This is a tiled collection of the 3D Elevation Program (3DEP) and is 1 arc-second (approximately 30 m) resolution. The elevations in this Digital Elevation Model (DEM) represent the topographic bare-earth surface. The 3DEP data holdings serve as the elevation layer of The National Map, and provide foundational elevation information for earth science studies and mapping applications in the United States. Scientists and resource managers use 3DEP data for hydrologic modeling, resource monitoring, mapping and visualization, and many other applications. The seamless 1 arc-second DEM layers are derived from diverse source data that are processed to a common coordinate system and unit of vertical measure. These data are distributed in geographic coordinates in units of decimal degrees, and in conformance with the North American Datum of 1983 (NAD 83). All elevation values are in meters and, over the continental United States, are referenced to the North American Vertical Datum of 1988 ( ...

National Monuments Service - Archaeological Survey of Ireland. Published by Department of Housing, Local Government and Heritage. Available under the license Creative Commons Attribution 4.0 (CC-BY-4.0).This Archaeological Survey of Ireland dataset is published from the database of the National Monuments Service Sites and Monuments Record (SMR). This dataset also can be viewed and interrogated through the online Historic Environment Viewer: https://heritagedata.maps.arcgis.com/apps/webappviewer/index.html?id=0c9eb9575b544081b0d296436d8f60f8

A Sites and Monuments Record (SMR) was issued for all counties in the State between 1984 and 1992. The SMR is a manual containing a numbered list of certain and possible monuments accompanied by 6-inch Ordnance Survey maps (at a reduced scale). The SMR formed the basis for issuing the Record of Monuments and Places (RMP) - the statutory list of recorded monuments established under Section 12 of the National Monuments (Amendment) Act 1994. The RMP was issued for each county between 1995 and 1998 in a similar format to the existing SMR. The RMP differs from the earlier lists in that, as defined in the Act, only monuments with known locations or places where there are believed to be monuments are included.

The large Archaeological Survey of Ireland archive and supporting database are managed by the National Monuments Service and the records are continually updated and supplemented as additional monuments are discovered. On the Historic Environment viewer an area around each monument has been shaded, the scale of which varies with the class of monument. This area does not define the extent of the monument, nor does it define a buffer area beyond which ground disturbance should not take place – it merely identifies an area of land within which it is expected that the monument will be located. It is not a constraint area for screening – such must be set by the relevant authority who requires screening for their own purposes. This data has been released for download as Open Data under the DPER Open Data Strategy and is licensed for re-use under the Creative Commons Attribution 4.0 International licence. http://creativecommons.org/licenses/by/4.0

Please note that the centre point of each record is not indicative of the geographic extent of the monument. The existing point centroids were digitised relative to the OSI 6-inch mapping and the move from this older IG-referenced series to the larger-scale ITM mapping will necessitate revisions. The accuracy of the derived ITM co-ordinates is limited to the OS 6-inch scale and errors may ensue should the user apply the co-ordinates to larger scale maps. Records that do not refer to 'monuments' are designated 'Redundant record' and are retained in the archive as they may relate to features that were once considered to be monuments but which on investigation proved otherwise. Redundant records may also refer to duplicate records or errors in the data structure of the Archaeological Survey of Ireland.

This dataset is provided for re-use in a number of ways and the technical options are outlined below. For a live and current view of the data, please use the web services or the data extract tool in the Historic Environment Viewer. The National Monuments Service also provide an Open Data snapshot of its national dataset in CSV as a bulk data download. Users should consult the National Monument Service website https://www.archaeology.ie/ for further information and guidance on the National Monument Act(s) and the legal significance of this dataset.

Open Data Bulk Data Downloads (version date: 23/08/2023)

The Sites and Monuments Record (SMR) is provided as a national download in Comma Separated Value (CSV) format. This format can be easily integrated into a number of software clients for re-use and analysis. The Longitude and Latitude coordinates are also provided to aid its re-use in web mapping systems, however, the ITM easting/northings coordinates should be quoted for official purposes. ERSI Shapefiles of the SMR points and SMRZone polygons are also available The SMRZones represent an area around each monument, the scale of which varies with the class of monument. This area does not define the extent of the monument, nor does it define a buffer area beyond which ground disturbance should not take place – it merely identifies an area of land within which it is expected that the monument will be located. It is not a constraint area for screening – such must be set by the relevant authority who requires screening for their own purposes.

GIS Web Service APIs (live views):

For users with access to GIS software please note that the Archaeological Survey of Ireland data is also available spatial data web services. By accessing and consuming the web service users are deemed to have accepted the Terms and Conditions. The web services are available at the URL endpoints advertised below:

SMR; https://services-eu1.arcgis.com/HyjXgkV6KGMSF3jt/arcgis/rest/services/SMROpenData/FeatureServer

SMRZone; https://services-eu1.arcgis.com/HyjXgkV6KGMSF3jt/arcgis/rest/services/SMRZoneOpenData/FeatureServer

Historic Environment Viewer - Query Tool

The "Query" tool can alternatively be used to selectively filter and download the data represented in the Historic Environment Viewer. The instructions for using this tool in the Historic Environment Viewer are detailed in the associated Help file: https://www.archaeology.ie/sites/default/files/media/pdf/HEV_UserGuide_v01.pdf...

Culminating more than four years of processing data, NASA and the National Geospatial-Intelligence Agency (NGA) have completed Earth's most extensive global topographic map. The mission is a collaboration among NASA, NGA, and the German and Italian space agencies. For 11 days in February 2000, the space shuttle Endeavour conducted the Shuttle Radar Topography Mission (SRTM) using C-Band and X-Band interferometric synthetic aperture radars to acquire topographic data over 80% of the Earth's land mass, creating the first-ever near-global data set of land elevations. This data was used to produce topographic maps (digital elevation maps) 30 times as precise as the best global maps used today. The SRTM system gathered data at the rate of 40,000 per minute over land. They reveal for the first time large, detailed swaths of Earth's topography previously obscured by persistent cloudiness. The data will benefit scientists, engineers, government agencies and the public with an ever-growing array of uses. The SRTM radar system mapped Earth from 56 degrees south to 60 degrees north of the equator. The resolution of the publicly available data is three arc-seconds (1/1,200th of a degree of latitude and longitude, about 295 feet, at Earth's equator). The final data release covers Australia and New Zealand in unprecedented uniform detail. It also covers more than 1,000 islands comprising much of Polynesia and Melanesia in the South Pacific, as well as islands in the South Indian and Atlantic oceans. SRTM data are being used for applications ranging from land use planning to "virtual" Earth exploration. Currently, the mission's homepage "http://www.jpl.nasa.gov/srtm" provides direct access to recently obtained earth images. The Shuttle Radar Topography Mission C-band data for North America and South America are available to the public. A list of complete public data set is available at "http://www2.jpl.nasa.gov/srtm/dataprod.htm" The data specifications are within the following parameters: 30-meter X 30-meter spatial sampling with 16 meter absolute vertical height accuracy, 10-meter relative vertical height accuracy, and 20-meter absolute horizontal circular accuracy. From the JPL Mission Products Summary, "http://www.jpl.nasa.gov/srtm/dataprelimdescriptions.html". The primary products of the SRTM mission are the digital elevation maps of most of the Earth's surface. Visualized images of these maps are available for viewing online. Below you will find descriptions of the types of images that are being generated:

• Radar Image
• Radar Image with Color as Height
• Radar Image with Color Wrapped Fringes
  -Shaded Relief
• Perspective View with B/W Radar Image Overlaid
• Perspective View with Radar Image Overlaid, Color as Height
• Perspective View of Shaded Relief
• Perspective View with Landsat or other Image Overlaid
• Contour Map - B/W with Contour Lines
• Stereo Pair
• Anaglypgh

The SRTM radar contained two types of antenna panels, C-band and X-band. The near-global topographic maps of Earth called Digital Elevation Models (DEMs) are made from the C-band radar data. These data were processed at the Jet Propulsion Laboratory and are being distributed through the United States Geological Survey's EROS Data Center. Data from the X-band radar are used to create slightly higher resolution DEMs but without the global coverage of the C-band radar. The SRTM X-band radar data are being processed and distributed by the German Aerospace Center, DLR.

This Archaeological Survey of Ireland dataset is published from the database of the National Monuments Service Sites and Monuments Record (SMR). This dataset also can be viewed and interrogated through the online Historic Environment Viewer. A Sites and Monuments Record (SMR) was issued for all counties in the State between 1984 and 1992. The SMR is a manual containing a numbered list of certain and possible monuments accompanied by 6-inch Ordnance Survey maps (at a reduced scale). The SMR formed the basis for issuing the Record of Monuments and Places (RMP) - the statutory list of recorded monuments established under Section 12 of the National Monuments (Amendment) Act 1994. The RMP was issued for each county between 1995 and 1998 in a similar format to the existing SMR. The RMP differs from the earlier lists in that, as defined in the Act, only monuments with known locations or places where there are believed to be monuments are included. The large Archaeological Survey of Ireland archive and supporting database are managed by the National Monuments Service and the records are continually updated and supplemented as additional monuments are discovered. On the Historic Environment viewer an area around each monument has been shaded, the scale of which varies with the class of monument. This area does not define the extent of the monument, nor does it define a buffer area beyond which ground disturbance should not take place – it merely identifies an area of land within which it is expected that the monument will be located. It is not a constraint area for screening – such must be set by the relevant authority who requires screening for their own purposes. This data has been released for download as Open Data under the DPER Open Data Strategy and is licensed for re-use under the Creative Commons Attribution 4.0 International licence. https://creativecommons.org/licenses/by/4.0/ Please note that the centre point of each record is not indicative of the geographic extent of the monument. The existing point centroids were digitised relative to the OSI 6-inch mapping and the move from this older IG-referenced series to the larger-scale ITM mapping will necessitate revisions. The accuracy of the derived ITM co-ordinates is limited to the OS 6-inch scale and errors may ensue should the user apply the co-ordinates to larger scale maps. Records that do not refer to 'monuments' are designated 'Redundant record' and are retained in the archive as they may relate to features that were once considered to be monuments but which on investigation proved otherwise. Redundant records may also refer to duplicate records or errors in the data structure of the Archaeological Survey of Ireland. This dataset is provided for re-use in a number of ways and the technical options are outlined below. For a live and current view of the data, please use the web services or the data extract tool in the Historic Environment Viewer. The National Monuments Service also provide an Open Data snapshot of its national dataset in CSV as a bulk data download. Users should consult the National Monument Service website https://www.archaeology.ie/ for further information and guidance on the National Monument Act(s) and the legal significance of this dataset. Open Data Bulk Data Downloads (version date: 23/06/2023) The Sites and Monuments Record (SMR) is provided as a national download in Comma Separated Value (CSV) format. This format can be easily integrated into a number of software clients for re-use and analysis. The Longitude and Latitude coordinates are also provided to aid its re-use in web mapping systems, however, the ITM easting/northings coordinates should be quoted for official purposes. For a live and current view of the data, please use the web services or the query tool in the Historic Environment Viewer. ESRI Shapefiles of the SMR points and SMRZone polygons are also available. The SMRZones represent an area around each monument, the scale of which varies with the class of monument. This area does not define the extent of the monument, nor does it define a buffer area beyond which ground disturbance should not take place – it merely identifies an area of land within which it is expected that the monument will be located. It is not a constraint area for screening – such must be set by the relevant authority who requires screening for their own purposes.

This is a 1 arc-second (approximately 30 m) resolution tiled collection of the 3D Elevation Program (3DEP) seamless data products . 3DEP data serve as the elevation layer of The National Map, and provide basic elevation information for Earth science studies and mapping applications in the United States. Scientists and resource managers use 3DEP data for global change research, hydrologic modeling, resource monitoring, mapping and visualization, and many other applications. 3DEP data compose an elevation dataset that consists of seamless layers and a high resolution layer. Each of these layers consists of the best available raster elevation data of the conterminous United States, Alaska, Hawaii, territorial islands, Mexico and Canada. 3DEP data are updated continually as new data become available. Seamless 3DEP data are derived from diverse source data that are processed to a common coordinate system and unit of vertical measure. These data are distributed in geographic coordinates in units of decimal degrees, and in conformance with the North American Datum of 1983 (NAD 83). All elevation values are in meters and, over the conterminous United States, are referenced to the North American Vertical Datum of 1988 (NAVD 88). The vertical reference will vary in other areas. The elevations in these DEMs represent the topographic bare-earth surface. All 3DEP products are public domain.

This dataset includes data over Canada and Mexico as part of an international, interagency collaboration with the Mexico's National Institute of Statistics and Geography (INEGI) and the Natural Resources Canada (NRCAN) Centre for Topographic Information-Sherbrook, Ottawa. For more details on the data provenance of this dataset, visit here and here.

Click here for a broad overview of this dataset

This collection of the 3D Elevation Program (3DEP) is at 1/3 arc-second (approximately 10 m) resolution. The 3DEP data holdings serve as the elevation layer of The National Map, and provide foundational elevation information for earth science studies and mapping applications in the United States. Scientists and resource managers use 3DEP data for hydrologic modeling, resource monitoring, mapping and visualization, and many other applications. The elevations in this DEM represent the topographic bare-earth surface. The seamless 1/3 arc-second DEM layers are derived from diverse source data that are processed to a common coordinate system and unit of vertical measure. These data are distributed in geographic coordinates in units of decimal degrees, and in conformance with the North American Datum of 1983 (NAD 83). All elevation values are in meters and, over the continental United States, are referenced to the North American Vertical Datum of 1988 (NAVD88). The vertical reference will vary in other areas. The seamless 1/3 arc-second DEM layer provides coverage of the conterminous United States, Hawaii, Puerto Rico, other territorial islands, and in limited areas of Alaska. These seamless DEMs were referred to as the National Elevation Dataset (NED) from about 2000 through 2015 at which time they became the seamless DEM layers under the 3DEP program and the NED name and system were retired. All 3DEP products are public domain.