This layer is a component of Fairfield Parcel Geometry Service.

© Town of Fairfield

Download .zipThe Ohio Wetlands Inventory is based on analysis of satellite data by Bruce R. Motsch and Gary M. Schaal and is intended solely as an indicator of wetland sites for which field review should be conducted. The satellite data reflect conditions during the specific year and season the data was acquired and all wetlands may not be indicated. Statistics generated from the inventory are intended solely as an approximation.

The Ohio Wetlands Inventory for Fairfield County was produced from April 1987 Landsat Thematic mapper data (cell size 30 meters by 30 meters) using ERDAS Image processing software. The raster data has been converted to ARC/INFO format and exported to an interchange file.

The data was originally georeferenced to UTM zone 17 coordinates NAD 27 and is also available in this coordinate system in ERDAS Imagine format.

The class of woods on hydric soils, wet meadow and farmed wetland fall on hydric soils when digital soils data is available for the county.

Original coverage data was converted from the .e00 file to a more standard ESRI shapefile(s) in November 2014.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesReal Estate & Land ManagementReal Estate and Lands Management2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThis theme shows detailed watersheds for Fairfield County, as digitized in vector mode from mylar copies of maps maintained by the U.S. Geological Survey, Water Resources Division. Some subwatershed areas have been aggregated from those contained on the original maps.

Original coverage data was converted from the .e00 file to a more standard ESRI shapefile(s) in November 2014.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesReal Estate & Land ManagementReal Estate and Lands Management2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipA potentiometric surface map is a contour map that represents the top of the ground water surface in an aquifer. The contour lines illustrate the potentiometric surface much as the contour lines of a topographic map represent a visual model of the ground surface. A potentiometric surface map is very similar to a water table map in that both show the horizontal direction and gradient of ground water flow.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Geological Survey2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6693Email: gis.support@dnr.ohio.gov

This layer is a component of Fairfield Inland Wetlands Layers.

© Town of Fairfield

This feature service is available through CT ECO, a partnership between UConn CLEAR and CT DEEP. It is also available as a map service and a tiled map service. This dataset is a statewide service of municipal parcels (properties) including their geometry (polygon shape) and attributes (tabular information about each parcel). In order to preserve the attributes, each municipality is added individually to the service.

Download .zipMaps and data associated with oil-and-gas wells represent one of the largest datasets at the Ohio Department of Natural Resources. This GIS data layer contains all the locatable oil-and-gas wells in Ohio. The feature is derived from coordinates obtained from the Division of Oil and Gas Resources Management (DOGRM) oil and gas well database – Risk Based Data Management System (RBDMS). The RBDMS database has a long history and is a comprehensive collection of well data from historic pre-1980 paper well records (digitized by the Division of Geological Survey (DGS)) to post-1980 DOGRM database solutions.Since 1860, it is estimated that more than 267,000 oil-and-gas wells have been drilled in Ohio. The compressed file also includes a feature used to connect the surface location to the bottom location of a well that has been drilled directionally or horizontally. This feature is NOT the actual wellbore path, it is simply a graphical representation indicating the relationship between the two well points.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Oil & Gas ResourcesOil and Gas Resources Management2045 Morse Road Bldg F-2Columbus, OH, 43229-6693Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipA soil mapping unit designates a specific type of soil which has unique characteristics including texture, slope, and erosion class.

These soils were digitized from mylar orthophoto quarter USGS Quadrangles at a scale of 1:12000. Soil mapping unit boundaries were mapped on this base by Joseph R. Steiger et al. of the USDA, Natural Resources Conservation Service.

Original coverage data was converted from the .e00 file to a more standard ESRI shapefile(s) in November 2014.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesReal Estate & Land ManagementReal Estate and Lands Management2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

The Coastal Boundary layer is a 1:24,000-scale, polygon feature-based layer of the legal mylar-based maps adopted by the Commissioner of the Department of Environmental Protection (DEP) (i.e., maps were adopted on a town by town basis) showing the extent of lands and coastal waters as defined by Connecticut General Statute (C.G.S.) 22a-93(5)) within Connecticut's coastal area (defined by C.G.S. 22a-94(c)). The coastal boundary is a hybrid of the original 1:24,000 version maps prepared by DEP consistent with C.G.S. 22a-94(d) (Coastal Area) and the revised boundary mapping undertaken by twenty-two coastal towns prepared pursuant to C.G.S. 22a-94(f). This layer therefore does not replace the legal maps and may not be used for legal determinations. The Coastal Boundary layer includes a single polygon feature that represents the coastal boundary. No other features are included in this layer. Data is compiled at 1:24,000 scale. Attribute information is comprised of an Av_Legend attribute and a CoastB_Flg attribute to denote the coastal boundary. Other attributes include automatically calculated Shape_Length and Shape_Area fields. This data is not updated. Any regulated activity conducted within the coastal boundary by a municipal agency (i.e., plans of development, zoning regulations, municipal coastal programs and coastal site plan review (i.e., site plans submitted to zoning commission, subdivision or resubdivision plans submitted to planning commission, application for special permit or exception to the zoning or planning commissions or zoning board of appeals, variance submitted to zoning board of appeals and a referral of a municipal project)) must be conducted in a manner consistent with the requirements of the Connecticut Coastal Management Act (CMA; C.G.S. 22a-90 to 22a-113). As the Coastal Boundary is a hybrid of the Coastal Area, all state and federal agency activities must be consistent with the requirements of the CMA. As defined in C.G.S. 22a-94(b) the coastal boundary is a "continuous line delineated on the landward side by the interior contour elevation of the one hundred year frequency coastal flood zone, as defined and determined by the National Flood Insurance Act, as amended (USC 42 Section 4101, P.L. 93-234), or a one thousand foot linear setback measured from the mean high water mark in coastal waters, or a one thousand foot linear setback measured from the inland boundary of tidal wetlands mapped under section 22a-20, whichever is farthest inland; and shall be delineated on the seaward side by the seaward extent of the jurisdiction of the state." The original boundary maps were created in 1979 on stable mylar overlay using the 1:24,000-scale US Geological Survey topographic quadrangle maps (mylar film format). The source for tidal wetland maps were the legal 1:24,000 maps (mylar format) adopted by the Commissioner of DEP and transformed to 1:24,000 mylar-scale maps by the Office of Policy and Management (OPM) using an accurate pantograph. OPM similarly converted FEMA's flood insurance maps (various scales) to a 1:24,000 mylar overlay. The inland extent of coastal waters was plotted on 1:24,000 USGS topographic maps following the procedures and sources described in The Boundary Between Saltwater and Freshwater in Connecticut, December 1978 prepared by the State of Connecticut, Department of Environmental Protection, Coastal Area Management Program. The following twenty-two towns have adopted municipal coastal boundaries: Chester, Clinton, Darien, Deep River, East Haven, Essex, Fairfield, Greenwich, Groton, Guilford, Hamden, Ledyard, Madison, Milford, New Haven, New London, North Haven, Norwalk, Old Lyme, Old Saybrook, Stamford and Waterford. The coastal boundary maps for these towns may be at different scales than the original DEP draft maps and may contain minor adjustments to the boundary as permitted in C.G.S. 22a-94(f).

Download .zipThis coverage was extracted from the 1994 statewide land cover inventory of Ohio produced by Bruce R. Motsch and Gary M. Schaal of the Ohio Department of Natural Resources.

The land cover inventory for the State of Ohio was produced by the digital image processing of Landsat Thematic Mapper Data. The Thematic Mapper is a multi-spectral scanner that collects electromagnetic radiation reflected from the earth's surface in the visible, near infrared and mid-infrared wavelength bands. The resolution of the Thematic Mapper data is a 30 meter by 30 meter cell. The computer analysis of the data isolates unique spectral classes that relate to land cover characteristics.

The land cover inventory was produced from Thematic Mapper data acquired in September and October 1994. The data was classified into the general land cover categories of urban, agriculture/open urban areas, shrub/scrub, wooded, open water, non-forested wetlands and barren.

The land cover information reflects the conditions of the satellite data during the specific year and season the data was acquired. The Thematic Mapper data was processed using ERDAS image processing software. The data was originally created in raster format and georeferenced to Universal Transverse Mercator (UTM) zone 17 coordinates NAD27. The data can be combined with other georeferenced digital data layers.

The data is also available in its original ERDAS image format.

Original coverage data was converted from the .e00 file to a more standard ESRI shapefile(s) in November 2014.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesReal Estate & Land ManagementReal Estate and Lands Management2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

This layer is a component of Fairfield Easements.

Fairfield Easements

Geospatial data about Fairfield County, Ohio Addresses. Export to CAD, GIS, PDF, CSV and access via API.

See full Data Guide here. This layer includes polygon features that depict protected open space for towns of the Protected Open Space Mapping (POSM) project, which is administered by the Connecticut Department of Energy and Environmental Protection, Land Acquisition and Management. Only parcels that meet the criteria of protected open space as defined in the POSM project are in this layer. Protected open space is defined as: (1) Land or interest in land acquired for the permanent protection of natural features of the state's landscape or essential habitat for endangered or threatened species; or (2) Land or an interest in land acquired to permanently support and sustain non-facility-based outdoor recreation, forestry and fishery activities, or other wildlife or natural resource conservation or preservation activities. Includes protected open space data for the towns of Andover, Ansonia, Ashford, Avon, Beacon Falls, Canaan, Clinton, Berlin, Bethany, Bethel, Bethlehem, Bloomfield, Bridgewater, Bolton, Brookfield, Brooklyn, Canterbury, Canton, Chaplin, Cheshire, Colchester, Colebrook, Columbia, Cornwall, Coventry, Cromwell, Danbury, Derby, East Granby, East Haddam, East Hampton, East Hartford, East Windsor, Eastford, Ellington, Enfield, Essex, Farmington, Franklin, Glastonbury, Goshen, Granby, Griswold, Groton, Guilford, Haddam, Hampton, Hartford, Hebron, Kent, Killingworth, Lebanon, Ledyard, Lisbon, Litchfield, Madison, Manchester, Mansfield, Marlborough, Meriden, Middlebury, Middlefield, Middletown, Monroe, Montville, Morris, New Britain, New Canaan, New Fairfield, New Milford, New Hartford, Newington, Newtown, Norfolk, North, Norwich, Preston, Ridgefield, Shelton, Stonington, Oxford, Plainfield, Plainville, Pomfret, Portland, Prospect, Putnam, Redding, Rocky Hill, Roxbury, Salem, Salisbury, Scotland, Seymour, Sharon, Sherman, Simsbury, Somers, South Windsor, Southbury, Southington, Sprague, Sterling, Suffield, Thomaston, Thompson, Tolland, Torrington, Union, Vernon, Wallingford, Windham, Warren, Washington, Waterbury, Watertown, West Hartford, Westbrook, Weston, Wethersfield, Willington, Wilton, Windsor, Windsor Locks, Wolcott, Woodbridge, Woodbury, and Woodstock. Additional towns are added to this list as they are completed. The layer is based on information from various sources collected and compiled during the period from March 2005 through the present. These sources include but are not limited to municipal Assessor's records (the Assessor's database, hard copy maps and deeds) and existing digital parcel data. The layer represents conditions as of the date of research at each city or town hall. The Protected Open Space layer includes the parcel shape (geometry), a project-specific parcel ID based on the Town and Town Assessor's lot numbering system, and system-defined (automatically generated) fields. The Protected Open Space layer has an accompanying table containing more detailed information about each feature (parcel). This table is called Protected Open Space Dat, and can be joined to Protected Open Space in ArcMap using the parcel ID (PAR_ID) field. Detailed information in the Protected Open Space Data attribute table includes the Assessor's Map, Block and Lot numbers (the Assessor's parcel identification numbering system), the official name of the parcel (such as the park or forest name if it has one), address and owner information, the deed volume and page numbers, survey information, open space type, the unique parcel ID number (Par_ID), comments collected by researchers during city/town hall visits, and acreage. This layer does not include parcels that do not meet the definition of open space as defined above. Features are stored as polygons that represent the best available locational information, and are "best fit" to the land base available for each.

The Connecticut Department of Environmental Protection's (CTDEP) Permanently Protected Open Space Phase Mapping Project Phase 1 (Protected Open Space Phase1) layer includes permanently protected open space parcels in towns in Phase 1 that meet the CTDEP's definition for this project, the Permanently Protected Open Space Mapping (CT POSM) Project. The CTDEP defines permanently protected open space as (1) Land or interest in land acquired for the permanent protection of natural features of the state's landscape or essential habitat for endangered or threatened species; or (2) Land or an interest in land acquired to permanently support and sustain non facility-based outdoor recreations, forestry and fishery activities, or other wildlife or natural resource conservation or preservation activities.

Towns in Phase 1 of the CT POSM project are situated along the CT coast and portions of the Thames River and are the following: Branford, Bridgeport, Chester, Clinton, Darien, Deep River, East Haven, East Lyme, Essex, Fairfield, Greenwich, Groton, Guilford, Hamden, Ledyard, Lyme, Madison, Milford, Montville, New Haven, New London, North Branford, North Haven, Norwalk, Norwich, Old Lyme, Old Saybrook, Orange, Preston, Shelton, Stamford, Stonington, Stratford, Waterford, West Haven, Westbrook, Westport.

For the purposes of the project a number of categories or classifications of open space have also been created. These include: Land Trust, Land Trust with buidlings, Private, Private with buildings, Utility Company, Utility Company with buildings, Federal, State, Municipal, Municipal with buildings, Conservation easement, and non-DEP State land. The layer is based on information from various sources collected and compiled during the period from August 2002 trhough October 2003. These sources include municipal Assessor's records (the Assessor's database, hard copy maps and deeds) and existing digital parcel data. The layer represents conditions on the date of research at each city or town hall.

The Protected Open Space Phase1 layer includes the parcel shape (geometry), a project-specific parcel ID based on the Town and Town's Assessor lot numbering system, and system-defined (automatically generated) fields. In addition, the Protected_Open_Space_Phase1 layer has an accompanying table containing more detailed information about each parcel's collection, standardization and storage. This table is called Protected Open Space Phase1 Data and can be joined to Protected Open Space Phase1 in ArcMap using the parcel ID (PAR_ID) field. Detailed information includes the Assessor's Map, Block and Lot numbers (the Assessor's parcel identification numbering system), the official name of the parcel (such as the park or forest name if it has one), address and owner information, the deed volume and page numbers, survey information, open space type, the project-specific parcel ID number (Par_ID), comments collected by researchers during city/town hall visits, acreage collected during site reconaissance and the data source. This layer does not include parcels that do not meet the definition of open space as defined above. Features are stored as polygon feature type that represent the best available locational information, i.e. "best fit" to the land base available for each.

Phase 1 of the Protected Open Space Mapping (POSM) Project was accomplished by a contractor using only a querying process to identify open space. The contractor obtained assessor's data from the various towns and created programs to cull open space parcels strictly by query processes. We have found many errors and omissions in the data, but at this point in the project we cannot revisit all the coastal towns. Therefore, this data is being sent with a disclaimer for accuracy. You are welcome to use it but not to publish it. Please note that we do not include any water company parcels despite them being listed as part of our criteria because we must first obtain written clarification and clearance from the U.S. Department of Homeland Security.

We have since changed our data collection method for Phase 2 of this project. DEP staff now visit each town hall and thoroughly research the land records. The project is expected to be complete by 2010.

CT911_roads contains data from licensed Tele Atlas Dynamap Transportation version 9.3 (has a DYNAMAP ID) and data created by the State of Connecticut Department of Public Safety (does not have a DYNAMAP ID).

This layer is a component of Fairfield Parcel Geometry Service.

© Town of Fairfield

This feature layer is a general representation of detachments from the City of Columbus. It is not a legal record. This feature layer is updated throughout the annexations and detachment submission and approval process. Annexations and detachments to the City of Columbus are adopted by legislation approved by City Council and take effect upon recording within the appropriate County Recorder’s Office. This feature layer is a digitized representation of the process for annexation and detachment and is mapped based upon underlying parcel geography from the three County Auditor’s (Franklin, Fairfield, and Delaware) GIS parcel feature layers in which the City of Columbus currently resides.The City of Columbus makes no guarantee as to the accuracy of this mapping. It is provided as a general reference tool. User’s are advised to consult legal annexation records available within the various County Recorder’s Offices when attempting to determine the precise boundaries for the City of Columbus. Users are advised not to use this feature layer if they are unwilling to accept the conditions stated herein.Questions regarding this feature layer should be directed to the City of Columbus, Department of Public Service, Division of Infrastructure Management’s Map Room at OneStopPlans@columbus.gov.

Geospatial data about Fairfield County, Ohio Hydrants. Export to CAD, GIS, PDF, CSV and access via API.

This feature layer is a general representation of annexations to the City of Columbus. It is not a legal record. This feature layer is updated throughout the annexations and detachment submission and approval process. Annexations and detachments to the City of Columbus are adopted by legislation approved by City Council and take effect upon recording within the appropriate County Recorder’s Office. This feature layer is a digitized representation of the process for annexation and detachment and is mapped based upon underlying parcel geography from the three County Auditor’s (Franklin, Fairfield, and Delaware) GIS parcel feature layers in which the City of Columbus currently resides.The City of Columbus makes no guarantee as to the accuracy of this mapping. It is provided as a general reference tool. User’s are advised to consult legal annexation records available within the various County Recorder’s Offices when attempting to determine the precise boundaries for the City of Columbus. Users are advised not to use this feature layer if they are unwilling to accept the conditions stated herein.Questions regarding this feature layer should be directed to the City of Columbus, Department of Public Service, Division of Infrastructure Management’s Map Room at OneStopPlans@columbus.gov.

This layer is a component of Bridgeport Parcel Geometry Service.

© City of Bridgeport, GBRC

Geospatial data about Fairfield County, Ohio Manholes. Export to CAD, GIS, PDF, CSV and access via API.

Geospatial data about Fairfield County, Ohio Roads. Export to CAD, GIS, PDF, CSV and access via API.