Gasoline Prices in Mexico increased to 1.25 USD/Liter in June from 1.22 USD/Liter in May of 2025. This dataset provides the latest reported value for - Mexico Gasoline Prices - plus previous releases, historical high and low, short-term forecast and long-term prediction, economic calendar, survey consensus and news.

Mexico: Gasoline prices at the pump, in dollars per liter: The latest value from 2016 is 0.73 dollars, a decline from 1.03 dollars in 2014. In comparison, the world average is 0.98 dollars, based on data from 165 countries. Historically, the average for Mexico from 1992 to 2016 is 0.65 dollars. The minimum value, 0.32 dollars, was reached in 1995 while the maximum of 1.03 dollars was recorded in 2014.

?Interest in the Gulf of Mexico has been greatly accelerated in the past decade, and there is much evidence that this interest will continue, which should result in the eventual solution of many of the present riddles of the Gulf of Mexico. (Lynch, 1954), p. 83 When S.A. Lynch wrote these words half a century ago, gas hydrates were not anticipated as one of the ?riddles? of the Gulf of Mexico (Gulf). Gas hydrates were not predicted to occur in the Gulf until 1979, when key indicators in seismic data suggested their presence (Shipley and others, 1979a). Samples of these elusive materials were not discovered in the Gulf until about 1983, when hydrate was recovered in cores and dredges in the Green Canyon area (Brooks and others, 1984; Kennicutt and others, 1985). Since these first discoveries in the Gulf, studies have expanded rapidly: now the Gulf is one of the best studied natural laboratories for understanding sea-floor gas hydrate mounds and marine gas hydrate occurrence within a leaky world-class petroleum system.

This dataset provides values for GASOLINE PRICES reported in several countries. The data includes current values, previous releases, historical highs and record lows, release frequency, reported unit and currency.

This dataset is a compilation of available oil and gas pipeline data and is maintained by BSEE. Pipelines are used to transport and monitor oil and/or gas from wells within the outer continental shelf (OCS) to resource collection locations. Currently, pipelines managed by BSEE are found in Gulf of Mexico and southern California waters.

© MarineCadastre.gov This layer is a component of BOEMRE Layers.

This Map Service contains many of the primary data types created by both the Bureau of Ocean Energy Management (BOEM) and the Bureau of Safety and Environmental Enforcement (BSEE) within the Department of Interior (DOI) for the purpose of managing offshore federal real estate leases for oil, gas, minerals, renewable energy, sand and gravel. These data layers are being made available as REST mapping services for the purpose of web viewing and map overlay viewing in GIS systems. Due to re-projection issues which occur when converting multiple UTM zone data to a single national or regional projected space, and line type changes that occur when converting from UTM to geographic projections, these data layers should not be used for official or legal purposes. Only the original data found within BOEM/BSEE’s official internal database, federal register notices or official paper or pdf map products may be considered as the official information or mapping products used by BOEM or BSEE. A variety of data layers are represented within this REST service are described further below. These and other cadastre information the BOEM and BSEE produces are generated in accordance with 30 Code of Federal Regulations (CFR) 256.8 to support Federal land ownership and mineral resource management.

For more information – Contact: Branch Chief, Mapping and Boundary Branch, BOEM, 381 Elden Street, Herndon, VA 20170. Telephone (703) 787-1312; Email: mapping.boundary.branch@boem.gov

The REST services for National Level Data can be found here: http://gis.boemre.gov/arcgis/rest/services/BOEM_BSEE/MMC_Layers/MapServer

REST services for regional level data can be found by clicking on the region of interest from the following URL: http://gis.boemre.gov/arcgis/rest/services/BOEM_BSEE

Individual Regional Data or in depth metadata for download can be obtained in ESRI Shape file format by clicking on the region of interest from the following URL: http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx

Currently the following layers are available from this REST location:

OCS Drilling Platforms -Locations of structures at and beneath the water surface used for the purpose of exploration and resource extraction. Only platforms in federal Outer Continental Shelf (OCS) waters are included. A database of platforms and rigs is maintained by BSEE.

OCS Oil and Natural Gas Wells -Existing wells drilled for exploration or extraction of oil and/or gas products. Additional information includes the lease number, well name, spud date, the well class, surface area/block number, and statistics on well status summary. Only wells found in federal Outer Continental Shelf (OCS) waters are included. Wells information is updated daily. Additional files are available on well completions and well tests. A database of wells is maintained by BSEE.

OCS Oil & Gas Pipelines -This dataset is a compilation of available oil and gas pipeline data and is maintained by BSEE. Pipelines are used to transport and monitor oil and/or gas from wells within the outer continental shelf (OCS) to resource collection locations. Currently, pipelines managed by BSEE are found in Gulf of Mexico and southern California waters.

Unofficial State Lateral Boundaries - The approximate location of the boundary between two states seaward of the coastline and terminating at the Submerged Lands Act Boundary. Because most State boundary locations have not been officially described beyond the coast, are disputed between states or in some cases the coastal land boundary description is not available, these lines serve as an approximation that was used to determine a starting point for creation of BOEM’s OCS Administrative Boundaries. GIS files are not available for this layer due to its unofficial status.

BOEM OCS Administrative Boundaries - Outer Continental Shelf (OCS) Administrative Boundaries Extending from the Submerged Lands Act Boundary seaward to the Limit of the United States OCS (The U.S. 200 nautical mile Limit, or other marine boundary)For additional details please see the January 3, 2006 Federal Register Notice.

BOEM Limit of OCSLA ‘8(g)’ zone - The Outer Continental Shelf Lands Act '8(g) Zone' lies between the Submerged Lands Act (SLA) boundary line and a line projected 3 nautical miles seaward of the SLA boundary line. Within this zone, oil and gas revenues are shared with the coastal state(s). The official version of the ‘8(g)’ Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction described below.

Submerged Lands Act Boundary - The SLA boundary defines the seaward limit of a state's submerged lands and the landward boundary of federally managed OCS lands. The official version of the SLA Boundaries can only be found on the BOEM Official Protraction Diagrams (OPDs) or Supplemental Official Protraction Diagrams described below.

Atlantic Wildlife Survey Tracklines(2005-2012) - These data depict tracklines of wildlife surveys conducted in the Mid-Atlantic region since 2005. The tracklines are comprised of aerial and shipboard surveys. These data are intended to be used as a working compendium to inform the diverse number of groups that conduct surveys in the Mid-Atlantic region.The tracklines as depicted in this dataset have been derived from source tracklines and transects. The tracklines have been simplified (modified from their original form) due to the large size of the Mid-Atlantic region and the limited ability to map all areas simultaneously.The tracklines are to be used as a general reference and should not be considered definitive or authoritative. This data can be downloaded from http://www.boem.gov/uploadedFiles/BOEM/Renewable_Energy_Program/Mapping_and_Data/ATL_WILDLIFE_SURVEYS.zip

BOEM OCS Protraction Diagrams & Leasing Maps - This data set contains a national scale spatial footprint of the outer boundaries of the Bureau of Ocean Energy Management’s (BOEM’s) Official Protraction Diagrams (OPDs) and Leasing Maps (LMs). It is updated as needed. OPDs and LMs are mapping products produced and used by the BOEM to delimit areas available for potential offshore mineral leases, determine the State/Federal offshore boundaries, and determine the limits of revenue sharing and other boundaries to be considered for leasing offshore waters. This dataset shows only the outline of the maps that are available from BOEM.Only the most recently published paper or pdf versions of the OPDs or LMs should be used for official or legal purposes. The pdf maps can be found by going to the following link and selecting the appropriate region of interest. http://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Index.aspx Both OPDs and LMs are further subdivided into individual Outer Continental Shelf(OCS) blocks which are available as a separate layer. Some OCS blocks that also contain other boundary information are known as Supplemental Official Block Diagrams (SOBDs.) Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: http://www.boemre.gov/itd/pubs/1999/99-0006.PDF Also see the metadata for each of the individual GIS data layers available for download. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.

BOEM OCS Lease Blocks - Outer Continental Shelf (OCS) lease blocks serve as the legal definition for BOEM offshore boundary coordinates used to define small geographic areas within an Official Protraction Diagram (OPD) for leasing and administrative purposes. OCS blocks relate back to individual Official Protraction Diagrams and are not uniquely numbered. Only the most recently published paper or pdf

2005 GOM JIP - LEG I Core Recovery Log offers information on the cores recovered during this expedition and is the official recovery log from the field phase of that cruise.
The primary objective of the Gulf of Mexico Hydrates Joint Industry Project (JIP) was to develop technology and data to assist in the characterization of naturally occurring gas hydrates in the deepwater Gulf of Mexico. Other objectives of this project were to better understand how natural gas hydrates can affect seafloor stability, to gather data that can be used to study climate change, and to determine how the results of this project can be used to assess if and how gas hydrates act as a trapping mechanism for shallow oil or gas reservoirs. More information about this cruise is available here https://edx.netl.doe.gov/dataset/gulf-of-mexico-gas-hydrates-joint-industry-project-jip-characterizing-natural-gas-hydrates-in-the

The main reason for conducting the research described in this presentation is to collect data, generate protocols, develop knowledge and promote safety in the future development of oil and gas fields in the deep water Gulf of Mexico (GOM). To accomplish this main objective, we have developed a comprehensive research plan that is divided into two phases, with an optional third phase, if warranted. Phase I began in 2001 and will last through the first quarter of 2003. During Phase I, we will hold workshops, collect and analyze data, develop protocols, and plan a core and well log data collection effort that will be conducted during Phase II of this project. A data collection workshop was held on March 14-15, 2002. The goals of the workshop were to develop a clear understanding of what is known and available about naturally occurring hydrates in the GOM, determine the additional data needed to meet the goals of the Joint Industry Project (JIP), and to identify individuals and institutions actively involved in projects related to this JIP. Additional workshops are planned for May 9-10, 2002, to develop details for modeling and drilling needs. The Modeling Workshop will be used to determine what data are required by geoscientists and engineers for their models. The Drilling and Coring Workshop will be conducted concurrently with the Modeling Workshop. Areas of interest to this workshop are how to drill through naturally occurring gas hydrates, how to core these hydrates, and how to handle, transport and test these core samples. We will also encourage the development of gas hydrate sensors, develop well bore stability models, and improve seismic data acquisition and analyses of the formations near the seabed floor in deep water. We will also begin laboratory analyses of the kinetic, thermodynamic, physical and chemical properties of core samples that are saturated or partially saturated with gas hydrates. All of these measurements will improve our ability to measure the properties of gas hydrates using signals from seismic, drilling, MWD, logging and coring operations in future field tests. One important deliverable from Phase I will be a recommendation concerning the location for drilling test wells in Phase II. Phase II will primarily consist of drilling wells in two areas in the deep water GOM for the primary purpose of collecting drilling, MWD, logging and coring data. Phase II will occur during 2003 and 2005. We will evaluate all data in detail and integrate the data with existing data and seismic information. Two wells will be drilled in an area that should contain a large volume of naturally occurring gas hydrates. The third well will be drilled nearby, but in an area that does not contain any gas hydrates. Ideally, the data sets from the two areas will allow us to determine the effects of gas hydrates in the pore space of the rocks upon the responses from seismic data, drilling data, MWD data, open hole logging data, core data and any test data we can acquire. The results from Phases I and II will be evaluated. If warranted by the results, a Phase III project will be proposed. The Phase III project will begin in 2005 and will conclude in 2007. Phase III will involve drilling seven additional data collection wells in the deep water GOM.