Geospatial data about Brunswick County, North Carolina Zoning. Export to CAD, GIS, PDF, CSV and access via API.

Geospatial data about Brunswick County, North Carolina Roads. Export to CAD, GIS, PDF, CSV and access via API.

Zoning for unincorporated areas of Brunswick County.

This line layer contains all road centerlines within Brunswick County. This data is maintained primarily for 911 routing purposes. Actual physical roads within the county are maintained by the North Carolina Department of Transportation or private entities.

This layer represents both County and Municipal Zoning for the extent of Brunswick County.

This point layer represents all addresses assigned by Brunswick County as well as addresses assigned by municipalities within the county. County addresses may be permanent (representing an actual addressable structure) or temporary (created based on a site plan or future intent for an addressable structure).

Election District data current as of May 2024Parcel data current as of October 2023Spatial Reference of Source Data: NAD 83 State Plane – New York East.Spatial Reference of Web Service: WGS 1984 Web Mercator Auxiliary Sphere.Contact Information:Jolene WeidlichGIS ManagerRensselaer County Bureau of Tax Services99 Troy RdEast Greenbush, NY 12061(518)270-2682JWeidlich@rensco.com

Brunswick County parcels along with associated Tax data

Land, building and total market value for Brunswick County Tax Parcels for tax year 202, as of January 1, 2024.Note: These values represent market values as determined by the Brunswick County Tax Office, as of January 1, 2024. These values do not represent assessed value, and may change at any time.

Topography countours for Brunswick County. These 4-foot interval contours were derived from 2014 DEMs provided by the State of North Carolina Department of Public Safety, Emergency Management Division.

Land, building and total market value for Brunswick County Tax Parcels for tax year 2022, as of January 1, 2022.Note: These values represent market values as determined by the Brunswick County Tax Office, as of January 1, 2022. These values do not represent assessed value, and may change at any time.

Land, building and total market value for Brunswick County Tax Parcels for tax year 2018. This data reflects values as of January 1st, 2018, based on 2015 revaluation.

This dataset shows schools in the form of their parcels within the WMPO's planning area. WMPO's planning area includes all of New Hanover County along with portions of Brunswick County and Pender County. The schools highlighted in this data are public, private, charter, and university/community colleges. Child development and daycare centers are not included. The data was derived from imagery and parcels.

Officel repository of parcel lines transcribed from recorded plats. Coordinate Geometry (COGO) and an accuracy code to evaluate the accuracy to the plat began in 2009 on all new recorded plats. This also was the beginning of a parcel realignment project that is reviewing each subdivision to improve accuracy. Contact Glynn County GIS Department (912)554-7418 at 1725 Reynolds St Suite 205 Brunswick, GA 31520.

Orthoimagery captured January and February 2019 by EagleView, Inc. Imagery captured at 3-inch resolution for coastal areas and greater Leland area within Brunswick County.

Orthoimagery captured January and February 2019 by EagleView, Inc. Imagery captured at 9-inch resolution for all of Brunswick County.

EagleView acquired highly accurate Light Detection and Ranging (LiDAR) elevation data for Middlesex County, NJ in April 2017 and May 2017. This dataset represents Middlesex County, NJ. The area of interest is comprised of approximately 343 square miles. Data is in NAD_1983_2011_StatePlane_New_Jersey_FIPS_2900_Ft_US, NAVD88 Geoid12B, US survey Feet. LiDAR for this dataset was classified and quality controlled by EagleView. Digital Elevation Models, Contours, and Hydrographic breaklines were generated by Ground Point and subsequently quality controlled by EagleView. LiDAR nominal point spacing was 0.387 meters and point density was 6.674 points per square meter. The RMSEz was computed to be 0.09 meters. AccuracyZ has been tested to meet 18.2 cm Fundamental Vertical Accuracy at 95 percent confidence level using (RMSEz * 1.9600) as defined by the National Standards for Spatial Data Accuracy (NSSDA); assessed and reported using National Digital Elevation Program (3DEP)/ASPRS Guidelines. LiDAR data meets USGS Quality Level 2 (QL2) standards. Contours were derived from LiDAR.

This dataset represents 2 foot contour lines in South Brunswick, Middlesex County, NJ.This data was provided in a deliverable with several other elevation projects in 2017 by EagleView. See below for more information:EagleView acquired highly accurate Light Detection and Ranging (LiDAR) elevation data for Middlesex County, NJ in April 2017 and May 2017. This dataset represents Middlesex County, NJ. The area of interest is comprised of approximately 343 square miles. Data is in NAD_1983_2011_StatePlane_New_Jersey_FIPS_2900_Ft_US, NAVD88 Geoid12B, US survey Feet. LiDAR for this dataset was classified and quality controlled by EagleView. Digital Elevation Models, Contours, and Hydrographic breaklines were generated by Ground Point and subsequently quality controlled by EagleView. LiDAR nominal point spacing was 0.387 meters and point density was 6.674 points per square meter. The RMSEz was computed to be 0.09 meters. AccuracyZ has been tested to meet 18.2 cm Fundamental Vertical Accuracy at 95 percent confidence level using (RMSEz * 1.9600) as defined by the National Standards for Spatial Data Accuracy (NSSDA); assessed and reported using National Digital Elevation Program (3DEP)/ASPRS Guidelines. LiDAR data meets USGS Quality Level 2 (QL2) standards. Contours were derived from LiDAR.

EagleView acquired highly accurate Light Detection and Ranging (LiDAR) elevation data for Middlesex County, NJ in April 2017 and May 2017. This dataset represents Middlesex County, NJ. The area of interest is comprised of approximately 343 square miles. Data is in NAD_1983_2011_StatePlane_New_Jersey_FIPS_2900_Ft_US, NAVD88 Geoid12B, US survey Feet. LiDAR for this dataset was classified and quality controlled by EagleView. Digital Elevation Models, Contours, and Hydrographic breaklines were generated by Ground Point and subsequently quality controlled by EagleView. LiDAR nominal point spacing was 0.387 meters and point density was 6.674 points per square meter. The RMSEz was computed to be 0.09 meters. AccuracyZ has been tested to meet 18.2 cm Fundamental Vertical Accuracy at 95 percent confidence level using (RMSEz * 1.9600) as defined by the National Standards for Spatial Data Accuracy (NSSDA); assessed and reported using National Digital Elevation Program (3DEP)/ASPRS Guidelines. LiDAR data meets USGS Quality Level 2 (QL2) standards. Contours were derived from LiDAR.