MMD uses a Geographic Information System (GIS) to locate and track its mining activities in the state. This is a computer system that can capture, store, analyze and display geographically referenced (location) information. The power of this system is its ability to draw conclusions about relationships between data that have a spatial component. GIS provides a method of displaying accurate mapping and database information to the staff and public.

This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 ½ minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. The second division of the PLSS is quarter, quarter-quarter, sixteenth or government lot division of the PLSS. The second and third divisions are combined into this feature class as an intentional de-normalization of the PLSS hierarchical data. The polygons in this feature class represent the smallest division to the sixteenth that has been defined for the first division. For example In some cases sections have only been divided to the quarter. Divisions below the sixteenth are in the Special Survey or Parcel Feature Class. In the Public Land Survey System a Township refers to a unit of land, that is nominally six miles on a side, usually containing 36 sections.

NMFWRI represents the state’s only dedicated capability for supporting the spatial data analysis needs of external stakeholders in the natural resources sector, as well as the GIS/GPS capacity for Highlands University and for most of northern New Mexico. NMFWRI’s GIS work also provides help with maps and other geographic information to New Mexico groups engaged in forest restoration and land management, but who are too small to maintain their own GIS capability. These groups include soil and water conservation districts, municipalities, private groups and individuals, and tribal organizations.

The Geographic Names Information System (GNIS) actively seeks data from and partnerships with Government agencies at all levels and other interested organizations. The GNIS is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board on Geographic Names, a Federal inter-agency body chartered by public law to maintain uniform feature name usage throughout the Government and to promulgate standard names to the public. The GNIS is the official repository of domestic geographic names data; the official vehicle for geographic names use by all departments of the Federal Government; and the source for applying geographic names to Federal electronic and printed products of all types. See http://geonames.usgs.gov for additional information.

This dataset has a data dictionary that can be downloaded here. The NM Office of the State Engineer (OSE) "Point of Diversions" (POD) layer includes well locations, surface declarations, or surface permits. These data were extracted from the OSE W.A.T.E.R.S. (Water Administration Technical Engineering Resource System) database and geo-located (mapped). These data have varying degrees of accuracy and have not been validated. This message is to alert users of this data to various changes regarding how this POD data is generated and maintained by the NM Office of the State Engineer. In addition, all attribute fields are fully described in the metadata, including descriptions of field codes. Please read the metadata accompanying this GIS data layer for further information. Any questions regarding this GIS data should be directed NM OSE Information Technology Systems Bureau GIS at the contact information given below. Stephen N. Hayes NMOSE ITSB GIS Data Manager(505) 827-6321 PO Box 25102 Santa Fe, NM 87504 stephen.hayes@ose.nm.gov

This dataset provides an initial version of the generalized physical boundaries of New Mexico State Parks, in polygonal form with limited attributes, compiled using available data from a variety of sources. The boundaries have been digitized from AutoCAD drawings and/or from legal descriptions, supplemented by digital orthophotography cross-checking, and adjusted to the GCDB when possible. The dataset will be refined in the future to include other attributes and provide better accuracy.

This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 ½ minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. The second division of the PLSS is quarter, quarter-quarter, sixteenth or government lot division of the PLSS. The second and third divisions are combined into this feature class as an intentional de-normalization of the PLSS hierarchical data. The polygons in this feature class represent the smallest division to the sixteenth that has been defined for the first division. For example In some cases sections have only been divided to the quarter. Divisions below the sixteenth are in the Special Survey or Parcel Feature Class. The second division of the PLSS is quarter, quarter-quarter, sixteenth or government lot division of the PLSS. The second and third divisions are combined into this feature class as an intentional de-normalization of the PLSS hierarchical data. The polygons in this feature class represent the smallest division to the sixteenth that has been defined for the first division. For example In some cases sections have only been divided to the quarter. Divisions below the sixteenth are in the Special Survey or Parcel Feature Class.

This map runs on this app: http://nmcdc.maps.arcgis.com/home/item.html?id=2088cfcae5e84568bee211db7e226c28PEOPLE AND PLACE MATTER: USING INTEGRATED DATA SYSTEMS TO UNDERSTAND CHRONIC ABSENTEEISM -https://www.neighborhoodindicators.org/library/catalog/people-and-place-matter-using-integrated-data-systems-understand-chronic

These two shapefiles represent New Mexico NHD High Resolution stream segments and waterbodies, merged and clipped to the state boundary. RAW NHD High Resolution data, including additional layer files, is available from: https://viewer.nationalmap.gov/basic/

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. The TIGER/Line shapefiles include both incorporated places (legal entities) and census designated places or CDPs (statistical entities). An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division (MCD), which generally is created to provide services or administer an area without regard, necessarily, to population. Places always nest within a state, but may extend across county and county subdivision boundaries. An incorporated place usually is a city, town, village, or borough, but can have other legal descriptions. CDPs are delineated for the decennial census as the statistical counterparts of incorporated places. CDPs are delineated to provide data for settled concentrations of population that are identifiable by name, but are not legally incorporated under the laws of the state in which they are located. The boundaries for CDPs often are defined in partnership with state, local, and/or tribal officials and usually coincide with visible features or the boundary of an adjacent incorporated place or another legal entity. CDP boundaries often change from one decennial census to the next with changes in the settlement pattern and development; a CDP with the same name as in an earlier census does not necessarily have the same boundary. The only population/housing size requirement for CDPs is that they must contain some housing and population. The boundaries of most incorporated places in this shapefile are as of January 1, 2015, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The boundaries of all CDPs were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census.

The TIGER/Line Shapefiles are an extract of selected geographic and cartographic information from the Census MAF/TIGER database. The Census MAF/TIGER database represents a seamless national file with no overlaps or gaps between parts. However, each TIGER/Line Shapefile is designed to stand alone as an independent data set or the shapefiles can be combined to cover the whole nation.

The Digital Geologic-GIS Map of the Togeye Lake Quadrangle, New Mexico is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) an ESRI file geodatabase (togl_geology.gdb), and a 2.) Open Geospatial Consortium (OGC) geopackage. The file geodatabase format is supported with a 1.) ArcGIS Pro 3.X map file (.mapx) file (togl_geology.mapx) and individual Pro 3.X layer (.lyrx) files (for each GIS data layer). Upon request, the GIS data is also available in ESRI shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) a readme file (elmo_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (elmo_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (togl_geology_metadata_faq.pdf). Please read the elmo_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. QGIS software is available for free at: https://www.qgis.org/en/site/. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri.htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (togl_geology_metadata.txt or togl_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:24,000 and United States National Map Accuracy Standards features are within (horizontally) 12.2 meters or 40 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in ArcGIS Pro, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

Earth Data Analysis Center (EDAC) at The University of New Mexico (UNM) develops, manages, and enhances the New Mexico Resource Geographic Information System (RGIS) Program and Clearinghouse. Nationally, NM RGIS is among the largest of state-based programs for digital geospatial data and information and continues to add to its data offerings, services, and technology.

The RGIS Program mission is to develop and expand geographic information and use of GIS technology, creating a comprehensive GIS resource for state and local governments, educational institutions, nonprofit organizations, and private businesses; to promote geospatial information and GIS technology as primary analytical tools for decision makers and researchers; and to provide a central Clearinghouse to avoid duplication and improve information transfer efficiency.

As a repository for digital geospatial data acquired from local and national public agencies and data created expressly for RGIS, the clearinghouse serves as a major hub in New Mexico’s network for inter-agency and intergovernmental coordination, data sharing, information transfer, and electronic communication. Data sets available for download include political and administrative boundaries, place names and locations, census data (current and historical), 30 years of digital orthophotography, 80 years of historic aerial photography, satellite imagery, elevation data, transportation data, wildfire boundaries and natural resource data.

This map layer consists of federally owned or administered lands of the United States, Puerto Rico, and the U.S. Virgin Islands. Only areas of 640 acres or more are included. There may be private inholdings within the boundaries of Federal lands in this map layer. This is a revised version of the January 2005 map layer.

The Protected Areas Database of the United States (PAD-US) is a geodatabase, managed by USGS GAP, that illustrates and describes public land ownership, management and other conservation lands, including voluntarily provided privately protected areas. The State, Regional and LCC geodatabases contain two feature classes. The PADUS1_3_FeeEasement feature class and the national MPA feature class. Legitimate and other protected area overlaps exist in the full inventory, with Easements loaded on top of Fee. Parcel data within a protected area are dissolved in this file that powers the PAD-US Viewer. As overlaps exist, GAP creates separate analytical layers to summarize area statistics for "GAP Status Code" and "Owner Name". Contact the PAD-US Coordinator for more information. The lands included in PAD-US are assigned conservation measures that qualify their intent to manage lands for the preservation of biological diversity and to other natural, recreational and cultural uses; managed for these purposes through legal or other effective means. The geodatabase includes: 1) Geographic boundaries of public land ownership and voluntarily provided private conservation lands (e.g., Nature Conservancy Preserves); 2) The combination land owner, land manager, management designation or type, parcel name, GIS Acres and source of geographic information of each mapped land unit 3) GAP Status Code conservation measure of each parcel based on USGS National Gap Analysis Program (GAP) protection level categories which provide a measurement of management intent for long-term biodiversity conservation 4) IUCN category for a protected area's inclusion into UNEP-World Conservation Monitoring Centre's World Database for Protected Areas. IUCN protected areas are defined as, "A clearly defined geographical space, recognized, dedicated and managed, through legal or other effective means, to achieve the long-term conservation of nature with associated ecosystem services and cultural values" and are categorized following a classification scheme available through USGS GAP; 5) World Database of Protected Areas (WDPA) Site Codes linking the multiple parcels of a single protected area in PAD-US and connecting them to the Global Community. As legitimate and other overlaps exist in the combined inventory GAP creates separate analytical layers to obtain area statistics for "GAP Status Code" and "Owner Name". PAD-US version 1.3 Combined updates include: 1) State, local government and private protected area updates delivered September 2011 from PAD-US State Data Stewards: CO (Colorado State University), FL (Florida Natural Areas Inventory), ID (Idaho Fish and Game), MA (The Commonwealth's Office of Geographic Information Systems, MassGIS), MO (University of Missouri, MoRAP), MT (Montana Natural Heritage Program), NM (Natural Heritage New Mexico), OR (Oregon Natural Heritage Program), VA (Department of Conservation and Recreation, Virginia Natural Heritage Program). 2) Select local government (i.e. county, city) protected areas (3,632) across the country (to complement the current PAD-US inventory) aggregated by the Trust for Public Land (TPL) for their Conservation Almanac that tracks the conservation finance movement across the country. 3) A new Date of Establishment field that identifies the year an area was designated or otherwise protected, attributed for 86% of GAP Status Code 1 and 2 protected areas. Additional dates will be provided in future updates. 4) A national wilderness area update from wilderness.net 5) The Access field that describes public access to protected areas as defined by data stewards or categorical assignment by Primary Designation Type. . The new Access Source field documents local vs. categorical assignments. See the PAD-US Standard Manual for more information: gapanalysis.usgs.gov/padus 6) The transfer of conservation measures (i.e. GAP Status Codes, IUCN Categories) and documentation (i.e. GAP Code Source, GAP Code Date) from PAD-US version 1.2 or categorical assignments (see PAD-US Standard) when not provided by data stewards 7) Integration of non-sensitive National Conservation Easement Database (NCED) easements from August 2011, July 2012 with PAD-US version 1.2 easements. Duplicates were removed, unless 'Stacked' = Y and multiple easements exist. 8) Unique ID's transferred from NCED or requested for new easements. NCED and PAD-US are linked via Source UID in the PAD-US version 1.3 Easement feature class. 9) Official (member and eligible) MPAs from the NOAA MPA Inventory (March 2011, www.mpa.gov) translated into the PAD-US schema with conservation measures transferred from PAD-US version 1.2 or categorically assigned to new protected areas. Contact the PAD-US Coordinator for documentation of categorical GAP Status Code assignments for MPAs. 10) Identified MPA records that overlap existing protected areas in the PAD-US Fee feature class (i.e. PADUS Overlap field in MPA feature class). For example, many National Wildlife Refuges and National Parks are also MPAs and are represented in the PAD-US MPA and Fee feature classes.

The Digital Geologic-GIS Map of the Crystal Quadrangle, New Mexico is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (crys_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (crys_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (crys_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) A GIS readme file (cach_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (cach_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (crys_geology_metadata_faq.pdf). Please read the cach_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: https://www.google.com/earth/versions/. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (crys_geology_metadata.txt or crys_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:24,000 and United States National Map Accuracy Standards features are within (horizontally) 12.2 meters or 40 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

This data release contains spatial data on the location, number, size and extent of energy-related surface disturbances on the Colorado Plateau of Utah, Colorado, and New Mexico as of 2016. The database includes: 1) polygons of oil and gas pads generated from automated and manual classification of aerial imagery, and 2) polylines of roads derived from the U.S. Census Bureau TIGER/Line Shapefile, supplemented with additional oil and gas access roads digitized from aerial imagery. Pad polygons and road segments are attributed with a "spud year" date based on spud information from the nearest well point. Spudding is the process of beginning to drill a well in the oil and gas industry, and the spud year is a close approximation of when the access roads and pads were cleared for development. The spud year information can be used to develop a chronology of oil and gas surface disturbances across the study region. The remote sensing-based pad mapping captures bright soil of disturbed are ...

This data set is a digital soil survey and generally is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was prepared by digitizing maps, by compiling information onto a planimetric correct base and digitizing, or by revising digitized maps using remotely sensed and other information. This data set consists of georeferenced digital map data and computerized attribute data. The map data are in a soil survey area extent format and include a detailed, field verified inventory of soils and miscellaneous areas that normally occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. A special soil features layer (point and line features) is optional. This layer displays the location of features too small to delineate at the mapping scale, but they are large enough and contrasting enough to significantly influence use and management. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties.

This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 ½ minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. The second division of the PLSS is quarter, quarter-quarter, sixteenth or government lot division of the PLSS. The second and third divisions are combined into this feature class as an intentional de-normalization of the PLSS hierarchical data. The polygons in this feature class represent the smallest division to the sixteenth that has been defined for the first division. For example In some cases sections have only been divided to the quarter. Divisions below the sixteenth are in the Special Survey or Parcel Feature Class. The second division of the PLSS is quarter, quarter-quarter, sixteenth or government lot division of the PLSS. The second and third divisions are combined into this feature class as an intentional de-normalization of the PLSS hierarchical data. The polygons in this feature class represent the smallest division to the sixteenth that has been defined for the first division. For example In some cases sections have only been divided to the quarter. Divisions below the sixteenth are in the Special Survey or Parcel Feature Class.

The Digital Geologic-GIS Map of the Goat Hill Quadrangle, New Mexico is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) an ESRI file geodatabase (gohi_geology.gdb), and a 2.) Open Geospatial Consortium (OGC) geopackage. The file geodatabase format is supported with a 1.) ArcGIS Pro 3.X map file (.mapx) file (gohi_geology.mapx) and individual Pro 3.X layer (.lyrx) files (for each GIS data layer). Upon request, the GIS data is also available in ESRI shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) a readme file (elmo_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (elmo_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (gohi_geology_metadata_faq.pdf). Please read the elmo_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. QGIS software is available for free at: https://www.qgis.org/en/site/. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri.htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (gohi_geology_metadata.txt or gohi_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:24,000 and United States National Map Accuracy Standards features are within (horizontally) 12.2 meters or 40 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in ArcGIS Pro, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).