The maps and tables presented here represent potential variability of projected climate change across the conterminous United States during three 30-year periods in this century and emphasizes the importance of evaluating multiple signals of change across large spatial domains. Maps of growing degree days, plant hardiness zones, heat zones, and cumulative drought severity depict the potential for markedly shifting conditions and highlight regions where changes may be multifaceted across these metrics. In addition to the maps, the potential change in these climate variables are summarized in tables according to the seven regions of the fourth National Climate Assessment to provide additional regional context. Viewing these data collectively further emphasizes the potential for novel climatic space under future projections of climate change and signals the wide disparity in these conditions based on relatively near-term human decisions of curtailing (or not) greenhouse gas emissions. More information available at https://www.fs.usda.gov/nrs/pubs/rmap/rmap_nrs9.pdf. This dataset represents heat zones, or the mean number of days over 30 C, in 4 time periods (1980-2009, 2010-2039, 2040-2069, and 2070-2099), using two emissions scenarios (RCP 4.5 and 8.5, the medium and high scenarios, respectively).

Notice: this is not the latest Heat Island Severity image service. For 2023 data, visit https://tpl.maps.arcgis.com/home/item.html?id=db5bdb0f0c8c4b85b8270ec67448a0b6. This layer contains the relative heat severity for every pixel for every city in the United States. This 30-meter raster was derived from Landsat 8 imagery band 10 (ground-level thermal sensor) from the summers of 2018 and 2019.Federal statistics over a 30-year period show extreme heat is the leading cause of weather-related deaths in the United States. Extreme heat exacerbated by urban heat islands can lead to increased respiratory difficulties, heat exhaustion, and heat stroke. These heat impacts significantly affect the most vulnerable—children, the elderly, and those with preexisting conditions.The purpose of this layer is to show where certain areas of cities are hotter than the average temperature for that same city as a whole. Severity is measured on a scale of 1 to 5, with 1 being a relatively mild heat area (slightly above the mean for the city), and 5 being a severe heat area (significantly above the mean for the city). The absolute heat above mean values are classified into these 5 classes using the Jenks Natural Breaks classification method, which seeks to reduce the variance within classes and maximize the variance between classes. Knowing where areas of high heat are located can help a city government plan for mitigation strategies.This dataset represents a snapshot in time. It will be updated yearly, but is static between updates. It does not take into account changes in heat during a single day, for example, from building shadows moving. The thermal readings detected by the Landsat 8 sensor are surface-level, whether that surface is the ground or the top of a building. Although there is strong correlation between surface temperature and air temperature, they are not the same. We believe that this is useful at the national level, and for cities that don’t have the ability to conduct their own hyper local temperature survey. Where local data is available, it may be more accurate than this dataset. Dataset SummaryThis dataset was developed using proprietary Python code developed at The Trust for Public Land, running on the Descartes Labs platform through the Descartes Labs API for Python. The Descartes Labs platform allows for extremely fast retrieval and processing of imagery, which makes it possible to produce heat island data for all cities in the United States in a relatively short amount of time.What can you do with this layer?This layer has query, identify, and export image services available. Since it is served as an image service, it is not necessary to download the data; the service itself is data that can be used directly in any Esri geoprocessing tool that accepts raster data as input.Using the Urban Heat Island (UHI) Image ServicesThe data is made available as an image service. There is a processing template applied that supplies the yellow-to-red or blue-to-red color ramp, but once this processing template is removed (you can do this in ArcGIS Pro or ArcGIS Desktop, or in QGIS), the actual data values come through the service and can be used directly in a geoprocessing tool (for example, to extract an area of interest). Following are instructions for doing this in Pro.In ArcGIS Pro, in a Map view, in the Catalog window, click on Portal. In the Portal window, click on the far-right icon representing Living Atlas. Search on the acronyms “tpl” and “uhi”. The results returned will be the UHI image services. Right click on a result and select “Add to current map” from the context menu. When the image service is added to the map, right-click on it in the map view, and select Properties. In the Properties window, select Processing Templates. On the drop-down menu at the top of the window, the default Processing Template is either a yellow-to-red ramp or a blue-to-red ramp. Click the drop-down, and select “None”, then “OK”. Now you will have the actual pixel values displayed in the map, and available to any geoprocessing tool that takes a raster as input. Below is a screenshot of ArcGIS Pro with a UHI image service loaded, color ramp removed, and symbology changed back to a yellow-to-red ramp (a classified renderer can also be used): Other Sources of Heat Island InformationPlease see these websites for valuable information on heat islands and to learn about exciting new heat island research being led by scientists across the country:EPA’s Heat Island Resource CenterDr. Ladd Keith, University of Arizona Dr. Ben McMahan, University of Arizona Dr. Jeremy Hoffman, Science Museum of Virginia Dr. Hunter Jones, NOAADaphne Lundi, Senior Policy Advisor, NYC Mayor's Office of Recovery and ResiliencyDisclaimer/FeedbackWith nearly 14,000 cities represented, checking each city's heat island raster for quality assurance would be prohibitively time-consuming, so The Trust for Public Land checked a statistically significant sample size for data quality. The sample passed all quality checks, with about 98.5% of the output cities error-free, but there could be instances where the user finds errors in the data. These errors will most likely take the form of a line of discontinuity where there is no city boundary; this type of error is caused by large temperature differences in two adjacent Landsat scenes, so the discontinuity occurs along scene boundaries (see figure below). The Trust for Public Land would appreciate feedback on these errors so that version 2 of the national UHI dataset can be improved. Contact Dale.Watt@tpl.org with feedback.

Learn more about the project and how to use the canopy assessment data by visiting the StoryMap!

Data Dictionary

Heat Stress Index, compared between historical and future time periods, including historical and percent change

The following dataset includes "Active Benchmarks," which are provided to facilitate the identification of City-managed standard benchmarks. Standard benchmarks are for public and private use in establishing a point in space. Note: The benchmarks are referenced to the Chicago City Datum = 0.00, (CCD = 579.88 feet above mean tide New York). The City of Chicago Department of Water Management’s (DWM) Topographic Benchmark is the source of the benchmark information contained in this online database. The information contained in the index card system was compiled by scanning the original cards, then transcribing some of this information to prepare a table and map. Over time, the DWM will contract services to field verify the data and update the index card system and this online database.This dataset was last updated September 2011. Coordinates are estimated. To view map, go to https://data.cityofchicago.org/Buildings/Elevation-Benchmarks-Map/kmt9-pg57 or for PDF map, go to http://cityofchicago.org/content/dam/city/depts/water/supp_info/Benchmarks/BMMap.pdf. Please read the Terms of Use: http://www.cityofchicago.org/city/en/narr/foia/data_disclaimer.html.

UpdateWithTime_XYTableToPoint

London Heat Map The London Heatmap is a map-based web application you can use to find and appraise opportunities for decentralised energy (DE) projects in London. The map covers the whole of Greater London, and provides very local information to help you identify and develop DE opportunities, including data such as: Locations of existing and proposed district heating networks Locations of potential heat supply sites The London Heat Map is used by a wide variety of people in numerous ways: London Boroughs can use the new map to help develop their energy master plans. Property developers can use the map to help them meet the decentralised energy policies in the London Plan. Energy consultants can use the map to gather initial data to inform feasibility studies. More information is available here, and an interactive map is available here. The Decentralised Energy Master planning programme (DEMaP) The Decentralised Energy Master planning programme (DEMaP), was completed in October 2010. It included a heat mapping support package for the London boroughs to enable them to carry out high resolution heat mapping for their area. To date, heat maps have been produced for 29 London boroughs with the remaining four boroughs carrying out their own data collection. All of the data collected through this process is provided below. Carbon Calculator Tool Arup have produced a Carbon Calculator Tool to assist projects in their early estimation of the carbon dioxide (CO2) savings which could be realised by a district heating scheme with different sources of heating. The calculator's estimates include the impact of a decarbonising the electrical grid over time, based on projections by the Department for Energy and Climate Change, as well as the Government's Standard Assessment Procedure (SAP). The Excel-based tool can be downloaded below. Borough Heat Maps Data and Reports (2012) In March 2012, all London boroughs did a heat mapping exercise. The data from this includes the following and can be downloaded below: Heat Load for all boroughs Heat Supplies for all boroughs Heat Network LDD 2010 database Complete GIS London Heat Map Data The heat maps contain real heat consumption data for priority buildings such as hospitals, leisure centres and local authority buildings. As part of this work, each of the boroughs developed implementation plans to help them take the DE opportunities identified to the next stages. The implementation plans include barriers and opportunities, actions to be taken by the council, key dates, personnel responsible. These can be downloaded below. London Heat Network Manual London Heat Network Manual II

In this blog I’ll share the workflow and tools used in the GIS part of this analysis. To understand where crashes are occurring, first the dataset had to be mapped. The software of choice in this instance was ArcGIS, though most of the analysis could have been done using QGIS. Heat maps are all the rage, and if you want to make simple heat maps for free and you appreciate good documentation, I recommend the QGIS Heatmap plugin. There are also some great tools in the free open-source program GeoDa for spatial statistics.

Area-wide modeled near-surface heat index for 6-7 am on July 27, 2020, based on temperature and humidity data collected for a one-day heat mapping project conducted by King County, Seattle Public Utilities, and the City of Seattle. Data collected on July 27, 2020 in partnership with project volunteers and CAPA Strategies. Data analysis and maps produced by CAPA strategies. This predictive temperature model was created from multi-band land cover rasters from Sentinel-2 satellite and raw heat data from sensor SD cards using the 70:30 holdout method.Heat maps also available for 6-7 am and 7-8 pm. Results can be viewed using this ArcGIS web app viewer. More information on the project available in Heat Watch Report for Seattle & King County. Contact CAPA Strategies for questions on the data, maps, and data analysis methods.

The Scotland Heat Map is a tool to help plan for the reduction of carbon emissions from heat in buildings. This service allows users to view layers from the map using their GIS software. The Scotland Heat Map is produced by the Scottish Government. The most recent version is the Scotland Heat Map 2022, which was released to local authorities in November 2023. More information can be found in the documentation available on the Scottish Government website: https://www.gov.scot/publications/scotland-heat-map-documents/

Learn more about the project and how to use the canopy assessment data by visiting the StoryMap!

Data Dictionary

High resolution (10 meter) land surface temperature (LST) from September 1, 2022 is mapped for the seven-county metropolitan region of the Twin Cities. The goal of the map is to show the heat differences across the region and is not intended to show the maximum temperature that any specific area can reach. The raster dataset was computed at 30 meters using satellite imagery from Landsat 9 and downscaled to 10 meters using Copernicus Sentinel-2. These datasets were integrated using techniques modified from Ermida et al. 2020 and Onačillová et al. 2022). Open water was removed using ancillary data from OpenStreetMap and 2020 Generalized Land Use for the Twin Cities (Metropolitan Council).

First, Landsat 9 imagery taken at 11:59 am CDT on September 01, 2022 was processed into 30-meter resolution LST (based on Ermida et al. 2020). At this time, the air temperature was 88° F at the Minneapolis-St. Paul International Airport (NOAA). A model predicting LST based on spectral indices of Normalized Difference Vegetation Index (NDVI), Normalized Difference Water Index (NDWI), and Normalized Difference Built-up Index (NDBI) was created and applied to 10-meter Sentenel-2 imagery. Sentinel-2 imagery was also taken on September 1, 2022, and this resulted in a 10-meter downscaled LST image (based on Onačillová et al. 2022). To account for anomalies in NDVI on the primary image date of September 1 (e.g., recently harvested agricultural fields), maximum NDVI occurring between July 1, 2022 and September 1, 2022 was used for both Landsat and Sentinel image processing. Water bodies were removed for all processing steps (OpenStreetMap 2023, Metropolitan Council 2021).

This dataset is an update to the 2016 LST data for the Twin Cities Region (Metropolitan Council).

The code to create and processes this dataset is available at: https://github.com/Metropolitan-Council/extreme.heat

Sources:
Ermida, S.L., Soares, P., Mantas, V., Göttsche, F.-M., Trigo, I.F., 2020. Google Earth Engine open-source code for Land Surface Temperature estimation from the Landsat series. Remote Sensing, 12 (9), 1471; https://doi.org/10.3390/rs12091471.

Metropolitan Council. 2021. Generalized Land Use 2020. Minnesota Geospatial Commons. https://gisdata.mn.gov/dataset/us-mn-state-metc-plan-generl-lnduse2020

Metropolitan Council. 2017. Land Surface Temperature for Climate Vulnerability Analysis. Minnesota Geospatial Commons. https://gisdata.mn.gov/dataset/us-mn-state-metc-env-cva-lst2016

NOAA, National Oceanic and Atmospheric Administration, National Centers for Environmental Information, station USW00014922. September 1, 2022.

Onačillová, K., Gallay, M., Paluba, D., Péliová, A., Tokarčík, O., Laubertová, D. 2022. Combining Landsat 8 and Sentinel 2 data in Google Earth Engine to derive higher resolution land surface temperature maps in urban environment. Remote Sensing, 14 (16), 4076. https://doi.org/10.3390/rs14164076.

OpenStreetMap contributors. 2023. Retrieved from https://planet.openstreetmap.org on April 12, 2023.

Under the Natural Capital and Ecosystem Assessment (NCEA) Pilot, Natural England and the Botanical Society of Britain and Ireland (BSBI) have been working in partnership to use BSBI's vast database of plant records to inform the evidence base for tree-planting activities. Poorly targeted tree planting risks damaging wildlife and carbon-rich habitats, therefore using these data we aim to ensure that areas of high conservation value are preserved in the landscape. The summarised botanical value map provides an easily interpretable output which categorises monads (1 x 1 km grid squares) as being of Low, Moderate or High botanical value according to the presence of Rare, Scarce and Threatened (RST) plant species and/or the proportion of Priority Habitat Positive Indicator (PHPI) species that were recorded within the 1 x 1 km grid square between 1970 and 2022. The PHPI species are a combination of BSBI axiophytes, positive indicators for common standards monitoring and ancient woodland indicators. The dataset includes an overall botanical value, as well as values based on only the presence of RST plant species, and a value for each broad habitat type based on the PHPI species records. By viewing the different attributes, you can gain insights into how valuable a monad is for different habitat types and for plant species of conservation concern, as well as an indication of how well a particular monad has been surveyed. The categories of 'No indicators, poor survey coverage' and 'No indicators, good survey coverage' indicate where no indicator species have been recorded and survey coverage either is above or below a threshold of 3 'recorder days'. A 'recorder day' is defined as being when 40 or more species have been recorded on a single visit and 3 recorder days is assumed sufficient to achieve good survey coverage within a 1 x 1 km grid square. This map is not intended to be used to carry out detailed assessments of individual site suitability for tree planting, for which the RST plant species heatmap at 100 x 100 m resolution and the PHPI heatmaps at 1 x 1 km resolution have been developed by BSBI and Natural England. However, the summarised botanical value map can provide useful insights at a strategic landscape scale, to highlight monads of high value for vascular plants and inform spatial planning and prioritisation, and other land management decision-making. These should be used alongside other environmental datasets and local knowledge to ensure decisions are supported by the appropriate evidence. Please get in contact if you have any queries about the data or appropriate uses at botanicalheatmaps@naturalengland.org.uk.Datasets used:BSBI botanical heatmap data - BSBIOS Grids - OSONS Country boundaries - ONSCommon Standards Monitoring guidance - JNCC 2004BSBI's Axiophyte list - Walker 2018Ancient Woodland Indicators - Glaves et al. 2009Plantatt - Hill et al. 2004Further information can be found in the technical report at:Botanical Heatmaps and the Botanical Value Map: Technical Report (NERR110)Full metadata can be viewed on data.gov.uk.

Topeka Pedestrian Priority Area Heat Map

Public, Non-Profit, and Private Service Locations within San Mateo County. This data was developed once and is maintained in an as needed basis.

London Heat Map --------------- The London Heat Map is a tool designed to help you identify areas of high heat demand, explore opportunities for new and expanding district heat networks and to draw potential heat networks and assess their financial feasibility. The new version of the London Heat Map was created for the Greater London Authority by the Centre for Sustainable Energy (CSE) in July 2019. The London Heat Map is regularly updated with new network data and other datasets. Background datasets such as building heat demand was last updated on 26/06/2023. The London Heatmap is a map-based web application you can use to find and appraise opportunities for decentralised energy (DE) projects in London. The map covers the whole of Greater London, and provides very local information to help you identify and develop DE opportunities, including data such as: * Heat demand values for each building * Locations of potential heat supply sites * Locations of existing and proposed district heating networks * A spatial heat demand density map layer The map also includes a user-friendly visual tool for heat network design. This is intended to support preliminary techno-economic appraisal of potential district heat networks. The London Heat Map is used by a wide variety of people in numerous ways: * London Boroughs can use the new map to help develop their energy master plans. * Property developers can use the map to help them meet the decentralised energy policies in the London Plan. * Energy consultants can use the map to gather initial data to inform feasibility studies. More information is available here, and an interactive map is available here. Building-level estimated annual and peak heat demand data from the London Heat Map has been made available through the data extracts below. The data was last updated on 26/06/2023. The data contains Ordnance Survey mapping and the data is published under Ordnance Survey's 'presumption to publish'. © Crown copyright and database rights 2023. The Decentralised Energy Master planning programme (DEMaP) ---------------------------------------------------------- The Decentralised Energy Master planning programme (DEMaP), was completed in October 2010. It included a heat mapping support package for the London boroughs to enable them to carry out high resolution heat mapping for their area. To date, heat maps have been produced for 29 London boroughs with the remaining four boroughs carrying out their own data collection. All of the data collected through this process is provided below. ### Carbon Calculator Tool Arup have produced a Carbon Calculator Tool to assist projects in their early estimation of the carbon dioxide (CO2) savings which could be realised by a district heating scheme with different sources of heating. The calculator's estimates include the impact of a decarbonising the electrical grid over time, based on projections by the Department for Energy and Climate Change, as well as the Government's Standard Assessment Procedure (SAP). The Excel-based tool can be downloaded below. ### Borough Heat Maps Data and Reports (2012) In March 2012, all London boroughs did a heat mapping exercise. The data from this includes the following and can be downloaded below: * Heat Load for all boroughs * Heat Supplies for all boroughs * Heat Network * LDD 2010 database * Complete GIS London Heat Map Data The heat maps contain real heat consumption data for priority buildings such as hospitals, leisure centres and local authority buildings. As part of this work, each of the boroughs developed implementation plans to help them take the DE opportunities identified to the next stages. The implementation plans include barriers and opportunities, actions to be taken by the council, key dates, personnel responsible. These can be downloaded below. Other Useful Documents ---------------------- Other useful documents can be downloaded from the links below: Energy Masterplanning Manual Opportunities for Decentralised Energy in London - Vision Map London Heat Network Manual London Heat Network Manual II

The Kernel Density tool calculates the density of features in a neighborhood around those features.Kernel Density calculates the density of point features around each output raster cell. Conceptually, a smoothly curved surface is fitted over each point. The surface value is highest at the location of the point and diminishes with increasing distance from the point, reaching zero at the Search radius distance from the point. Only a circular neighborhood is possible. The volume under the surface equals the Population field value for the point, or 1 if NONE is specified. The density at each output raster cell is calculated by adding the values of all the kernel surfaces where they overlay the raster cell center. This layer is included in a storymap about the Panama City crayfish, a species listed as Threatened under the Endangered Species Act in 2022. Storymap link: https://fws.maps.arcgis.com/home/item.html?id=a791906fe3f8433eabadda5898184372

Urban heat islands are small areas where temperatures are unnaturally high - usually due to dense buildings, expansive hard surfaces, or a lack of tree cover or greenspace. People living in these communities are exposed to more dangerous conditions, especially as daytime high and nighttime low temperatures increase over time. NOAA Climate Program Office and CAPA Strategies have partnered with cities around the United States to map urban heat islands. The NOAA Visualization Lab, part of the NOAA Satellite and Information Service, has made the original heat mapping data available as feature services.

The maps and tables presented here represent potential variability of projected climate change across the conterminous United States during three 30-year periods in this century and emphasizes the importance of evaluating multiple signals of change across large spatial domains. Maps of growing degree days, plant hardiness zones, heat zones, and cumulative drought severity depict the potential for markedly shifting conditions and highlight regions where changes may be multifaceted across these metrics. In addition to the maps, the potential change in these climate variables are summarized in tables according to the seven regions of the fourth National Climate Assessment to provide additional regional context. Viewing these data collectively further emphasizes the potential for novel climatic space under future projections of climate change and signals the wide disparity in these conditions based on relatively near-term human decisions of curtailing (or not) greenhouse gas emissions. More information available at https://www.fs.usda.gov/nrs/pubs/rmap/rmap_nrs9.pdf.This record was taken from the USDA Enterprise Data Inventory that feeds into the https://data.gov catalog. Data for this record includes the following resources: ISO-19139 metadata ArcGIS Hub Dataset ArcGIS GeoService For complete information, please visit https://data.gov.

This dataset consists of summer temperature metrics for Boston, MA. These heat metrics summarize six CAPA Urban Heat Watch program temperature and heat index datasets using geographical boundaries from the Census Tract (CT) layer. Heat datasets were created by Museum of Science, Boston, and the Helmuth Lab at Northeastern University. Heat metrics are presented in the attribute table as mean values of each Heat Watch program dataset for all hexagon features. The six heat values included in this table are July 2019 temperature and heat index in degrees Fahrenheit for each of 3 1-hour periods -- 6 a.m., 3 p.m., and 7 p.m. EDT. The geographic boundaries used to summarize the heat metrics are current as of 2019.