Global historical population data

The population data starts from -1000000 BC to 1990 with the average number of people. There are several population data from the different reports such as: Deevey...

The earliest point where scientists can make reasonable estimates for the population of global regions is around 10,000 years before the Common Era (or 12,000 years ago). Estimates suggest that Asia has consistently been the most populated continent, and the least populated continent has generally been Oceania (although it was more heavily populated than areas such as North America in very early years). Population growth was very slow, but an increase can be observed between most of the given time periods. There were, however, dips in population due to pandemics, the most notable of these being the impact of plague in Eurasia in the 14th century, and the impact of European contact with the indigenous populations of the Americas after 1492, where it took almost four centuries for the population of Latin America to return to its pre-1500 level. The world's population first reached one billion people in 1803, which also coincided with a spike in population growth, due to the onset of the demographic transition. This wave of growth first spread across the most industrially developed countries in the 19th century, and the correlation between demographic development and industrial or economic maturity continued until today, with Africa being the final major region to begin its transition in the late-1900s.

In 1800, the population of Spain was approximately 14.7 million. This figure would rise consistently throughout the 19th century, and early 20th century. The population growth rate was set to increase in the mid-1900s, but this was interrupted by the Spanish Civil War, which would claim around half a million lives between 1936 and 1939. In spite of the war, the Spanish population continued to grow throughout these years, and reached 28 million by the middle of the century. Between the 1950s and 1970s, Spain observed a significant increase in its population growth, facilitated by the baby boom that followed the Second World War (as in most of Western Europe) as well as general medical improvements and increased life expectancy.

Beginning in the 1980s, Spain would begin a demographic transition marked by a dramatic drop in the fertility rate of the country, resulting in the population only growing by two million between the mid-1980s and 2000 (compared to an increase of two million every five or six years beforehand). There was a sharp rise in Spain’s population from 2000 to 2008, as strong economic growth would be accompanied by a dramatic surge in immigration to the country. This would plateau at just over 46 million in 2008 however, as the Great Recession took its toll on the country’s economy, and in 2020, Spain is estimated to have a population of approximately 46.8 million, which is the sixth-largest in Europe.

This dataset is a digital compilation of the "Population of States and Counties of the United States: 1790-1990" publication and the "Census U.S. Decennial County Population Data, 1900-1990" resource. It provides population data for U.S. states and counties from the years 1790 to 1950. In addition to the county and state population figures, the dataset also includes the total U.S. population and state population data, as presented in the "Population of States and Counties of the United States: 1790-1990" publication.

Historical dataset showing total population for the world by year from 1950 to 2025.

Population Projections for Maryland and the jurisdictions - historical population 1970-2010; projections out to 2040. Projections prepared by the Maryland Department of Planning, July 2014

Context The world's population has undergone remarkable growth, exceeding 7.5 billion by mid-2019 and continuing to surge beyond previous estimates. Notably, China and India stand as the two most populous countries, with China's population potentially facing a decline while India's trajectory hints at surpassing it by 2030. This significant demographic shift is just one facet of a global landscape where countries like the United States, Indonesia, Brazil, Nigeria, and others, each with populations surpassing 100 million, play pivotal roles.

The steady decrease in growth rates, though, is reshaping projections. While the world's population is expected to exceed 8 billion by 2030, growth will notably decelerate compared to previous decades. Specific countries like India, Nigeria, and several African nations will notably contribute to this growth, potentially doubling their populations before rates plateau.

Content This dataset provides comprehensive historical population data for countries and territories globally, offering insights into various parameters such as area size, continent, population growth rates, rankings, and world population percentages. Spanning from 1970 to 2023, it includes population figures for different years, enabling a detailed examination of demographic trends and changes over time.

Dataset Structured with meticulous detail, this dataset offers a wide array of information in a format conducive to analysis and exploration. Featuring parameters like population by year, country rankings, geographical details, and growth rates, it serves as a valuable resource for researchers, policymakers, and analysts. Additionally, the inclusion of growth rates and world population percentages provides a nuanced understanding of how countries contribute to global demographic shifts.

This dataset is invaluable for those interested in understanding historical population trends, predicting future demographic patterns, and conducting in-depth analyses to inform policies across various sectors such as economics, urban planning, public health, and more.

The United States had a population of 76.3 million people in 1900. Approximately 67 million of these were white, of whom the majority were native born, while most of the remaining nine million people were Black. At this time, the United States Census included persons of Hispanic origin along with its white population, however the Hispanic share of the population in 1900 was much lower than it is today.

The total population in Vietnam was estimated at 101.3 million people in 2024, according to the latest census figures and projections from Trading Economics. This dataset provides - Vietnam Population - actual values, historical data, forecast, chart, statistics, economic calendar and news.

Historical dataset showing total population for Jamaica by year from 1950 to 2025.

Historical dataset of population level and growth rate for the Chicago metro area from 1950 to 2025.

VITAL SIGNS INDICATOR Population (LU1)

FULL MEASURE NAME
Population estimates

LAST UPDATED
February 2023

DESCRIPTION
Population is a measurement of the number of residents that live in a given geographical area, be it a neighborhood, city, county or region.

DATA SOURCE
California Department of Finance: Population and Housing Estimates - http://www.dof.ca.gov/Forecasting/Demographics/Estimates/
Table E-6: County Population Estimates (1960-1970)
Table E-4: Population Estimates for Counties and State (1970-2021)
Table E-8: Historical Population and Housing Estimates (1990-2010)
Table E-5: Population and Housing Estimates (2010-2021)

Bay Area Jurisdiction Centroids (2020) - https://data.bayareametro.gov/Boundaries/Bay-Area-Jurisdiction-Centroids-2020-/56ar-t6bs
Computed using 2020 US Census TIGER boundaries

U.S. Census Bureau: Decennial Census Population Estimates - http://www.s4.brown.edu/us2010/index.htm- via Longitudinal Tract Database Spatial Structures in the Social Sciences, Brown University
1970-2020

U.S. Census Bureau: American Community Survey (5-year rolling average; tract) - https://data.census.gov/
2011-2021
Form B01003

Priority Development Areas (Plan Bay Area 2050) - https://opendata.mtc.ca.gov/datasets/MTC::priority-development-areas-plan-bay-area-2050/about

CONTACT INFORMATION
vitalsigns.info@bayareametro.gov

METHODOLOGY NOTES (across all datasets for this indicator)
All historical data reported for Census geographies (metropolitan areas, county, city and tract) use current legal boundaries and names. A Priority Development Area (PDA) is a locally-designated area with frequent transit service, where a jurisdiction has decided to concentrate most of its housing and jobs growth for development in the foreseeable future. PDA boundaries are current as of December 2022.

Population estimates for Bay Area counties and cities are from the California Department of Finance, which are as of January 1st of each year. Population estimates for non-Bay Area regions are from the U.S. Census Bureau. Decennial Census years reflect population as of April 1st of each year whereas population estimates for intercensal estimates are as of July 1st of each year. Population estimates for Bay Area tracts are from the decennial Census (1970-2020) and the American Community Survey (2011-2021 5-year rolling average). Estimates of population density for tracts use gross acres as the denominator.

Population estimates for Bay Area tracts and PDAs are from the decennial Census (1970-2020) and the American Community Survey (2011-2021 5-year rolling average). Population estimates for PDAs are allocated from tract-level Census population counts using an area ratio. For example, if a quarter of a Census tract lies with in a PDA, a quarter of its population will be allocated to that PDA. Estimates of population density for PDAs use gross acres as the denominator. Note that the population densities between PDAs reported in previous iterations of Vital Signs are mostly not comparable due to minor differences and an updated set of PDAs (previous iterations reported Plan Bay Area 2040 PDAs, whereas current iterations report Plan Bay Area 2050 PDAs).

The following is a list of cities and towns by geographical area:

Big Three: San Jose, San Francisco, Oakland

Bayside: Alameda, Albany, Atherton, Belmont, Belvedere, Berkeley, Brisbane, Burlingame, Campbell, Colma, Corte Madera, Cupertino, Daly City, East Palo Alto, El Cerrito, Emeryville, Fairfax, Foster City, Fremont, Hayward, Hercules, Hillsborough, Larkspur, Los Altos, Los Altos Hills, Los Gatos, Menlo Park, Mill Valley, Millbrae, Milpitas, Monte Sereno, Mountain View, Newark, Pacifica, Palo Alto, Piedmont, Pinole, Portola Valley, Redwood City, Richmond, Ross, San Anselmo, San Bruno, San Carlos, San Leandro, San Mateo, San Pablo, San Rafael, Santa Clara, Saratoga, Sausalito, South San Francisco, Sunnyvale, Tiburon, Union City, Vallejo, Woodside

Inland, Delta and Coastal: American Canyon, Antioch, Benicia, Brentwood, Calistoga, Clayton, Cloverdale, Concord, Cotati, Danville, Dixon, Dublin, Fairfield, Gilroy, Half Moon Bay, Healdsburg, Lafayette, Livermore, Martinez, Moraga, Morgan Hill, Napa, Novato, Oakley, Orinda, Petaluma, Pittsburg, Pleasant Hill, Pleasanton, Rio Vista, Rohnert Park, San Ramon, Santa Rosa, Sebastopol, Sonoma, St. Helena, Suisun City, Vacaville, Walnut Creek, Windsor, Yountville

Unincorporated: all unincorporated towns

Historical dataset showing total population for North America by year from 1950 to 2025.

In 1800, the territory of modern-day Saudi Arabia had a population of just over two million people. This figure would see little change for over a century, only rising to three million in the 1940s, almost a century and a half later. The population of Saudi Arabia would only see a major increase starting in the 1950s, as the oil reservoirs discovered in 1938 led to a booming oil industry which has been fundamental to the country's socioeconomic development ever since. While growth would slow somewhat from the 1980s to 1990s, partially due to the economic impact of the oil-price crash of 1986, the population would continue to increase well into the 21st century, and in 2020, just under 35 million people are estimated to live in the country.

Historical population as enumerated and corrected from 1790 through 2020. North Carolina was one of the 13 original States and by the time of the 1790 census had essentially its current boundaries. The Census is mandated by the United States Constitution and was first completed for 1790. The population has been counted every ten years hence, with some limitations. In 1790 census coverage included most of the State, except for areas in the west, parts of which were not enumerated until 1840. The population for 1810 includes Walton County, enumerated as part of Georgia although actually within North Carolina. Historical populations shown here reflect the population of the respective named county and not necessarily the population of the area of the county as it was defined for a particular census. County boundaries shown in maps reflect boundaries as defined in 2020. Historic boundaries for some counties may include additional geographic areas or may be smaller than the current geographic boundaries. Notes below list the county or counties with which the population of a currently defined county were enumerated historically (Current County: Population counted in). The current 100 counties have been in place since the 1920 Census, although some modifications to the county boundaries have occurred since that time. For historical county boundaries see: Atlas of Historical County Boundaries Project (newberry.org)County Notes: Note 1: Total for 1810 includes population (1,026) of Walton County, reported as a Georgia county but later determined to be situated in western North Carolina. Total for 1890 includes 2 Indians in prison, not reported by county. Note 2: Alexander: *Iredell, Burke, Wilkes. Note 3: Avery: *Caldwell, Mitchell, Watauga. Note 4: Buncombe: *Burke, Rutherford; see also note 22. Note 5: Caldwell: *Burke, Wilkes, Yancey. Note 6: Cleveland: *Rutherford, Lincoln. Note 7: Columbus: *Bladen, Brunswick. Note 8: Dare: *Tyrrell, Currituck, Hyde. Note 9: Hoke: *Cumberland, Robeson. Note 10: Jackson: *Macon, Haywood. Note 11: Lee: *Moore, Chatham. Note 12: Lenoir: *Dobbs (Greene); Craven. Note 13: McDowell: *Burke, Rutherford. Note 14: Madison: *Buncombe, Yancey. Note 15: Mitchell: *Yancey, Watauga. Note 16: Pamlico: *Craven, Beaufort. Note 17: Polk: *Rutherford, Henderson. Note 18: Swain: *Jackson, Macon. Note 19: Transylvania: *Henderson, Jackson. Note 20: Union: *Mecklenburg, Anson. Note 21: Vance: *Granville, Warren, Franklin. Note 22: Walton: Created in 1803 as a Georgia county and reported in 1810 as part of Georgia; abolished after a review of the State boundary determined that its area was located in North Carolina. By 1820 it was part of Buncombe County. Note 23: Watauga: *Ashe, Yancey, Wilkes; Burke. Note 24: Wilson: *Edgecombe, Nash, Wayne, Johnston. Note 25: Yancey: *Burke, Buncombe. Note 26: Alleghany: *Ashe. Note 27: Haywood: *Buncombe. Note 28: Henderson: *Buncombe. Note 29: Person: Caswell. Note 30: Clay: Cherokee. Note 31: Graham: Cherokee. Note 32: Harnett: Cumberland. Note 33: Macon: Haywood.

Note 34: Catawba: Lincoln. Note 35: Gaston: Lincoln. Note 36: Cabarrus: Mecklenburg.
Note 37: Stanly: Montgomery. Note 38: Pender: New Hanover. Note 39: Alamance: Orange.
Note 40: Durham: Orange, Wake. Note 41: Scotland: Richmond. Note 42: Davidson: Rowan. Note 43: Davie: Rowan.Note 44: Forsyth: Stokes. Note 45: Yadkin: Surry.
Note 46: Washington: Tyrrell.Note 47: Ashe: Wilkes. Part III. Population of Counties, Earliest Census to 1990The 1840 population of Person County, NC should be 9,790. The 1840 population of Perquimans County, NC should be 7,346.

This dataset provides an in-depth look at global demographic trends spanning a century, offering detailed insights into population growth, age-gender structure, and dependency changes over time. It is designed to support a wide range of analytical applications, from academic research in demographics to policy-making and socio-economic planning.

In 1800, the region of present-day Syria had a population of approximately 1.25 million people. Growth was relatively slow during the 19th century, and the population reached just over two million by the time of the First World War in 1914. However, population would begin to grow more rapidly following the beginning of French occupation in 1920, and by the time Syria achieved independence from France in 1946, the population would be just over 3.2 million. Following the country’s independence, Syria would begin experiencing exponential growth, the result of significant economic growth from the country’s growing petroleum exports.

However, the 21st century would see a sharp reversal of Syria’s exponential population growth, with the beginning of the Syrian Civil War after widespread anti-government protests in 2011. After peaking at 21.4 million people in 2010, Syria’s population would see a rapid decline during the civil war, as widespread conflict, massacres, and destruction would lead to significant fatalities and a mass exodus of refugees from the country, with several million migrating to neighboring Turkey, Lebanon, and Jordan, and another several hundred thousand ultimately migrating to the European Union. As a result, the population of the country has declined greatly, falling from over 21 million in 2010 to just under 17 million by 2018. However, as the fighting has gradually decreased in intensity and refugee rates have levelled off, the population of Syria has slowly began to grow again. In 2020, Syria is estimated to have a population of 17.5 million people.

This database provides population data since 1876 to the last update for the municipalities of Maine-et-Loire and the neighbouring departments. Census results since 2006 compare correctly with each other only over periods of at least 5 years apart. The data are distributed according to the geography in force as of 1 January 2020. Sources Insee

This table contains 2 series, with data for years 1852 - 1977 (not all combinations necessarily have data for all years). This table contains data described by the following dimensions (Not all combinations are available): Unit of measure (1 items: Persons ...) Geography (1 items: Canada ...) Estimates (2 items: Estimated population; Immigrant arrivals ...).

This line chart displays population (people) by date using the aggregation sum in Ireland. The data is about countries per year.