The Digital Geologic-GIS Map of Sagamore Hill National Historic Site and Vicinity, New York is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (sahi_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (sahi_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (sahi_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) A GIS readme file (sahi_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (sahi_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (sahi_geology_metadata_faq.pdf). Please read the sahi_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: https://www.google.com/earth/versions/. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (sahi_geology_metadata.txt or sahi_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:62,500 and United States National Map Accuracy Standards features are within (horizontally) 31.8 meters or 104.2 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

All of the ERS mapping applications, such as the Food Environment Atlas and the Food Access Research Atlas, use map services developed and hosted by ERS as the source for their map content. These map services are open and freely available for use outside of the ERS map applications. Developers can include ERS maps in applications through the use of the map service REST API, and desktop GIS users can use the maps by connecting to the map server directly.

A web map used to access tax parcel, boundary, ownership, acreage, survey, zoning and tax information. Errors and Omissions Do Exist.The information provided is for reference only and subject to independent verification. User assumes all responsibility for its use.https://www.fayette-co-oh.com/Fayette County ProfileFayette County is a county located in the U.S. state of Ohio. Its county seat is Washington Court House. Fayette County was formed on March 1, 1810 from portions of Highland County and Ross County. It was named after Marie-Joseph Motier, Marquis de La Fayette, a French general and politician who took the side of the Colonials during the American Revolutionary War and who played an important role in the French Revolution.Fayette County is a part of the Virginia Military survey, which was reserved in 1783, to be allotted to Virginia soldiers. This district includes the entire counties of Adams, Brown, Clermont, Clinton, Highland, Fayette, Madison and Union; and a portion of the counties of Scioto, Pike, Ross, Pickaway, Franklin, Delaware, Marion, Hardin, Logan, Champaign, Clarke, Greene, Warren and Hamilton.Fayette County was formed January 19, 1810 (took effect March 1st) from Ross and Highland counties. Beginning at the southwest corner of Pickaway, running north “with the line of said county to the corner of Madison; thence west with the line of said Madison county to the line of Greene county; thence south with the line of Greene county to the southeast corner thereof; thence east five miles; thence south to the line of Highland county; thence east with said line to Paint Creek; thence in a straight line to the beginning.” All the lower portion was taken from Highland and the upper from Ross.The first portion of land entered within the territory of what is now Fayette county, was a part of original surveys Nos. 243 and 772, lying partly in Clinton county. The first survey lying wholly within Fayette county was No. 463, in what is now Madison township, surveyed for Thomas Overton by John O’Bannon June 30, 1776.The original townships were Jefferson, Greene, Wayne, Madison, Paint and Union. Concord township was formed in April 1818, from Greene. Marion township was formed in June, 1840 from Madison. Perry township was formed June 4, 1845, from Wayne and Greene. Jasper township was formed from Jefferson and Concord December 2, 1845.Washington C.H. was laid out originally on a part of entry 757, which contained 1200 acres and belonged to Benjamin Temple, of Logan county, Kentucky, who donated 150 acres to Fayette county, on condition that it be used as the site of the county seat. The deed of conveyance was made December 1, 1810, by Thomas S. Hind, attorney for Temple, to Robert Stewart, who was appointed by the legislature as director for the town of Washington. The town was laid off some time between December 1, 1810, and February 26, 1811, the latter being the date of the record of the town plat.Bloomingburg (originally called New Lexington) was laid out in 1815, by Solomon Bowers, and originally contained 34 and ¾ acres. On March 4, 1816, Bowers laid out and added twenty more lots. The name of the town was later changed to Bloomingburg by act of the legislature. The town was incorporated by act of the legislature, February 5, 1847.Jeffersonville was laid out March 1, 1831, by Walter B. Write and Chipman Robinson, on 100 acres of land belonging to them, they started selling the lots at $5 each. The town incorporated March 17, 1838. The first house was erected by Robert Wyley.The first railroad, now the C. & M. V., was completed in 1852; the second, now the Detroit Southern, in 1875; the third, now the C.H. & D. in 1879; and the fourth, now the B. & O. S. W., in 1884.The first permanent settler (probably) was a Mr. Wolf who settled in what is now Wayne township, in about the year 1796. - Circa 1886 - Map of Fayette County, Ohio. Issued by the Fayette County Record.

Web-based GIS mapping application.Contains all available GIS and mapping resources for Cuyahoga County.Use the application to explore data using the available search, identify, and query tools; markup the map with the drawing tools; export the map to a geo-referenced image file; print the map to PDF with a custom title and include a legend and scale.View the 'Help Guide' for FAQs, tool tips, and additional information about the application and the data.

This web map references the live tiled map service from the OpenStreetMap project. OpenStreetMap (OSM) is an open collaborative project to create a free editable map of the world. Volunteers gather location data using GPS, local knowledge, and other free sources of information such as free satellite imagery, and upload it. The resulting free map can be viewed and downloaded from the OpenStreetMap server: http://www.OpenStreetMap.org. See that website for additional information about OpenStreetMap. It is made available as a basemap for GIS work in Esri products under a Creative Commons Attribution-ShareAlike license.Tip: This service is one of the basemaps used in the ArcGIS.com map viewer and ArcGIS Explorer Online. Simply click one of those links to launch the interactive application of your choice, and then choose Open Street Map from the Basemap control to start using this service. You'll also find this service in the Basemap gallery in ArcGIS Explorer Desktop and ArcGIS Desktop 10.

This mapping tool provides a representation of the general watershed boundaries for stream systems declared fully appropriated by the State Water Board. The boundaries were created by Division of Water Rights staff by delineating FASS critical reaches and consolidating HUC 12 sub-watersheds to form FASS Watershed boundaries. As such, the boundaries are in most cases conservative with respect to the associated stream system. However, users should check neighboring FASS Watersheds to ensure the stream system of interest is not restricted by other FASS listings. For more information regarding the Declaration of Fully Appropriated Stream Systems, visit the Division of Water Rights’ Fully Appropriated Streams webpage. How to Use the Interactive Mapping Tool: If it is your first time viewing the map, you will need to click the “OK” box on the splash screen and agree to the disclaimer before continuing. Navigate to your point of interest by either using the search bar or by zooming in on the map. You may enter a stream name, street address, or watershed ID in the search bar. Click on the map to identify the location of interest and one or more pop-up boxes may appear with information about the fully appropriated stream systems within the general watershed boundaries of the identified location. The information provided in the pop-up box may include: (a) stream name, (b) tributary, (c) season declared fully appropriated, (d) Board Decisions/Water Right Orders, and/or (e) court references/adjudications. You may toggle the FAS Streams reference layer on and off to find representative critical reaches associated with the FASS Watershed layer. Please note that this layer is for general reference purposes only and ultimately the critical reach listed in Appendix A of Water Rights Order 98-08 and Appendix A together with any associated footnotes controls. Note: A separate FAS Watershed boundary layer was created for the Bay-Delta Watershed. The Bay-Delta Watershed layer should be toggled on to check if the area of interest is fully appropriated under State Water Board Decision 1594.

The Digital Geologic-GIS Map of the Rhoda Quadrangle, Kentucky is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (rhod_geology.gdb), and a 2.) Open Geospatial Consortium (OGC) geopackage. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (rhod_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (rhod_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) a readme file (maca_abli_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (maca_abli_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (rhod_geology_metadata_faq.pdf). Please read the maca_abli_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. QGIS software is available for free at: https://www.qgis.org/en/site/. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (rhod_geology_metadata.txt or rhod_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:24,000 and United States National Map Accuracy Standards features are within (horizontally) 12.2 meters or 40 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

DCGIS is an interactive map that provides increased functionality for advanced users as well as access to about 150 layers of GIS data, including parcel information, contour lines, aerial photography, county park amenities, park trails, bikeways, county road construction, roundabouts, floodplains and more. It allows you to create a map at any scale you wish.
The Interactive GIS Map is intended for use on any device - mobile or desktop - with high speed access.

The market for GIS Mapping Tools is projected to reach a value of $XX million by 2033, growing at a CAGR of XX% during the forecast period (2025-2033). The market growth is attributed to the increasing adoption of GIS mapping tools by various industries, including government, utilities, and telecom, for a wide range of applications such as geological exploration, water conservancy projects, and urban planning. The convergence of GIS with other technologies such as artificial intelligence (AI) and the Internet of Things (IoT) is further driving market growth, as these technologies enable GIS mapping tools to provide more accurate and real-time data analysis. The market is segmented by type (cloud-based, web-based), application (geological exploration, water conservancy projects, urban planning, others), and region (North America, Europe, Asia Pacific, Middle East & Africa). North America is expected to remain the largest market for GIS mapping tools throughout the forecast period, due to the early adoption of these technologies and the presence of leading vendors such as Esri, MapInfo, and Autodesk. Asia Pacific is expected to experience the highest growth rate during the forecast period, due to the increasing adoption of GIS mapping tools in emerging economies such as China and India. Key industry players include Golden Software Surfer, Geoway, QGIS, GRASS GIS, Google Earth Pro, CARTO, Maptive, Shenzhen Edraw Software, MapGIS, Oasis montaj, DIVA-GIS, Esri, MapInfo, Autodesk, BatchGeo, Cadcorp, Hexagon, Mapbox, Trimble, and ArcGIS.

The Cumberland County GIS Data Viewer provides the general public with parcel, zoning, hydrology, soils, utilities and topographic data. You can search for a specific address, street name, parcel number (PIN), or by the owner's name.

{{description}}

Bedrock is the solid rock at or below the land surface. Over much of Ireland, the bedrock is covered by materials such as soil and gravel. The Bedrock map shows what the land surface of Ireland would be made up of if these materials were removed. As the bedrock is commonly covered, bedrock maps are an interpretation of the available data. Geologists map and record information on the composition and structure of rock outcrops (rock which can be seen on the land surface) and boreholes (a deep narrow round hole drilled in the ground). Areas are drawn on a map to show the distribution of rocks. To produce this dataset, the Geological Survey Ireland (GSI) bedrock geology 1:100,000 maps were generalised. The Northern Irish data was generalised using the Geological Survey of Northern Ireland (GSNI) 1:250,000 bedrock geology map.This map is to the scale 1:500,000. This means it should be viewed at that scale. When printed at that scale 1cm on the map relates to a distance of 5km.It is a vector dataset. Vector data portray the world using points, lines, and polygons (areas).The bedrock data is shown as polygons. Each polygon holds information on the rock unit name, age and there is a link to download a pdf of the age description.The faults show the details of the structural geology. Faults are the result of great pressure being applied to rock across a whole continent or more. These rocks will break under the pressure, forming faults. Faults are recorded as lines where the break in the rock meets the surface. To produce this dataset, the Geological Survey Ireland (GSI) bedrock geology 1:100,000 faults were generalised. The Northern Irish data was generalised using the Geological Survey of Northern Ireland (GSNI) 1:250,000 bedrock geology faults map.This map is to the scale 1:500,000. This means it should be viewed at that scale. When printed at that scale 1cm on the map relates to a distance of 5km.It is a vector dataset. Vector data portray the world using points, lines, and polygons (areas).The faults data is shown as black lines. Each line holds information on the fault name if one exists.The dykes show the details of the structural geology. A dyke is a flat body of rock that cuts through another type of rock. Dykes cut across the other type of rock at a different angle than the rest of the structure. Dykes are usually visible because they are at a different angle, and usually have different color and texture than the rock surrounding them.To produce this dataset, the Geological Survey Ireland (GSI) bedrock geology 1:100,000 dykes were generalised. The Northern Irish data was generalised using the Geological Survey of Northern Ireland (GSNI) 1:250,000 bedrock geology faults map.This map is to the scale 1:500,000. This means it should be viewed at that scale. When printed at that scale 1cm on the map relates to a distance of 5km.It is a vector dataset. Vector data portray the world using points, lines, and polygons (areas).The dykes data is shown as red lines.

“Aggregates” is the term geologists use to describe rocks used for building and construction purposes. Aggregate Potential Mapping aims to identify areas where aggregate is most likely to be found.It is a vector dataset. Vector data portray the world using points, lines, and polygons (areas). The data is shown as points and polygonsPlease read the metadata lineage for each layer for further information.

The Digital Geologic-GIS Map of San Miguel Island, California is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (smis_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (smis_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (smis_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) this file (chis_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (chis_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (smis_geology_metadata_faq.pdf). Please read the chis_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: https://www.google.com/earth/versions/. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: American Association of Petroleum Geologists. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (smis_geology_metadata.txt or smis_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:24,000 and United States National Map Accuracy Standards features are within (horizontally) 12.2 meters or 40 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

This data set consists of 6 classes of zoning features: zoning districts, special purpose districts, special purpose district subdistricts, limited height districts, commercial overlay districts, and zoning map amendments.

All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

Internal view of the parcel layer. This view contains all the attributes that can be seen by County employees.There are approximately 51,300 real property parcels in Napa County. Parcels delineate the approximate boundaries of property ownership as described in Napa County deeds, filed maps, and other source documents. GIS parcel boundaries are maintained by the Information Technology Services GIS team. Assessor Parcel Maps are created and maintained by the Assessor Division Mapping Section. Each parcel has an Assessor Parcel Number (APN) that is its unique identifier. The APN is the link to various Napa County databases containing information such as owner name, situs address, property value, land use, zoning, flood data, and other related information. Data for this map service is sourced from the Napa County Parcels dataset which is updated nightly with any recent changes made by the mapping team. There may at times be a delay between when a document is recorded and when the new parcel boundary configuration and corresponding information is available in the online GIS parcel viewer.From 1850 to early 1900s assessor staff wrote the name of the property owner and the property value on map pages. They began using larger maps, called “tank maps” because of the large steel cabinet they were kept in, organized by school district (before unification) on which names and values were written. In the 1920s, the assessor kept large books of maps by road district on which names were written. In the 1950s, most county assessors contracted with the State Board of Equalization for board staff to draw standardized 11x17 inch maps following the provisions of Assessor Handbook 215. Maps were originally drawn on linen. By the 1980’s Assessor maps were being drawn on mylar rather than linen. In the early 1990s Napa County transitioned from drawing on mylar to creating maps in AutoCAD. When GIS arrived in Napa County in the mid-1990s, the AutoCAD images were copied over into the GIS parcel layer. Sidwell, an independent consultant, was then contracted by the Assessor’s Office to convert these APN files into the current seamless ArcGIS parcel fabric for the entire County. Beginning with the 2024-2025 assessment roll, the maps are being drawn directly in the parcel fabric layer.Parcels in the GIS parcel fabric are drawn according to the legal description using coordinate geometry (COGO) drawing tools and various reference data such as Public Lands Survey section boundaries and road centerlines. The legal descriptions are not defined by the GIS parcel fabric. Any changes made in the GIS parcel fabric via official records, filed maps, and other source documents are uploaded overnight. There is always at least a 6-month delay between when a document is recorded and when the new parcel configuration and corresponding information is available in the online parcel viewer for search or download.Parcel boundary accuracy can vary significantly, with errors ranging from a few feet to several hundred feet. These distortions are caused by several factors such as: the map projection - the error derived when a spherical coordinate system model is projected into a planar coordinate system using the local projected coordinate system; and the ground to grid conversion - the distortion between ground survey measurements and the virtual grid measurements. The aim of the parcel fabric is to construct a visual interpretation that is adequate for basic geographic understanding. This digital data is intended for illustration and demonstration purposes only and is not considered a legal resource, nor legally authoritative.SFAP & CFAP DISCLAIMER: Per the California Code, RTC 606. some legal parcels may have been combined for assessment purposes (CFAP) or separated for assessment purposes (SFAP) into multiple parcels for a variety of tax assessment reasons. SFAP and CFAP parcels are assigned their own APN number and primarily result from a parcel being split by a tax rate area boundary, due to a recorded land use lease, or by request of the property owner. Assessor parcel (APN) maps reflect when parcels have been separated or combined for assessment purposes, and are one legal entity. The goal of the GIS parcel fabric data is to distinguish the SFAP and CFAP parcel configurations from the legal configurations, to convey the legal parcel configurations. This workflow is in progress. Please be advised that while we endeavor to restore SFAP and CFAP parcels back to their legal configurations in the primary parcel fabric layer, SFAP and CFAP parcels may be distributed throughout the dataset. Parcels that have been restored to their legal configurations, do not reflect the SFAP or CFAP parcel configurations that correspond to the current property tax delineations. We intend for parcel reports and parcel data to capture when a parcel has been separated or combined for assessment purposes, however in some cases, information may not be available in GIS for the SFAP/CFAP status of a parcel configuration shown. For help or questions regarding a parcel’s SFAP/CFAP status, or property survey data, please visit Napa County’s Surveying Services or Property Mapping Information. For more information you can visit our website: When a Parcel is Not a Parcel | Napa County, CA

The Eel River CZO operates on several spatial scales from a zero order hillslope to the entire Eel River on the north coast of California. Rivendell, Angelo, Sagehorn, South Fork, and Eel River GIS boundaries. GIS polygon shapefiles. All files are in geographic projection (Lat/Long) with a datum of WGS84.

The watershed boundaries are from USGS Watershed Boundary Dataset (WBD) http://nhd.usgs.gov/wbd.html. Rivendell and Angelo boundaries are created from LiDAR by the CZO. Sagehorn Ranch is a privately held, active commercial ranch with no public access. Please contact the CZO if you are interested in data from Sagehorn Ranch.

Shapefiles

Eel River Watershed (drainage area 9534 km^2): Entire eel river. Greatest extent of CZO research.

South Fork Eel Watershed (drainage area 1784 km^2).

Angelo Reserve Boundary (30.0 km^2): Angelo Coast Range Reserve is a University of California Natural Reserve System protected land. It is the central focus of CZO research. http://angelo.berkeley.edu

Sagehorn Ranch Boundary (21.1 km^2): Sagehorn Ranch is a private ranch with active cattle raising. The owners have allowed the CZO to place instrumentation on their lands. Access is only by explicit agreement by owners.

Rivendell Cachement (0.0076 km^2): Rivendell is a small, heavily instrumented hillslope within the Angelo Reserve. It has roughly 700 instruments deployed as of 2016. Data is online at http://sensor.berkeley.edu

Please click here to view the Data Dictionary, a description of the fields in this table.

This feature layer provides digital tax parcels for the Organized Towns of the State of Maine. Within Maine, real property data is maintained by the government organization responsible for assessing and collecting property tax for a given location. Organized towns and townships maintain authoritative data for their communities and may voluntarily submit these data to the Maine GeoLibrary Parcel Project. "Maine Parcels Organized Towns Feature" and "Maine Parcels Organized Towns ADB" are the product of these voluntary submissions. Communities provide updates to the Maine GeoLibrary on a non-regular basis, which affects the currency of Maine GeoLibrary parcels data. Another resource for real property transaction data is the County Registry of Deeds, although organized town data should very closely match registry information, except in the case of in-process property conveyance transactions. In Unorganized Territories (defined as those regions of the state without a local government that assesses real property and collects property tax), the Maine Revenue Service is the authoritative source for parcel data. "Maine Parcels Unorganized Territory Feature" is the authoritative GIS data layer for the Unorganized Territories. However, it must always be used with auxiliary data obtained from the online resources of Maine Revenue Services (https://www.maine.gov/revenue/taxes/property-tax) to compile up-to-date parcel ownership information. Property maps are a fundamental base for many municipal activities. Although GIS parcel data cannot replace detailed ground surveys, the data can assist municipal officials with functions such as accurate property tax assessment, planning and zoning. Towns can link maps to an assessor's database and display local information, while town officials can show taxpayers how proposed development or changes in municipal services and regulations may affect the community. In many towns, parcel data also helps to provide public notices, plan bus routes, and carry out other municipal services.

This dataset contains municipality-submitted parcel data along with previously developed parcel data acquired through the Municipal Grants Project supported by the Maine Library of Geographic Information (Maine GeoLibrary). Grant recipient parcel data submissions were guided by standards presented to the Maine GeoLibrary Board on May 21, 2005, which are outlined in the "Standards for Digital Parcel Files" document available on the Maine GeoLibrary publications page (https://www.maine.gov/geolib/policies/standards.html). This dataset also contains municipal parcel data acquired through other sources; the data sources are identified (where available) by the field “FMSCORG”. Note: Join this feature layer with the "Maine Parcels Organized Towns ADB" table (https://maine.hub.arcgis.com/maps/maine::maine-parcels-organized-towns-feature/about?layer=1) for available ownership information. A date field, “FMUPDAT”, is attributed with the most recent update date for each individual parcel if available. The "FMUPDAT" field will not match the "Updated" value shown for the layer. "FMUPDAT" corresponds with the date of update for the individual data, while "Updated" corresponds with the date of update for the ArcGIS Online layer as a whole. Many parcels have not been updated in several years; use the "FMUPDAT" field to verify currency.

Board of Review District based on 2010 census.