Contains information that defines the Federal lease blocks for the GOM OCS Region. Browse-Graphic

Metadata

Within the Gulf of Mexico, there are two types of maps that depict blocks that could be leased. An older format, known as the Leasing Map, was based on Texas or Louisiana State Plane mapping projections. Leasing Maps were created as oil/gas leasing expanded offshore of Texas and Louisiana. Eventually the Leasing Maps were projected so far offshore that negative coordinates were required to support the projection. This has created a wide variety of Leasing Maps in projection, shape and overall size, but the blocks remained consistent, and are never larger than the 5760 acres. Because the Leasing Maps reflect so many active leases, they are still being maintained. However, in areas further offshore where Leasing Maps have never been generated, the Official Protraction Diagram (OPD) is used. A standard OPD is 1 degree in latitude by 2 degrees in longitude (at lower latitudes: 0 - 48 degrees) as in the Gulf of Mexico. At higher latitudes (48 - 75 degrees) such as Alaska and northern Washington, OPDs are 3 degrees wide. OPD limits usually approximate the standard 1:250,000 scale U.S. Geological Survey topographic map series. The OPDs are numbered using the United Nations International Map of the World Numbering System. OPD names usually coincide with standard topographic sheet names when diagrams include land areas. OPD sheet names relate to land features, or to hydrographic features contained within the limits of the diagram. Shoreline planimetric detail is shown when it falls within the limits of a diagram. Older OPDs were prepared on mylar with manual cartographic methods and then scanned into Adobe .pdf files. Newer OPDs were prepared electronically and converted to Adobe .pdf files. Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: https://www.boem.gov/uploadedFiles/BOEM/Oil_and_Gas_Energy_Program/Mapping_and_Data/99-0006.pdf Also see the metadata for each of the individual GIS files used to create these OPDs. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.

This data set contains Supplemental Official OCS Block Diagram (SOBD) images in Adobe pdf format for areas within the BOEM Gulf of Mexico Region. Each SOBD describes a single block within an Official Protraction Diagram (OPD) or Leasing Map (LM) and shows the lines (Submerged Lands Act, Limit of '8(g) Zone', maritime boundaries and/or marine sanctuaries) which occur within that block and divide it into different areas. The SOBD contains additional coordinates and area calculations for an individual block. These data are scanned images of the official paper SOBD's produced by the BOEM. Note that not all OPDs have boundaries cutting through them, so not all OPDs will have SOBDs generated for them. All current leasing activities will be done using the most current SOBDs. Historical (outdated) SOBDs can be obtained by contacting the Geospatial Services Division. Also see the metadata for each of the individual GIS files used to create these SOBDs. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions. Further information on the historic development of OPD's can be found in OCS Report BOEM 99-0006: Boundary Development on the Outer Continental Shelf: https://www.boem.gov/uploadedFiles/BOEM/Oil_and_Gas_Energy_Program/Mapping_and_Data/99-0006.pdf

This file is based on the Mapping and Boundary Branch's Official Protraction Diagram (OPD)and Leasing Maps (LM). Each offshore area is defined by an API Number corresponding to those in the API Bulletin Number D12A. OPDs are numbered using the United Nations International Map of the World Numbering System, and are generally named for land or hydrographic features contained within the limits of the diagram. This data set contains Official Protraction Diagram (OPD) and Leasing Map (LM) outlines in ESRI shape file formats for the BOEM Gulf of Mexico Region. The use of OPDs and LMs makes it easier to refer to individual blocks within a region or planning area. These diagrams were clipped along the Submerged Lands Act (SLA) boundary and along lines contained in the Continental Shelf Boundaries (CSB) GIS data files to show only those blocks or portions thereof within federal jurisdiction. Because GIS projection and topology functions can change or generalize coordinates, these GIS files are NOT an OFFICIAL record for the exact OPD boundaries. Only the paper OPD or a digital image of them serves as OFFICIAL records.Official Protraction Diagrams and other cadastre information the BOEM produces are generated in accordance with 30 Code of Federal Regulations (CFR) Part 556.8 Subpart A, (formerly Part 256.8 Subpart A (2010)) to support Federal land ownership and mineral resource management. Further information on the SLA and development of this line from baseline points can be found in OCS Report BOEM 99-0006: Boundary Development on the Outer Continental Shelf. https://www.boem.gov/BOEM-Newsroom/Library/Publications/1999/99-0006-pdf.aspx Because GIS projection and topology functions can change or generalize coordinates, and because shapefiles cannot represent true arcs, these GIS files are considered to be approximate and are NOT an OFFICIAL record for the exact block coordinates or areas. The Official Protraction Diagrams (OPDs)and Leasing Maps (LMs) and Supplemental Official Block Diagrams (SOBDs) serve as the legal definition for BOEM offshore boundary coordinates and area descriptions and can be found at the following location: https://www.boem.gov/Official-Protraction-Diagrams/. Contains the protraction polygons clipped on the fedstate (SLA-Boundary) as of March 15, 2013. Used ArcCatalog to create shape files.

This file is based on the BOEM - Geospatial Services Divisionâs Official Protraction Diagram (OPD) and Leasing Maps (LM). The OPDs and LMs and Supplemental Official Block Diagrams (SOBDs) serve as the legal definition for BOEM offshore boundary coordinates and area descriptions. OPDs are numbered using the United Nations International Map of the World Numbering System, and are generally named for land or hydrographic features contained within the limits of the diagram. The use of OPDs and LMs makes it easier to refer to individual blocks within a region or planning area. Leasing Maps are part of an older system still in use in the Gulf of Mexico. OPDs were built where existing oil and gas leases, at the time, had not yet occurred and where LMs had not yet been established. This data set contains Official Protraction Diagram (OPD) and Leasing Map (LM) outlines in ESRI shape file formats for the BOEM Gulf of Mexico Region. In order to produce a file containing all the OPDs in a region â Official UTM OPDs and State Plane projected LM outlines were re-projected to basic geographic NAD27 unprojected space in order to create a continuous file. Because GIS projection and topology functions can change or generalize coordinates, these GIS files are NOT an OFFICIAL record for the exact OPD or LM boundaries. Only the official projected paper OPD or LM or a digital image (pdf) of them serves as OFFICIAL records. These can be found at the following location: https://www.boem.gov/Official-Protraction-Diagrams.

This dataset is a compilation of available oil and gas pipeline data and is maintained by BSEE. Pipelines are used to transport and monitor oil and/or gas from wells within the outer continental shelf (OCS) to resource collection locations. Currently, pipelines managed by BSEE are found in Gulf of Mexico and southern California waters.

© MarineCadastre.gov This layer is a component of BOEMRE Layers.

This Map Service contains many of the primary data types created by both the Bureau of Ocean Energy Management (BOEM) and the Bureau of Safety and Environmental Enforcement (BSEE) within the Department of Interior (DOI) for the purpose of managing offshore federal real estate leases for oil, gas, minerals, renewable energy, sand and gravel. These data layers are being made available as REST mapping services for the purpose of web viewing and map overlay viewing in GIS systems. Due to re-projection issues which occur when converting multiple UTM zone data to a single national or regional projected space, and line type changes that occur when converting from UTM to geographic projections, these data layers should not be used for official or legal purposes. Only the original data found within BOEM/BSEE’s official internal database, federal register notices or official paper or pdf map products may be considered as the official information or mapping products used by BOEM or BSEE. A variety of data layers are represented within this REST service are described further below. These and other cadastre information the BOEM and BSEE produces are generated in accordance with 30 Code of Federal Regulations (CFR) 256.8 to support Federal land ownership and mineral resource management.

For more information – Contact: Branch Chief, Mapping and Boundary Branch, BOEM, 381 Elden Street, Herndon, VA 20170. Telephone (703) 787-1312; Email: mapping.boundary.branch@boem.gov

The REST services for National Level Data can be found here: http://gis.boemre.gov/arcgis/rest/services/BOEM_BSEE/MMC_Layers/MapServer

REST services for regional level data can be found by clicking on the region of interest from the following URL: http://gis.boemre.gov/arcgis/rest/services/BOEM_BSEE

Individual Regional Data or in depth metadata for download can be obtained in ESRI Shape file format by clicking on the region of interest from the following URL: http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx

Currently the following layers are available from this REST location:

OCS Drilling Platforms -Locations of structures at and beneath the water surface used for the purpose of exploration and resource extraction. Only platforms in federal Outer Continental Shelf (OCS) waters are included. A database of platforms and rigs is maintained by BSEE.

OCS Oil and Natural Gas Wells -Existing wells drilled for exploration or extraction of oil and/or gas products. Additional information includes the lease number, well name, spud date, the well class, surface area/block number, and statistics on well status summary. Only wells found in federal Outer Continental Shelf (OCS) waters are included. Wells information is updated daily. Additional files are available on well completions and well tests. A database of wells is maintained by BSEE.

OCS Oil & Gas Pipelines -This dataset is a compilation of available oil and gas pipeline data and is maintained by BSEE. Pipelines are used to transport and monitor oil and/or gas from wells within the outer continental shelf (OCS) to resource collection locations. Currently, pipelines managed by BSEE are found in Gulf of Mexico and southern California waters.

Unofficial State Lateral Boundaries - The approximate location of the boundary between two states seaward of the coastline and terminating at the Submerged Lands Act Boundary. Because most State boundary locations have not been officially described beyond the coast, are disputed between states or in some cases the coastal land boundary description is not available, these lines serve as an approximation that was used to determine a starting point for creation of BOEM’s OCS Administrative Boundaries. GIS files are not available for this layer due to its unofficial status.

BOEM OCS Administrative Boundaries - Outer Continental Shelf (OCS) Administrative Boundaries Extending from the Submerged Lands Act Boundary seaward to the Limit of the United States OCS (The U.S. 200 nautical mile Limit, or other marine boundary)For additional details please see the January 3, 2006 Federal Register Notice.

BOEM Limit of OCSLA ‘8(g)’ zone - The Outer Continental Shelf Lands Act '8(g) Zone' lies between the Submerged Lands Act (SLA) boundary line and a line projected 3 nautical miles seaward of the SLA boundary line. Within this zone, oil and gas revenues are shared with the coastal state(s). The official version of the ‘8(g)’ Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction described below.

Submerged Lands Act Boundary - The SLA boundary defines the seaward limit of a state's submerged lands and the landward boundary of federally managed OCS lands. The official version of the SLA Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction Diagrams described below.

Atlantic Wildlife Survey Tracklines(2005-2012) - These data depict tracklines of wildlife surveys conducted in the Mid-Atlantic region since 2005. The tracklines are comprised of aerial and shipboard surveys. These data are intended to be used as a working compendium to inform the diverse number of groups that conduct surveys in the Mid-Atlantic region.The tracklines as depicted in this dataset have been derived from source tracklines and transects. The tracklines have been simplified (modified from their original form) due to the large size of the Mid-Atlantic region and the limited ability to map all areas simultaneously.The tracklines are to be used as a general reference and should not be considered definitive or authoritative. This data can be downloaded from http://www.boem.gov/uploadedFiles/BOEM/Renewable_Energy_Program/Mapping_and_Data/ATL_WILDLIFE_SURVEYS.zip

BOEM OCS Protraction Diagrams & Leasing Maps - This data set contains a national scale spatial footprint of the outer boundaries of the Bureau of Ocean Energy Management’s (BOEM’s) Official Protraction Diagrams (OPDs) and Leasing Maps (LMs). It is updated as needed. OPDs and LMs are mapping products produced and used by the BOEM to delimit areas available for potential offshore mineral leases, determine the State/Federal offshore boundaries, and determine the limits of revenue sharing and other boundaries to be considered for leasing offshore waters. This dataset shows only the outline of the maps that are available from BOEM.Only the most recently published paper or pdf versions of the OPDs or LMs should be used for official or legal purposes. The pdf maps can be found by going to the following link and selecting the appropriate region of interest. http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx Both OPDs and LMs are further subdivided into individual Outer Continental Shelf(OCS) blocks which are available as a separate layer. Some OCS blocks that also contain other boundary information are known as Supplemental Official Block Diagrams (SOBDs.) Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: http://www.boemre.gov/itd/pubs/1999/99-0006.PDF Also see the metadata for each of the individual GIS data layers available for download. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.

BOEM OCS Lease Blocks - Outer Continental Shelf (OCS) lease blocks serve as the legal definition for BOEM offshore boundary coordinates used to define small geographic areas within an Official Protraction Diagram (OPD) for leasing and administrative purposes. OCS blocks relate back to individual Official Protraction Diagrams and are not uniquely numbered. Only the most recently published paper or pdf

This data set contains BOEM Planning Area outlines in ESRI shapefile format for the BOEM Gulf of Mexico Region. The old Gulf of Mexico Planning Area outlines were changed as of 2008. The divisions between these new Planning Areas for the Eastern, Central, and Western Gulf of Mexico are based on the OCS Administrative Boundaries between TX and LA and FL and AL. Except for a portion of the line between the Eastern and Central Planning Area the boundaries follow the block grid, depending on whether the block is mostly on one side of the Administrative Boundary, or the other. Legal definitions for all the OCS BOEM Planning Areas may be found at the following site: https://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspxThe Straits of Florida Planning Area (Atlantic Region) is essentially unchanged. The Submerged Lands Act (Fed/State) boundary, along with the Continental Shelf Boundary (CSB), the Limit of Protraction, and the boundary between the Atlantic and Gulf of Mexico Regions were used to complete the polygons for the Planning Areas. Because GIS projection and topology functions can change or generalize coordinates, and because shapefiles cannot represent true arcs, these GIS files are considered to be approximate and are NOT an OFFICIAL record for the exact block coordinates or areas. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs) serve as the legal definition for BOEM offshore boundary coordinates and area descriptions. If any discrepancies are found between these feature classes and the OPDs and SOBDs, it is the OPD and SOBD diagrams which take precedence. Also note that the BOEM cadastre is developed on a UTM projection, and most Planning Areas span multiple UTM ZONES. This means that area values computed from these shapefiles will not match the official BOEM areas.

This Map Service contains many of the primary data types created by both the Bureau of Ocean Energy Management (BOEM) and the Bureau of Safety and Environmental Enforcement (BSEE) within the Department of Interior (DOI) for the purpose of managing offshore federal real estate leases for oil, gas, minerals, renewable energy, sand and gravel. These data layers are being made available as REST mapping services for the purpose of web viewing and map overlay viewing in GIS systems. Due to re-projection issues which occur when converting multiple UTM zone data to a single national or regional projected space, and line type changes that occur when converting from UTM to geographic projections, these data layers should not be used for official or legal purposes. Only the original data found within BOEM/BSEE’s official internal database, federal register notices or official paper or pdf map products may be considered as the official information or mapping products used by BOEM or BSEE. A variety of data layers are represented within this REST service are described further below. These and other cadastre information the BOEM and BSEE produces are generated in accordance with 30 Code of Federal Regulations (CFR) 256.8 to support Federal land ownership and mineral resource management.For more information – Contact: Branch Chief, Mapping and Boundary Branch, BOEM, 381 Elden Street, Herndon, VA 20170. Telephone (703) 787-1312; Email: mapping.boundary.branch@boem.govThe REST services for National Level Data can be found here: https://gis.boem.gov/arcgis/rest/services/BOEM_BSEE/MMC_Layers/MapServerREST services for regional level data can be found by clicking on the region of interest from the following URL: https://gis.boem.gov/arcgis/rest/services/BOEM_BSEEIndividual Regional Data or in depth metadata for download can be obtained in ESRI Shape file format by clicking on the region of interest from the following URL: https://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspxCurrently the following layers are available from this REST location:OCS Drilling Platforms -Locations of structures at and beneath the water surface used for the purpose of exploration and resource extraction. Only platforms in federal Outer Continental Shelf (OCS) waters are included. A database of platforms and rigs is maintained by BSEE.OCS Oil and Natural Gas Wells -Existing wells drilled for exploration or extraction of oil and/or gas products. Additional information includes the lease number, well name, spud date, the well class, surface area/block number, and statistics on well status summary. Only wells found in federal Outer Continental Shelf (OCS) waters are included. Wells information is updated daily. Additional files are available on well completions and well tests. A database of wells is maintained by BSEE.OCS Oil and Gas Pipelines -This dataset is a compilation of available oil and gas pipeline data and is maintained by BSEE. Pipelines are used to transport and monitor oil and/or gas from wells within the outer continental shelf (OCS) to resource collection locations. Currently, pipelines managed by BSEE are found in Gulf of Mexico and southern California waters. BOEM Limit of OCSLA ‘8(g)’ zone - The Outer Continental Shelf Lands Act '8(g) Zone' lies between the Submerged Lands Act (SLA) boundary line and a line projected 3 nautical miles seaward of the SLA boundary line. Within this zone, oil and gas revenues are shared with the coastal state(s). The official version of the ‘8(g)’ Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction described below.Submerged Lands Act Boundary - The SLA boundary defines the seaward limit of a state's submerged lands and the landward boundary of federally managed OCS lands. The official version of the SLA Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction Diagrams described below.BOEM OCS Protraction Diagrams & Leasing Maps - This data set contains a national scale spatial footprint of the outer boundaries of the Bureau of Ocean Energy Management’s (BOEM’s) Official Protraction Diagrams (OPDs) and Leasing Maps (LMs). It is updated as needed. OPDs and LMs are mapping products produced and used by the BOEM to delimit areas available for potential offshore mineral leases, determine the State/Federal offshore boundaries, and determine the limits of revenue sharing and other boundaries to be considered for leasing offshore waters. This dataset shows only the outline of the maps that are available from BOEM.Only the most recently published paper or pdf versions of the OPDs or LMs should be used for official or legal purposes. The pdf maps can be found by going to the following link and selecting the appropriate region of interest. https://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx Both OPDs and LMs are further subdivided into individual Outer Continental Shelf(OCS) blocks which are available as a separate layer. Some OCS blocks that also contain other boundary information are known as Supplemental Official Block Diagrams (SOBDs.) Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: https://www.boemre.gov/itd/pubs/1999/99-0006.PDF Also see the metadata for each of the individual GIS data layers available for download. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.BOEM OCS Lease Blocks - Outer Continental Shelf (OCS) lease blocks serve as the legal definition for BOEM offshore boundary coordinates used to define small geographic areas within an Official Protraction Diagram (OPD) for leasing and administrative purposes. OCS blocks relate back to individual Official Protraction Diagrams and are not uniquely numbered. Only the most recently published paper or pdf versions of the OPDs or LMs or SOBDs should be used for official or legal purposes. The pdf maps can be found by going to the following link and selecting the appropriate region of interest within the OPD/SOBD table.https://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspxBOEM Oil and Gas Leases – Blocks that are currently leased from the federal government by industry for the purpose of development of traditional oil or gas energy products and may or may not be actively developed or producing. Leases in state waters are not included in this layer.BOEM Oil and Gas Planning Areas - Planning areas are used to support the 5-Year Oil and Gas Program consisting of a schedule of oil and gas lease sales indicating the size, timing and location of proposed leasing activity the Secretary of Interior determines will best meet national energy needs for the five year period following its approval. An area must be included in the current 5-Year Program in order to be offered for leasing. Section 18 of the OCS Lands Act prescribes the major steps involved in developing a 5-Year Program including extensive public comment steps. A 5-Year Program balances energy needs and environmental considerations in accordance with 30 Code of Federal Regulations (CFR) 256.8 to support Federal land ownership and mineral resource management.Seismic Water Bottom Anomalies 230,000 sq km of seismic data interpretation mapping over 32,000 seafloor seismic amplitude anomalies in the Gulf of Mexico using 3-D time-migrated seismic surveys. This mapping program means to understand the distribution of natural hydrocarbon seeps and the related benthic fauna, and to characterize other seafloor features related to the geological framework of the seafloor. These areas show anomalously high or low amplitude response over the background response. Four classes of water bottom anomalies interpreted to be caused by hydrocarbon seepage include High-Positive, Low-Positive/Negative, Pockmarks and Water-Column Gas Plumes. Six classes of water bottom anomalies that are non-seep related include Cretaceous, Cretaceous Talus, Fan, Salt, Slump, and Channels. Please visit https://www.boem.gov/Seismic-Water-Bottom-Anomalies-Map-Gallery/ for more information on these anomaly types.Marine Minerals Significant Sand Resource Blocks - This data set contains OCS block outlines and delineated polygons in ESRI ArcGIS shape file format for the BOEM Gulf of Mexico Region that contain sediment resources and areas of disposal in support of the Marine Minerals Program. Coastal restoration, beach nourishment, and levee reconstruction are crucial to mitigate future coastal erosion, land loss, flooding, and storm damage in the Gulf of Mexico. The success of that long-term effort depends on locating and securing significant quantities of OCS sediment resources that are compatible with the target environments being restored. Offshore sand resources, like upland sources, are extremely scarce where most needed. Additionally, vast areas of these relatively small offshore sand resources are not extractable because of the presence of oil and gas infrastructure, archaeologically sensitive areas, and biologically sensitive areas. Since the use of OCS sediment resources is authorized by the BOEM through its Marine Mineral Program, the bureau is implementing several measures to help safeguard the most significant OCS sediment resources, reduce multiple use conflicts, and minimize interference with oil and gas operations under existing leases or rights-of-way.

Outer Continental Shelf (OCS) lease blocks serve as the legal definition for US Department of Energy's Bureau of Ocean and Energy Management (BOEM) offshore boundary coordinates used to define small geographic areas within an Official Protraction Diagram (OPD) for leasing and administrative purposes. OCS blocks relate back to individual Official Protraction Diagrams and are not uniquely numbered. Only the most recently published paper or pdf versions of the Official Protraction Diagrams or Lease Maps or Supplemental Official OCS Block Diagrams (SOBD) should be used for official or legal purposes. The pdf maps can be found by going to the here and selecting the appropriate region of interest within the OPD/SOBD table. Outer Continental Shelf (OCS) Lease Blocks are subdivisions of US submerged lands, subsoil, and seabed generally beginning 3 nautical miles off the coastline (for most States) and extending to the edge of the Exclusive Economic Zone (EEZ) or even farther where the Continental Shelf Boundary extends beyond 200 nautical miles. Some OCS Lease Blocks may be leased by private entities for oil and/or gas mining rights. Dataset SummaryThe source data for this layer is from the BOEM website and is updated regularly. The features in this polygon layer contain attributes to describe each lease block. Polygons are clipped to the Planning Area Boundaries in ArcGIS shape file format for the BOEM Gulf of Mexico Region. OCS blocks are used to define small geographic areas within an Official Protraction Diagram (OPD) for leasing and administrative purposes. These blocks have been clipped along the Submerged Lands Act (SLA) boundary and along the Continental Shelf Boundaries. The BOEM cautions that the location of these features is to be considered approximate and are not an official record for the exact baseline coordinateLink to source metadataWhat can you do with this layer?This layer is a feature service, which means it can be used for visualization and analysis throughout the ArcGIS Platform. This layer is not editable.

Locations of structures at and beneath the water surface used for the purpose of exploration and resource extraction. Only platforms in federal Outer Continental Shelf (OCS) waters are included. A database of platforms and rigs is maintained by BSEE.

© MarineCadastre.gov This layer is a component of BOEMRE Layers.

This Map Service contains many of the primary data types created by both the Bureau of Ocean Energy Management (BOEM) and the Bureau of Safety and Environmental Enforcement (BSEE) within the Department of Interior (DOI) for the purpose of managing offshore federal real estate leases for oil, gas, minerals, renewable energy, sand and gravel. These data layers are being made available as REST mapping services for the purpose of web viewing and map overlay viewing in GIS systems. Due to re-projection issues which occur when converting multiple UTM zone data to a single national or regional projected space, and line type changes that occur when converting from UTM to geographic projections, these data layers should not be used for official or legal purposes. Only the original data found within BOEM/BSEE’s official internal database, federal register notices or official paper or pdf map products may be considered as the official information or mapping products used by BOEM or BSEE. A variety of data layers are represented within this REST service are described further below. These and other cadastre information the BOEM and BSEE produces are generated in accordance with 30 Code of Federal Regulations (CFR) 256.8 to support Federal land ownership and mineral resource management.

For more information – Contact: Branch Chief, Mapping and Boundary Branch, BOEM, 381 Elden Street, Herndon, VA 20170. Telephone (703) 787-1312; Email: mapping.boundary.branch@boem.gov

The REST services for National Level Data can be found here: http://gis.boemre.gov/arcgis/rest/services/BOEM_BSEE/MMC_Layers/MapServer

REST services for regional level data can be found by clicking on the region of interest from the following URL: http://gis.boemre.gov/arcgis/rest/services/BOEM_BSEE

Individual Regional Data or in depth metadata for download can be obtained in ESRI Shape file format by clicking on the region of interest from the following URL: http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx

Currently the following layers are available from this REST location:

OCS Drilling Platforms -Locations of structures at and beneath the water surface used for the purpose of exploration and resource extraction. Only platforms in federal Outer Continental Shelf (OCS) waters are included. A database of platforms and rigs is maintained by BSEE.

OCS Oil and Natural Gas Wells -Existing wells drilled for exploration or extraction of oil and/or gas products. Additional information includes the lease number, well name, spud date, the well class, surface area/block number, and statistics on well status summary. Only wells found in federal Outer Continental Shelf (OCS) waters are included. Wells information is updated daily. Additional files are available on well completions and well tests. A database of wells is maintained by BSEE.

OCS Oil & Gas Pipelines -This dataset is a compilation of available oil and gas pipeline data and is maintained by BSEE. Pipelines are used to transport and monitor oil and/or gas from wells within the outer continental shelf (OCS) to resource collection locations. Currently, pipelines managed by BSEE are found in Gulf of Mexico and southern California waters.

Unofficial State Lateral Boundaries - The approximate location of the boundary between two states seaward of the coastline and terminating at the Submerged Lands Act Boundary. Because most State boundary locations have not been officially described beyond the coast, are disputed between states or in some cases the coastal land boundary description is not available, these lines serve as an approximation that was used to determine a starting point for creation of BOEM’s OCS Administrative Boundaries. GIS files are not available for this layer due to its unofficial status.

BOEM OCS Administrative Boundaries - Outer Continental Shelf (OCS) Administrative Boundaries Extending from the Submerged Lands Act Boundary seaward to the Limit of the United States OCS (The U.S. 200 nautical mile Limit, or other marine boundary)For additional details please see the January 3, 2006 Federal Register Notice.

BOEM Limit of OCSLA ‘8(g)’ zone - The Outer Continental Shelf Lands Act '8(g) Zone' lies between the Submerged Lands Act (SLA) boundary line and a line projected 3 nautical miles seaward of the SLA boundary line. Within this zone, oil and gas revenues are shared with the coastal state(s). The official version of the ‘8(g)’ Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction described below.

Submerged Lands Act Boundary - The SLA boundary defines the seaward limit of a state's submerged lands and the landward boundary of federally managed OCS lands. The official version of the SLA Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction Diagrams described below.

Atlantic Wildlife Survey Tracklines(2005-2012) - These data depict tracklines of wildlife surveys conducted in the Mid-Atlantic region since 2005. The tracklines are comprised of aerial and shipboard surveys. These data are intended to be used as a working compendium to inform the diverse number of groups that conduct surveys in the Mid-Atlantic region.The tracklines as depicted in this dataset have been derived from source tracklines and transects. The tracklines have been simplified (modified from their original form) due to the large size of the Mid-Atlantic region and the limited ability to map all areas simultaneously.The tracklines are to be used as a general reference and should not be considered definitive or authoritative. This data can be downloaded from http://www.boem.gov/uploadedFiles/BOEM/Renewable_Energy_Program/Mapping_and_Data/ATL_WILDLIFE_SURVEYS.zip

BOEM OCS Protraction Diagrams & Leasing Maps - This data set contains a national scale spatial footprint of the outer boundaries of the Bureau of Ocean Energy Management’s (BOEM’s) Official Protraction Diagrams (OPDs) and Leasing Maps (LMs). It is updated as needed. OPDs and LMs are mapping products produced and used by the BOEM to delimit areas available for potential offshore mineral leases, determine the State/Federal offshore boundaries, and determine the limits of revenue sharing and other boundaries to be considered for leasing offshore waters. This dataset shows only the outline of the maps that are available from BOEM.Only the most recently published paper or pdf versions of the OPDs or LMs should be used for official or legal purposes. The pdf maps can be found by going to the following link and selecting the appropriate region of interest. http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx Both OPDs and LMs are further subdivided into individual Outer Continental Shelf(OCS) blocks which are available as a separate layer. Some OCS blocks that also contain other boundary information are known as Supplemental Official Block Diagrams (SOBDs.) Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: http://www.boemre.gov/itd/pubs/1999/99-0006.PDF Also see the metadata for each of the individual GIS data layers available for download. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.

BOEM OCS Lease Blocks - Outer Continental Shelf (OCS) lease blocks serve as the legal definition for BOEM offshore boundary coordinates used to define small geographic areas within an Official Protraction Diagram (OPD) for leasing and administrative purposes. OCS blocks relate back to individual Official Protraction Diagrams and are not uniquely numbered. Only the most recently published paper or pdf versions of the OPDs or LMs or SOBDs should be used for official or legal purposes. The pdf

description: This data set contains Continental Shelf Boundary (CSB) lines in ESRI shapefile format for the BOEM Gulf of Mexico Region. The CSB defines the seaward limit of federally managed OCS lands. The line depicts the limit of U.S. jurisdiction for offshore mineral development. This CSB file only includes the lateral boundaries between the United States and Mexico, or Cuba. That portion of the CSB defined by the 200 nautical mile line is not yet included. The BOEM CSB line is similar to, the Exclusive Economic Zone (EEZ) line published by NOAA, but the CSB may have slight differences. For example the CSB line will include intersection points with the BOEM OCS blocks. Additional details are available from OCS Report MMS 99-0006 - Boundary Development on the Outer Continental Shelf: https://www.boem.gov/uploadedFiles/BOEM/Oil_and_Gas_Energy_Program/Mapping_and_Data/99-0006.pdfBecause GIS projection and topology functions can change or generalize coordinates, these GIS files are considered to be approximate and are NOT an OFFICIAL record for the exact baseline coordinates. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs) serve as the legal definition for BOEM offshore boundary coordinates and area descriptions. Contains the continental shelf boundary as of March 15, 2013. Used ArcCatalog to create shape files. Shape files put at imsnolna04lesharedGISPublicInfo. There are currently no web mapping services available for this layer.; abstract: This data set contains Continental Shelf Boundary (CSB) lines in ESRI shapefile format for the BOEM Gulf of Mexico Region. The CSB defines the seaward limit of federally managed OCS lands. The line depicts the limit of U.S. jurisdiction for offshore mineral development. This CSB file only includes the lateral boundaries between the United States and Mexico, or Cuba. That portion of the CSB defined by the 200 nautical mile line is not yet included. The BOEM CSB line is similar to, the Exclusive Economic Zone (EEZ) line published by NOAA, but the CSB may have slight differences. For example the CSB line will include intersection points with the BOEM OCS blocks. Additional details are available from OCS Report MMS 99-0006 - Boundary Development on the Outer Continental Shelf: https://www.boem.gov/uploadedFiles/BOEM/Oil_and_Gas_Energy_Program/Mapping_and_Data/99-0006.pdfBecause GIS projection and topology functions can change or generalize coordinates, these GIS files are considered to be approximate and are NOT an OFFICIAL record for the exact baseline coordinates. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs) serve as the legal definition for BOEM offshore boundary coordinates and area descriptions. Contains the continental shelf boundary as of March 15, 2013. Used ArcCatalog to create shape files. Shape files put at imsnolna04lesharedGISPublicInfo. There are currently no web mapping services available for this layer.

Data set contains the Bureau of Safety and Environmental Enforcement (BSEE) Gulf of Mexico Region (GOMR) Offshore Inspection District Boundaries.The District boundaries are not clipped to the OCS Planning Area boundaries, therefore, the features extend beyond the OCS Planning Area.Official Protraction Diagrams and other cadastre information the BOEM produces are generated in accordance with 30 Code of Federal Regulations (CFR) Part 550.4 Subpart D, (formerly Part 556.8 Subpart A (2015)) to support Federal land ownership and mineral resource management. Additional details are available from: http://www.boem.gov/uploadedFiles/BOEM/Oil_and_Gas_Energy_Program/Mapping_and_Data/99-0006.pdfBecause GIS projection and topology functions can change or generalize coordinates, and because shapefiles cannot represent true arcs, these GIS files are considered to be approximate and are NOT an OFFICIAL record for the exact block coordinates or areas. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs) serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.

description: This data set contains the Limit of '8(g) Zone' line in ESRI shapefile format for the BOEM gulf of Mexico Region. The '8(g) Zone' lies between the Submerged Lands Act (SLA) boundary line and a line projected 3 nautical miles seaward of the SLA boundary line. Within this zone, revenues are shared with the coastal state(s). Further information on the SLA and development of this line from baseline points can be found in OCS Report BOEM 99-0006: Boundary Development on the Outer Continental Shelf. https://www.boem.gov/BOEM-Newsroom/Library/Publications/1999/99-0006-pdf.aspx Because GIS projection and topology functions can change or generalize coordinates, these GIS files are considered to be approximate and are NOT an OFFICIAL record for the exact Submerged Lands Act Boundary. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs) serve as the legal definition for offshore boundary coordinates and area descriptions.Contains the 8g line as of March 15, 2013. Used ArcCatalog to create shape files. Shape files put at imsnolna04lesharedGISPublicInfo.; abstract: This data set contains the Limit of '8(g) Zone' line in ESRI shapefile format for the BOEM gulf of Mexico Region. The '8(g) Zone' lies between the Submerged Lands Act (SLA) boundary line and a line projected 3 nautical miles seaward of the SLA boundary line. Within this zone, revenues are shared with the coastal state(s). Further information on the SLA and development of this line from baseline points can be found in OCS Report BOEM 99-0006: Boundary Development on the Outer Continental Shelf. https://www.boem.gov/BOEM-Newsroom/Library/Publications/1999/99-0006-pdf.aspx Because GIS projection and topology functions can change or generalize coordinates, these GIS files are considered to be approximate and are NOT an OFFICIAL record for the exact Submerged Lands Act Boundary. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs) serve as the legal definition for offshore boundary coordinates and area descriptions.Contains the 8g line as of March 15, 2013. Used ArcCatalog to create shape files. Shape files put at imsnolna04lesharedGISPublicInfo.

Blocks that are currently leased from the federal government by industry for the purpose of development of traditional oil or gas energy products and may or may not be actively developed or producing. Leases in state waters are not included in this layer.

© MarineCadastre.gov This layer is a component of BOEMRE Layers.

This Map Service contains many of the primary data types created by both the Bureau of Ocean Energy Management (BOEM) and the Bureau of Safety and Environmental Enforcement (BSEE) within the Department of Interior (DOI) for the purpose of managing offshore federal real estate leases for oil, gas, minerals, renewable energy, sand and gravel. These data layers are being made available as REST mapping services for the purpose of web viewing and map overlay viewing in GIS systems. Due to re-projection issues which occur when converting multiple UTM zone data to a single national or regional projected space, and line type changes that occur when converting from UTM to geographic projections, these data layers should not be used for official or legal purposes. Only the original data found within BOEM/BSEE’s official internal database, federal register notices or official paper or pdf map products may be considered as the official information or mapping products used by BOEM or BSEE. A variety of data layers are represented within this REST service are described further below. These and other cadastre information the BOEM and BSEE produces are generated in accordance with 30 Code of Federal Regulations (CFR) 256.8 to support Federal land ownership and mineral resource management.

For more information – Contact: Branch Chief, Mapping and Boundary Branch, BOEM, 381 Elden Street, Herndon, VA 20170. Telephone (703) 787-1312; Email: mapping.boundary.branch@boem.gov

The REST services for National Level Data can be found here: http://gis.boemre.gov/arcgis/rest/services/BOEM_BSEE/MMC_Layers/MapServer

REST services for regional level data can be found by clicking on the region of interest from the following URL: http://gis.boemre.gov/arcgis/rest/services/BOEM_BSEE

Individual Regional Data or in depth metadata for download can be obtained in ESRI Shape file format by clicking on the region of interest from the following URL: http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx

Currently the following layers are available from this REST location:

OCS Drilling Platforms -Locations of structures at and beneath the water surface used for the purpose of exploration and resource extraction. Only platforms in federal Outer Continental Shelf (OCS) waters are included. A database of platforms and rigs is maintained by BSEE.

OCS Oil and Natural Gas Wells -Existing wells drilled for exploration or extraction of oil and/or gas products. Additional information includes the lease number, well name, spud date, the well class, surface area/block number, and statistics on well status summary. Only wells found in federal Outer Continental Shelf (OCS) waters are included. Wells information is updated daily. Additional files are available on well completions and well tests. A database of wells is maintained by BSEE.

OCS Oil & Gas Pipelines -This dataset is a compilation of available oil and gas pipeline data and is maintained by BSEE. Pipelines are used to transport and monitor oil and/or gas from wells within the outer continental shelf (OCS) to resource collection locations. Currently, pipelines managed by BSEE are found in Gulf of Mexico and southern California waters.

Unofficial State Lateral Boundaries - The approximate location of the boundary between two states seaward of the coastline and terminating at the Submerged Lands Act Boundary. Because most State boundary locations have not been officially described beyond the coast, are disputed between states or in some cases the coastal land boundary description is not available, these lines serve as an approximation that was used to determine a starting point for creation of BOEM’s OCS Administrative Boundaries. GIS files are not available for this layer due to its unofficial status.

BOEM OCS Administrative Boundaries - Outer Continental Shelf (OCS) Administrative Boundaries Extending from the Submerged Lands Act Boundary seaward to the Limit of the United States OCS (The U.S. 200 nautical mile Limit, or other marine boundary)For additional details please see the January 3, 2006 Federal Register Notice.

BOEM Limit of OCSLA ‘8(g)’ zone - The Outer Continental Shelf Lands Act '8(g) Zone' lies between the Submerged Lands Act (SLA) boundary line and a line projected 3 nautical miles seaward of the SLA boundary line. Within this zone, oil and gas revenues are shared with the coastal state(s). The official version of the ‘8(g)’ Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction described below.

Submerged Lands Act Boundary - The SLA boundary defines the seaward limit of a state's submerged lands and the landward boundary of federally managed OCS lands. The official version of the SLA Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction Diagrams described below.

Atlantic Wildlife Survey Tracklines(2005-2012) - These data depict tracklines of wildlife surveys conducted in the Mid-Atlantic region since 2005. The tracklines are comprised of aerial and shipboard surveys. These data are intended to be used as a working compendium to inform the diverse number of groups that conduct surveys in the Mid-Atlantic region.The tracklines as depicted in this dataset have been derived from source tracklines and transects. The tracklines have been simplified (modified from their original form) due to the large size of the Mid-Atlantic region and the limited ability to map all areas simultaneously.The tracklines are to be used as a general reference and should not be considered definitive or authoritative. This data can be downloaded from http://www.boem.gov/uploadedFiles/BOEM/Renewable_Energy_Program/Mapping_and_Data/ATL_WILDLIFE_SURVEYS.zip

BOEM OCS Protraction Diagrams & Leasing Maps - This data set contains a national scale spatial footprint of the outer boundaries of the Bureau of Ocean Energy Management’s (BOEM’s) Official Protraction Diagrams (OPDs) and Leasing Maps (LMs). It is updated as needed. OPDs and LMs are mapping products produced and used by the BOEM to delimit areas available for potential offshore mineral leases, determine the State/Federal offshore boundaries, and determine the limits of revenue sharing and other boundaries to be considered for leasing offshore waters. This dataset shows only the outline of the maps that are available from BOEM.Only the most recently published paper or pdf versions of the OPDs or LMs should be used for official or legal purposes. The pdf maps can be found by going to the following link and selecting the appropriate region of interest. http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx Both OPDs and LMs are further subdivided into individual Outer Continental Shelf(OCS) blocks which are available as a separate layer. Some OCS blocks that also contain other boundary information are known as Supplemental Official Block Diagrams (SOBDs.) Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: http://www.boemre.gov/itd/pubs/1999/99-0006.PDF Also see the metadata for each of the individual GIS data layers available for download. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.

BOEM OCS Lease Blocks - Outer Continental Shelf (OCS) lease blocks serve as the legal definition for BOEM offshore boundary coordinates used to define small geographic areas within an Official Protraction Diagram (OPD) for leasing and administrative purposes. OCS blocks relate back to individual Official Protraction Diagrams and are not uniquely numbered. Only the most recently published paper or pdf versions of the OPDs or LMs or SOBDs should be used for official or legal purposes.

description: This data set contains Official Protraction Diagram (OPD) outlines in ESRI shapefile format. Atlantic Region OPDs are approximately 2 degrees wide by one degree high. OPDs are further subdivided into blocks that are 4800 x 4800 meters on a UTM plane (but this file does not include those blocks - only the OPD outline). Where the OPD hits the UTM zone boundary, that zone boundary will be a geodesic line - which will appear slightly curved on the UTM plane. OPDs are numbered using the United Nations International Map of the World Numbering System, and are generally named for land or hydrographic features contained within the limits of the diagram. This file also includes the dividing line between the Atlantic Region and the Gulf of Mexico Region in the area of the Florida Keys. Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: https://www.boem.gov/BOEM-Newsroom/Library/Publications/1999/99-0006-pdf.aspx Because GIS projection and topology functions can change or generalize coordinates, these GIS files are considered to be approximate and are NOT an OFFICIAL record for the exact OPD coordinates or areas. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), available on the web in pdf format, serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.; abstract: This data set contains Official Protraction Diagram (OPD) outlines in ESRI shapefile format. Atlantic Region OPDs are approximately 2 degrees wide by one degree high. OPDs are further subdivided into blocks that are 4800 x 4800 meters on a UTM plane (but this file does not include those blocks - only the OPD outline). Where the OPD hits the UTM zone boundary, that zone boundary will be a geodesic line - which will appear slightly curved on the UTM plane. OPDs are numbered using the United Nations International Map of the World Numbering System, and are generally named for land or hydrographic features contained within the limits of the diagram. This file also includes the dividing line between the Atlantic Region and the Gulf of Mexico Region in the area of the Florida Keys. Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: https://www.boem.gov/BOEM-Newsroom/Library/Publications/1999/99-0006-pdf.aspx Because GIS projection and topology functions can change or generalize coordinates, these GIS files are considered to be approximate and are NOT an OFFICIAL record for the exact OPD coordinates or areas. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), available on the web in pdf format, serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.

This GIS data set depicts a combination of the Outer EEZ from NOS sources, and the Inner EEZ from BOEM sources, producing the geographic regulatory boundaries in federal waters, or Magnuson Stevens Act area. Outer EEZ: NOAA's Office of Coast Survey (OCS) is responsible for generating the Three Nautical Mile Line, Territorial Sea, Contiguous Zone, and Exclusive Economic Zone (EEZ). Traditionally, these maritime limits have been generated by hand from the low water line depicted on paper, U.S. nautical charts. Upon final approval by the U.S. Baseline Committee, these legally-binding maritime limits are applied to the next edition of nautical charts produced by the Marine Chart Division of OCS. Due to new cartographic production processes and the availability of digital products such as Electronic Navigational Charts (ENCs), the Office of Coast Survey (OCS) is generating more accurate, digital maritime limits. Through the use of Geographic Information Systems (GIS) software such as CARIS' LOTS and ESRI's ArcGIS, the latest vector representations of these limits will be available to NOAA cartographers and the public. To create digital limits, the charted low water line is digitized from the largest-scale raster nautical charts and used as input to CARIS' LOTS: Limits and Boundaries software for the designation of a baseline. Other parts of the EEZ include maritime boundary agreements and/or unilateral claims as noted in Federal Register Notice, Volume 60, No. 163, Wednesday August 23, 1995. Once the limits are created, they are exported to a shapefile using CARIS' "Import SHP File" utility. Digital limits of the Exclusive Economic Zone for the Atlantic coast of the United States are contained within a zipped file. Within the zipped file is a shapefile and a text file detailing the individual coordinates. Inner EEZ (SLA): The Submerged Lands Act (SLA) of 1953 grants individual States rights to the natural resources of submerged lands from the coastline to no more than 3 nautical miles (5.6 km) into the Atlantic, Pacific, the Arctic Oceans, and the Gulf of Mexico. The only exceptions are Texas and the west coast of Florida, where State jurisdiction extends from the coastline to no more than 3 marine leagues (16.2 km) into the Gulf of Mexico. This data set contains the Submerged Lands Act (SLA) boundary line (also known as State Seaward Boundary (SSB), or Fed State Boundary) in ESRI shapefile formats for the BOEM Atlantic Region. The SLA boundary defines the seaward limit of a state's submerged lands and the landward boundary of federally managed OCS lands. In the BOEM Atlantic Region it is projected 3 nautical miles offshore from the baseline. Further information on the SLA and development of this line from baseline points can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf http://www.boemre.gov/itd/pubs/1999/99-0006.pdf. Due to slight differences in process and purpose, NOAA's 3 nautical mile line depicted on its charts may differ in some areas from the SLA boundary depicted on BOEM maps and OPDs and should not be confused with the SLA boundary. Therefore this boundary is the only boundary that should be used to depict state/federal seperation of jurisdiction for submerged lands. Because GIS projection and topology functions can change or generalize coordinates, these GIS files are considered to be approximate and are NOT an OFFICIAL record for the exact Submerged Lands Act Boundary. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs) serve as the legal definition for offshore boundary coordinates and area descriptions.

Official Protraction Polygons (OPDs), also known as Official Protraction Diagrams (OPDs), are subdivisions of the Outer Continental Shelf Lease Areas (OCSLA). The polygons are for planning leases in addition to OCS lease blocks. The OPDs are numbered using the United Nations International Map of the World Numbering System. OPD names usually coincide with standard topographic sheet names when diagrams include land areas. A standard OPD is 1 degree in latitude by 2 degrees in longitude at lower latitudes, such as in the Gulf of Mexico (0 - 48 degrees). At higher latitudes (48 - 75 degrees) such as in Alaska and northern Washington, OPDs are 3 degrees wide. OPD limits usually approximate the standard 1:250,000 scale US Geological Survey topographic map series. OPD sheet names relate to land features, or to hydrographic features contained within the limits of the diagram. Dataset SummaryThe source data for this layer is from the US Department of Energy's Bureau of Ocean Energy Management (BOEM) website and is updated regularly. The features in this polygon layer contain attributes to describe each protraction polygon. The BOEM cautions that the location of these features is to be considered approximate and are not an official record for the exact baseline coordinates.Link to source metadataWhat can you do with this layer?This layer is a feature service, which means it can be used for visualization and analysis throughout the ArcGIS Platform. This layer is not editable.

Gulf of Mexico Management Area Boundary. This GIS polygon data delineates the Magnuson-Stevens Fishery Conservation & Management Act (MSA) for the Atlantic Ocean and Gulf of Mexico marine waters. The MSA is the primary law governing marine fisheries management in the United States federal waters. The Act created regional fishery management councils to manage fisheries and promote conservation. The MSA geographic area extends from the state/federal water boundary to the exclusive economic zone (EEZ) outer boundary, and this data is a combination of this outer and inner boundary. The National Marine Fisheries Service (NMFS) uses these boundaries to create the geographic regulatory boundaries in federal waters. The limits of the EEZ are determined from the official U.S. baseline, recognized as the low-water line along the coast as marked on the official U.S. nautical charts in accordance with the articles of the Law of the Sea. The state/federal water boundary is based on the Submerged Lands Act (SLA) boundary line and protraction diagrams. Metadata for the EEZ and the SLA are available at the Multipurpose Marine Cadastre (MMC) website or the specific Agency websites listed in the credits. The Fishery Management Council Boundaries are included in this dataset, and bisect the MSA.Because GIS projection and topology functions can change or generalize coordinates, these GIS files are considered to be approximate, and are NOT an OFFICIAL record for the exact Submerged Lands Act Boundary. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs) serve as the legal definition for offshore boundary coordinates and area descriptions. The EEZ is based on the low-water line along the coast, and is also updated periodically. These digital boundaries do NOT represent the legal definition of the maritime boundaries.