In 2023, the real gross domestic product (GDP) of Texas increased by roughly *** percent compared to the previous year. The state's real GDP experienced the most growth in 2006, when the GDP increased by *** percent when compared to the previous year.

About this dataset

Context

The dataset tabulates the Texas population over the last 20 plus years. It lists the population for each year, along with the year on year change in population, as well as the change in percentage terms for each year. The dataset can be utilized to understand the population change of Texas across the last two decades. For example, using this dataset, we can identify if the population is declining or increasing. If there is a change, when the population peaked, or if it is still growing and has not reached its peak. We can also compare the trend with the overall trend of United States population over the same period of time.

Key observations

In 2024, the population of Texas was 31.29 million, a 1.83% increase year-by-year from 2023. Previously, in 2023, Texas population was 30.73 million, an increase of 2.04% compared to a population of 30.11 million in 2022. Over the last 20 plus years, between 2000 and 2024, population of Texas increased by 10.35 million. In this period, the peak population was 31.29 million in the year 2024. The numbers suggest that the population has not reached its peak yet and is showing a trend of further growth. Source: U.S. Census Bureau Population Estimates Program (PEP).

Content

When available, the data consists of estimates from the U.S. Census Bureau Population Estimates Program (PEP).

Data Coverage:

• From 2000 to 2024

Variables / Data Columns

• Year: This column displays the data year (Measured annually and for years 2000 to 2024)
• Population: The population for the specific year for the Texas is shown in this column.
• Year on Year Change: This column displays the change in Texas population for each year compared to the previous year.
• Change in Percent: This column displays the year on year change as a percentage. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Texas Population by Year. You can refer the same here

Graph and download economic data for Resident Population in Texas (TXPOP) from 1900 to 2024 about residents, TX, population, and USA.

Chart and table of population level and growth rate for the state of Texas from 1900 to 2024.

In 2023, about **** million people lived in Texas. This was an increase from the previous year, when about ***** million people lived in the state. In 1960, the resident population of Texas stood at about **** million people.

About this dataset

Context

The dataset tabulates the Parker County population over the last 20 plus years. It lists the population for each year, along with the year on year change in population, as well as the change in percentage terms for each year. The dataset can be utilized to understand the population change of Parker County across the last two decades. For example, using this dataset, we can identify if the population is declining or increasing. If there is a change, when the population peaked, or if it is still growing and has not reached its peak. We can also compare the trend with the overall trend of United States population over the same period of time.

Key observations

In 2023, the population of Parker County was 173,494, a 4.55% increase year-by-year from 2022. Previously, in 2022, Parker County population was 165,938, an increase of 5.63% compared to a population of 157,088 in 2021. Over the last 20 plus years, between 2000 and 2023, population of Parker County increased by 84,329. In this period, the peak population was 173,494 in the year 2023. The numbers suggest that the population has not reached its peak yet and is showing a trend of further growth. Source: U.S. Census Bureau Population Estimates Program (PEP).

Content

When available, the data consists of estimates from the U.S. Census Bureau Population Estimates Program (PEP).

Data Coverage:

• From 2000 to 2023

Variables / Data Columns

• Year: This column displays the data year (Measured annually and for years 2000 to 2023)
• Population: The population for the specific year for the Parker County is shown in this column.
• Year on Year Change: This column displays the change in Parker County population for each year compared to the previous year.
• Change in Percent: This column displays the year on year change as a percentage. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Parker County Population by Year. You can refer the same here

Graph and download economic data for Future Growth Rate of Orders; Percentage Reporting No Change for Texas (FGRONUAMFRBDAL) from Jun 2004 to Jun 2025 about orders, TX, rate, and USA.

About this dataset

Context

The dataset tabulates the Austin County population over the last 20 plus years. It lists the population for each year, along with the year on year change in population, as well as the change in percentage terms for each year. The dataset can be utilized to understand the population change of Austin County across the last two decades. For example, using this dataset, we can identify if the population is declining or increasing. If there is a change, when the population peaked, or if it is still growing and has not reached its peak. We can also compare the trend with the overall trend of United States population over the same period of time.

Key observations

In 2023, the population of Austin County was 31,677, a 1.95% increase year-by-year from 2022. Previously, in 2022, Austin County population was 31,070, an increase of 2.10% compared to a population of 30,431 in 2021. Over the last 20 plus years, between 2000 and 2023, population of Austin County increased by 7,856. In this period, the peak population was 31,677 in the year 2023. The numbers suggest that the population has not reached its peak yet and is showing a trend of further growth. Source: U.S. Census Bureau Population Estimates Program (PEP).

Content

When available, the data consists of estimates from the U.S. Census Bureau Population Estimates Program (PEP).

Data Coverage:

• From 2000 to 2023

Variables / Data Columns

• Year: This column displays the data year (Measured annually and for years 2000 to 2023)
• Population: The population for the specific year for the Austin County is shown in this column.
• Year on Year Change: This column displays the change in Austin County population for each year compared to the previous year.
• Change in Percent: This column displays the year on year change as a percentage. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Austin County Population by Year. You can refer the same here

This statistic shows the revenue of the industry “professional and management development training“ in Texas from 2012 to 2017, with a forecast to 2024. It is projected that the revenue of professional and management development training in Texas will amount to approximately 479,3 million U.S. Dollars by 2024.

This dataset consists of growth and yield data for each season when soybean [Glycine max (L.) Merr.] was grown for seed at the USDA-ARS Conservation and Production Laboratory (CPRL), Soil and Water Management Research Unit (SWMRU) research weather station, Bushland, Texas (Lat. 35.186714°, Long. -102.094189°, elevation 1170 m above MSL). In the 1994, 2003, 2004, and 2010 seasons, soybean was grown on two large, precision weighing lysimeters, each in the center of a 4.44 ha square field. In 2019, soybean was grown on four large, precision weighing lysimeters and their surrounding 4.4 ha fields. The square fields are themselves arranged in a larger square with four fields in four adjacent quadrants of the larger square. Fields and lysimeters within each field are thus designated northeast (NE), southeast (SE), northwest (NW), and southwest (SW). Soybean was grown on different combinations of fields in different years. Irrigation was by linear move sprinkler system in 1995, 2003, 2004, and 2010 although in 2010 only one irrigation was applied to establish the crop after which it was grown as a dryland crop. Irrigation protocols described as full were managed to replenish soil water used by the crop on a weekly or more frequent basis as determined by soil profile water content readings made with a neutron probe to 2.4-m depth in the field. Irrigation protocols described as deficit typically involved irrigations to establish the crop early in the season, followed by reduced or absent irrigations later in the season (typically in the later winter and spring). The growth and yield data include plant population density, height, plant row width, leaf area index, growth stage, total above-ground biomass, leaf and stem biomass, head mass (when present), kernel or seed number, and final yield. Data are from replicate samples in the field and non-destructive (except for final harvest) measurements on the weighing lysimeters. In most cases yield data are available from both manual sampling on replicate plots in each field and from machine harvest. Machine harvest yields are commonly smaller than hand harvest yields due to combine losses. These datasets originate from research aimed at determining crop water use (ET), crop coefficients for use in ET-based irrigation scheduling based on a reference ET, crop growth, yield, harvest index, and crop water productivity as affected by irrigation method, timing, amount (full or some degree of deficit), agronomic practices, cultivar, and weather. Prior publications have focused on soybean ET, crop coefficients, and crop water productivity. Crop coefficients have been used by ET networks. The data have utility for testing simulation models of crop ET, growth, and yield and have been used for testing, and calibrating models of ET that use satellite and/or weather data. See the README for descriptions of each data file. Resources in this dataset:Resource Title: 1995 Bushland, TX, west soybean growth and yield data. File Name: 1995 West Soybean_Growth_and_Yield-V2.xlsxResource Title: 2003 Bushland, TX, east soybean growth and yield data. File Name: 2003 East Soybean_Growth_and_Yield-V2.xlsxResource Title: 2004 Bushland, TX, east soybean growth and yield data. File Name: 2004 East Soybean_Growth-and_Yield-V2.xlsxResource Title: 2019 Bushland, TX, east soybean growth and yield data. File Name: 2019 East Soybean_Growth_and_Yield-V2.xlsxResource Title: 2019 Bushland, TX, west soybean growth and yield data. File Name: 2019 West Soybean_Growth_and_Yield-V2.xlsxResource Title: 2010 Bushland, TX, west soybean growth and yield data. File Name: 2010 West_Soybean_Growth_and_Yield-V2.xlsxResource Title: README. File Name: README_Soybean_Growth_and_Yield.txt

This dataset consists of growth and yield data for each season when sorghum [Sorghum bicolor (L.)] was grown at the USDA-ARS Conservation and Production Laboratory (CPRL), Soil and Water Management Research Unit (SWMRU) research weather station, Bushland, Texas (Lat. 35.186714°, Long. -102.094189°, elevation 1170 m above MSL). In the 1988, 1991, 1993, 1997, 1998, 1999, 2003 through 2007, 2014, and 2015 seasons (13 years), sorghum was grown on from one to four large, precision weighing lysimeters, each in the center of a 4.44 ha square field also planted to sorghum. The square fields were themselves arranged in a larger square with four fields in four adjacent quadrants of the larger square. Fields and lysimeters within each field were thus designated northeast (NE), southeast (SE), northwest (NW), and southwest (SW). Sorghum was grown on different combinations of fields in different years. When irrigated, irrigation was by linear move sprinkler system years before 2014, and by both sprinkler and subsurface drip irrigation in 2014 and 2015. Irrigation protocols described as full were managed to replenish soil water used by the crop on a weekly or more frequent basis as determined by soil profile water content readings made with a neutron probe to 2.4-m depth in the field. Irrigation protocols described as deficit typically involved irrigation at rates established as percentages of full irrigation ranging from 33% to 75% depending on the year. The growth and yield data include plant population density, height, plant row width, leaf area index, growth stage, total above-ground biomass, leaf and stem biomass, head mass (when present), seed mass, and final yield. Data are from replicate samples in the field and non-destructive (except for final harvest) measurements on the weighing lysimeters. In most cases yield data are available from both manual sampling on replicate plots in each field and from machine harvest. Machine harvest yields are commonly smaller than hand harvest yields due to combine losses. These datasets originate from research aimed at determining crop water use (ET), crop coefficients for use in ET-based irrigation scheduling based on a reference ET, crop growth, yield, harvest index, and crop water productivity as affected by irrigation method, timing, amount (full or some degree of deficit), agronomic practices, cultivar, and weather. Prior publications have focused on sorghum ET, crop coefficients, crop water productivity, and simulation modeling of crop water use, growth, and yield. Crop coefficients have been used by ET networks. The data have utility for testing simulation models of crop ET, growth, and yield and have been used for testing, and calibrating models of ET that use satellite and/or weather data. See the README for descriptions of each data file.

This dataset consists of growth and yield data for each season when upland cotton [Gossympium hirsutum (L.)] was grown for lint and seed at the USDA-ARS Conservation and Production Research Laboratory (CPRL), Soil and Water Management Research Unit (SWMRU), Bushland, Texas (Lat. 35.186714°, Long. -102.094189°, elevation 1170 m above MSL). In the 2000 through 2004, 2008, 2010, 2012, and 2020 seasons, cotton was grown on from one to four large, precision weighing lysimeters, each in the center of a 4.44 ha square field also planted to cotton. The square fields were themselves arranged in a larger square with four fields in four adjacent quadrants of the larger square. Fields and lysimeters within each field were thus designated northeast (NE), southeast (SE), northwest (NW), and southwest (SW). Cotton was grown on different combinations of fields in different years. When irrigated, irrigation was by linear move sprinkler system years before 2014, and by both sprinkler and subsurface drip irrigation in 2020. Irrigation protocols described as full were managed to replenish soil water used by the crop on a weekly or more frequent basis as determined by soil profile water content readings made with a neutron probe to 2.4-m depth in the field. Irrigation protocols described as deficit typically involved irrigation at rates established as percentages of full irrigation ranging from 33% to 75% depending on the year. The growth and yield data typically include plant population density, height, plant row width, leaf area index, growth stage, total above-ground biomass, leaf and stem biomass, boll mass (when present), lint mass, seed mass, final yield, and lint quality. Data are from replicate samples in the field and non-destructive (except for final harvest) measurements on the weighing lysimeters. In most cases yield data are available from only manual sampling on replicate plots in each field and lysimeters. These datasets originate from research aimed at determining crop water use (ET), crop coefficients for use in ET-based irrigation scheduling based on a reference ET, crop growth, yield, harvest index, and crop water productivity as affected by irrigation method, timing, amount (full or some degree of deficit), agronomic practices, cultivar, and weather. Prior publications have focused on cotton ET, crop coefficients, crop water productivity, and simulation modeling of crop water use, growth, and yield. Crop coefficients have been used by ET networks. The data have utility for testing simulation models of crop ET, growth, and yield and have been used for testing, and calibrating models of ET that use satellite and/or weather data. See the README for descriptions of each data file.

In 2022, the fastest growing private company in Texas was health services company, eTrueNorth. That year, they grew ****** percent. Following eTrueNorth was StaffDNA, which grew ****** percent.

Graph and download economic data for Current Growth Rate of Orders; Percentage Reporting No Change for Texas (GRONSAMFRBDAL) from Jun 2004 to Jun 2025 about orders, TX, rate, and USA.

This dataset consists of growth and yield data for each year when alfalfa was grown at the USDA-ARS Conservation and Production Laboratory (CPRL), Soil and Water Management Research Unit (SWMRU) research weather station, Bushland, Texas (Lat. 35.186714°, Long. -102.094189°, elevation 1170 m above MSL). Alfalfa was grown on two large, precision weighing lysimeters, each in the center of a 4.44 ha square field. The two square fields were themselves arranged with one directly north of and contiguous with the other. The two fields and lysimeters within each field were designated northeast (NE), and southeast (SE). Irrigation was by linear move sprinkler system in autumn 1995 when the alfalfa was planted through 1999. Irrigations were managed to replenish soil water used by the crop on a weekly or more frequent basis as determined by soil profile water content readings made with a neutron probe to 2.4-m depth in the field. The growth and yield data include height, leaf area index, growth stage, total above-ground biomass, leaf and stem biomass, and final yield. Data are from replicate samples in the field and non-destructive (except for harvest) measurements on the weighing lysimeters. In most cases yield data are available from both manual sampling on replicate plots in each field and from machine harvest. These datasets originate from research aimed at determining crop water use (ET), crop coefficients for use in ET-based irrigation scheduling based on a reference ET, crop growth, yield, harvest index, and crop water productivity as affected by irrigation method, timing, amount (full or some degree of deficit), agronomic practices, cultivar, and weather. Prior publications have focused on alfalfa ET, comparisons with "tall crop" reference ET, crop coefficients, and crop water productivity. Crop coefficients have been used by ET networks. The data have utility for testing simulation models of crop ET, growth, and yield, and for studies of reference ET methods. Resources in this dataset: Resource Title: 1999 Bushland, TX, east alfalfa growth and yield data. File Name: 1999_alfalfa_plantgrowth&_yield.xlsx. Resource Description: This dataset consists of growth and yield data the 1999 season when alfalfa was grown at the USDA-ARS Conservation and Production Laboratory (CPRL), Soil and Water Management Research Unit (SWMRU) research weather station, Bushland, Texas (Lat. 35.186714°, Long. -102.094189°, elevation 1170 m above MSL). Alfalfa was grown on two large, precision weighing lysimeters, each in the center of a 4.44 ha square field. The two square fields were themselves arranged with one directly north of and contiguous with the other. Fields and lysimeters within each field were designated northeast (NE), and southeast (SE). Irrigation was by linear move sprinkler system. Irrigations were managed to replenish soil water used by the crop on a weekly or more frequent basis as determined by soil profile water content readings made with a neutron probe to 2.4-m depth in the field. Irrigation management resulted in the crop being well watered and meeting reference “tall crop” conditions during periods before harvests. The growth and yield data include plant height, leaf area index, growth stage, total above-ground biomass, leaf and stem biomass, and final yield. Data are from replicate samples in the field and non-destructive (except for final harvest) measurements on the weighing lysimeters. In most cases yield data are available from both manual sampling on replicate plots in each field and from machine harvest. There is a single spreadsheet for the east (NE and SE) lysimeters and fields. The spreadsheets contain tabs for data and corresponding tabs for data dictionaries. Typically, there are separate data tabs and corresponding dictionaries for plant growth during the season, crop growth stage, plant population, manual harvest from replicate plots in each field and from lysimeter surfaces, and machine (combine) harvest. An Introduction tab explains the tab names and contents, lists the authors, explains conventions, and lists some relevant references. Resource Title: 1998 Bushland, TX, east alfalfa growth and yield data. File Name: 1998_alfalfa_plantgrowth&_yield.xlsx. Resource Description: As described above, for 1998 season. Resource Title: 1997 Bushland, TX, east alfalfa growth and yield data. File Name: 1997_alfalfa_plantgrowth&_yield.xlsx. Resource Description: As described above, for 1997 season. Resource Title: 1996 Bushland, TX, east alfalfa growth and yield data. File Name: 1996_alfalfa_plantgrowth&_yield.xlsx. Resource Description: As described above, for 1996 season.

About this dataset

Context

The dataset tabulates the Fort Worth population over the last 20 plus years. It lists the population for each year, along with the year on year change in population, as well as the change in percentage terms for each year. The dataset can be utilized to understand the population change of Fort Worth across the last two decades. For example, using this dataset, we can identify if the population is declining or increasing. If there is a change, when the population peaked, or if it is still growing and has not reached its peak. We can also compare the trend with the overall trend of United States population over the same period of time.

Key observations

In 2023, the population of Fort Worth was 978,468, a 2.23% increase year-by-year from 2022. Previously, in 2022, Fort Worth population was 957,103, an increase of 2.08% compared to a population of 937,590 in 2021. Over the last 20 plus years, between 2000 and 2023, population of Fort Worth increased by 432,709. In this period, the peak population was 978,468 in the year 2023. The numbers suggest that the population has not reached its peak yet and is showing a trend of further growth. Source: U.S. Census Bureau Population Estimates Program (PEP).

Content

When available, the data consists of estimates from the U.S. Census Bureau Population Estimates Program (PEP).

Data Coverage:

• From 2000 to 2023

Variables / Data Columns

• Year: This column displays the data year (Measured annually and for years 2000 to 2023)
• Population: The population for the specific year for the Fort Worth is shown in this column.
• Year on Year Change: This column displays the change in Fort Worth population for each year compared to the previous year.
• Change in Percent: This column displays the year on year change as a percentage. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Fort Worth Population by Year. You can refer the same here

This dataset consists of growth and yield data for each season when sunflower (Helianthus annuus L.) was grown for seed at the USDA-ARS Conservation and Production Laboratory (CPRL), Soil and Water Management Research Unit (SWMRU) research weather station, Bushland, Texas (Lat. 35.186714°, Long. -102.094189°, elevation 1170 m above MSL). In each season, sunflower was grown on two large, precision weighing lysimeters, each in the center of a 4.44 ha square field. The square fields are themselves arranged in a larger square with four fields in four adjacent quadrants of the larger square. Fields and lysimeters within each field are thus designated northeast (NE), southeast (SE), northwest (NW), and southwest (SW). Sunflower was grown in the NE and SE fields. Irrigation was by linear move sprinkler system. Irrigation protocols described as full were managed to replenish soil water used by the crop on a weekly or more frequent basis as determined by soil profile water content readings made with a neutron probe to 2.4-m depth in the field. Irrigation protocols described as deficit typically involved irrigations to establish the crop early in the season, followed by reduced or absent irrigations later in the season (typically in the later winter and spring). The growth and yield data include plant population density, height, plant row width, leaf area index, growth stage, total above-ground biomass, leaf and stem biomass, head mass (when present), kernel number, and final yield. Data are from replicate samples in the field and non-destructive (except for final harvest) measurements on the weighing lysimeters. In most cases yield data are available from both manual sampling on replicate plots in each field and from machine harvest. These datasets originate from research aimed at determining crop water use (ET), crop coefficients for use in ET-based irrigation scheduling based on a reference ET, crop growth, yield, harvest index, and crop water productivity as affected by irrigation method, timing, amount (full or some degree of deficit), agronomic practices, cultivar, and weather. Prior publications have focused on sunflower ET, crop coefficients, and crop water productivity. Crop coefficients have been used by ET networks. The data have utility for testing simulation models of crop ET, growth, and yield and have been used for testing, and calibrating models of ET that use satellite and/or weather data. Resources in this dataset:Resource Title: 2009 Bushland, TX, east sunflower growth and yield data. File Name: 2009_East_Sunflower_Growth_and_Yield.xlsxResource Description: This dataset consists of growth and yield data the 2009 season when sunflower (Helianthus annuus L.) was grown at the USDA-ARS Conservation and Production Laboratory (CPRL), Soil and Water Management Research Unit (SWMRU) research weather station, Bushland, Texas (Lat. 35.186714°, Long. -102.094189°, elevation 1170 m above MSL). Sunflower was grown on two large, precision weighing lysimeters, each in the center of a 4.44 ha square field. The two square fields were themselves arranged with one directly north of and contiguous with the other. Fields and lysimeters within each field were designated northeast (NE), and southeast (SE). Irrigation was by linear move sprinkler system. Irrigations were managed to replenish soil water used by the crop on a weekly or more frequent basis as determined by soil profile water content readings made with a neutron probe to 2.4-m depth in the field. Irrigation management resulted in the crop being well watered and meeting reference “tall crop” conditions during periods before harvests. The growth and yield data include plant height, plant row width, leaf area index, growth stage, total above-ground biomass, leaf and stem biomass, and final yield. Data are from replicate samples in the field and non-destructive (except for final harvest) measurements on the weighing lysimeters. In most cases yield data are available from both manual sampling on replicate plots in each field and from machine harvest. There is a single spreadsheet for the east (NE and SE) lysimeters and fields. The spreadsheet contains tabs for data and corresponding tabs for data dictionaries. There are separate data tabs and corresponding dictionaries for plant growth during the season, and manual harvest from replicate plots in each field and from lysimeter surfaces, and machine (combine) harvest, An Introduction tab explains the tab names and contents, lists the authors, explains conventions, and lists some relevant references.Resource Title: 2011 Bushland, TX, east sunflower growth and yield data. File Name: 2011_East_Sunflower_Growth_and_Yield.xlsxResource Description: This dataset consists of growth and yield data the 2011 season when sunflower (Helianthus annuus L.) was grown at the USDA-ARS Conservation and Production Laboratory (CPRL), Soil and Water Management Research Unit (SWMRU) research weather station, Bushland, Texas (Lat. 35.186714°, Long. -102.094189°, elevation 1170 m above MSL). Sunflower was grown on two large, precision weighing lysimeters, each in the center of a 4.44 ha square field. The two square fields were themselves arranged with one directly north of and contiguous with the other. Fields and lysimeters within each field were designated northeast (NE), and southeast (SE). Irrigation was by linear move sprinkler system. Irrigations were managed to replenish soil water used by the crop on a weekly or more frequent basis as determined by soil profile water content readings made with a neutron probe to 2.4-m depth in the field. Irrigation management resulted in the crop being well watered and meeting reference “tall crop” conditions during periods before harvests. The growth and yield data include plant height, plant row width, leaf area index, growth stage, total above-ground biomass, leaf and stem biomass, and final yield. Data are from replicate samples in the field and non-destructive (except for final harvest) measurements on the weighing lysimeters. In most cases yield data are available from both manual sampling on replicate plots in each field and from machine harvest. There is a single spreadsheet for the east (NE and SE) lysimeters and fields. The spreadsheet contains tabs for data and corresponding tabs for data dictionaries. There are separate data tabs and corresponding dictionaries for plant growth during the season, and manual harvest from replicate plots in each field and from lysimeter surfaces, and machine (combine) harvest, An Introduction tab explains the tab names and contents, lists the authors, explains conventions, and lists some relevant references.

Current Growth Rate of Orders; Percentage Reporting No Change for Texas was 55.80% in April of 2025, according to the United States Federal Reserve. Historically, Current Growth Rate of Orders; Percentage Reporting No Change for Texas reached a record high of 70.10 in December of 2013 and a record low of 21.90 in April of 2020. Trading Economics provides the current actual value, an historical data chart and related indicators for Current Growth Rate of Orders; Percentage Reporting No Change for Texas - last updated from the United States Federal Reserve on June of 2025.

Current Growth Rate of Orders; Percentage Reporting Increases for Texas was 15.90% in May of 2025, according to the United States Federal Reserve. Historically, Current Growth Rate of Orders; Percentage Reporting Increases for Texas reached a record high of 41.10 in April of 2021 and a record low of 4.80 in April of 2020. Trading Economics provides the current actual value, an historical data chart and related indicators for Current Growth Rate of Orders; Percentage Reporting Increases for Texas - last updated from the United States Federal Reserve on July of 2025.

United States Texas Manufacturing Outlook: sa: Future Growth Rate of Orders data was reported at 37.700 % in Jun 2018. This stayed constant from the previous number of 37.700 % for May 2018. United States Texas Manufacturing Outlook: sa: Future Growth Rate of Orders data is updated monthly, averaging 28.000 % from Jun 2004 (Median) to Jun 2018, with 169 observations. The data reached an all-time high of 55.400 % in Sep 2004 and a record low of -12.000 % in Dec 2008. United States Texas Manufacturing Outlook: sa: Future Growth Rate of Orders data remains active status in CEIC and is reported by Federal Reserve Bank of Dallas. The data is categorized under Global Database’s USA – Table US.S014: Texas Manufacturing Outlook Survey.