DOUGLAS COUNTY SURVEY/GISGIS PARCEL MAPPING GUIDELINES FOR PARCEL DISCREPANCIESIt is the intent of the Douglas County GIS Parcel Mapping to accurately identify the areas of land parcels to be valued and taxed 1. Discrepancies in areas• The Auditor/Assessor (tax) acreage areas started with the original US General Land Office (GLO) township plat maps created from the Public Land Survey (PLS) that was done between 1858 and 1871. The recovery of the PLS corners and the accurate location of these corners with GPS obtained coordinates has allowed for accurate section subdivisions, which results in accurate areas for parcels based on legal descriptions, which may be significantly different than the original areas. (See Example 2)• Any parcel bordering a meandered lake and/or a water boundary will likely have a disparity of area between the Auditor/Assessor acreages and the GIS acreages because of the inaccuracy of the original GLO meander lines from which the original areas were determined. Water lines are not able to be drafted to the same accuracy as the normal parcel lines. The water lines are usually just sketched on a survey and their dimensions are not generally given on a land record. The water boundaries of our GIS parcels are located from aerial photography. This is a subjective determination based on the interpretation by the Survey/GIS technician of what is water. Some lakes fluctuate significantly and the areas of all parcels bordering water are subject to constant change. In these cases the ordinary high water line (OHW) is attempted to be identified. Use of 2-foot contours will be made, if available. (See Example 1)• Some land records do not accurately report the area described in the land description and the description area is ignored. (See Example 3)• The parcel mapping has made every attempt to map the parcels based on available survey information as surveyed and located on the ground. This may conflict with some record legal descriptions.Solutions• If an actual survey by a licensed Land Surveyor is available, it will be utilized for the tax acreage.• If the Auditor/Assessor finds a discrepancy between the tax and GIS areas, they will request a review by the County Survey/GIS department.• As a starting guideline, the County Survey/GIS department will identify all parcels that differ in tax area versus GIS parcel area of 10 % or more and a difference of at least 5 acres. (This could be expanded later after the initial review.)• Each of these identified parcels will be reviewed individually by the County Survey/GIS department to determine the reason for the discrepancy and a recommendation will be made by the County Survey/GIS department to the Auditor/Assessor if the change should be made or not.• If a change is to be made to the tax area, a letter will be sent to the taxpayer informing them that their area will be changed during the next tax cycle, which could affect their property valuation. This letter will originate from the Auditor/Assessor with explanation from the County Survey/GIS department. 2. Gaps and Overlaps• Land descriptions for adjoining parcels sometimes overlap or leave a gap between them.o In these instances the Survey/GIS technician has to make a decision where to place this boundary. A number of circumstances are reviewed to facilitate this decision as these dilemmas are usually decided on a case by case basis. All effort will be made to not leave a gap, but sometimes this is not possible and the gap will be shown with “unknown” ownership. (Note: The County does not have the authority to change boundaries!)o Some of the circumstances reviewed are: Which parcel had the initial legal description? Does the physical occupation of the parcel line as shown on the air photo more closely fit one of the described parcels? Interpretation of the intent of the legal description. Is the legal description surveyable?Note: These overlaps will be shown on the GIS map with a dashed “survey line” and accompanying text for the line not used for the parcel boundary. 3. Parcel lines that do not match location of buildings Structures on parcels do not always lie within the boundaries of the parcel. This may be a circumstance of building without the benefit of a survey or of misinterpreting these boundaries. The parcel lines should be shown accurately as surveyed and/or described regardless of the location of structures on the ground. NOTE: The GIS mapping is not a survey, but is an interpretation of parcel boundaries predicated upon resources available to the County Survey/GIS department.Gary Stevenson Page 1 7/21/2017Example 1Example 2A Example 2B Example 3

All of the ERS mapping applications, such as the Food Environment Atlas and the Food Access Research Atlas, use map services developed and hosted by ERS as the source for their map content. These map services are open and freely available for use outside of the ERS map applications. Developers can include ERS maps in applications through the use of the map service REST API, and desktop GIS users can use the maps by connecting to the map server directly.

This Image Service of Maryland Property Data allows for the manipulation of the display properties of the Statewide Tax Maps dataset. This is a MD iMAP hosted service. Find more information at https://imap.maryland.gov.Image Service Link: https://mdgeodata.md.gov/imap/rest/services/PlanningCadastre/MD_PropertyData/ImageServer

The Digital Geomorphic-GIS Map of Gulf Islands National Seashore (5-meter accuracy and 1-foot resolution 2006-2007 mapping), Mississippi and Florida is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (guis_geomorphology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (guis_geomorphology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (guis_geomorphology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) A GIS readme file (guis_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (guis_geomorphology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (guis_geomorphology_metadata_faq.pdf). Please read the guis_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: https://www.google.com/earth/versions/. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (guis_geomorphology_metadata.txt or guis_geomorphology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:26,000 and United States National Map Accuracy Standards features are within (horizontally) 13.2 meters or 43.3 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

The Digital Geologic-GIS Map of the Rhoda Quadrangle, Kentucky is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (rhod_geology.gdb), and a 2.) Open Geospatial Consortium (OGC) geopackage. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (rhod_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (rhod_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) a readme file (maca_abli_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (maca_abli_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (rhod_geology_metadata_faq.pdf). Please read the maca_abli_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. QGIS software is available for free at: https://www.qgis.org/en/site/. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (rhod_geology_metadata.txt or rhod_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:24,000 and United States National Map Accuracy Standards features are within (horizontally) 12.2 meters or 40 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

This is a MD iMAP hosted service layer. Find more information at https://imap.maryland.gov.Feature Service Layer Link:https://mdgeodata.md.gov/imap/rest/services/PlanningCadastre/MD_PropertyData/MapServer/1

The Digital Geologic-GIS Map of Sagamore Hill National Historic Site and Vicinity, New York is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (sahi_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (sahi_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (sahi_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) A GIS readme file (sahi_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (sahi_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (sahi_geology_metadata_faq.pdf). Please read the sahi_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: https://www.google.com/earth/versions/. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (sahi_geology_metadata.txt or sahi_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:62,500 and United States National Map Accuracy Standards features are within (horizontally) 31.8 meters or 104.2 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

MassGIS' standardized assessors’ parcel mapping data set contains property (land lot) boundaries and database information from each community's assessor.The data were developed through a competitive procurement funded by MassGIS. Each community in the Commonwealth was bid on by one or more vendors and the unit of work awarded was a city or town. The specification for this work was Level 3 of the MassGIS Digital Parcel Standard.This map service contains three feature classes and one table.Feature service also available.See the datalayer page for full details.

This is a MD iMAP hosted service layer. Find more information at http://imap.maryland.gov. This layer contains the boundaries and IDs of the Maryland tax maps produced by Maryland Department of Planning. Tax maps - also known as assessment maps - property maps or parcel maps - are a graphic representation of real property showing and defining individual property boundaries in relationship to contiguous real property. Last Updated: Feature Service Layer Link: https://mdgeodata.md.gov/imap/rest/services/PlanningCadastre/MD_PropertyData/MapServer ADDITIONAL LICENSE TERMS: The Spatial Data and the information therein (collectively "the Data") is provided "as is" without warranty of any kind either expressed implied or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct indirect incidental consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.

To access parcel information:Enter an address or zoom in by using the +/- tools or your mouse scroll wheel. Parcels will draw when zoomed in.Click on a parcel to display a popup with information about that parcel.Click the "Basemap" button to display background aerial imagery.From the "Layers" button you can turn map features on and off.Complete Help (PDF)Parcel Legend:Full Map LegendAbout this ViewerThis viewer displays land property boundaries from assessor parcel maps across Massachusetts. Each parcel is linked to selected descriptive information from assessor databases. Data for all 351 cities and towns are the standardized "Level 3" tax parcels served by MassGIS. More details ...Read about and download parcel dataUpdatesV 1.1: Added 'Layers' tab. (2018)V 1.2: Reformatted popup to use HTML table for columns and made address larger. (Jan 2019)V 1.3: Added 'Download Parcel Data by City/Town' option to list of layers. This box is checked off by default but when activated a user can identify anywhere and download data for that entire city/town, except Boston. (March 14, 2019)V 1.4: Data for Boston is included in the "Level 3" standardized parcels layer. (August 10, 2020)V 1.4 MassGIS, EOTSS 2021

Publication Date: April 2025 2024 Parcel Data. Updated annually, or as needed. The data can be downloaded here: https://gis.ny.gov/parcels#data-download. This feature service has two layers: 1) NYS Tax Parcels Public, and 2) NYS Tax Parcels Public Footprint which contains polygons representing counties for which tax parcel polygons are available in the NYS Tax Parcels Public layer. County footprint polygons display when zoomed out beyond 1:37,050-scale. Tax parcel polygons display when zoomed in below 1:37,051-scale. The NYS Tax Parcels Public layer contains 2024 parcel data only for NY State counties which gave NYS ITS Geospatial Services permission to share this data with the public. Work to obtain parcel data from additional counties, as well as permission to share the data, is ongoing. To date, 36 counties have provided Geospatial Services permission to share their parcel data with the public. Parcel data for counties which do not allow Geospatial Services to redistribute their data must be obtained directly from those counties. Geospatial Services' goal is to eventually include parcel data for all counties in New York State. Parcel geometry was incorporated as received from County Real Property Departments. No attempt was made to edge-match parcels along adjacent counties. County attribute values were populated using 2024 Assessment Roll tabular data the NYS ITS Geospatial Services obtained from the NYS Department of Tax and Finance’s Office of Real Property Tax Services (ORPTS). Tabular assessment data was joined to the county provided parcel geometry using the SWIS & SBL or SWIS & PRINT KEY unique identifier for each parcel. Detailed information about assessment attributes can be found in the ORPTS Assessor’s Manuals available here: https://www.tax.ny.gov/research/property/assess/manuals/assersmanual.htm. New York City data comes from NYC MapPluto which can be found here: https://www1.nyc.gov/site/planning/data-maps/open-data/dwn-pluto-mappluto.page. Thanks to the following counties that specifically authorized Geospatial Services to share their GIS tax parcel data with the public: Albany, Cayuga, Chautauqua, Cortland, Erie, Genesee, Greene, Hamilton, Lewis, Livingston, Montgomery, NYC- Bronx, NYC- Kings (Brooklyn), NYC- New York (Manhattan), NYC- Queens, NYC- Richmond (Staten Island), Oneida, Onondaga, Ontario, Orange, Oswego, Otsego, Putnam, Rensselaer, Rockland, Schuyler, St Lawrence, Steuben, Suffolk, Sullivan, Tioga, Tompkins, Ulster, Warren, Wayne, and Westchester. Geometry accuracy varies by contributing county. This map service is available to the public. The State of New York, acting through the New York State Office of Information Technology Services, makes no representations or warranties, express or implied, with respect to the use of or reliance on the Data provided. The User accepts the Data provided “as is” with no guarantees that it is error free, complete, accurate, current or fit for any particular purpose and assumes all risks associated with its use. The State disclaims any responsibility or legal liability to Users for damages of any kind, relating to the providing of the Data or the use of it. Users should be aware that temporal changes may have occurred since this Data was created.

This layer contains parcels data for Oswego County, NY as taken from the current digitized version of the county tax maps. Originally drawn by Stewart Mapping Services, Inc of San Antonio Texas in 1975, but with digital topology corrected by Oswego County's Department of Real Property Tax Services from 1996-present. Contains taxable parcels attributed with assessment data taken from local assessment rolls.Geography is based upon the taxable status date of March 1st, 2025. Assessment attributes are from the latest final assessment roll (2024) except ownership which is updated bi-monthly on Fridays to reflect the most current owners of record. Click here to retrieve a data dictionary for decoding fields.Note: The original tax maps that these files were digitized from only had an accuracy between 10-20 feet on ground. While every effort is made to maintain this geographic data in an accurate format, the lines drawn from this data are fundamentally informational in nature and are not equivalent to survey grade. Geoprocessing has been applied to this specific web layer to allow faster drawing of lines which can further degrade the accuracy of their geometry. Finally, these parcels are used to create county tax maps which have the sole use case of giving assistance for local municipal assessors in the fulfillment of their duties, there is no warranty (expressed or implied) for any other use.

Vector polygon map data of property parcels from New York State containing 2,789,211 features.

Property parcel GIS map data consists of detailed information about individual land parcels, including their boundaries, ownership details, and geographic coordinates.

Property parcel data can be used to analyze and visualize land-related information for purposes such as real estate assessment, urban planning, or environmental management.

Available for viewing and sharing as a map in a Koordinates map viewer. This data is also available for export to DWG for CAD, PDF, KML, CSV, and GIS data formats, including Shapefile, MapInfo, and Geodatabase.

Additional metadata, including field descriptions, can be found at the NYS GIS Clearinghouse: http://gis.ny.gov/gisdata/inventories/details.cfm?DSID=1300.

© Contributing counties, NYS Office of Information Technology Services GIS Program Office (GPO) and NYS Department of Taxation and Finance’s Office of Real Property Tax Services (ORPTS).

These parcel boundaries represent legal descriptions of property ownership, as recorded in various public documents in the local jurisdiction. The boundaries are intended for cartographic use and spatial analysis only, and not for use as legal descriptions or property surveys. Tax parcel boundaries have not been edge-matched across municipal boundaries.

MassGIS' standardized ("Level 3") property tax parcel mapping data set was developed through a competitive procurement funded by MassGIS. Each community in the Commonwealth was bid on by one or more vendors and the unit of work awarded was a city or town. The specification for this work was Level 3 of the MassGIS Digital Parcel Standard. Standardization of assessor parcel mapping is complete for all 351 Massachusetts' cities and towns. MassGIS is now incorporating updates from municipalities into the database. This hosted feature layer is exported from MassGIS' internal database of the feature class GISDATA.L3_TAXPAR_POLY_ASSESS, which links L3_TAXPAR_POLY and L3_ASSESS. The export includes the expression: (POLY_TYPE IN ('FEE', 'TAX')) OR (POLY_TYPE IN ('ROW', 'PRIV_ROW', 'RAIL_ROW', 'WATER') AND PROP_ID IS NOT NULL) It contains several fields from GISDATA.L3_ASSESS and stacked polygons where multiple assessor records link to a parcel. It contains features that do not have an associated record in GISDATA.L3_ASSESS, except for rights of way and water bodies. ROWs and water bodies with a non-null PROP_ID are included. The data in this feature layer is used for the popups in the Massachusetts Interactive Property Map. See full data descriptionA hosted tile layer will draw very quickly at map scale of 1:18,056 (level 15) to 1:564 (level 20).

This countywide composite of parcels (cadastral) data for Monmouth County represents digitized property boundaries that were developed from best available local and municipal tax maps data. The normalized parcels data are compatible with the New Jersey Department of Treasury MOD-IV system currently used by tax assessors. Stewardship and maintenance of the data continue under the purview of the Monmouth County GIS Office as well as local municipal tax authorities. Parcel attributes were normalized to a standard structure, specified in the New Jersey GIS Parcel Mapping Standard, to store parcel information and provide a PIN (parcel identification number) field common to the PIN that was to be stored in the PAMS (Property Assessment Management System) database to replace the MOD-IV database. Please note that this parcel dataset is not intended for use as tax maps nor for legal purposes. The dataset is intended to provide reasonable representations of parcel boundaries primarily for planning purposes and cartographic representation. Please note cautions when performing a join with this dataset and MOD-IV property records, specifically regarding duplicate and erroneous records. All records may not be provided for in the parcels data or MOD-IV (Tax List Search) tables because of how the data and tables are constructed, or for temporal mismatches. MOD-IV provides for the uniform preparation, maintenance, presentation and storage of property tax information required by the Constitution of the State of New Jersey, New Jersey Statutes and rules promulgated by the Director of Taxation. MOD-IV maintains and updates all assessment records, and produces all statutorily required tax lists. These lists account for all parcels of real property as delineated and identified on each municipality's official tax map, as well as taxable values and descriptive data for each parcel.

© GIS Office, Monmouth County Planning Board, New Jersey.

Updated Weekly*This data set represents tax lots for Jackson County and includes account info (ownership, assessed and real market values, and building information). Data is updated on a weekly basis from assessor tax parcel information. Where there are several different owners on an individual parcel, multiple parcels polygons will exist since parcel to ownership is not a one to one relationship. Some other fields like year built are populated with the first record if multiple exists. For question about parcel updates or issues please contact the Assessor's Office at (541) 774-6059.

The Unpublished Digital Geologic-GIS Map of the Cave Creek School Quadrangle, Texas is composed of GIS data layers and GIS tables in a 10.1 file geodatabase (ccsc_geology.gdb), a 10.1 ArcMap (.mxd) map document (ccsc_geology.mxd), individual 10.1 layer (.lyr) files for each GIS data layer, an ancillary map information document (lyjo_geology.pdf) which contains source map unit descriptions, as well as other source map text, figures and tables, metadata in FGDC text (.txt) and FAQ (.pdf) formats, and a GIS readme file (lyjo_geology_gis_readme.pdf). Please read the lyjo_geology_gis_readme.pdf for information pertaining to the proper extraction of the file geodatabase and other map files. To request GIS data in ESRI 10.1 shapefile format contact Stephanie O'Meara (stephanie.omeara@colostate.edu; see contact information below). Presently, a GRI Google Earth KMZ/KML product doesn't exist for this map. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: Texas Bureau of Economic Geology, University of Texas at Austin. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (ccsc_geology_metadata.txt or ccsc_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:24,000 and United States National Map Accuracy Standards features are within (horizontally) 12.2 meters or 40 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in ArcGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: http://science.nature.nps.gov/im/inventory/geology/GeologyGISDataModel.cfm). The GIS data projection is NAD83, UTM Zone 14N. The data is within the area of interest of Lyndon B. Johnson National Historical Park.

To view and download tax plat maps, click on the DATA tab above. To find a map, select a column heading to sort the table by zone or section number. Or refine your search by the clicking the filter icon at the top of each column. To view or download the tax plat map, click on the URL under ViewMap next to the ZSP map number. Alternatively, use the online Parcel and Zoning Map to search for tax plat maps by address, tax map key (TMK), or using a map interface.

Vector polygon map data of property parcels from Mount Vernon containing 11,202 features.

​

Property parcel GIS map data consists of detailed information about individual land parcels, including their boundaries, ownership details, and geographic coordinates.

​

Property parcel data can be used to analyze and visualize land-related information for purposes such as real estate assessment, urban planning, or environmental management.

​

Available for viewing and sharing as a map in a Koordinates map viewer. This data is also available for export to DWG for CAD, PDF, KML, CSV, and GIS data formats, including Shapefile, MapInfo, and Geodatabase.

​

Note from source:

The data made available in this service is for general information and planning purposes only, and should not be relied upon as a sole informational source. The County of Westchester hereby disclaims any liability for any and all damage, loss, or liability which may result, directly or indirectly, from the use of this GIS mapping system by any person or entity.

​

Tax parcel boundaries represent approximate property line location and should NOT be interpreted as or used in lieu of a survey, property boundary description, or a definitive municipal tax map. Property descriptions must be obtained from surveys or deeds. As this data was compiled from many different sources, discrepancies will exist along some municipal boundaries. Authoritative and approved tax maps for this municipality ONLY reside with the local assessor. For more information please contact the local assessor's office.