Fayette County Ohio GIS Road Centerlines Location Based Response System (LBRS). The information provided is for reference only and subject to independent verification. User assumes all responsibility for its use.https://ogrip.oit.ohio.gov/ProjectsInitiatives/LBRS.aspxOHIO'S LOCATION BASED RESPONSE SYSTEMThe Location Based Response System (LBRS) is an initiative of the Ohio Geographically Referenced Information Program (OGRIP). The LBRS establishes partnerships between State and County government for the creation of spatially accurate street centerlines with address ranges and field verified site-specific address locations.Funding to support the development of LBRS compliant systems is available to counties through a Memorandum of Agreement (MOA) that establishes roles and responsibilities for program participation. Participating counties provide project management and QA/QC on road names, addresses, etc to develop data that is compatible with the state's legacy roadway inventory.The Ohio Department of Transportation is the LBRS Program Sponsor, providing technical guidance, support, and QA/QC services. The program is being administered by OGRIP, the state's coordinating body for Geographic Information System (GIS) activities.Through the collaborative efforts of State and Local government the LBRS program is producing highly accurate field verified data that is current, complete, consistent, and accessible. LBRS data is maintained as an Ohio asset by local resources and is provided to the state as part of a coordinated long-term effort by OGRIP to reduce redundant data collection by developing data that meets the needs of several levels of government.The LBRS supports a multi-jurisdictional approach to protecting the health, safety and welfare of the state’s constituents.LBRS FAQsWhat is the LBRS? The LBRS is a County/State partnership that gathers accurate locational information on all roads and addresses in a county. The information is used to save lives and save taxpayer dollars by reducing redundant data collection activities. The information is web-based, and is therefore current for all stakeholders as agencies or local governments gather new information.Who is using LBRS data? 9-1-1 Dispatch/First Responders, County Auditors, County Commissioners and Engineers, Ohio Highway Patrol/MARCS, County Emergency Management Agencies, Ohio Department of Transportation, US Department of Homeland Security, US Census Bureau, Ohio Department of Natural Resources, Ohio Department of Agriculture, Ohio Utilites Protection Service.“Both disaster planning and emergency response efforts will benefit from the LBRS. By participating, counties may reduce redundant mapping projects while ensuring that Ohio’s citizens do not pay for multiple mapping initiatives.” - Shawn Smith, Ohio 911 Coordinator - Public Utilities Commission of Ohio.How is the state share determined per county? Each county that participates is assigned a ceiling amount, based on number of addressable structures and miles of public roads. The state share does not exceed 50% of the county’s cost of gathering data, and never exceeds the pre-determined ceiling.What other funding sources are available to support a county's LBRS development? The Ohio Department of Transportation (ODOT) and the County Engineers Association of Ohio (CEAO) each administer Safety Grant programs with funds that can be applied to LBRS projects. How are LBRS funds distributed? Counties enter into a Memorandum of Agreement with the state to secure funding. Counties may contract with a vendor or collect information on their own, with OIT/OGRIP and ODOT providing technical guidance throughout the process. Monies are deliverable based, as a County provides data that meets the State defined standards for program acceptance, the monies are released to the County.

Fayette County Ohio GIS Addresses Location Based Response System (LBRS). The information provided is for reference only and subject to independent verification. User assumes all responsibility for its use.https://das.ohio.gov/technology-and-strategy/ogrip/projects/lbrsOHIO'S LOCATION BASED RESPONSE SYSTEMThe Location Based Response System (LBRS) is an initiative of the Ohio Geographically Referenced Information Program (OGRIP). The LBRS establishes partnerships between State and County government for the creation of spatially accurate street centerlines with address ranges and field verified site-specific address locations.Funding to support the development of LBRS compliant systems is available to counties through a Memorandum of Agreement (MOA) that establishes roles and responsibilities for program participation. Participating counties provide project management and QA/QC on road names, addresses, etc to develop data that is compatible with the state's legacy roadway inventory.The Ohio Department of Transportation is the LBRS Program Sponsor, providing technical guidance, support, and QA/QC services. The program is being administered by OGRIP, the state's coordinating body for Geographic Information System (GIS) activities.Through the collaborative efforts of State and Local government the LBRS program is producing highly accurate field verified data that is current, complete, consistent, and accessible. LBRS data is maintained as an Ohio asset by local resources and is provided to the state as part of a coordinated long-term effort by OGRIP to reduce redundant data collection by developing data that meets the needs of several levels of government.The LBRS supports a multi-jurisdictional approach to protecting the health, safety and welfare of the state’s constituents.LBRS FAQsWhat is the LBRS? The LBRS is a County/State partnership that gathers accurate locational information on all roads and addresses in a county. The information is used to save lives and save taxpayer dollars by reducing redundant data collection activities. The information is web-based, and is therefore current for all stakeholders as agencies or local governments gather new information.Who is using LBRS data? 9-1-1 Dispatch/First Responders, County Auditors, County Commissioners and Engineers, Ohio Highway Patrol/MARCS, County Emergency Management Agencies, Ohio Department of Transportation, US Department of Homeland Security, US Census Bureau, Ohio Department of Natural Resources, Ohio Department of Agriculture, Ohio Utilites Protection Service.“Both disaster planning and emergency response efforts will benefit from the LBRS. By participating, counties may reduce redundant mapping projects while ensuring that Ohio’s citizens do not pay for multiple mapping initiatives.” - Shawn Smith, Ohio 911 Coordinator - Public Utilities Commission of Ohio.How is the state share determined per county? Each county that participates is assigned a ceiling amount, based on number of addressable structures and miles of public roads. The state share does not exceed 50% of the county’s cost of gathering data, and never exceeds the pre-determined ceiling.What other funding sources are available to support a county's LBRS development? The Ohio Department of Transportation (ODOT) and the County Engineers Association of Ohio (CEAO) each administer Safety Grant programs with funds that can be applied to LBRS projects. How are LBRS funds distributed? Counties enter into a Memorandum of Agreement with the state to secure funding. Counties may contract with a vendor or collect information on their own, with OIT/OGRIP and ODOT providing technical guidance throughout the process. Monies are deliverable based, as a County provides data that meets the State defined standards for program acceptance, the monies are released to the County.

Download .zipThe Ohio Wetlands Inventory is based on analysis of satellite data by Bruce R. Motsch and Gary M. Schaal and is intended solely as an indicator of wetland sites for which field review should be conducted. The satellite data reflect conditions during the specific year and season the data was acquired and all wetlands may not be indicated. Statistics generated from the inventory are intended solely as an approximation.

The Ohio Wetlands Inventory for Harrison County was produced from May 1987 Landsat Thematic mapper data (cell size 30 meters by 30 meters) using ERDAS Image processing software. The raster data has been converted to ARC/INFO format and exported to an interchange file.

The data was originally georeferenced to UTM zone 17 coordinates NAD 27 and is also available in this coordinate system in ERDAS Imagine format.

The class of woods on hydric soils, wet meadow and farmed wetland fall on hydric soils when digital soils data is available for the county.

Original coverage data was converted from the .e00 file to a more standard ESRI shapefile(s) in November 2014.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesReal Estate & Land ManagementReal Estate and Lands Management2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipMaps and data associated with oil-and-gas wells represent one of the largest datasets at the Ohio Department of Natural Resources. This GIS data layer contains all the locatable oil-and-gas wells in Ohio. The feature is derived from coordinates obtained from the Division of Oil and Gas Resources Management (DOGRM) oil and gas well database – Risk Based Data Management System (RBDMS). The RBDMS database has a long history and is a comprehensive collection of well data from historic pre-1980 paper well records (digitized by the Division of Geological Survey (DGS)) to post-1980 DOGRM database solutions.Since 1860, it is estimated that more than 267,000 oil-and-gas wells have been drilled in Ohio. The compressed file also includes a feature used to connect the surface location to the bottom location of a well that has been drilled directionally or horizontally. This feature is NOT the actual wellbore path, it is simply a graphical representation indicating the relationship between the two well points.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Oil & Gas ResourcesOil and Gas Resources Management2045 Morse Road Bldg F-2Columbus, OH, 43229-6693Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

magery of Pickaway Co - flown for State of Ohio under the OSIP (Ohio Statewide Imagery Program) - Spring 2008 1-foot resolution imagery. Pickaway County converted the imagery into use for their system. OSIP will acquire high-resolution imagery for the State of Ohio to support the geospatial needs of state and local government service providers, Geographic Information System users, and decision makers at all levels of government. This imagery dataset was flown in Spring of 2008 and was disturbed to counties throughout Ohio. https://das.ohio.gov/technology-and-strategy/ogrip/projects/osip In Fall 2022 OGRIP discontinued the OSIP 1 rest services. In regards to this, Pickaway County GIS Dept reconstructed these services for Pickaway County.For further information contact the Pickaway County GIS Dept.For more information:Pickaway County GIS Dept124 W Franklin St.Circleville, Ohio 43113Phone: 740-474-5823Email: jgillow@pickawaycountyohio.govDISCLAIMER: All maps and data posted to this site were created by Pickaway County GIS Department and are for reference use only. All data has been developed from public records that are constantly undergoing change and is not warranted for content, completeness or accuracy. Pickaway County does not warrant, guarantee or represent the data to be fit for a particular use or purpose. If detailed information is required for data layers shown, please contact the GIS Department. Please notify the Pickaway County GIS Department with any discrepancies.

Download .zipThis file contains the data used by the Division of Wildlife for the construction of lake maps. Data was collected in the Ohio State Plane Coordinate System for both the northern and southern state planes in the Lambert Projection Zone. Except for the lakes in extreme western Ohio which is in UTM zone 16N the majority of lakes are in UTM zone 17N and datum NAD83. Data were collected by the Ohio Division of Wildlife using a Trimble GPS Pathfinder Pro XRS receiver and Recon datalogger. Geocoding of depths typically occurred during water levels that were ± 60 cm of full recreational pool while transversing the reservoir at 100m intervals driving at a vessel speed of 2.0-2.5 m/s. Depth contour lines were derived by creating a raster file from the point bathymetry and boundary lake data. ArcGIS Spatial Analyst Interpolation tool outputs point data that is then changed into polyline contours using the Spatial Analyst Surface tool. Additional details on the digitizing process are available upon request.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2045 Morse Rd, Bldg G-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThis file contains the data used by the Division of Wildlife for the construction of lake maps. Data was collected in the Ohio State Plane Coordinate System for both the northern and southern state planes in the Lambert Projection Zone. Except for the lakes in extreme western Ohio which is in UTM zone 16N the majority of lakes are in UTM zone 17N and datum NAD83. Data were collected by the Ohio Division of Wildlife using a Trimble GPS Pathfinder Pro XRS receiver and Recon datalogger. Geocoding of depths typically occurred during water levels that were ± 60 cm of full recreational pool while transversing the reservoir at 100m intervals driving at a vessel speed of 2.0-2.5 m/s. Depth contour lines were derived by creating a raster file from the point bathymetry and boundary lake data. ArcGIS Spatial Analyst Interpolation tool outputs point data that is then changed into polyline contours using the Spatial Analyst Surface tool. Additional details on the digitizing process are available upon request.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2092 Morse Rd, Bldg G-2Columbus, OH, 43276Telephone: 614-265-6509Email: gis.support@dnr.ohio.gov

Download .zipMaps and data associated with oil-and-gas wells represent one of the largest datasets at the Ohio Department of Natural Resources. This GIS data layer contains all the locatable oil-and-gas wells in Ohio. The feature is derived from coordinates obtained from the Division of Oil and Gas Resources Management (DOGRM) oil and gas well database – Risk Based Data Management System (RBDMS). The RBDMS database has a long history and is a comprehensive collection of well data from historic pre-1980 paper well records (digitized by the Division of Geological Survey (DGS)) to post-1980 DOGRM database solutions.Since 1860, it is estimated that more than 267,000 oil-and-gas wells have been drilled in Ohio. The compressed file also includes a feature used to connect the surface location to the bottom location of a well that has been drilled directionally or horizontally. This feature is NOT the actual wellbore path, it is simply a graphical representation indicating the relationship between the two well points.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Oil & Gas ResourcesOil and Gas Resources Management2045 Morse Road Bldg F-2Columbus, OH, 43229-6693Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

The Ohio Statewide Imagery Program (OSIP) is a partnership between State and Local government agencies to develop high-resolution imagery and elevation data for the State of Ohio to benefit Geographic Information System users at all levels of government. Accurate imagery and elevation data serve as the backbone for the development of additional data sets maintained and accessed by government decision makers and the public. Flown 2013For more information:Pickaway County GIS Dept124 W Franklin St.Circleville, Ohio 43113Phone: 740-474-5823Email: jgillow@pickawaycountyohio.govDISCLAIMER: All maps and data posted to this site were created by Pickaway County GIS Department and are for reference use only. All data has been developed from public records that are constantly undergoing change and is not warranted for content, completeness or accuracy. Pickaway County does not warrant, guarantee or represent the data to be fit for a particular use or purpose. If detailed information is required for data layers shown, please contact the GIS Department. Please notify the Pickaway County GIS Department with any discrepancies.

Download .zipThis file contains point data used for the construction of lake maps for State of Ohio. Data was collected in the Ohio State Plane Coordinate System for both the northern and southern state planes in the Lambert Projection Zone. Except for the lakes in extreme western Ohio which is in UTM zone 16N the majority of lakes are in UTM zone 17N and datum NAD83. The data was collected by fisheries biologists with the Ohio Division of Wildlife using a Trimble GPS Pathfinder Pro XRS receiver and Recon datalogger. Geocoding of depths occurred during water levels that were ± 60 cm of full recreational pool while transversing the reservoir at 100m intervals driving at a vessel speed of 2.0-2.5 m/s. Depth contour lines were derived from this data by creating a raster file from the point bathymetry and boundary lake data. The Spatial Analyst Interpolation tool outputs point data that is then changed into polyline contours using the Spatial Analyst Surface tool. Additional details on the digitizing process are available upon request.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2045 Morse Rd, Bldg G-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipMaps and data associated with oil-and-gas wells represent one of the largest datasets at the Ohio Department of Natural Resources. This GIS data layer contains all the locatable oil-and-gas wells in Ohio. The feature is derived from coordinates obtained from the Division of Oil and Gas Resources Management (DOGRM) oil and gas well database – Risk Based Data Management System (RBDMS). The RBDMS database has a long history and is a comprehensive collection of well data from historic pre-1980 paper well records (digitized by the Division of Geological Survey (DGS)) to post-1980 DOGRM database solutions.Since 1860, it is estimated that more than 267,000 oil-and-gas wells have been drilled in Ohio. The compressed file also includes a feature used to connect the surface location to the bottom location of a well that has been drilled directionally or horizontally. This feature is NOT the actual wellbore path, it is simply a graphical representation indicating the relationship between the two well points.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Oil & Gas ResourcesOil and Gas Resources Management2045 Morse Road Bldg F-2Columbus, OH, 43229-6693Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipMaps and data associated with oil-and-gas wells represent one of the largest datasets at the Ohio Department of Natural Resources. This GIS data layer contains all the locatable oil-and-gas wells in Ohio. The feature is derived from coordinates obtained from the Division of Oil and Gas Resources Management (DOGRM) oil and gas well database – Risk Based Data Management System (RBDMS). The RBDMS database has a long history and is a comprehensive collection of well data from historic pre-1980 paper well records (digitized by the Division of Geological Survey (DGS)) to post-1980 DOGRM database solutions.Since 1860, it is estimated that more than 267,000 oil-and-gas wells have been drilled in Ohio. The compressed file also includes a feature used to connect the surface location to the bottom location of a well that has been drilled directionally or horizontally. This feature is NOT the actual wellbore path, it is simply a graphical representation indicating the relationship between the two well points.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Oil & Gas ResourcesOil and Gas Resources Management2045 Morse Road Bldg F-2Columbus, OH, 43229-6693Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipMaps and data associated with oil-and-gas wells represent one of the largest datasets at the Ohio Department of Natural Resources. This GIS data layer contains all the locatable oil-and-gas wells in Ohio. The feature is derived from coordinates obtained from the Division of Oil and Gas Resources Management (DOGRM) oil and gas well database – Risk Based Data Management System (RBDMS). The RBDMS database has a long history and is a comprehensive collection of well data from historic pre-1980 paper well records (digitized by the Division of Geological Survey (DGS)) to post-1980 DOGRM database solutions.Since 1860, it is estimated that more than 267,000 oil-and-gas wells have been drilled in Ohio. The compressed file also includes a feature used to connect the surface location to the bottom location of a well that has been drilled directionally or horizontally. This feature is NOT the actual wellbore path, it is simply a graphical representation indicating the relationship between the two well points.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Oil & Gas ResourcesOil and Gas Resources Management2045 Morse Road Bldg F-2Columbus, OH, 43229-6693Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThis data set represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular surveys. The metadata describes the lineage, sources and production methods for the data content. The definitions and structure of this data is compliant with FGDC Cadastral Data Content Standards and Guidelines for publication. This coverage was originally created for the accurate location of the oil and gas wells in the state of Ohio. The original data set was developed as an ArcInfo coverage containing the original land subdivision boundaries for Ohio. Ohio has had a long and varied history of its land subdivisions that has led to the use of several subdivision strategies being applied. In general, these different schemes are composed of the Public Land Surveying System (PLSS) subdivisions and the irregular land subdivisions. The PLSS subdivisions contain townships, ranges, and sections. They are found in the following major land subdivisions: Old Seven Ranges, Between the Miamis (parts of which are known as the Symmes Purchase), Congress Lands East of Scioto River, Congress Lands North of Old Seven Ranges, Congress Lands West of Miami River, North and East of the First Principal Meridian, South and East of the First Principal Meridian, and the Michigan Meridian Survey. The irregular subdivisions include the Virginia Military District, the Ohio Company Purchase, the U.S. Military District, the Connecticut Western Reserve, the Twelve-Mile Square Reservation, the Two-Mile Square Reservation, the Refugee Lands, the French Grants, and the Donation Tract. This data set represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular surveys. The primary source for the data is local records and geographic control coordinates from states, counties as well as federal agencies such as the BLM, USGS and USFS. The data has been converted from source documents to digital form and transferred into a GIS format that is compliant with FGDC Cadastral Data Content Standards and Guidelines for publication. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. This data set includes the following: PLSS Fully Intersected (all of the PLSS feature at the atomic or smallest polygon level), PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non rectangular components of the PLSS) Meandered Water, Corners and Conflicted Areas (known areas of gaps or overlaps between Townships or state boundaries). The Entity-Attribute section of this metadata describes these components in greater detail.This data set is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. This data set includes the following: PLSS Fully Intersected (all of the PLSS feature at the atomic or smallest polygon level), PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non rectangular components of the PLSS) Meandered Water, Corners and Conflicted Areas (known areas of gaps or overlaps between Townships or state boundaries). The Entity-Attribute section of this metadata describes these components in greater detail.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesOffice of Information TechnologyGIS Records2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThis file contains the data used by the Division of Wildlife for the construction of lake maps. Data was collected in the Ohio State Plane Coordinate System for both the northern and southern state planes in the Lambert Projection Zone. Except for the laContact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2045 Morse Rd, Bldg G-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThis file contains the data used by the Division of Wildlife for the construction of lake maps. Data was collected in the Ohio State Plane Coordinate System for both the northern and southern state planes in the Lambert Projection Zone. Except for the lakes in extreme western Ohio which is in UTM zone 16N the majority of lakes are in UTM zone 17N and datum NAD83. Data were collected by the Ohio Division of Wildlife using a Trimble GPS Pathfinder Pro XRS receiver and Recon datalogger. Geocoding of depths typically occurred during water levels that were ± 60 cm of full recreational pool while transversing the reservoir at 100m intervals driving at a vessel speed of 2.0-2.5 m/s. Depth contour lines were derived by creating a raster file from the point bathymetry and boundary lake data. ArcGIS Spatial Analyst Interpolation tool outputs point data that is then changed into polyline contours using the Spatial Analyst Surface tool. Additional details on the digitizing process are available upon request.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2071 Morse Rd, Bldg G-2Columbus, OH, 43255Telephone: 614-265-6488Email: gis.support@dnr.ohio.gov

Download .zipMaps and data associated with oil-and-gas wells represent one of the largest datasets at the Ohio Department of Natural Resources. This GIS data layer contains all the locatable oil-and-gas wells in Ohio. The feature is derived from coordinates obtained from the Division of Oil and Gas Resources Management (DOGRM) oil and gas well database – Risk Based Data Management System (RBDMS). The RBDMS database has a long history and is a comprehensive collection of well data from historic pre-1980 paper well records (digitized by the Division of Geological Survey (DGS)) to post-1980 DOGRM database solutions.Since 1860, it is estimated that more than 267,000 oil-and-gas wells have been drilled in Ohio. The compressed file also includes a feature used to connect the surface location to the bottom location of a well that has been drilled directionally or horizontally. This feature is NOT the actual wellbore path, it is simply a graphical representation indicating the relationship between the two well points.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Oil & Gas ResourcesOil and Gas Resources Management2045 Morse Road Bldg F-2Columbus, OH, 43229-6693Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThis file contains the data used by the Division of Wildlife for the construction of lake maps. Data was collected in the Ohio State Plane Coordinate System for both the northern and southern state planes in the Lambert Projection Zone. Except for the lakes in extreme western Ohio which is in UTM zone 16N the majority of lakes are in UTM zone 17N and datum NAD83. Data were collected by the Ohio Division of Wildlife using a Trimble GPS Pathfinder Pro XRS receiver and Recon datalogger. Geocoding of depths typically occurred during water levels that were ± 60 cm of full recreational pool while transversing the reservoir at 100m intervals driving at a vessel speed of 2.0-2.5 m/s. Depth contour lines were derived by creating a raster file from the point bathymetry and boundary lake data. ArcGIS Spatial Analyst Interpolation tool outputs point data that is then changed into polyline contours using the Spatial Analyst Surface tool. Additional details on the digitizing process are available upon request.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2045 Morse Rd, Bldg G-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThis file contains the data used by the Division of Wildlife for the construction of lake maps. Data was collected in the Ohio State Plane Coordinate System for both the northern and southern state planes in the Lambert Projection Zone. Except for the lakes in extreme western Ohio which is in UTM zone 16N the majority of lakes are in UTM zone 17N and datum NAD83. Data were collected by the Ohio Division of Wildlife using a Trimble GPS Pathfinder Pro XRS receiver and Recon datalogger. Geocoding of depths typically occurred during water levels that were ± 60 cm of full recreational pool while transversing the reservoir at 100m intervals driving at a vessel speed of 2.0-2.5 m/s. Depth contour lines were derived by creating a raster file from the point bathymetry and boundary lake data. ArcGIS Spatial Analyst Interpolation tool outputs point data that is then changed into polyline contours using the Spatial Analyst Surface tool. Additional details on the digitizing process are available upon request.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2074 Morse Rd, Bldg G-2Columbus, OH, 43258Telephone: 614-265-6491Email: gis.support@dnr.ohio.gov

Download .zipThis file contains point data used for the construction of lake maps for State of Ohio. Data was collected in the Ohio State Plane Coordinate System for both the northern and southern state planes in the Lambert Projection Zone. Except for the lakes in extreme western Ohio which is in UTM zone 16N the majority of lakes are in UTM zone 17N and datum NAD83. The data was collected by fisheries biologists with the Ohio Division of Wildlife using a Trimble GPS Pathfinder Pro XRS receiver and Recon datalogger. Geocoding of depths occurred during water levels that were ± 60 cm of full recreational pool while transversing the reservoir at 100m intervals driving at a vessel speed of 2.0-2.5 m/s. Depth contour lines were derived from this data by creating a raster file from the point bathymetry and boundary lake data. The Spatial Analyst Interpolation tool outputs point data that is then changed into polyline contours using the Spatial Analyst Surface tool. Additional details on the digitizing process are available upon request.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Wildlife2091 Morse Rd, Bldg G-2Columbus, OH, 43275Telephone: 614-265-6508Email: gis.support@dnr.ohio.gov