Provides estimates of changes in house prices in each of the eight capital cities of Australia. The information is presented in the form of price indexes constructed separately for established …Show full descriptionProvides estimates of changes in house prices in each of the eight capital cities of Australia. The information is presented in the form of price indexes constructed separately for established houses and for project homes.

Map and 2014 data from Australian Bureau of Statistics (ABS) Land Account: South Australia, Experimental Estimates, 2006-2011 (cat. No. 4609.4.55.001) http://www.abs.gov.au/ausstats/abs@.nsf/Latestpr…Show full descriptionMap and 2014 data from Australian Bureau of Statistics (ABS) Land Account: South Australia, Experimental Estimates, 2006-2011 (cat. No. 4609.4.55.001) http://www.abs.gov.au/ausstats/abs@.nsf/Latestproducts/4609.4.55.001Feature Article1002006 - 2011?opendocument&tabname=Summary&prodno=4609.4.55.001&issue=2006 - 2011&num=&view= Data tables list 2011 SA1s within the 2011 Adelaide Urban Centre/Locality with property area calculations for specified time periods (1990 - 2014), as well corresponding mean building size and mean building size to property area ratio based on 2014 Valuer-General data. The VG data is from a single point in time and contains information for properties as of 2014. (eg. including extensions/renovations or where subdivision has been undertaken, which would include any increases in floor area or decreases in land area that occurred as a result of these). The VG oversee valuations for State Government property transactions and the making and return of council rating valuations. The primary data items used include Land Use, Property Area, Equivalent Main Area and Year built. "Equivalent main area" is the total area under the main roof excluding area of eg. carports, garages, verandahs etc. rather than the building footprint. Only landuse codes with a classification of "Private" were included in the analysis. State Office Land Use Classification 2007 was used to analyse Valuer General data. Only records classified as Single Unit Houses (land use code 1100-1119) were included in the analysis (80% of VG records), but this will include multistory houses. Because the area calculation for multistory houses could exceed the size of the land parcel, a "MeanAreaRatio_adj field has been included - Where the Pre1980_MeanAreaRatio for a property is greater than 100.0, then this has been adjusted down to 100.0 The analysis was restricted to Private Single Unit Houses (excluding multiple unit dwellings and commercial buildings) in an effort to enable the data to be used to understand residential backyard sizes and how these have changed over time. Note that although the figure heading notes a year range of 1990-2014 the original output dataset for Statistical Area Level 1 s(SA1) included records with a null year field (326 records) as well as records dating back to 1838. Map relates to Figure BLT24 in the Built environment theme of the 2016 State of the Environment Report, available at http://www.soe.environment.gov.au The map service can be viewed at http://soe.terria.io/#share=s-3nePG4Ns8PitiB0Qo1SBf6SYwc1 Downloadable spatial data also available below.

Map and 2010 data from Australian Bureau of Statistics (ABS) Land Account: South Australia, Experimental Estimates, 2006-2011 (cat. No. 4609.4.55.001) http://www.abs.gov.au/ausstats/abs@.nsf/Latestproducts/4609.4.55.001Feature%20Article1002006%20-%202011?opendocument&tabname=Summary&prodno=4609.4.55.001&issue=2006%20-%202011&num=&view=

Data tables list 2011 SA1s within the 2011 Adelaide Urban Centre/Locality with property area calculations for specified time periods (1990 - 2014), as well corresponding mean building size and mean building size to property area ratio based on 2014 Valuer-General data. The VG data is from a single point in time and contains information for properties as of 2014. (eg. including extensions/renovations or where subdivision has been undertaken, which would include any increases in floor area or decreases in land area that occurred as a result of these). The VG oversee valuations for State Government property transactions and the making and return of council rating valuations. The primary data items used include Land Use, Property Area, Equivalent Main Area and Year built. "Equivalent main area" is the total area under the main roof excluding area of eg. carports, garages, verandahs etc. rather than the building footprint. Only landuse codes with a classification of "Private" were included in the analysis. State Office Land Use Classification 2007 was used to analyse Valuer General data. Only records classified as Single Unit Houses (land use code 1100-1119) were included in the analysis (80% of VG records), but this will include multistory houses. Because the area calculation for multistory houses could exceed the size of the land parcel, a "MeanAreaRatio_adj field has been included - Where the Pre1980_MeanAreaRatio for a property is greater than 100.0, then this has been adjusted down to 100.0 The analysis was restricted to Private Single Unit Houses (excluding multiple unit dwellings and commercial buildings) in an effort to enable the data to be used to understand residential backyard sizes and how these have changed over time. Note that although the figure heading notes a year range of 1990-2014 the original output dataset for Statistical Area Level 1 s(SA1) included records with a null year field (326 records) as well as records dating back to 1838.

Map relates to Figure BLT24 in the Built environment theme of the 2016 State of the Environment Report, available at http://www.soe.environment.gov.au

The map service can be viewed at http://soe.terria.io/#share=s-sB5VcuCdJXg9TdCi3nz3FT0eojG

Downloadable spatial data also available below.

This is a data set of built environment policy instruments relevant to the state of Victoria, Australia. The instruments are categorised against a built environment policy framework developed by Hurlimann et al (2024 - see reference details below) which consists of: a policy instrument typology (strategies, laws, regulations, guidelines, voluntary instruments and programs), and a built environment policy setting (governance level, sector, property type, life stage, timeframe). Local (City of Melbourne), national (Australia) and international built environment policy instruments are also included.This data file relates to open access journal article: Hurlimann, A., March, A., Bush, J., Moosavi., S., Browne, G., Warren-Myers, G., (2024) 'Climate change transformation in built environments - A policy instrument framework. Urban Climate; doi.org/10.1016/j.uclim.2023.101771

This dataset presents details of buildings works approved in Australia for the 2014-2015 financial year.The data has been aggregated and presented by Statistical Area Level 3 (SA3) 2011 boundaries.

Statistics of building work approved are compiled from: permits issued by local government authorities and other principal certifying authorities; contracts let or day labour work authorised by commonwealth, state, semi-government and local government authorities; and major building approvals in areas not subject to normal administrative approval e.g. building on remote mine sites.

The scope of the collection comprises the following: construction of new buildings; alterations and additions to existing buildings; approved non-structural renovation and refurbishment work; and approved installation of integral building fixtures. The statistics include all approved residential building valued at $10,000 or more and all approved non-residential building valued at $50,000 or more.

For more information please visit the Australian Bureau of Statistics (ABS) Explanatory Notes.

• AURIN has spatially enabled the original data from the ABS.

• The data has been sourced from the June 2016 release.

This dataset presents details of buildings works approved in Australia for the 2016-2017 financial year. The data has been aggregated and presented by Statistical Area Level 2 (SA2) 2016 boundaries.

Statistics of building work approved are compiled from: permits issued by local government authorities and other principal certifying authorities; contracts let or day labour work authorised by commonwealth, state, semi-government and local government authorities; and major building approvals in areas not subject to normal administrative approval e.g. building on remote mine sites.

The scope of the collection comprises the following: construction of new buildings; alterations and additions to existing buildings; approved non-structural renovation and refurbishment work; and approved installation of integral building fixtures. The statistics include all approved residential building valued at $10,000 or more and all approved non-residential building valued at $50,000 or more.

For more information please visit the Australian Bureau of Statistics (ABS) Explanatory Notes.

• AURIN has spatially enabled the original data from the ABS.

• The data has been sourced from the June 2018 release.

• Data for the Northern Territory during the months of January, February and March 2017 were kept confidential.

This dataset presents details of buildings works approved in Australia for the 2011-2012 financial year. The data has been aggregated and presented by Greater Capital City Statistical Areas (GCCSA) 2011 boundaries.

Statistics of building work approved are compiled from: permits issued by local government authorities and other principal certifying authorities; contracts let or day labour work authorised by commonwealth, state, semi-government and local government authorities; and major building approvals in areas not subject to normal administrative approval e.g. building on remote mine sites.

The scope of the collection comprises the following: construction of new buildings; alterations and additions to existing buildings; approved non-structural renovation and refurbishment work; and approved installation of integral building fixtures. The statistics include all approved residential building valued at $10,000 or more and all approved non-residential building valued at $50,000 or more.

For more information please visit the Australian Bureau of Statistics (ABS) Explanatory Notes.

• AURIN has spatially enabled the original data from the ABS.

• The data has been sourced from the June 2013 release.