This statistics shows the top 20 fastest growing large-metropolitan areas in the United States between July 1st, 2022 and July 1st, 2023. The total population in the Wilmington, North Carolina, metropolitan area increased by 0.05 percent from 2022 to 2023.

This statistic shows the population growth rate of the top twenty largest urban agglomerations in the United States from 2000 to 2030. Between 2025 and 2030, the average annual population growth rate of the New York-Newark agglomeration is projected to be roughly **** percent.

In 2023, the metropolitan area of New York-Newark-Jersey City had the biggest population in the United States. Based on annual estimates from the census, the metropolitan area had around 19.5 million inhabitants, which was a slight decrease from the previous year. The Los Angeles and Chicago metro areas rounded out the top three. What is a metropolitan statistical area? In general, a metropolitan statistical area (MSA) is a core urbanized area with a population of at least 50,000 inhabitants – the smallest MSA is Carson City, with an estimated population of nearly 56,000. The urban area is made bigger by adjacent communities that are socially and economically linked to the center. MSAs are particularly helpful in tracking demographic change over time in large communities and allow officials to see where the largest pockets of inhabitants are in the country. How many MSAs are in the United States? There were 421 metropolitan statistical areas across the U.S. as of July 2021. The largest city in each MSA is designated the principal city and will be the first name in the title. An additional two cities can be added to the title, and these will be listed in population order based on the most recent census. So, in the example of New York-Newark-Jersey City, New York has the highest population, while Jersey City has the lowest. The U.S. Census Bureau conducts an official population count every ten years, and the new count is expected to be announced by the end of 2030.

United States US: Urban Population Growth data was reported at 0.952 % in 2017. This records a decrease from the previous number of 0.968 % for 2016. United States US: Urban Population Growth data is updated yearly, averaging 1.152 % from Dec 1960 (Median) to 2017, with 58 observations. The data reached an all-time high of 2.449 % in 1960 and a record low of 0.927 % in 1974. United States US: Urban Population Growth data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s United States – Table US.World Bank.WDI: Population and Urbanization Statistics. Urban population refers to people living in urban areas as defined by national statistical offices. It is calculated using World Bank population estimates and urban ratios from the United Nations World Urbanization Prospects.; ; World Bank staff estimates based on the United Nations Population Division's World Urbanization Prospects: 2018 Revision.; Weighted average;

The United States MSA Boundaries data set contains the boundaries for metropolitan statistical areas in the United States. The data set contains information on location, identification, and size. The database includes metropolitan boundaries within all 50 states, the District of Columbia, and Puerto Rico. The general concept of a metropolitan area (MA) is one of a large population nucleus, together with adjacent communities that have a high degree of economic and social integration with that nucleus. Some MAs are defined around two or more nuclei. Each MA must contain either a place with a minimum population of 50,000 or a U.S. Census Bureau-defined urbanized area and a total MA population of at least 100,000 (75,000 in New England). An MA contains one or more central counties. An MA also may include one or more outlying counties that have close economic and social relationships with the central county. An outlying county must have a specified level of commuting to the central counties and also must meet certain standards regarding metropolitan character, such as population density, urban population, and population growth. In New England, MAs consist of groupings of cities and towns rather than whole counties. The territory, population, and housing units in MAs are referred to as "metropolitan." The metropolitan category is subdivided into "inside central city" and "outside central city." The territory, population, and housing units located outside territory designated "metropolitan" are referred to as "non-metropolitan." The metropolitan and non-metropolitan classification cuts across the other hierarchies; for example, generally there are both urban and rural territory within both metropolitan and non-metropolitan areas.

VITAL SIGNS INDICATOR Population (LU1)

FULL MEASURE NAME Population estimates

LAST UPDATED October 2019

DESCRIPTION Population is a measurement of the number of residents that live in a given geographical area, be it a neighborhood, city, county or region.

DATA SOURCES U.S Census Bureau: Decennial Census No link available (1960-1990) http://factfinder.census.gov (2000-2010)

California Department of Finance: Population and Housing Estimates Table E-6: County Population Estimates (1961-1969) Table E-4: Population Estimates for Counties and State (1971-1989) Table E-8: Historical Population and Housing Estimates (2001-2018) Table E-5: Population and Housing Estimates (2011-2019) http://www.dof.ca.gov/Forecasting/Demographics/Estimates/

U.S. Census Bureau: Decennial Census - via Longitudinal Tract Database Spatial Structures in the Social Sciences, Brown University Population Estimates (1970 - 2010) http://www.s4.brown.edu/us2010/index.htm

U.S. Census Bureau: American Community Survey 5-Year Population Estimates (2011-2017) http://factfinder.census.gov

U.S. Census Bureau: Intercensal Estimates Estimates of the Intercensal Population of Counties (1970-1979) Intercensal Estimates of the Resident Population (1980-1989) Population Estimates (1990-1999) Annual Estimates of the Population (2000-2009) Annual Estimates of the Population (2010-2017) No link available (1970-1989) http://www.census.gov/popest/data/metro/totals/1990s/tables/MA-99-03b.txt http://www.census.gov/popest/data/historical/2000s/vintage_2009/metro.html https://www.census.gov/data/datasets/time-series/demo/popest/2010s-total-metro-and-micro-statistical-areas.html

CONTACT INFORMATION vitalsigns.info@bayareametro.gov

METHODOLOGY NOTES (across all datasets for this indicator) All legal boundaries and names for Census geography (metropolitan statistical area, county, city, and tract) are as of January 1, 2010, released beginning November 30, 2010, by the U.S. Census Bureau. A Priority Development Area (PDA) is a locally-designated area with frequent transit service, where a jurisdiction has decided to concentrate most of its housing and jobs growth for development in the foreseeable future. PDA boundaries are current as of August 2019. For more information on PDA designation see http://gis.abag.ca.gov/website/PDAShowcase/.

Population estimates for Bay Area counties and cities are from the California Department of Finance, which are as of January 1st of each year. Population estimates for non-Bay Area regions are from the U.S. Census Bureau. Decennial Census years reflect population as of April 1st of each year whereas population estimates for intercensal estimates are as of July 1st of each year. Population estimates for Bay Area tracts are from the decennial Census (1970 -2010) and the American Community Survey (2008-2012 5-year rolling average; 2010-2014 5-year rolling average; 2013-2017 5-year rolling average). Estimates of population density for tracts use gross acres as the denominator.

Population estimates for Bay Area PDAs are from the decennial Census (1970 - 2010) and the American Community Survey (2006-2010 5 year rolling average; 2010-2014 5-year rolling average; 2013-2017 5-year rolling average). Population estimates for PDAs are derived from Census population counts at the tract level for 1970-1990 and at the block group level for 2000-2017. Population from either tracts or block groups are allocated to a PDA using an area ratio. For example, if a quarter of a Census block group lies with in a PDA, a quarter of its population will be allocated to that PDA. Tract-to-PDA and block group-to-PDA area ratios are calculated using gross acres. Estimates of population density for PDAs use gross acres as the denominator.

Annual population estimates for metropolitan areas outside the Bay Area are from the Census and are benchmarked to each decennial Census. The annual estimates in the 1990s were not updated to match the 2000 benchmark.

The following is a list of cities and towns by geographical area: Big Three: San Jose, San Francisco, Oakland Bayside: Alameda, Albany, Atherton, Belmont, Belvedere, Berkeley, Brisbane, Burlingame, Campbell, Colma, Corte Madera, Cupertino, Daly City, East Palo Alto, El Cerrito, Emeryville, Fairfax, Foster City, Fremont, Hayward, Hercules, Hillsborough, Larkspur, Los Altos, Los Altos Hills, Los Gatos, Menlo Park, Mill Valley, Millbrae, Milpitas, Monte Sereno, Mountain View, Newark, Pacifica, Palo Alto, Piedmont, Pinole, Portola Valley, Redwood City, Richmond, Ross, San Anselmo, San Bruno, San Carlos, San Leandro, San Mateo, San Pablo, San Rafael, Santa Clara, Saratoga, Sausalito, South San Francisco, Sunnyvale, Tiburon, Union City, Vallejo, Woodside Inland, Delta and Coastal: American Canyon, Antioch, Benicia, Brentwood, Calistoga, Clayton, Cloverdale, Concord, Cotati, Danville, Dixon, Dublin, Fairfield, Gilroy, Half Moon Bay, Healdsburg, Lafayette, Livermore, Martinez, Moraga, Morgan Hill, Napa, Novato, Oakley, Orinda, Petaluma, Pittsburg, Pleasant Hill, Pleasanton, Rio Vista, Rohnert Park, San Ramon, Santa Rosa, Sebastopol, Sonoma, St. Helena, Suisun City, Vacaville, Walnut Creek, Windsor, Yountville Unincorporated: all unincorporated towns

Population growth will result in a significant anthropogenic environmental change worldwide through increases in developed land (DL) consumption. DL consumption is an important environmental and socioeconomic process affecting humans and ecosystems. Attention has been given to DL modeling inside highly populated cities. However, modeling DL consumption should expand to non-metropolitan areas where arguably the environmental consequences are more significant. Here, we study all counties within the conterminous U.S. and based on satellite-derived product (National Land Cover Dataset 2001) we calculate the associated DL for each county. By using county population data from the 2000 census we present a comparative study on DL consumption and we propose a model linking population with expected DL consumption. Results indicate distinct geographic patterns of comparatively low and high consuming counties moving from east to west. We also demonstrate that the relationship of DL consumption with population is mostly linear, altering the notion that expected population growth will have lower DL consumption if added in counties with larger population. Added DL consumption is independent of a county’s starting population and only dependent on whether the county belongs to a Metropolitan Statistical Area (MSA). In the overlapping MSA and non-MSA population range there is also a constant DL efficiency gain of approximately 20km2 for a given population for MSA counties which suggests that transitioning from rural to urban counties has significantly higher benefits in lower populations. In addition, we analyze the socioeconomic composition of counties with extremely high or low DL consumption. High DL consumption counties have statistically lower Black/African American population, higher poverty rate and lower income per capita than average in both NMSA and MSA counties. Our analysis offers a baseline to investigate further land consumption strategies in anticipation of growing population pressures.

In 2020, about 82.66 percent of the total population in the United States lived in cities and urban areas. As the United States was one of the earliest nations to industrialize, it has had a comparatively high rate of urbanization over the past two centuries. The urban population became larger than the rural population during the 1910s, and by the middle of the century it is expected that almost 90 percent of the population will live in an urban setting. Regional development of urbanization in the U.S. The United States began to urbanize on a larger scale in the 1830s, as technological advancements reduced the labor demand in agriculture, and as European migration began to rise. One major difference between early urbanization in the U.S. and other industrializing economies, such as the UK or Germany, was population distribution. Throughout the 1800s, the Northeastern U.S. became the most industrious and urban region of the country, as this was the main point of arrival for migrants. Disparities in industrialization and urbanization was a key contributor to the Union's victory in the Civil War, not only due to population sizes, but also through production capabilities and transport infrastructure. The Northeast's population reached an urban majority in the 1870s, whereas this did not occur in the South until the 1950s. As more people moved westward in the late 1800s, not only did their population growth increase, but the share of the urban population also rose, with an urban majority established in both the West and Midwest regions in the 1910s. The West would eventually become the most urbanized region in the 1960s, and over 90 percent of the West's population is urbanized today. Urbanization today New York City is the most populous city in the United States, with a population of 8.3 million, while California has the largest urban population of any state. California also has the highest urbanization rate, although the District of Columbia is considered 100 percent urban. Only four U.S. states still have a rural majority, these are Maine, Mississippi, Montana, and West Virginia.

According to figures recently released by the United States Census, America’s largest metro areas are currently gaining population at impressive rates. The growth in these areas is in fact driving much of the population growth across the nation. Upon closer examination of the data, this growth is the result of two very different migrations – one coming from the location choices of Americans themselves, the other shaped by where new immigrants from outside the United States are heading.While many metro areas are attracting a net-inflow of migrants from other parts of the country, in several of the largest metros – New York, Los Angeles., and Miami, especially – there is actually a net outflow of Americans to the rest of the country. Immigration is driving population growth in these places. Sunbelt metros like Houston, Dallas, and Phoenix, and knowledge hubs like Austin, Seattle, San Francisco, and the District of Columbia are gaining much more from domestic migration.This map charts overall or net migration – a combination of domestic and international migration. Most large metros, those with at least a million residents, had more people coming in than leaving. The metros with the highest levels of population growth due to migration are a mix of knowledge-based economies and Sunbelt metros, including Houston, Dallas, Miami, District of Columbia, San Francisco, Seattle, and Austin. Eleven large metros, nearly all in or near the Rustbelt, had a net outflow of migrants, including Chicago, Detroit, Memphis, Philadelphia, and Saint Louis.Source: Atlantic Cities

This statistic provides projected figures for the Gross Metropolitan Product (GMP) of the United States in 2021, by metropolitan area. Only the 100 leading metropolitan areas are shown here. In 2022, the GMP of the New York-Newark-Jersey City metro area is projected to be around of about **** trillion U.S. dollars. Los Angeles metropolitan areaA metropolitan area in the U.S. is characterized by a relatively high population density and close economic ties through the area, albeit, without the legal incorporation that is found within cities. The Gross Metropolitan Product is measured by the Bureau of Economic Analysis under the U.S. Department of Commerce and includes only metropolitan areas. The GMP of the Los Angeles-Long Beach-Anaheim metropolitan area located in California is projected to be among the highest in the United States in 2021, amounting to *** trillion U.S. dollars. The Houston-The Woodlands-Sugar Land, Texas metro area is estimated to be approximately *** billion U.S. dollars in the same year. The Los Angeles metro area had one of the largest populations in the country, totaling ****** million people in 2021. The Greater Los Angeles region has one of the largest economies in the world and is the U.S. headquarters of many international car manufacturers including Honda, Mazda, and Hyundai. Its entertainment industry has generated plenty of tourism and includes world famous beaches, shopping, motion picture studios, and amusement parks. The Hollywood district is known as the “movie capital of the U.S.” and has its historical roots in the country’s film industry. Its port, the Port of Los Angeles and the Port of Long Beach are aggregately one of the world’s busiest ports. The Port of Los Angelesgenerated some ****** million U.S. dollars in revenue in 2019.

Graph and download economic data for Resident Population in Orlando-Kissimmee-Sanford, FL (MSA) (ORLPOP) from 2000 to 2024 about Orlando, FL, residents, population, and USA.

US Transportation Infrastructure Construction Market size was valued to be USD 17 Billion in the year 2024 and it is expected to reach USD 32.17 Billion in 2032, at a CAGR of 8.3% over the forecast period of 2026 to 2032.

Key Market Drivers

Aging Infrastructure Crisis: The deterioration of existing infrastructure is driving substantial market growth. According to the American Society of Civil Engineers' 2021 Infrastructure Report Card, 43% of America's public roads are in poor or mediocre condition, while 42% of all bridges are at least 50 years old, with 46,154 bridges classified as structurally deficient.

Population Growth and Urbanization: Increasing urban populations are straining existing infrastructure. The U.S. Census Bureau projects the American population will reach 382.2 million by 2040, up from 332 million in 2022. Urban areas, which contain 83% of the U.S. population, are experiencing particularly high growth rates, necessitating expanded transportation infrastructure.

The US office real estate market, while facing headwinds from remote work adoption, demonstrates resilience and ongoing growth. The market size, estimated at $1.5 trillion in 2025, is projected to experience a compound annual growth rate (CAGR) exceeding 4% through 2033, driven by several key factors. Increased urbanization and population growth in major metropolitan areas fuel demand for office space, especially in sectors like Information Technology (IT and ITES), Manufacturing, and BFSI (Banking, Financial Services, and Insurance). Furthermore, the ongoing expansion of consulting firms and other service-based industries continues to contribute to this demand. However, the market faces challenges from evolving work models, with hybrid and remote work arrangements impacting overall occupancy rates. Technological advancements are also transforming the office landscape, pushing for more efficient and technologically advanced spaces, driving demand for renovations and new construction. Major players like Hitt Contracting, Kiewit Corporation, and others are navigating these trends, adapting their strategies to meet the changing needs of their clients. The market segment breakdown will likely reflect the ongoing growth in tech and service sectors, while traditional industries continue to hold significant shares, albeit with potentially slower growth rates. Regional differences will persist, with major metropolitan areas such as New York, Los Angeles, Chicago, and San Francisco likely continuing to dominate the market, but secondary and tertiary markets may experience slower, yet steady growth based on local economic conditions. The long-term forecast anticipates sustained growth, albeit at a potentially moderated pace, due to the evolving work landscape. Strategic investments in building renovations, advanced technologies, and flexible lease agreements are crucial for navigating the market's dynamics. The competition among major players will remain intense, with emphasis on providing value-added services and adapting to tenant preferences. Geographic diversification will be key for companies to mitigate risk and capitalize on growth opportunities across different regions. The successful firms will leverage data analytics, sustainability initiatives, and a deep understanding of tenant needs to thrive in this dynamic and evolving market. This comprehensive report provides an in-depth analysis of the USA office real estate industry, covering the period from 2019 to 2033. It offers invaluable insights into market size, segmentation, trends, and future growth projections, encompassing key sectors like Information Technology (IT and ITES), Manufacturing, BFSI (Banking, Financial Services, and Insurance), Consulting, and Other Services. With a focus on the estimated year 2025 and a forecast period extending to 2033, this report is essential for investors, developers, and industry professionals seeking to navigate the complexities of this dynamic market. The report utilizes a base year of 2025, with a historical period spanning 2019-2024 and a forecast period of 2025-2033. This detailed analysis leverages high-search-volume keywords, like commercial real estate, office space, USA office market, real estate investment trusts (REITs), and office leasing, to ensure maximum online visibility. Key drivers for this market are: Increasing Disposable Income and Middle-Class Expansion, Increased Awareness of Roofing Solutions. Potential restraints include: The presence of counterfeit or substandard roofing materials in the market poses a significant challenge, The roofing industry faces a shortage of skilled labor. Notable trends are: Increase in Leasing Volumes.

The 2015 TIGER Geodatabases are extracts of selected nation based and state based geographic and cartographic information from the U.S. Census Bureau's Master Address File/Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) database. The geodatabases include feature class layers of information for the fifty states, the District of Columbia, Puerto Rico, and the Island areas (American Samoa, the Commonwealth of the Northern Mariana Islands, Guam, and the United States Virgin Islands). The geodatabases do not contain any sensitive data. The 2015 TIGER Geodatabases are designed for use with Esriâ s ArcGIS.

        The 2015 State Geodatabase for Idaho contains multiple layers. These layers are the Block, Block Group, Census Designated Place, Census Tract,
        County Subdivision and Incorporated Place layers.

        Block Groups (BGs) are clusters of blocks within the same census tract. Each census tract contains at least one BG, and BGs are uniquely numbered
        within census tracts. BGs have a valid code range of 0 through 9. BGs have the same first digit of their 4-digit census block number from the same
        decennial census. For example, tabulation blocks numbered 3001, 3002, 3003,.., 3999 within census tract 1210.02 are also within BG 3 within that
        census tract. BGs coded 0 are intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and
        Great Lakes water areas. Block groups generally contain between 600 and 3,000 people. A BG usually covers a contiguous area but never crosses
        county or census tract boundaries. They may, however, cross the boundaries of other geographic entities like county subdivisions, places, urban
        areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. 

        The BG boundaries in this release are those that were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the
        2010 Census. 

        The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to
        previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people.
        When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living
        conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by
        highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to
        population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable
        features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to
        allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and
        county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may
        consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities
        that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that
        include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American
        Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little
        or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial
        park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area. 

        An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division (MCD),
        which generally is created to provide services or administer an area without regard, necessarily, to population. Places always nest within a state,
        but may extend across county and county subdivision boundaries. An incorporated place usually is a city, town, village, or borough, but can have
        other legal descriptions. CDPs are delineated for the decennial census as the statistical counterparts of incorporated places. CDPs are delineated
        to provide data for settled concentrations of population that are identifiable by name, but are not legally incorporated under the laws of the state
        in which they are located. The boundaries for CDPs often are defined in partnership with state, local, and/or tribal officials and usually coincide
        with visible features or the boundary of an adjacent incorporated place or another legal entity. CDP boundaries often change from one decennial
        census to the next with changes in the settlement pattern and development; a CDP with the same name as in an earlier census does not necessarily
        have the same boundary. The only population/housing size requirement for CDPs is that they must contain some housing and population. 

        The boundaries of most incorporated places in this shapefile are as of January 1, 2013, as reported through the Census Bureau's Boundary and
        Annexation Survey (BAS). Limited updates that occurred after January 1, 2013, such as newly incorporated places, are also included. The boundaries
        of all CDPs were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census.

        The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no
        counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The
        latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri,
        Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary
        divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data
        presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data
        presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto
        Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin
        Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. 

        The boundaries for counties and equivalent entities are mostly as of January 1, 2013, primarily as reported through the Census Bureau's Boundary and
        Annexation Survey (BAS). However, some changes made after January 2013, including the addition and deletion of counties, are included.

        County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include
        legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. For the 2010 Census,
        the MCDs are the primary governmental and/or administrative divisions of counties in 29 States and Puerto Rico; Tennessee changed from having CCDs
        for Census 2000 to having MCDs for the 2010 Census. In MCD States where no MCD exists or is not defined, the Census Bureau creates statistical
        unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county
        subdivisions. The boundaries of most legal MCDs are as of January 1, 2013, as reported through the Census Bureau's Boundary and Annexation Survey
        (BAS). 

        The boundaries of all CCDs, delineated in 21 states, are those as reported as part of the Census Bureau's Participant Statistical Areas Program
        (PSAP) for the 2010 Census.

The 2015 TIGER Geodatabases are extracts of selected nation based and state based geographic and cartographic information from the U.S. Census Bureau's Master Address File/Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) database. The geodatabases include feature class layers of information for the fifty states, the District of Columbia, Puerto Rico, and the Island areas (American Samoa, the Commonwealth of the Northern Mariana Islands, Guam, and the United States Virgin Islands). The geodatabases do not contain any sensitive data. The 2015 TIGER Geodatabases are designed for use with Esriâ s ArcGIS.

        The 2015 State Geodatabase for Texas contains multiple layers. These layers are the Block, Block Group, Census Designated Place, Census Tract,
        County Subdivision and Incorporated Place layers.

        Block Groups (BGs) are clusters of blocks within the same census tract. Each census tract contains at least one BG, and BGs are uniquely numbered
        within census tracts. BGs have a valid code range of 0 through 9. BGs have the same first digit of their 4-digit census block number from the same
        decennial census. For example, tabulation blocks numbered 3001, 3002, 3003,.., 3999 within census tract 1210.02 are also within BG 3 within that
        census tract. BGs coded 0 are intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and
        Great Lakes water areas. Block groups generally contain between 600 and 3,000 people. A BG usually covers a contiguous area but never crosses
        county or census tract boundaries. They may, however, cross the boundaries of other geographic entities like county subdivisions, places, urban
        areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. The BG boundaries in this release
        are those that were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census. 

        The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to
        previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people.
        When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living
        conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by
        highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to
        population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable
        features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to
        allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and
        county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may
        consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities
        that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that
        include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American
        Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little
        or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial
        park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area. 

        An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division (MCD),
        which generally is created to provide services or administer an area without regard, necessarily, to population. Places always nest within a state,
        but may extend across county and county subdivision boundaries. An incorporated place usually is a city, town, village, or borough, but can have
        other legal descriptions. CDPs are delineated for the decennial census as the statistical counterparts of incorporated places. CDPs are delineated
        to provide data for settled concentrations of population that are identifiable by name, but are not legally incorporated under the laws of the state
        in which they are located. The boundaries for CDPs often are defined in partnership with state, local, and/or tribal officials and usually coincide
        with visible features or the boundary of an adjacent incorporated place or another legal entity. CDP boundaries often change from one decennial
        census to the next with changes in the settlement pattern and development; a CDP with the same name as in an earlier census does not necessarily
        have the same boundary. The only population/housing size requirement for CDPs is that they must contain some housing and population. 

        The boundaries of most incorporated places in this shapefile are as of January 1, 2013, as reported through the Census Bureau's Boundary and
        Annexation Survey (BAS). Limited updates that occurred after January 1, 2013, such as newly incorporated places, are also included. The boundaries
        of all CDPs were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census.

        The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no
        counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The
        latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri,
        Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary
        divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data
        presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data
        presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto
        Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin
        Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. The boundaries for
        counties and equivalent entities are mostly as of January 1, 2013, primarily as reported through the Census Bureau's Boundary and
        Annexation Survey (BAS). However, some changes made after January 2013, including the addition and deletion of counties, are included.

        County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include
        legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. For the 2010 Census,
        the MCDs are the primary governmental and/or administrative divisions of counties in 29 States and Puerto Rico; Tennessee changed from having CCDs
        for Census 2000 to having MCDs for the 2010 Census. In MCD States where no MCD exists or is not defined, the Census Bureau creates statistical
        unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county
        subdivisions. The boundaries of most legal MCDs are as of January 1, 2013, as reported through the Census Bureau's Boundary and Annexation Survey
        (BAS). The boundaries of all CCDs, delineated in 21 states, are those as reported as part of the Census Bureau's Participant Statistical Areas
        Program (PSAP) for the 2010 Census.

Building Advertising Market Outlook

The global building advertising market size was valued at approximately USD 12 billion in 2023 and is expected to reach around USD 22 billion by 2032, growing at a CAGR of 6.5% during the forecast period. The growth of the building advertising market is primarily driven by increasing urbanization, the proliferation of technological advancements, and the rising need for impactful advertisement mediums in densely populated urban areas.

One of the significant growth factors for the building advertising market is the rapid urbanization occurring worldwide. As cities expand and new buildings are constructed, there is an increasing number of surfaces available for advertising. This urban sprawl offers advertisers more opportunities to place their ads in high-traffic areas, garnering more visibility and engagement from potential consumers. Moreover, the rising population density in urban areas means that advertisers can reach a larger audience with a single advertisement placement, increasing the return on investment.

Technological advancements have also played a crucial role in the growth of the building advertising market. The advent of digital billboards and LED displays has revolutionized the way advertisements are presented, making them more dynamic, engaging, and customizable. These technologies allow for real-time updates and targeted advertising based on various factors such as time of day or demographic data. This level of customization ensures that advertisements are more relevant to the audience, thereby increasing their effectiveness.

Digital Buildings are transforming the landscape of urban advertising by integrating advanced technologies directly into the infrastructure of modern cities. These buildings are equipped with state-of-the-art digital displays that can showcase advertisements in a dynamic and engaging manner. By utilizing the facades of these buildings, advertisers can reach a vast audience with visually stunning content that captures attention and enhances brand visibility. The integration of digital technology into building architecture not only provides a platform for advertising but also contributes to the aesthetic appeal of urban environments, making cities more vibrant and interactive.

Another critical factor driving market growth is the increasing demand for impactful and memorable advertising mediums. Traditional forms of advertising such as TV and radio are becoming less effective as consumers are inundated with advertisements from multiple channels. Building advertising offers a unique and eye-catching alternative that can capture the attention of passersby in a way that traditional media cannot. This is particularly important in today's fast-paced world where consumers have shorter attention spans and are constantly bombarded with information.

Regionally, North America and Asia Pacific have been the leading markets for building advertising. North America, particularly the United States, has a mature market with well-established infrastructure and a high level of technological adoption. On the other hand, Asia Pacific is experiencing rapid growth due to increasing urbanization and economic development in countries like China and India. Europe also holds a significant share of the market, driven by its advanced technological landscape and high population density in urban areas. Latin America and the Middle East & Africa are expected to show moderate growth, with increasing investments in urban infrastructure and advertising capabilities.

Type Analysis

Digital billboards represent one of the fastest-growing segments within the building advertising market. These billboards are equipped with LED or LCD screens that can display dynamic and interactive content. The ability to change advertisements in real-time makes digital billboards highly versatile and effective. Advertisers can schedule multiple ads throughout the day, targeting different demographics and optimizing their campaigns based on real-time performance data. This flexibility is highly appealing to businesses looking to maximize their advertising budgets.

Traditional billboards, while not as technologically advanced as their digital counterparts, still hold a significant share of the market. These billboards offer a cost-effective way for brands to reach a broad audience. They are particularly effective in high-traffic areas such as highways and city centers where they ca

The US residential real estate market, a significant component of the global market, is characterized by a moderate but steady growth trajectory. With a projected Compound Annual Growth Rate (CAGR) of 2.04% from 2025 to 2033, the market demonstrates resilience despite fluctuating economic conditions. The 2025 market size, while not explicitly provided, can be reasonably estimated based on available data and considering recent market trends. Assuming a continuation of the observed growth pattern in preceding years, a substantial market value in the trillions is plausible. Key drivers include sustained population growth, particularly in urban areas, increasing household formations among millennials and Gen Z, and ongoing demand for both rental properties (apartments and condominiums) and owner-occupied homes (landed houses and villas). However, challenges persist, including rising interest rates which impact affordability, supply chain constraints affecting new construction, and the potential for macroeconomic shifts to influence buyer confidence. Segmentation analysis highlights the varying performance across property types, with apartments and condominiums potentially experiencing higher demand in urban centers while landed houses and villas appeal to a different demographic profile and geographic distribution. The competitive landscape includes a mix of large publicly traded real estate investment trusts (REITs) like AvalonBay Communities and Equity Residential, regional developers like Mill Creek Residential, and established brokerage firms such as RE/MAX and Keller Williams Realty Inc., all vying for market share within distinct segments. The geographical distribution of the market shows significant concentration within North America, particularly in the US, reflecting established infrastructure, economic stability, and favorable regulatory environments. While other regions like Europe and Asia-Pacific contribute to the global market, the US continues to be a dominant force. The forecast period (2025-2033) suggests continued expansion, albeit at a moderate pace, indicating a relatively stable and mature market that remains attractive for investment and development. Future growth hinges upon addressing affordability concerns, navigating fluctuating interest rates, and managing supply-demand dynamics to ensure sustainable market expansion. Government policies influencing housing affordability and construction regulations will play a crucial role in shaping the future trajectory of the US residential real estate sector. Recent developments include: May 2022: Resource REIT Inc. completed the sale of all of its outstanding shares of common stock to Blackstone Real Estate Income Trust Inc. for USD 14.75 per share in an all-cash deal valued at USD 3.7 billion, including the assumption of the REIT's debt., February 2022: The largest owner of commercial real estate in the world and private equity company Blackstone is growing its portfolio of residential rentals and commercial properties in the United States. The company revealed that it would shell out about USD 6 billion to buy Preferred Apartment Communities, an Atlanta-based real estate investment trust that owns 44 multifamily communities and roughly 12,000 homes in the Southeast, mostly in Atlanta, Nashville, Charlotte, North Carolina, and the Florida cities of Jacksonville, Orlando, and Tampa.. Notable trends are: Existing Home Sales Witnessing Strong Growth.

The 2015 TIGER Geodatabases are extracts of selected nation based and state based geographic and cartographic information from the U.S. Census Bureau's Master Address File/Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) database. The geodatabases include feature class layers of information for the fifty states, the District of Columbia, Puerto Rico, and the Island areas (American Samoa, the Commonwealth of the Northern Mariana Islands, Guam, and the United States Virgin Islands). The geodatabases do not contain any sensitive data. The 2015 TIGER Geodatabases are designed for use with Esriâ s ArcGIS.

        The 2015 State Geodatabase for Oregon contains multiple layers. These layers are the Block, Block Group, Census Designated Place, Census Tract,
        County Subdivision and Incorporated Place layers.

        Block Groups (BGs) are clusters of blocks within the same census tract. Each census tract contains at least one BG, and BGs are uniquely numbered
        within census tracts. BGs have a valid code range of 0 through 9. BGs have the same first digit of their 4-digit census block number from the same
        decennial census. For example, tabulation blocks numbered 3001, 3002, 3003,.., 3999 within census tract 1210.02 are also within BG 3 within that
        census tract. BGs coded 0 are intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and
        Great Lakes water areas. Block groups generally contain between 600 and 3,000 people. A BG usually covers a contiguous area but never crosses
        county or census tract boundaries. They may, however, cross the boundaries of other geographic entities like county subdivisions, places, urban
        areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. The BG boundaries in this release
        are those that were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census. 

        The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to
        previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people.
        When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living
        conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by
        highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to
        population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable
        features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to
        allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and
        county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may
        consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities
        that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that
        include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American
        Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little
        or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial
        park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area. 

        An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division (MCD),
        which generally is created to provide services or administer an area without regard, necessarily, to population. Places always nest within a state,
        but may extend across county and county subdivision boundaries. An incorporated place usually is a city, town, village, or borough, but can have
        other legal descriptions. CDPs are delineated for the decennial census as the statistical counterparts of incorporated places. CDPs are delineated
        to provide data for settled concentrations of population that are identifiable by name, but are not legally incorporated under the laws of the state
        in which they are located. The boundaries for CDPs often are defined in partnership with state, local, and/or tribal officials and usually coincide
        with visible features or the boundary of an adjacent incorporated place or another legal entity. CDP boundaries often change from one decennial
        census to the next with changes in the settlement pattern and development; a CDP with the same name as in an earlier census does not necessarily
        have the same boundary. The only population/housing size requirement for CDPs is that they must contain some housing and population. 

        The boundaries of most incorporated places in this shapefile are as of January 1, 2013, as reported through the Census Bureau's Boundary and
        Annexation Survey (BAS). Limited updates that occurred after January 1, 2013, such as newly incorporated places, are also included. The boundaries
        of all CDPs were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census.

        The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no
        counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The
        latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri,
        Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary
        divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data
        presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data
        presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto
        Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin
        Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. The boundaries for
        counties and equivalent entities are mostly as of January 1, 2013, primarily as reported through the Census Bureau's Boundary and
        Annexation Survey (BAS). However, some changes made after January 2013, including the addition and deletion of counties, are included.

        County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include
        legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. For the 2010 Census,
        the MCDs are the primary governmental and/or administrative divisions of counties in 29 States and Puerto Rico; Tennessee changed from having CCDs
        for Census 2000 to having MCDs for the 2010 Census. In MCD States where no MCD exists or is not defined, the Census Bureau creates statistical
        unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county
        subdivisions. The boundaries of most legal MCDs are as of January 1, 2013, as reported through the Census Bureau's Boundary and Annexation Survey
        (BAS). The boundaries of all CCDs, delineated in 21 states, are those as reported as part of the Census Bureau's Participant Statistical Areas
        Program (PSAP) for the 2010 Census.

The 2015 TIGER Geodatabases are extracts of selected nation based and state based geographic and cartographic information from the U.S. Census Bureau's Master Address File/Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) database. The geodatabases include feature class layers of information for the fifty states, the District of Columbia, Puerto Rico, and the Island areas (American Samoa, the Commonwealth of the Northern Mariana Islands, Guam, and the United States Virgin Islands). The geodatabases do not contain any sensitive data. The 2015 TIGER Geodatabases are designed for use with Esriâ s ArcGIS.

        The 2015 State Geodatabase for Virginia contains multiple layers. These layers are the Block, Block Group, Census Designated Place, Census Tract,
        County Subdivision and Incorporated Place layers.

        Block Groups (BGs) are clusters of blocks within the same census tract. Each census tract contains at least one BG, and BGs are uniquely numbered
        within census tracts. BGs have a valid code range of 0 through 9. BGs have the same first digit of their 4-digit census block number from the same
        decennial census. For example, tabulation blocks numbered 3001, 3002, 3003,.., 3999 within census tract 1210.02 are also within BG 3 within that
        census tract. BGs coded 0 are intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and
        Great Lakes water areas. Block groups generally contain between 600 and 3,000 people. A BG usually covers a contiguous area but never crosses
        county or census tract boundaries. They may, however, cross the boundaries of other geographic entities like county subdivisions, places, urban
        areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. The BG boundaries in this release
        are those that were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census. 

        The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to
        previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people.
        When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living
        conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by
        highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to
        population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable
        features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to
        allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and
        county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may
        consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities
        that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that
        include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American
        Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little
        or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial
        park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area. 

        An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division (MCD),
        which generally is created to provide services or administer an area without regard, necessarily, to population. Places always nest within a state,
        but may extend across county and county subdivision boundaries. An incorporated place usually is a city, town, village, or borough, but can have
        other legal descriptions. CDPs are delineated for the decennial census as the statistical counterparts of incorporated places. CDPs are delineated
        to provide data for settled concentrations of population that are identifiable by name, but are not legally incorporated under the laws of the state
        in which they are located. The boundaries for CDPs often are defined in partnership with state, local, and/or tribal officials and usually coincide
        with visible features or the boundary of an adjacent incorporated place or another legal entity. CDP boundaries often change from one decennial
        census to the next with changes in the settlement pattern and development; a CDP with the same name as in an earlier census does not necessarily
        have the same boundary. The only population/housing size requirement for CDPs is that they must contain some housing and population. 

        The boundaries of most incorporated places in this shapefile are as of January 1, 2013, as reported through the Census Bureau's Boundary and
        Annexation Survey (BAS). Limited updates that occurred after January 1, 2013, such as newly incorporated places, are also included. The boundaries
        of all CDPs were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census.

        The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no
        counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The
        latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri,
        Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary
        divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data
        presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data
        presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto
        Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin
        Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. The boundaries for
        counties and equivalent entities are mostly as of January 1, 2013, primarily as reported through the Census Bureau's Boundary and
        Annexation Survey (BAS). However, some changes made after January 2013, including the addition and deletion of counties, are included.

        County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include
        legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories. For the 2010 Census,
        the MCDs are the primary governmental and/or administrative divisions of counties in 29 States and Puerto Rico; Tennessee changed from having CCDs
        for Census 2000 to having MCDs for the 2010 Census. In MCD States where no MCD exists or is not defined, the Census Bureau creates statistical
        unorganized territories to complete coverage. The entire area of the United States, Puerto Rico, and the Island Areas are covered by county
        subdivisions. The boundaries of most legal MCDs are as of January 1, 2013, as reported through the Census Bureau's Boundary and Annexation Survey
        (BAS). The boundaries of all CCDs, delineated in 21 states, are those as reported as part of the Census Bureau's Participant Statistical Areas
        Program (PSAP) for the 2010 Census.

The US property management industry, a significant segment of the broader real estate market, is experiencing steady growth, driven by several key factors. The increasing urbanization and population growth, particularly in major metropolitan areas, fuels the demand for rental properties and professional property management services. The rise of institutional investors in the multifamily sector further contributes to this demand, as these investors often outsource management to specialized firms. Technological advancements, such as property management software and online tenant portals, are streamlining operations and improving efficiency, leading to increased market penetration and attracting new players. Furthermore, the evolving preferences of renters, who increasingly value convenience and amenities, necessitate sophisticated property management solutions, fostering industry expansion. The commercial sector also contributes significantly, with businesses relying on professional managers for office buildings, retail spaces, and industrial properties. While the industry faces challenges, such as fluctuating interest rates impacting investment decisions and potential labor shortages within the property management sector, the long-term outlook remains positive. The diverse service offerings within the industry—from marketing and property evaluation to tenant services and maintenance—provide resilience against economic downturns. The fragmentation of the market presents opportunities for both established players and new entrants, with mergers and acquisitions potentially reshaping the competitive landscape in the coming years. The increasing focus on sustainable and environmentally friendly practices also presents a growth avenue, as property managers adapt their strategies to meet evolving tenant expectations and regulatory requirements. Considering the provided global market size of $81.52 billion (assuming “Million” is a typo and should be “Billion”) and a CAGR of 3.94%, a reasonable estimate for the US market share, given its prominence in the global real estate market, would place it in the range of $40-50 billion in 2025. This estimate is further supported by the presence of large US-based property management companies listed in the provided data. Recent developments include: February 2024: Wood Partners, the 4th-largest real estate developer in the United States, sold its property management business for its 38,000+ units in 17 states to Greystar (Charleston, South Carolina), the country's largest apartment management company., November 2023: RealPage Inc. acquired On-site Managers Inc. for approximately USD 250 million in cash. On-Site is an on-demand leasing platform for multifamily property management and renters that integrates leads from all sources and converts them to signed leases for the multifamily industry and the single-family housing industry. RealPage will continue to support the on-site platform and plans to integrate the best of its on-site platforms in the future. Clients on both platforms will continue to benefit from future improvements without disruption.. Key drivers for this market are: Increasing Demand from the Commercial Segment is Driving the Market, Increasing Disposable Income of Consumers is Driving the market. Potential restraints include: Increasing Demand from the Commercial Segment is Driving the Market, Increasing Disposable Income of Consumers is Driving the market. Notable trends are: Demand from the Residential Sector is Supporting the Market.