Public Facing Web Application for Flood Zone in Brevard County

This hosted feature layer has been published in RI State Plane Feet NAD 83.Statewide flood hazard areas compiled from county-based Digital Flood Insurance Rate Map (DFIRM) databases for Rhode Island. The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. TheDFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA), and in this case redistributed by the Rhode Island Geographic Information System (RIGIS) at the request of the Rhode Island Emergency Management Agency.This dataset provides the user with information on the flood risk hazard zones throughout the state of Rhode Island. Note: the above summary is a slightly modified version adapted from source metadata records provided by FEMA. To provide the user with information on the statewide flood risk based on information provided by the Federal Emergency Management Agency (FEMA) in the DFIRM databases created specifically for the five counties of Rhode Island (Bristol, Kent, Newport, Providence, and Washington). This dataset provides information on the likelihood that a flood may occur at a given location in the state. The files and information used to create this dataset were originally provided to the Rhode Island Emergency Management Agency (RIEMA) by FEMA.This information was in the form of DFIRM databases for each of the five RI counties. This information was then redistributed by RIGIS at the request of RIEMA. The information provided by this data is only a subset of the information available in the original DFIRM databases located on the RIGIS website. For a specific county's complete DFIRM database, please visit the RIGIS website and download the appropriate DFIRM database. This metadata record is specific to this dataset and only contains information relevant to this dataset as provided by FEMA the original DFIRM metadata records. These can be found and referenced in the /DOCUMENT folder that is downloaded as part of a DFIRM package for a specific Rhode Island county. Another valuable source of documentation is FEMA's "Guidelines and Specifications for Flood Hazard Mapping Partners". It is currently available online at https://www.fema.gov/guidelines-and-standards-flood-risk-analysis-and-mapping. The Guide offers a tremendous amount of information regarding how DFIRM data are created, and detailed information about the individual files that constitute a DFIRM database.

According to FEMA the definition of a flood zone is a "geographic areas that FEMA has defined according to varying levels of flood risk and type of flooding. These zones are depicted on the published Flood Insurance Rate Map (FIRM) or Flood Hazard Boundary Map (FHBM)."

This dataset displays the locations of flood hazard zones identified by FEMA. The Federal Emergency Management Agency (FEMA) produces Flood Insurance Rate maps and identifies Special Flood Hazard Areas as part of the National Flood Insurance Program's floodplain management. Special Flood Hazard Areas have regulations that include the mandatory purchase of flood insurance. This layer is derived from the October 13, 2021 version of the National Flood Hazard Layer feature class S_Fld_Haz_Ar. The data were aggregated into eight classes to produce the Esri Symbology field based on symbology provided by FEMA. All other layer attributes are derived from the National Flood Hazard Layer.The layer was projected to Web Mercator Auxiliary Sphere, then the repair geometry geoprocessing tool was run on it. Its resolution was set to 0.0001 meter. To improve performance Flood Zone values "Area Not Included", "Open Water", "D", "NP", and No Data were removed from the layer. Areas with Flood Zone value "X" subtype "Area of Minimal Flood Hazard" were also removed. An imagery layer created from this dataset provides access to the full set of records in the National Flood Hazard Layer.View Dataset on the Gateway

FEMA provides access to the National Flood Hazards Layer (NFHL) through web mapping services. The maps depict effective flood hazard information and supporting data. The primary flood hazard classification is indicated in the Flood Hazard Zones layer.The NFHL layers include:Flood hazard zones and labelsRiver Miles MarkersCross-sections and coastal transects and their labelsLetter of Map Revision (LOMR) boundaries and case numbersFlood Insurance Rate Map (FIRM) boundaries, labels and effective datesCoastal Barrier Resources System (CBRS) and Otherwise Protected Area (OPA) unitsCommunity boundaries and namesLeveesHydraulic and flood control structuresProfile and coastal transect baselinesLimit of Moderate Wave Action(LiMWA)Not all effective Flood Insurance Rate Maps (FIRM) have GIS data available. To view a list of available county and single-jurisdiction flood study data in GIS format and check the status of the NFHL GIS services, please visit the NFHL Status Page.Preliminary & Pending National Flood Hazard LayersThe Preliminary and Pending NFHL dataset represents the current pre-effective flood data for the country. These layers are updated as new preliminary and pending data becomes available, and data is removed from these layers as it becomes effective.For more information, please visit FEMA's website.To download map panels or GIS Data, go to: NFHL on FEMA GeoPlatform.Preliminary & Pending DataPreliminary data are for review and guidance purposes only. By viewing preliminary data and maps, the user acknowledges that the information provided is preliminary and subject to change. Preliminary data are not final and are presented in this national layer as the best information available at this time. Additionally, preliminary data cannot be used to rate flood insurance policies or enforce the Federal mandatory purchase requirement. FEMA will remove preliminary data once pending data are available.Pending data are for early awareness of upcoming changes to regulatory flood map information. Until the data becomes effective, when it will appear in FEMA's National Flood Hazard Layer (NFHL), the data should not be used to rate flood insurance policies or enforce the Federal mandatory purchase requirement. FEMA will remove pending data once effective data are available.To better understand Preliminary data please see the View Your Community's Preliminary Flood Hazard Data webpage.FEMA GeoPlatformFEMA's GIS flood map services are available through FEMAs GeoPlatform, an ArcGIS Online portal containing a variety of FEMA-related data.To view the NFHL on the FEMA GeoPlatform go to NFHL on FEMA GeoPlatform.To view the Preliminary and Pending national layers on the FEMA Geoplatform go to FEMA's Preliminary & Pending National Flood Hazard Layer.Technical InformationFlood hazard and supporting data are developed using specifications for horizontal control consistent with 1:12,000–scale mapping. If you plan to display maps from the NFHL with other map data for official purposes, ensure that the other information meets FEMA’s standards for map accuracy.The minimum horizontal positional accuracy for base map hydrographic and transportation features used with the NFHL is the NSSDA radial accuracy of 38 feet. United States Geological Survey (USGS) imagery and map services that meet this standard can be found by visiting the Knowledge Sharing Site (KSS) for Base Map Standards (420). Other base map standards can be found at https://riskmapportal.msc.fema.gov/kss/MapChanges/default.aspx. You will need a username and password to access this information.The NFHL data are from FEMA’s FIRM databases. New data are added continually. The NFHL also contains map changes to FIRM data made by LOMRs.The NFHL is stored in North American Datum of 1983, Geodetic Reference System 80 coordinate system, though many of the NFHL GIS web services support the Web Mercator Sphere projection commonly used in web mapping applications.Organization & DisplayThe NFHL is organized into many data layers. The layers display information at map scales appropriate for the data. A layer indicating the availability of NFHL data is displayed at map scales smaller than 1:250,000, regional overviews at map scales between 1:250,000 and 1:50,000, and detailed flood hazard maps at map scales of 1:50,000 and larger. The "Scalehint" item in the Capabilities file for the Web Map Service encodes the scale range for a layer.In addition, there are non-NFHL datasets provided in the GIS web services, such as information about the availability of flood data and maps, the national map panel scheme, and point locations for LOMA and LOMR-Fs. The LOMA are positioned less accurately than are the NFHL data.Layers in the public NFHL GIS services:Use the numbers shown below when referencing layers by number.0. NFHL Availability1. LOMRs2. LOMAs3. FIRM Panels4. Base Index5. PLSS6. Toplogical Low Confidence Areas7. River Mile Markers8. Datum Conversion Points9. Coastal Gages10. Gages11. Nodes12. High Water Marks13. Station Start Points14. Cross-Sections15. Coastal Transects16. Base Flood Elevations17. Profile Baselines18. Transect Baselines19. Limit of Moderate Wave Action20. Water Lines21. Coastal Barrier Resources System Area22. Political Jurisdictions23. Levees24. General Structures25. Primary Frontal Dunes26. Hydrologic Reaches27. Flood Hazard Boundaries28. Flood Hazard Zones29. Submittal Information30. Alluvial Fans31. Subbasins32. Water Areas

The Flood Map for Planning Service includes several layers of information. This includes the Flood Zones data which shows the extent of land at present day risk of flooding from rivers and the sea, ignoring the benefits of defences, for the following scenarios:

• Flood Zone 1 – Land having a less than 0.1% (1 in 1000) annual probability of flooding. • Flood Zone 2 – Land having between 0.1% - 1% (1 in 100 to 1 in 1000) annual probability of flooding from rivers or between 0.1% - 0.5% (1 in 200 to 1 in 1000) annual probability of flooding from the sea, and accepted recorded flood outlines . • Flood Zone 3 – Areas shown to be at a 1% (1 in 100) or greater annual probability of flooding from rivers or 0.5% (1 in 200) or greater annual probability of flooding from the sea.

Flood Zone 1 is not shown in this dataset, but covers all areas not contained within Flood Zones 2 and 3. Local Planning Authorities (LPAs) use the Flood Zones to determine if they must consult the Environment Agency on planning applications. They are also used to determine if development is incompatible and whether development is subject to the exception test. The Flood Zones are one of several flood risk datasets used to determine the need for planning applications to be supported by a Flood Risk Assessment (FRA) and subject to the sequential test.

The Flood Zones are a composite dataset including national and local modelled data, and information from past floods.

The Flood Zones are designed to only give an indication of flood risk to an area of land and are not suitable for showing whether an individual property is at risk of flooding. This is because we cannot know all the details about each property.

Users of these datasets should always check they are suitable for the intended use

North Carolina Effective Flood Areas: In 2000, the Federal Emergency Management Agency (FEMA) designated North Carolina a Cooperating Technical Partner State (CTS), formalizing an agreement between FEMA and the State to modernize flood maps. This partnership resulted in creation of the North Carolina Floodplain Mapping Program (NCFMP). As a CTS, the State assumed primary ownership and responsibility of the Flood Insurance Rate Maps (FIRMs) for all North Carolina communities as part of the National Flood Insurance Program (NFIP). This project includes conducting flood hazard analyses and producing updated, Digital Flood Insurance Rate Maps (DFIRMs). Floodplain management is a process that aims to achieve reduced losses due to flooding. It takes on many forms, but is realized through a series of federal, state, and local programs and regulations, in concert with industry practice, to identify flood risk, implement methods to protect man-made development from flooding, and protect the natural and beneficial functions of floodplains. FIRMs are the primary tool for state and local governments to mitigate areas of flooding. Individual county databases can be downloaded from https://fris.nc.gov.The Flood Hazard Area is a polygon feature class representing the area within the flood mapping boundaries defined by the engineering models for the 100 year, 500 year and floodway. The Flood Hazard Area spatial table contains information about the flood hazard within the study area. These zones are used by FEMA to designate the Special Flood Hazard Area (SFHA), identify areas of coastal high hazard flooding, and for insurance rating purposes. These data are the flood hazard areas that are or will be depicted on the FIRM. Updated Sep 19th, 2025.

The National Flood Hazard Layer (NFHL) data incorporates all Digital Flood Insurance Rate Map(DFIRM) databases published by FEMA, and any Letters Of Map Revision (LOMRs) that have been issued against those databases since their publication date. The DFIRM Database is the digital, geospatial version of the flood hazard information shown on the published paper Flood Insurance Rate Maps(FIRMs). The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The NFHL data are derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The specifications for the horizontal control of DFIRM data are consistent with those required for mapping at a scale of 1:12,000. The NFHL data contain layers in the Standard DFIRM datasets except for S_Label_Pt and S_Label_Ld. The NFHL is available as State or US Territory data sets. Each State or Territory data set consists of all DFIRMs and corresponding LOMRs available on the publication date of the data set.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system.The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

A collection of citywide Geographic Information System (GIS) layers that show areas of potential flooding scenarios under varying sea level rise conditions. Please see the New York City Stormwater Resiliency Plan for more information about the methodology applied to develop the maps. Please direct questions or comments to StormwaterResiliency@cityhall.nyc.gov. This collection contains the following NYC Stormwater Flood Maps: NYC Stormwater Flood Map - Extreme Flood (3.66 inches/hr) with 2080 Sea Level Rise NYC Stormwater Flood Map - Moderate Flood (2.13 inches/hr) with 2050 Sea Level Rise NYC Stormwater Flood Map - Moderate Flood (2.13 inches/hr) with Current Sea Levels NYC Stormwater Flood Map - Limited Flood (1.77 inches/hr) with Current Sea Levels https://www1.nyc.gov/assets/orr/pdf/publications/stormwater-resiliency-plan.pdf Source Data: http://nyc.gov/stormwater-map

[Metadata] Tropical storms, hurricanes, and tsunamis create waves that flood low-lying coastal areas. The National Flood Insurance Program (NFIP) produces flood insurance rate maps (FIRMs) that depict flood risk zones referred to as Special Flood Hazard Areas (SFHA) based modeling 1%-annual-chance flood event also referred to as a 100-year flood. The purpose of the FIRM is twofold: (1) to provide the basis for application of regulatory standards and (2) to provide the basis for insurance rating.SFHAs identify areas at risk from infrequent but severe storm-induced wave events and riverine flood events that are based upon historical record. By law (44 Code of Federal Regulations [CFR] 60.3), FEMA can only map flood risk that will be utilized for land use regulation or insurance rating based on historical data, therefore, future conditions with sea level rise and other impacts of climate change are not considered in FIRMs. It is important to note that FEMA can produce Flood Insurance Rate Maps that include future condition floodplains, but these would be considered “awareness” zones and not to be used for regulatory of insurance rating purposes.The State of Hawai‘i 2018 Hazard Mitigation Plan incorporated the results of modeling and an assessment of vulnerability to coastal flooding from storm-induced wave events with sea level rise (Tetra Tech Inc., 2018). The 1% annual-chance-coastal flood zone with sea level rise (1%CFZ) was modeled to estimate coastal flood extents and wave heights for wave-generating events with sea level rise. Modeling was conducted by Sobis Inc. under State of Hawaiʻi Department of Land and Natural Resources Contract No: 64064. The 1%CFZ with 3.2 feet of sea level rise was utilized to assess vulnerability to coastal event-based flooding in mid to - late century.The 1%CFZ with sea level rise would greatly expand the impacts from a 100-year flood event meaning that more coastal land area will be exposed to damaging waves. For example, over 120 critical infrastructure facilities in the City and County of Honolulu, including water, waste, and wastewater systems and communication and energy facilities would be impacted in the 1%CFZ with 3.2 feet of sea level rise (Tetra Tech Inc., 2018). This is double the number of facilities in the SFHA which includes the impacts of riverine flooding.A simplified version of the Wave Height Analysis for Flood Insurance Studies (WHAFIS) extension (FEMA, 2019b) included in Hazus-MH, was used to create the 1% annual chance coastal floodplain. Hazus is a nationally applicable standardized methodology that contains models for estimating potential losses from earthquakes, floods, tsunamis, and hurricanes (FEMA, 2019a). The current 1%-annual-chance stillwater elevations were collected using the most current flood insurance studies (FIS) for each island conducted by FEMA (FEMA, 2004, 2010, 2014, 2015). The FIS calculates the 1%-annual-chance stillwater elevation, wave setup, and wave run-up (called maximum wave crest) at regularly-spaced transects around the islands based on historical data. Modeling for the 1%CFZ used the NOAA 3-meter digital elevation model (DEM) which incorporates LiDAR data sets collected between 2003 and 2007 from NOAA, FEMA, the State of Hawaiʻi Emergency Management Agency, and the USACE (NOAA National Centers for Environmental Information, 2017).Before Hazus was run for future conditions, it was run for the current conditions and compared to the FEMA regulatory floodplain to determine model accuracy. This also helped determine the stillwater elevation for the large gaps between some transects in the FIS. Hazus was run at 0.5-foot stillwater level intervals and the results were compared to the existing Flood Insurance Rate Map (FIRM). The interval of 0.5-feet was chosen as a small enough step to result in a near approximation of the FIRM while not being too impractically narrow to require the testing of dozens of input elevations. The elevation which matched up best was used as the current base flood elevation.Key steps in modeling the projected 1%CFZ with sea level rise include: (1) generating a contiguous (no gaps along the shoreline) and present-day 1%-annual-chance stillwater elevation based on the most recent FIS, (2) elevating the present-day 1%-annual-chance stillwater elevation by adding projected sea level rise heights, and (3) modeling the projected 1%-annual-chance coastal flood with sea level rise in HAZUS using the 1%-annual-chance wave setup and run-up from the FIS. The 1%CFZ extent and depth was generated using the HAZUS 3.2 coastal flood risk assessment model, 3-meter DEM, the FIS for each island, and the IPCC AR5 upper sea level projection for RCP 8.5 scenario for 0.6 feet, 1.0 feet, 2.0 feet, and 3.2 feet of sea level rise above MHHW (IPCC, 2014). The HAZUS output includes the estimated spatial extent of coastal flooding as well as an estimated flood depth map grid for the four sea level rise projections.Using the current floodplain generated with Hazus, the projected 1%-annual-chance stillwater elevation was generated using the four sea level rise projections. This stillwater elevation with sea level rise was used as a basis for modeling. The projected 1%-annual coastal flood with sea level rise was modeled in Hazus using the current 1%-annual-chance wave setup and run-up from the FIS and the projected 1%-annual-chance stillwater elevation with sea level rise. Statewide GIS Program staff extracted individual island layers for ease of downloading. A statewide layer is also available as a REST service, and is available for download from the Statewide GIS geoportal at https://geoportal.hawaii.gov/, or at the Program's legacy download site at https://planning.hawaii.gov/gis/download-gis-data-expanded/#009. For additional information, please refer to summary metadata at https://files.hawaii.gov/dbedt/op/gis/data/coastal_flood_zones_summary.pdf or contact Hawaii Statewide GIS Program, Office of Planning and Sustainable Development, State of Hawaii; PO Box 2359, Honolulu, Hi. 96804; (808) 587-2846; email: gis@hawaii.gov.

The Historic Flood Map is a GIS layer showing the maximum extent of individual Recorded Flood Outlines from river, the sea and groundwater springs that meet a set criteria. It shows areas of land that have previously been subject to flooding in England. This excludes flooding from surface water, except in areas where it is impossible to determine whether the source is fluvial or surface water but the dominant source is fluvial.

The majority of records began in 1946 when predecessor bodies to the Environment Agency started collecting detailed information about flooding incidents, although we hold limited details about flooding incidents prior to this date.

If an area is not covered by the Historic Flood Map it does not mean that the area has never flooded, only that we do not currently have records of flooding in this area that meet the criteria for inclusion. It is also possible that the pattern of flooding in this area has changed and that this area would now flood or not flood under different circumstances. Outlines that don’t meet this criteria are stored in the Recorded Flood Outlines dataset.

The Historic Flood Map takes into account the presence of defences, structures, and other infrastructure where they existed at the time of flooding. It will include flood extents that may have been affected by overtopping, breaches or blockages.

Flooding is shown to the land and does not necessarily indicate that properties were flooded internally.

These data represent a subset of the data available on the paper Flood Insurance Rate Maps (FIRM) as provided by the Federal Emergency Management Agency (FEMA). The Q3 flood data were developed to support floodplain management and planning activities but do not replace the official paper FIRMs. These data are not suitable for engineering applications or site work nor can the data be used to determine absolute delineation of flood boundaries. Instead the data should be used to portray zones of uncertainty and possible risks associated with flooding.** This service includes data only for areas for which the newer National Flood Hazard Layer are not available. **Map service is also available.

From the Flood Risk Non-Regulatory Database that went into effect June 5, 2020. For more information, visit FEMA.gov Flood Maps.Flood Hazard Zones: The FIRM is the basis for floodplain management, mitigation, and insurance activities for the National Flood Insurance Program (NFIP). Insurance applications include enforcement of the mandatory purchase requirement of the Flood Disaster Protection Act, which "... requires the purchase of flood insurance by property owners who are being assisted by Federal programs or by Federally supervised, regulated or insured agencies or institutions in the acquisition or improvement of land facilities located or to be located in identified areas having special flood hazards," Section 2 (b) (4) of the Flood Disaster Protection Act of 1973. In addition to the identification of Special Flood Hazard Areas (SFHAs), the risk zones shown on the FIRMs are the basis for the establishment of premium rates for flood coverage offered through the NFIP. The DFIRM Database presents the flood risk information depicted on the FIRM in a digital format suitable for use in electronic mapping applications. The DFIRM database is a subset of the Digital FIS database that serves to archive the information collected during the FIS.The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.Flood Hazard Boundary Line: Boundary line dividing Special Flood Hazard Area Zones and boundary dividing Special Flood Hazard Areas of different Base Flood Elevations, flood Depths or flood velocities.Flood Hazard BFE: Location and attributes for base flood elevations lines shown on DFIRM. This line layer was converted to a polygon by COM GIS department.Flood Hazard Cross Section: Location and attributes for cross-section lines in the area covered by the DFIRM.Flood Hazard Map Index: Location and attributes for DFIRM hardcopy map panels.Use limitationsThe hardcopy FIRM and DFIRM and the accompanying FISs are the official designation of SFHAs and Base Flood Elevations (BFEs) for the NFIP. For the purposes of the NFIP, changes to the flood risk information published by FEMA may only be performed by FEMA and through the mechanisms established in the NFIP regulations (44 CFR Parts 59-78). These digital data are produced in conjunction with the hardcopy FIRMs and generally match the hardcopy map exactly. However the hardcopy flood maps and flood profiles are the authoritative documents for the NFIP. Acknowledgement of FEMA would be appreciated in products derived from these data.

Flood is the most devastating and prevalent disaster among all-natural disasters. Every year, flood claims hundreds of human lives and causes damage to the worldwide economy and environment. Consequently, the identification of flood-vulnerable areas is important for comprehensive flood risk management. The main objective of this study is to delineate flood-prone areas in the Panjkora River Basin (PRB), eastern Hindu Kush, Pakistan. An initial extensive field survey and interpretation of Landsat-7 and Google Earth images identified 154 flood locations that were inundated in 2010 floods. Of the total, 70% of flood locations were randomly used for building a model and 30% were used for validation of the model. Eight flood parameters including slope, elevation, land use, Normalized Difference Vegetation Index (NDVI), topographic wetness index (TWI), drainage density, and rainfall were used to map the flood-prone areas in the study region. The relative frequency ratio was used to determine the correlation between each class of flood parameter and flood occurrences. All of the factors were resampled into a pixel size of 30×30 m and were reclassified through the natural break method. Finally, a final hazard map was prepared and reclassified into five classes, i.e., very low, low, moderate, high, very high susceptibility. The results of the model were found reliable with area under curve values for success and prediction rate of 82.04% and 84.74%, respectively. The findings of this study can play a key role in flood hazard management in the target region; they can be used by the local disaster management authority, researchers, planners, local government, and line agencies dealing with flood risk management.

More MetadataMaintenance and Update Frequency: Floodplain boundaries are updated by Building and Development staff as detailed floodplain studies are submitted and floodplain alterations are approved and structures are built in association with land development applications.Abstract: The regulatory floodplain boundary reflects the limits of flooding resulting from a storm having an occurrence probability of 1% in any given year, identified as the 100-year storm. The floodplain boundary was was revised on February 17, 2017 for consistency with FEMA’s National Floodplain Hazard.Purpose: Floodplain data are used to establish a Floodplain Overlay District (FOD) as defined in the Zoning Ordinance of Loudoun County, which restricts the allowable uses within the regulatory floodplain. Data are used to establish flood risk factors and eligibility to participate in the National Flood Insurance Program. Floodplain data are also used in land use planning and for taxation of land.Note: Users should beware of the dynamic nature of floodplains and floodplain mapping when using this data. Our floodplain boundaries are based on the best available information, but are still approximate in many areas where detailed studies have not been conducted.Completeness Report: Floodplain data is incomplete countywide due to unavailability of data within Town and Dulles International Airport limits. Features may have been eliminated or generalized due to scale and intended use. To assist Loudoun County, Virginia in the maintenance of the data, please provide any information concerning discovered errors, omissions, or other discrepancies found in the data.Flood Plains:Major Flood Plain = Drain Area > 640 AcresMinor Flood Plain = Drain Area > 100 Acres and < or = 640 AcresApp. Num: The associated Loudoun County Application NumberData Owner: Department of Building and Development