This website provides a limited number of Substructure Maps in “pdf” format via GIS polygons representing grids containing URL links. Across various areas of Los Angeles County, paper maps were created by Public Works (PW) and its predecessor Departments to show underground utilities such as cable TV, gas, oil, and telephone lines.

Though most of these maps are no longer updated, they can be useful as a research resource. Every reasonable effort has been made to assure the accuracy of this data and the maps referenced. Some cities may provide substructure information for the areas not covered by these grids. Additional and more accurate substructure data and information may also be obtained through the utility companies. Before digging, it is strongly advised to contact the Underground Service Alert (DigAlert Express) at www.digalert.org/digexpress.html or by calling 811.

Please note that California State Law Says, You Must Contact DigAlert!

The County of Los Angeles makes no warranty, representation, or guarantee as to the content, sequence, accuracy, timeliness, or completeness of any of the data provided herein or of any maps referenced. Los Angeles County Public Works recommends that all utility research be conducted under the supervision of a licensed civil engineer.

This is the zoning layer for UNINCORPORATED areas of Los Angeles County. It does not draw at all scales because there are lots of records (so basically for speed and performance), so it is scale dependent. Also, why only for UNINCORPORATED areas? Because there are 88 cities in L.A. County and they each manage their zoning and land use information separately.

For more complete information, see Title 22 (Planning and Zoning) of the Los Angeles County Code, or visit the Department of Regional Planning's website here.

PLEASE NOTE: Santa Catalina Island is not included in this dataset. It is in a separate data layer since Catalina has specific zoning categories that differ from the Countywide zoning categories found in Title 22. The Department of Regional Planning performs all land use planning functions for the UNINCORPORATED areas of Los Angeles County. Our services include long range planning, land development counseling, project/case intake and processing, environmental review and zoning enforcement for each of our County UNINCORPORATED communities.What is an UNINCORPORATED area of Los Angeles County?There are 88 incorporated cities within Los Angeles County, each with its own city council. The areas that are NOT part of these cities are considered to be UNINCORPORATED County territory. More than 65 percent of Los Angeles County is UNINCORPORATED. For the approximately 1 million people living in these areas, the Board of Supervisors and County departments provide the municipal services.LAST UPDATED: 4/9/25 for several zone changes related to the South Bay, West San Gabriel, and Westside Area Plan updates. These updates took effect on 4/10/25.NEED MORE FUNCTIONALITY? If you are looking for more layers or advanced tools and functionality, then try our suite of GIS Web Mapping Applications.

The polylines represent underground utilities such as cable TV, gas, oil, and telephone lines across various areas of Los Angeles County. All data were collected from LA County Substructure Grid Maps drawing. The utility lines are from cities that were contracted with LA County. To download the hardcopy maps, please visit: Los Angeles County Substructure Maps | County of Los Angeles Open Datahttps://egis-lacounty.hub.arcgis.com/maps/los-angeles-county-substructure-maps-1/explore?location=34.094631%2C-118.256950%2C7.82Every reasonable effort has been made to assure the accuracy of this data and the maps referenced. Some cities may provide substructure information for the areas not covered by our map grids. Additional and more accurate substructure data and information may also be obtained through the utility companies. The County of Los Angeles makes no warranty, representation, or guarantee as to the content, sequence, accuracy, timeliness, or completeness of any of the data provided herein or of any maps referenced. Los Angeles County Public Works recommends that all utility research be conducted under the supervision of a licensed civil engineer.

Official City Boundary for the City of Los Angeles created and maintained by the Bureau of Engineering / GIS Mapping Division.

Designed, created and shared by the Los Angeles County Enterprise GIS (eGIS) team, the Los Angeles County Canvas Basemap is designed using minimal colors, labels and features. City boundaries, roads networks, land types and national hydrographic data are a few of the layers used to create this basemap. Unlike the Los Angeles County Base Basemap, the Canvas does not contain aerial imagery. This basemap covers the extent of Los Angeles County and may be used for large scale mapping. This basemap is cached up to scale 1: 564.

This layer represents current city boundaries within Los Angeles County. The Los Angeles County Department of Public Works provides the most current shapefiles representing city boundaries and city annexations on the Los Angeles County GIS Data Portal. True, legal boundaries are only determined on the ground by surveyors licensed in the State of California. Numerous records are freely available at the Land Records Information website, hosted by the Department of Public Works.Principal attributes include:CITY_NAME: represents the city's name.CITY_TYPE: may be used for definition queries; "Unincorporated" or "City".FEAT_TYPE: identifies the feature that each polygon represents:Land - This value is used for polygons representing the land masses, if you want to see only land features on your map.Pier - This value is used for polygons representing piers along the coastline. One example is the Santa Monica Pier.Breakwater - This value is used for polygons representing man-made barriers that protect the harbors.Water - This value is used for polygons representing navigable waters inside the harbors and marinas.3NM Buffer - This value is used for polygons representing the three seaward nautical miles within the cities' limits, per the Submerged Lands Act.POPULATION: Information in this field is supplied by Mark Greninger (mgreninger@cio.lacounty.gov).Reference Date: 2021

File Geodatabase - Click hereShapefile - Click hereThis dataset contains current parcel boundaries and related attributes for approximately 2.4 million parcels maintained by the Los Angeles County Assessor (updated monthly on the second of every month). Due to the size of the data, it is only available for download as a zipped file geodatabase or shapefile at this time. For additional annual assessment roll history and attribute metadata descriptions, please visit the L.A. County Open Data Portal and search for Assessor. To better understand individual data elements, or to interactively view individual parcel information, please visit the Assessor’s Portal. A public-facing parcel map cache can be accessed here (updated weekly): https://public.gis.lacounty.gov/public/rest/services/LACounty_Cache/LACounty_Parcel/MapServer/0All inquiries should be directed to the Mapping & GIS Services Section, LA County Office of the Assessor at gisinfo@assessor.lacounty.gov

This layer delineates ridgelines within selected UNINCORPORATED Community Standards Districts (CSDs) which establish restrictions for grading and ridgeline development. For more information regarding specific CSDs where these ridgelines are located, go to, click here.LAST UPDATED: 6/21/24 - additional ridgelines following the adoption of the East San Gabriel Valley Area Plan.NEED MORE FUNCTIONALITY? If you are looking for more layers or advanced tools and functionality, then try our suite of GIS Web Mapping Applications.

These data provide an accurate high-resolution shoreline compiled from imagery of PORTS OF LOS ANGELES AND LONG BEACH, CA . This vector shoreline data is based on an office interpretation of imagery that may be suitable as a geographic information system (GIS) data layer. This metadata describes information for both the line and point shapefiles. The NGS attribution scheme 'Coastal Cartographic Object Attribute Source Table (C-COAST)' was developed to conform the attribution of various sources of shoreline data into one attribution catalog. C-COAST is not a recognized standard, but was influenced by the International Hydrographic Organization's S-57 Object-Attribute standard so the data would be more accurately translated into S-57. This resource is a member of https://www.fisheries.noaa.gov/inport/item/39808

Land Use and Zoning data for the City of Los Angeles as well as Los Angeles County.

File Geodatabase - Click hereShapefile - Click hereThis dataset contains current parcel boundaries and related attributes for approximately 2.4 million parcels maintained by the Los Angeles County Assessor (updated monthly on the second of every month). Due to the size of the data, it is only available for download as a zipped file geodatabase or shapefile at this time. For additional annual assessment roll history and attribute metadata descriptions, please visit the L.A. County Open Data Portal and search for Assessor. To better understand individual data elements, or to interactively view individual parcel information, please visit the Assessor’s Portal. A public-facing parcel map cache can be accessed here (updated weekly): https://public.gis.lacounty.gov/public/rest/services/LACounty_Cache/LACounty_Parcel/MapServer/0All inquiries should be directed to the Mapping & GIS Services Section, LA County Office of the Assessor at gisinfo@assessor.lacounty.gov

All buildings over 64 square feet in City of Los Angeles captured through LARIAC4 4" and 1' imagery. LARIAC4 guide: https://lariac-lacounty.hub.arcgis.com/pages/lariac4-documents-dataCountywide Building Outlines download available from LA County at: https://data.lacounty.gov/maps/57f5fc977d6a427a978003a6229ab5e7/aboutData is from 2014.

ESRI ArcGIS Online Map based application allowing users to view historical city boundary annexation and detachment information to and from the 88 incorporated cities within Los Angeles County. Public can use widgets that are available in the app to get information for the Annexations. For information regarding Proposed City Annexation/Detachment and Special District Formation, click here.

Important Note:The metadata description below mentions the Regional Housing Needs Assessment (or RHNA). Part of meeting RHNA Eligibility is satisfying a list of criteria set by the State of California that needs to be met in order to qualify. This dataset contains both RHNA Eligible and non-RHNA Eligible sites. Non-RHNA Eligible sites are those that didn't quite meet the eligibility criteria set by the state, but will be still eligible for Rezoning per Department of Regional Planning guidelines, and thus represents a full picture of ALL sites that are eligible for Rezoning. The official Housing Element Rezoning layer that was certified by the State of California is located here, but it should be noted that this layer only contains sites that are RHNA Eligible.IntroductionThis metadata is broken up into different sections that provide both a high-level summary of the Housing Element and more detailed information about the data itself with links to other resources. The following is an excerpt from the Executive Summary from the Housing Element 2021 – 2029 document:The County of Los Angeles is required to ensure the availability of residential sites, at adequate densities and appropriate development standards, in the unincorporated Los Angeles County to accommodate its share of the regional housing need--also known as the Regional Housing Needs Allocation (RHNA). Unincorporated Los Angeles County has been assigned a RHNA of 90,052 units for the 2021-2029 Housing Element planning period, which is subdivided by level of affordability as follows:Extremely Low / Very Low (<50% AMI) - 25,648Lower (50 - 80% AMI) - 13,691Moderate (80 - 120% AMI) - 14,180Above Moderate (>120% AMI) - 36,533Total - 90,052NOTES - Pursuant to State law, the projected need of extremely low income households can be estimated at 50% of the very low income RHNA. Therefore, the County’s projected extremely low income can be estimated at 12,824 units. However, for the purpose of identifying adequate sites for RHNA, no separate accounting of sites for extremely low income households is required. AMI = Area Median IncomeDescriptionThe Sites Inventory (Appendix A) is comprised of vacant and underutilized sites within unincorporated Los Angeles County that are zoned at appropriate densities and development standards to facilitate housing development. The Sites Inventory was developed specifically for the County of Los Angeles, and has built-in features that filter sites based on specific criteria, including access to transit, protection from environmental hazards, and other criteria unique to unincorporated Los Angeles County. Other strategies used within the Sites Inventory analysis to accommodate the County’s assigned RHNA of 90,052 units include projected growth of ADUs, specific plan capacity, selected entitled projects, and capacity or planned development on County-owned sites within cities. This accounts for approximately 38 percent of the RHNA. The remaining 62 percent of the RHNA is accommodated by sites to be rezoned to accommodate higher density housing development (Appendix B).Caveats:This data is a snapshot in time, generally from the year 2021. It contains information about parcels, zoning and land use policy that may be outdated. The Department of Regional Planning will be keeping an internal tally of sites that get developed or rezoned to meet our RHNA goals, and we may, in the future, develop some public facing web applications or dashboards to show the progress. There may even be periodic updates to this GIS dataset as well, throughout this 8-year planning cycle.Update History:12/18/24 - Following the completion of the annexation to the City of Whittier on 11/12/24, 27 parcels were removed along Whittier Blvd which contained 315 Very Low Income units and 590 Above Moderate units. Following a joint County-City resolution of the RHNA transfer to the city, 247 Very Low Income units and 503 Above Moderate units were taken on by Whittier. 10/23/24 - Modifications were made to this layer during the updates to the South Bay and Westside Area Plans following outreach in these communities. In the Westside Planning area, 29 parcels were removed and no change in zoning / land use policy was proposed; 9 Mixed Use sites were added. In the South Bay, 23 sites were removed as they no longer count towards the RHNA, but still partially changing to Mixed Use.5/31/22 – Los Angeles County Board of Supervisors adopted the Housing Element on 5/17/22, and it received final certification from the State of California Department of Housing and Community Development (HCD) on 5/27/22. Data layer published on 5/31/22.Links to other resources:Department of Regional Planning Housing Page - Contains Housing Element and it's AppendicesHousing Element Update - Rezoning Program Story Map (English, and Spanish)Southern California Association of Governments (SCAG) - Regional Housing Needs AssessmentCalifornia Department of Housing and Community Development Housing Element pageField Descriptions:OBJECTID - Internal GIS IDAIN - Assessor Identification Number*SitusAddress - Site Address (Street and Number) from Assessor Data*Use Code - Existing Land Use Code (corresponds to Use Type and Use Description) from Assessor Data*Use Type - Existing Land Use Type from Assessor Data*Use Description - Existing Land Use Description from Assessor Data*Vacant / Nonvacant – Parcels that are vacant or non-vacant per the Use Code from the Assessor Data*Units Total - Total Existing Units from Assessor Data*Max Year - Maximum Year Built from Assessor Data*Supervisorial District (2021) - LA County Board of Supervisor DistrictSubmarket Area - Inclusionary Housing Submarket AreaPlanning Area - Planning Areas from the LA County Department of Regional Planning General Plan 2035Community Name - Unincorporated Community NamePlan Name - Land Use Plan Name from the LA County Department of Regional Planning (General Plan and Area / Community Plans)LUP - 1 - Land Use Policy from Dept. of Regional Planning - Primary Land Use Policy (in cases where there are more than one Land Use Policy category present)*LUP - 1 (% area) - Land Use Policy from Dept. of Regional Planning - Primary Land Use Policy (% of parcel covered in cases where there are more than one Land Use Policy category present)*LUP - 2 - Land Use Policy from Dept. of Regional Planning - Secondary Land Use Policy (in cases where there are more than one Land Use Policy category present)*LUP - 2 (% area) - Land Use Policy from Dept. of Regional Planning - Secondary Land Use Policy (% of parcel covered in cases where there are more than one Land Use Policy category present)*LUP - 3 - Land Use Policy from Dept. of Regional Planning - Tertiary Land Use Policy (in cases where there are more than one Land Use Policy category present)*LUP - 3 (% area) - Land Use Policy from Dept. of Regional Planning - Tertiary Land Use Policy (% of parcel covered in cases where there are more than one Land Use Policy category present)*Current LUP (Description) – This is a brief description of the land use category. In the case of multiple land uses, this would be the land use category that covers the majority of the parcel*Current LUP (Min Density - net or gross) - Minimum density for this category (as net or gross) per the Land Use Plan for this areaCurrent LUP (Max Density - net or gross) - Maximum density for this category (as net or gross) per the Land Use Plan for this areaProposed LUP – Final – The proposed land use category to increase density.Proposed LUP (Description) – Brief description of the proposed land use policy.Prop. LUP – Final (Min Density) – Minimum density for the proposed land use category.Prop. LUP – Final (Max Density) – Maximum density for the proposed land use category.Zoning - 1 - Zoning from Dept. of Regional Planning - Primary Zone (in cases where there are more than one zone category present)*Zoning - 1 (% area) - Zoning from Dept. of Regional Planning - Primary Zone (% of parcel covered in cases where there are more than one zone category present)*Zoning - 2 - Zoning from Dept. of Regional Planning - Secondary Zone (in cases where there are more than one zone category present)*Zoning - 2 (% area) - Zoning from Dept. of Regional Planning - Secondary Zone (% of parcel covered in cases where there are more than one zone category present)*Zoning - 3 - Zoning from Dept. of Regional Planning - Tertiary Zone (in cases where there are more than one zone category present)*Zoning - 3 (% area) - Zoning from Dept. of Regional Planning - Tertiary Zone (% of parcel covered in cases where there are more than one zone category present)*Current Zoning (Description) - This is a brief description of the zoning category. In the case of multiple zoning categories, this would be the zoning that covers the majority of the parcel*Proposed Zoning – Final – The proposed zoning category to increase density.Proposed Zoning (Description) – Brief description of the proposed zoning.Acres - Acreage of parcelMax Units Allowed - Total Proposed Land Use Policy UnitsRHNA Eligible? – Indicates whether the site is RHNA Eligible or not. Very Low Income Capacity - Total capacity for the Very Low Income level as defined in the Housing ElementLow Income Capacity - Total capacity for the Low Income level as defined in the Housing ElementModerate Income Capacity - Total capacity for the Moderate Income level as defined in the Housing ElementAbove Moderate Income Capacity - Total capacity for the Above Moderate Income level as defined in the Housing ElementRealistic Capacity - Total Realistic Capacity of parcel (totaling all income levels). Several factors went into this final calculation. See the Housing Element (Links to Other Resources above) in the following locations - "Sites Inventory - Lower Income RHNA" (p. 223), and "Rezoning - Very Low / Low Income RHNA" (p231).Income Categories - Income Categories assigned to the parcel (relates

The Department of Recreation and Parks' GIS map of park boundaries in the City of Los Angeles.

The Mayor’s Office utilizes the most recent data to inform decisions about COVID-19 response and policies. The Los Angeles COVID-19 Neighborhood Map visualizes the cases and deaths across 139 neighborhoods in the city. It includes the same data used by the office to spot changes in infection trends in the city, and identify areas where testing resources should be deployed.Data Source:Data are provided on a weekly basis by the LA County Department of Public Health and prepared by the LA Mayor's Office Innovation Team. The data included in this map are on a one-week lag. That means the data shown here are reporting statistics gathered from one week ago. This map will be updated weekly on Mondays. Click on the maps to zoom in, get more details, and see the legends.

Zoned Districts were established when zoning was initially created for the UNINCORPORTED areas of Los Angeles County. They served to divide the County into smaller distinct units for easier record keeping and organization. Zoned Districts remain in use to identify and track records from the earliest period, and for performing queries regarding permits and ordinances adopted over time. For a list of Zoned Districts or other information regarding these districts, please refer to Title 22 of the Los Angeles County Code here.LAST UPDATED: 3/19/25 for an annexation to the City of Duarte.NEED MORE FUNCTIONALITY? If you are looking for more layers or advanced tools and functionality, then try our suite of GIS Web Mapping Applications.

This map page grid was designed and implemented by the Los Angeles County Fire Department, Information Management Division, and Geographic Information Systems Section. Wholly based on the United States National Grid (USNG), it aims to be the Los Angeles County regional grid because of its ease of use and extensive coverage.

Each block measures 2,000 meters by 2,000 meters and are comprised of four 1,000 meter/1 kilometer USNG blocks. i.e. 11SLT4771, 11SLT4871, 11SLT4770 and 11SLT4870; left to right and up to down. For ease of use each 2,000 meter block is designated by a page number from 1 to 9,750, and it is inferred that the 1,000 meter divisions of each page are designated A, B, C or D; left to right and up to down. Therefore, each 1,000 meter block within this regional grid has a unique descriptor of 4 numerals and 1 letter.

The region covered by the grid includes Los Angeles County completely and 2 of the islands in the Channel Islands archipelago that fall into the Los Angeles County jurisdiction. It also covers close to 100% of Orange County, 50% of Ventura County, and the Los Angeles County adjacent portions of Kern County, San Bernardino County and Riverside County, and a portion of Marine Corps Base Camp Pendleton in Northwest San Diego County.

PAGE = Grid Number

Reference Date: 2016

Contact Information:

Los Angeles County Fire Department Geographic Information Systems Section LACoFDGIS@fire.lacounty.gov

Tax rate area boundaries and related data based on changes filed with the Board of Equalization per Government Code 54900 for the specified assessment roll year. The data included in this map is maintained by the California State Board of Equalization and may differ slightly from the data published by other agencies. BOE_TRA layer = tax rate area boundaries and the assigned TRA number for the specified assessment roll year; BOE_Changes layer = boundary changes filed with the Board of Equalization for the specified assessment roll year; Data Table (C##_YYYY) = tax rate area numbers and related districts for the specified assessment roll year

Official Public Right of Way And Easements in the City of Los Angeles created and maintained by the Bureau of Engineering / GIS Mapping Division.