DOUGLAS COUNTY SURVEY/GISGIS PARCEL MAPPING GUIDELINES FOR PARCEL DISCREPANCIESIt is the intent of the Douglas County GIS Parcel Mapping to accurately identify the areas of land parcels to be valued and taxed 1. Discrepancies in areas• The Auditor/Assessor (tax) acreage areas started with the original US General Land Office (GLO) township plat maps created from the Public Land Survey (PLS) that was done between 1858 and 1871. The recovery of the PLS corners and the accurate location of these corners with GPS obtained coordinates has allowed for accurate section subdivisions, which results in accurate areas for parcels based on legal descriptions, which may be significantly different than the original areas. (See Example 2)• Any parcel bordering a meandered lake and/or a water boundary will likely have a disparity of area between the Auditor/Assessor acreages and the GIS acreages because of the inaccuracy of the original GLO meander lines from which the original areas were determined. Water lines are not able to be drafted to the same accuracy as the normal parcel lines. The water lines are usually just sketched on a survey and their dimensions are not generally given on a land record. The water boundaries of our GIS parcels are located from aerial photography. This is a subjective determination based on the interpretation by the Survey/GIS technician of what is water. Some lakes fluctuate significantly and the areas of all parcels bordering water are subject to constant change. In these cases the ordinary high water line (OHW) is attempted to be identified. Use of 2-foot contours will be made, if available. (See Example 1)• Some land records do not accurately report the area described in the land description and the description area is ignored. (See Example 3)• The parcel mapping has made every attempt to map the parcels based on available survey information as surveyed and located on the ground. This may conflict with some record legal descriptions.Solutions• If an actual survey by a licensed Land Surveyor is available, it will be utilized for the tax acreage.• If the Auditor/Assessor finds a discrepancy between the tax and GIS areas, they will request a review by the County Survey/GIS department.• As a starting guideline, the County Survey/GIS department will identify all parcels that differ in tax area versus GIS parcel area of 10 % or more and a difference of at least 5 acres. (This could be expanded later after the initial review.)• Each of these identified parcels will be reviewed individually by the County Survey/GIS department to determine the reason for the discrepancy and a recommendation will be made by the County Survey/GIS department to the Auditor/Assessor if the change should be made or not.• If a change is to be made to the tax area, a letter will be sent to the taxpayer informing them that their area will be changed during the next tax cycle, which could affect their property valuation. This letter will originate from the Auditor/Assessor with explanation from the County Survey/GIS department. 2. Gaps and Overlaps• Land descriptions for adjoining parcels sometimes overlap or leave a gap between them.o In these instances the Survey/GIS technician has to make a decision where to place this boundary. A number of circumstances are reviewed to facilitate this decision as these dilemmas are usually decided on a case by case basis. All effort will be made to not leave a gap, but sometimes this is not possible and the gap will be shown with “unknown” ownership. (Note: The County does not have the authority to change boundaries!)o Some of the circumstances reviewed are: Which parcel had the initial legal description? Does the physical occupation of the parcel line as shown on the air photo more closely fit one of the described parcels? Interpretation of the intent of the legal description. Is the legal description surveyable?Note: These overlaps will be shown on the GIS map with a dashed “survey line” and accompanying text for the line not used for the parcel boundary. 3. Parcel lines that do not match location of buildings Structures on parcels do not always lie within the boundaries of the parcel. This may be a circumstance of building without the benefit of a survey or of misinterpreting these boundaries. The parcel lines should be shown accurately as surveyed and/or described regardless of the location of structures on the ground. NOTE: The GIS mapping is not a survey, but is an interpretation of parcel boundaries predicated upon resources available to the County Survey/GIS department.Gary Stevenson Page 1 7/21/2017Example 1Example 2A Example 2B Example 3
To access parcel information:Enter an address or zoom in by using the +/- tools or your mouse scroll wheel. Parcels will draw when zoomed in.Click on a parcel to display a popup with information about that parcel.Click the "Basemap" button to display background aerial imagery.From the "Layers" button you can turn map features on and off.Complete Help (PDF)Parcel Legend:Full Map LegendAbout this ViewerThis viewer displays land property boundaries from assessor parcel maps across Massachusetts. Each parcel is linked to selected descriptive information from assessor databases. Data for all 351 cities and towns are the standardized "Level 3" tax parcels served by MassGIS. More details ...Read about and download parcel dataUpdatesV 1.1: Added 'Layers' tab. (2018)V 1.2: Reformatted popup to use HTML table for columns and made address larger. (Jan 2019)V 1.3: Added 'Download Parcel Data by City/Town' option to list of layers. This box is checked off by default but when activated a user can identify anywhere and download data for that entire city/town, except Boston. (March 14, 2019)V 1.4: Data for Boston is included in the "Level 3" standardized parcels layer. (August 10, 2020)V 1.4 MassGIS, EOTSS 2021
This viewer was created for the Arkansas GIS Office to aid staff as well as County personnel in quickly locating information related to tax parcels.
Property map viewer for the State of Tennessee that covers 85 of the 95 counties in Tennessee.This application allows for searching and displaying property ownership and location information for 87 counties in Tennessee. It is designed to work in concert with the Real Estate Assessment Data site operated by the Comptroller of the Treasury. The following counties are not available in this application but can be found on their own internet sites: Bradley, Davidson (Metro Nashville), Hamilton (Chattanooga), Knox (Knoxville), Montgomery (Clarksville), Rutherford(Murfreesboro), Shelby (Memphis), Sumner, Unicoi, and Williamson.
This Image Service of Maryland Property Data allows for the manipulation of the display properties of the Statewide Tax Maps dataset. This is a MD iMAP hosted service. Find more information at https://imap.maryland.gov.Image Service Link: https://mdgeodata.md.gov/imap/rest/services/PlanningCadastre/MD_PropertyData/ImageServer
Vector polygon map data of property parcels from New York State containing 2,789,211 features.
Property parcel GIS map data consists of detailed information about individual land parcels, including their boundaries, ownership details, and geographic coordinates.
Property parcel data can be used to analyze and visualize land-related information for purposes such as real estate assessment, urban planning, or environmental management.
Available for viewing and sharing as a map in a Koordinates map viewer. This data is also available for export to DWG for CAD, PDF, KML, CSV, and GIS data formats, including Shapefile, MapInfo, and Geodatabase.
Additional metadata, including field descriptions, can be found at the NYS GIS Clearinghouse: http://gis.ny.gov/gisdata/inventories/details.cfm?DSID=1300.
© Contributing counties, NYS Office of Information Technology Services GIS Program Office (GPO) and NYS Department of Taxation and Finance’s Office of Real Property Tax Services (ORPTS).
This is a MD iMAP hosted service layer. Find more information at https://imap.maryland.gov.Feature Service Layer Link:https://mdgeodata.md.gov/imap/rest/services/PlanningCadastre/MD_PropertyData/MapServer/1
This layer contains parcels data for Oswego County, NY as taken from the current digitized version of the county tax maps. Originally drawn by Stewart Mapping Services, Inc of San Antonio Texas in 1975, but with digital topology corrected by Oswego County's Department of Real Property Tax Services from 1996-present. Contains taxable parcels attributed with assessment data taken from local assessment rolls.Geography is based upon the taxable status date of March 1st, 2025. Assessment attributes are from the latest final assessment roll (2024) except ownership which is updated bi-monthly on Fridays to reflect the most current owners of record. Click here to retrieve a data dictionary for decoding fields.Note: The original tax maps that these files were digitized from only had an accuracy between 10-20 feet on ground. While every effort is made to maintain this geographic data in an accurate format, the lines drawn from this data are fundamentally informational in nature and are not equivalent to survey grade. Geoprocessing has been applied to this specific web layer to allow faster drawing of lines which can further degrade the accuracy of their geometry. Finally, these parcels are used to create county tax maps which have the sole use case of giving assistance for local municipal assessors in the fulfillment of their duties, there is no warranty (expressed or implied) for any other use.
Publication Date: April 2025 2024 Parcel Data. Updated annually, or as needed. The data can be downloaded here: https://gis.ny.gov/parcels#data-download. This feature service has two layers: 1) NYS Tax Parcels Public, and 2) NYS Tax Parcels Public Footprint which contains polygons representing counties for which tax parcel polygons are available in the NYS Tax Parcels Public layer. County footprint polygons display when zoomed out beyond 1:37,050-scale. Tax parcel polygons display when zoomed in below 1:37,051-scale. The NYS Tax Parcels Public layer contains 2024 parcel data only for NY State counties which gave NYS ITS Geospatial Services permission to share this data with the public. Work to obtain parcel data from additional counties, as well as permission to share the data, is ongoing. To date, 36 counties have provided Geospatial Services permission to share their parcel data with the public. Parcel data for counties which do not allow Geospatial Services to redistribute their data must be obtained directly from those counties. Geospatial Services' goal is to eventually include parcel data for all counties in New York State. Parcel geometry was incorporated as received from County Real Property Departments. No attempt was made to edge-match parcels along adjacent counties. County attribute values were populated using 2024 Assessment Roll tabular data the NYS ITS Geospatial Services obtained from the NYS Department of Tax and Finance’s Office of Real Property Tax Services (ORPTS). Tabular assessment data was joined to the county provided parcel geometry using the SWIS & SBL or SWIS & PRINT KEY unique identifier for each parcel. Detailed information about assessment attributes can be found in the ORPTS Assessor’s Manuals available here: https://www.tax.ny.gov/research/property/assess/manuals/assersmanual.htm. New York City data comes from NYC MapPluto which can be found here: https://www1.nyc.gov/site/planning/data-maps/open-data/dwn-pluto-mappluto.page. Thanks to the following counties that specifically authorized Geospatial Services to share their GIS tax parcel data with the public: Albany, Cayuga, Chautauqua, Cortland, Erie, Genesee, Greene, Hamilton, Lewis, Livingston, Montgomery, NYC- Bronx, NYC- Kings (Brooklyn), NYC- New York (Manhattan), NYC- Queens, NYC- Richmond (Staten Island), Oneida, Onondaga, Ontario, Orange, Oswego, Otsego, Putnam, Rensselaer, Rockland, Schuyler, St Lawrence, Steuben, Suffolk, Sullivan, Tioga, Tompkins, Ulster, Warren, Wayne, and Westchester. Geometry accuracy varies by contributing county. This map service is available to the public. The State of New York, acting through the New York State Office of Information Technology Services, makes no representations or warranties, express or implied, with respect to the use of or reliance on the Data provided. The User accepts the Data provided “as is” with no guarantees that it is error free, complete, accurate, current or fit for any particular purpose and assumes all risks associated with its use. The State disclaims any responsibility or legal liability to Users for damages of any kind, relating to the providing of the Data or the use of it. Users should be aware that temporal changes may have occurred since this Data was created.
U.S. Government Workshttps://www.usa.gov/government-works
License information was derived automatically
This is a MD iMAP hosted service layer. Find more information at http://imap.maryland.gov. This layer contains the boundaries and IDs of the Maryland tax maps produced by Maryland Department of Planning. Tax maps - also known as assessment maps - property maps or parcel maps - are a graphic representation of real property showing and defining individual property boundaries in relationship to contiguous real property. Last Updated: Feature Service Layer Link: https://mdgeodata.md.gov/imap/rest/services/PlanningCadastre/MD_PropertyData/MapServer ADDITIONAL LICENSE TERMS: The Spatial Data and the information therein (collectively "the Data") is provided "as is" without warranty of any kind either expressed implied or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct indirect incidental consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.
A web map used to access tax parcel, boundary, ownership, acreage, survey, zoning and tax information. Errors and Omissions Do Exist.The information provided is for reference only and subject to independent verification. User assumes all responsibility for its use.https://www.fayette-co-oh.com/Fayette County ProfileFayette County is a county located in the U.S. state of Ohio. Its county seat is Washington Court House. Fayette County was formed on March 1, 1810 from portions of Highland County and Ross County. It was named after Marie-Joseph Motier, Marquis de La Fayette, a French general and politician who took the side of the Colonials during the American Revolutionary War and who played an important role in the French Revolution.Fayette County is a part of the Virginia Military survey, which was reserved in 1783, to be allotted to Virginia soldiers. This district includes the entire counties of Adams, Brown, Clermont, Clinton, Highland, Fayette, Madison and Union; and a portion of the counties of Scioto, Pike, Ross, Pickaway, Franklin, Delaware, Marion, Hardin, Logan, Champaign, Clarke, Greene, Warren and Hamilton.Fayette County was formed January 19, 1810 (took effect March 1st) from Ross and Highland counties. Beginning at the southwest corner of Pickaway, running north “with the line of said county to the corner of Madison; thence west with the line of said Madison county to the line of Greene county; thence south with the line of Greene county to the southeast corner thereof; thence east five miles; thence south to the line of Highland county; thence east with said line to Paint Creek; thence in a straight line to the beginning.” All the lower portion was taken from Highland and the upper from Ross.The first portion of land entered within the territory of what is now Fayette county, was a part of original surveys Nos. 243 and 772, lying partly in Clinton county. The first survey lying wholly within Fayette county was No. 463, in what is now Madison township, surveyed for Thomas Overton by John O’Bannon June 30, 1776.The original townships were Jefferson, Greene, Wayne, Madison, Paint and Union. Concord township was formed in April 1818, from Greene. Marion township was formed in June, 1840 from Madison. Perry township was formed June 4, 1845, from Wayne and Greene. Jasper township was formed from Jefferson and Concord December 2, 1845.Washington C.H. was laid out originally on a part of entry 757, which contained 1200 acres and belonged to Benjamin Temple, of Logan county, Kentucky, who donated 150 acres to Fayette county, on condition that it be used as the site of the county seat. The deed of conveyance was made December 1, 1810, by Thomas S. Hind, attorney for Temple, to Robert Stewart, who was appointed by the legislature as director for the town of Washington. The town was laid off some time between December 1, 1810, and February 26, 1811, the latter being the date of the record of the town plat.Bloomingburg (originally called New Lexington) was laid out in 1815, by Solomon Bowers, and originally contained 34 and ¾ acres. On March 4, 1816, Bowers laid out and added twenty more lots. The name of the town was later changed to Bloomingburg by act of the legislature. The town was incorporated by act of the legislature, February 5, 1847.Jeffersonville was laid out March 1, 1831, by Walter B. Write and Chipman Robinson, on 100 acres of land belonging to them, they started selling the lots at $5 each. The town incorporated March 17, 1838. The first house was erected by Robert Wyley.The first railroad, now the C. & M. V., was completed in 1852; the second, now the Detroit Southern, in 1875; the third, now the C.H. & D. in 1879; and the fourth, now the B. & O. S. W., in 1884.The first permanent settler (probably) was a Mr. Wolf who settled in what is now Wayne township, in about the year 1796. - Circa 1886 - Map of Fayette County, Ohio. Issued by the Fayette County Record.
MassGIS' standardized ("Level 3") property tax parcel mapping data set was developed through a competitive procurement funded by MassGIS. Each community in the Commonwealth was bid on by one or more vendors and the unit of work awarded was a city or town. The specification for this work was Level 3 of the MassGIS Digital Parcel Standard. Standardization of assessor parcel mapping is complete for all 351 Massachusetts' cities and towns. MassGIS is now incorporating updates from municipalities into the database. This hosted feature layer is exported from MassGIS' internal database of the feature class GISDATA.L3_TAXPAR_POLY_ASSESS, which links L3_TAXPAR_POLY and L3_ASSESS. The export includes the expression: (POLY_TYPE IN ('FEE', 'TAX')) OR (POLY_TYPE IN ('ROW', 'PRIV_ROW', 'RAIL_ROW', 'WATER') AND PROP_ID IS NOT NULL) It contains several fields from GISDATA.L3_ASSESS and stacked polygons where multiple assessor records link to a parcel. It contains features that do not have an associated record in GISDATA.L3_ASSESS, except for rights of way and water bodies. ROWs and water bodies with a non-null PROP_ID are included. The data in this feature layer is used for the popups in the Massachusetts Interactive Property Map. See full data descriptionA hosted tile layer will draw very quickly at map scale of 1:18,056 (level 15) to 1:564 (level 20).
These parcel boundaries represent legal descriptions of property ownership, as recorded in various public documents in the local jurisdiction. The boundaries are intended for cartographic use and spatial analysis only, and not for use as legal descriptions or property surveys. Tax parcel boundaries have not been edge-matched across municipal boundaries.
To access parcel information:Enter an address or zoom in by using the +/- tools or your mouse scroll wheel. Parcels will draw when zoomed in.Click on a parcel to display a popup with information about that parcel.Click the "Basemap" button to display background aerial imagery.From the "Layers" button you can turn map features on and off. Check on 'Download Parcel Data by City/Town' and click in the map for links to download all parcel data for that municipality.Complete Help (PDF)Parcel Legend:Full Map LegendAbout this ViewerThe map displays land property boundaries from assessor parcel maps across Massachusetts. Parcel information is from local assessor databases. More...Read about and download parcel dataAlso available: an accessible, non-map-based Property Information FinderDISCLAIMER: Assessor’s parcel mapping is a representation of property boundaries, not an authoritative source. The authoritative record of property boundaries is recorded at the registries of deeds. A legally authoritative map of property boundaries can only be produced by a professional land surveyor.V 1.4 MassGIS, EOTSS 2021
Vector polygon map data of property parcels from Mount Vernon containing 11,202 features.
Property parcel GIS map data consists of detailed information about individual land parcels, including their boundaries, ownership details, and geographic coordinates.
Property parcel data can be used to analyze and visualize land-related information for purposes such as real estate assessment, urban planning, or environmental management.
Available for viewing and sharing as a map in a Koordinates map viewer. This data is also available for export to DWG for CAD, PDF, KML, CSV, and GIS data formats, including Shapefile, MapInfo, and Geodatabase.
Note from source:
The data made available in this service is for general information and planning purposes only, and should not be relied upon as a sole informational source. The County of Westchester hereby disclaims any liability for any and all damage, loss, or liability which may result, directly or indirectly, from the use of this GIS mapping system by any person or entity.
Tax parcel boundaries represent approximate property line location and should NOT be interpreted as or used in lieu of a survey, property boundary description, or a definitive municipal tax map. Property descriptions must be obtained from surveys or deeds. As this data was compiled from many different sources, discrepancies will exist along some municipal boundaries. Authoritative and approved tax maps for this municipality ONLY reside with the local assessor. For more information please contact the local assessor's office.
To view and download tax plat maps, click on the DATA tab above. To find a map, select a column heading to sort the table by zone or section number. Or refine your search by the clicking the filter icon at the top of each column. To view or download the tax plat map, click on the URL under ViewMap next to the ZSP map number. Alternatively, use the online Parcel and Zoning Map to search for tax plat maps by address, tax map key (TMK), or using a map interface.
Do not download this parcel map service as a shapefile - you will get an error. To download a zipped file geodatabase, go to this Hub item: https://egis-lacounty.hub.arcgis.com/datasets/parcelsThis map service provides information about properties and parcel boundaries in the County of Los Angeles. The Office of the Assessor (click here for their website) maintains assessment records of real and personal property in the County of Los Angeles, as well as a GIS Tax Parcel Base Map. The Assessor has recently changed its policies and will be releasing a number of datasets publicly over time. They will be available here, as well as on the County’s Open Data Portal (click here to learn more). To access the Property Assessment Information System, where you can search for properties and see maps and imagery, go to the PAIS website.All inquiries should be directed to the Mapping & GIS Services Section, LA County Office of the Assessor at gisinfo@assessor.lacounty.gov
MassGIS' standardized assessors’ parcel mapping data set contains property (land lot) boundaries and database information from each community's assessor.The data were developed through a competitive procurement funded by MassGIS. Each community in the Commonwealth was bid on by one or more vendors and the unit of work awarded was a city or town. The specification for this work was Level 3 of the MassGIS Digital Parcel Standard.This feature service contains three feature classes and one table.Map service also available.See the datalayer page for full details.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
Updated Weekly*This data set represents tax lots for Jackson County and includes account info (ownership, assessed and real market values, and building information). Data is updated on a weekly basis from assessor tax parcel information. Where there are several different owners on an individual parcel, multiple parcels polygons will exist since parcel to ownership is not a one to one relationship. Some other fields like year built are populated with the first record if multiple exists. For question about parcel updates or issues please contact the Assessor's Office at (541) 774-6059.
A web map used to visualize available digital parcel data for Organized Towns and Unorganized Territories throughout the state of Maine. Individual towns submit parcel data on a voluntary basis; the data are compiled by the Maine Office of GIS for dissemination by the Maine GeoLibrary, and where available, the web map also includes assessor data contained in the Parcels_ADB related table.This web map is intended for use within the Maine Geoparcel Viewer Application; it is not intended for use as a standalone web map.Within Maine, real property data is maintained by the government organization responsible for assessing and collecting property tax for a given location. Organized towns and townships maintain authoritative data for their communities and may voluntarily submit these data to the Maine GeoLibrary Parcel Project. Maine Parcels Organized Towns and Maine Parcels Organized Towns ADB are the product of these voluntary submissions. Communities provide updates to the Maine GeoLibrary on a non-regular basis, sometimes many years apart, which affects the currency of Maine GeoLibrary parcels data. Another resource for real property transaction data is the County Registry of Deeds, although organized town data should very closely match registry information, except in the case of in-process property conveyance transactions.
DOUGLAS COUNTY SURVEY/GISGIS PARCEL MAPPING GUIDELINES FOR PARCEL DISCREPANCIESIt is the intent of the Douglas County GIS Parcel Mapping to accurately identify the areas of land parcels to be valued and taxed 1. Discrepancies in areas• The Auditor/Assessor (tax) acreage areas started with the original US General Land Office (GLO) township plat maps created from the Public Land Survey (PLS) that was done between 1858 and 1871. The recovery of the PLS corners and the accurate location of these corners with GPS obtained coordinates has allowed for accurate section subdivisions, which results in accurate areas for parcels based on legal descriptions, which may be significantly different than the original areas. (See Example 2)• Any parcel bordering a meandered lake and/or a water boundary will likely have a disparity of area between the Auditor/Assessor acreages and the GIS acreages because of the inaccuracy of the original GLO meander lines from which the original areas were determined. Water lines are not able to be drafted to the same accuracy as the normal parcel lines. The water lines are usually just sketched on a survey and their dimensions are not generally given on a land record. The water boundaries of our GIS parcels are located from aerial photography. This is a subjective determination based on the interpretation by the Survey/GIS technician of what is water. Some lakes fluctuate significantly and the areas of all parcels bordering water are subject to constant change. In these cases the ordinary high water line (OHW) is attempted to be identified. Use of 2-foot contours will be made, if available. (See Example 1)• Some land records do not accurately report the area described in the land description and the description area is ignored. (See Example 3)• The parcel mapping has made every attempt to map the parcels based on available survey information as surveyed and located on the ground. This may conflict with some record legal descriptions.Solutions• If an actual survey by a licensed Land Surveyor is available, it will be utilized for the tax acreage.• If the Auditor/Assessor finds a discrepancy between the tax and GIS areas, they will request a review by the County Survey/GIS department.• As a starting guideline, the County Survey/GIS department will identify all parcels that differ in tax area versus GIS parcel area of 10 % or more and a difference of at least 5 acres. (This could be expanded later after the initial review.)• Each of these identified parcels will be reviewed individually by the County Survey/GIS department to determine the reason for the discrepancy and a recommendation will be made by the County Survey/GIS department to the Auditor/Assessor if the change should be made or not.• If a change is to be made to the tax area, a letter will be sent to the taxpayer informing them that their area will be changed during the next tax cycle, which could affect their property valuation. This letter will originate from the Auditor/Assessor with explanation from the County Survey/GIS department. 2. Gaps and Overlaps• Land descriptions for adjoining parcels sometimes overlap or leave a gap between them.o In these instances the Survey/GIS technician has to make a decision where to place this boundary. A number of circumstances are reviewed to facilitate this decision as these dilemmas are usually decided on a case by case basis. All effort will be made to not leave a gap, but sometimes this is not possible and the gap will be shown with “unknown” ownership. (Note: The County does not have the authority to change boundaries!)o Some of the circumstances reviewed are: Which parcel had the initial legal description? Does the physical occupation of the parcel line as shown on the air photo more closely fit one of the described parcels? Interpretation of the intent of the legal description. Is the legal description surveyable?Note: These overlaps will be shown on the GIS map with a dashed “survey line” and accompanying text for the line not used for the parcel boundary. 3. Parcel lines that do not match location of buildings Structures on parcels do not always lie within the boundaries of the parcel. This may be a circumstance of building without the benefit of a survey or of misinterpreting these boundaries. The parcel lines should be shown accurately as surveyed and/or described regardless of the location of structures on the ground. NOTE: The GIS mapping is not a survey, but is an interpretation of parcel boundaries predicated upon resources available to the County Survey/GIS department.Gary Stevenson Page 1 7/21/2017Example 1Example 2A Example 2B Example 3