitization project which produced high quality (800 dpi), 24-bit color images of the maps in standard TIFF, JPEG and PDF formats - nearly 1.5 terabytes of data. Funding was provided by MnDOT.

In 2010-11, most of the JPEG plat map images were georeferenced. The intent was to locate the plat images to coincide with statewide geographic data without appreciably altering (warping) the image. This increases the value of the images in mapping software where they can be used as a background layer.

Based on open access data, 79 Mediterranean passenger ports are analyzed to compare their infrastructure, hinterland accessibility and offered multi-modality categories. Comparative Geo-spatial analysis is also carried out by using the data normalization method in order to visualize the ports' performance on maps. These data driven comprehensive analytical results can bring added value to sustainable development policy and planning initiatives in the Mediterranean Region. The analyzed elements can be also contributed to the development of passenger port performance indicators. The empirical research methods used for the Mediterranean passenger ports can be replicated for transport nodes of any region around the world to determine their relative performance on selected criteria for improvement and planning.

The Mediterranean passenger ports were initially categorized into cruise and ferry ports. The cruise ports were identified from the member list of the Association for the Mediterranean Cruise Ports (MedCruise), representing more than 80% of the cruise tourism activities per country. The identified cruise ports were mapped by selecting the corresponding geo-referenced ports from the map layer developed by the European Marine Observation and Data Network (EMODnet). The United Nations (UN) Code for Trade and Transport Locations (LOCODE) was identified for each of the cruise ports as the common criteria to carry out the selection. The identified cruise ports not listed by the EMODnet were added to the geo-database by using under license the editing function of the ArcMap (version 10.1) geographic information system software. The ferry ports were identified from the open access industry initiative data provided by the Ferrylines, and were mapped in a similar way as the cruise ports (Figure 1).

Based on the available data from the identified cruise ports, a database (see Table A1–A3) was created for a Mediterranean scale analysis. The ferry ports were excluded due to the unavailability of relevant information on selected criteria (Table 2). However, the cruise ports serving as ferry passenger ports were identified in order to maximize the scope of the analysis. Port infrastructure and hinterland accessibility data were collected from the statistical reports published by the MedCruise, which are a compilation of data provided by its individual member port authorities and the cruise terminal operators. Other supplementary sources were the European Sea Ports Organization (ESPO) and the Global Ports Holding, a cruise terminal operator with an established presence in the Mediterranean. Additionally, open access data sources (e.g. the Google Maps and Trip Advisor) were consulted in order to identify the multi-modal transports and bridge the data gaps on hinterland accessibility by measuring the approximate distances.

HEPGIS is a web-based interactive geographic map server that allows users to navigate and view geo-spatial data, print maps, and obtain data on specific features using only a web browser. It includes geo-spatial data used for transportation planning. HEPGIS previously received ARRA funding for development of Economically distressed Area maps. It is also being used to demonstrate emerging trends to address MPO and statewide planning regulations/requirements , enhanced National Highway System, Primary Freight Networks, commodity flows and safety data . HEPGIS has been used to help implement MAP-21 regulations and will help implement the Grow America Act, particularly related to Ladder of Opportunities and MPO reforms.