In past 24 hours, India, Asia had 68 new cases, N/A deaths and N/A recoveries.

Based on a comparison of coronavirus deaths in 210 countries relative to their population, Peru had the most losses to COVID-19 up until July 13, 2022. As of the same date, the virus had infected over 557.8 million people worldwide, and the number of deaths had totaled more than 6.3 million. Note, however, that COVID-19 test rates can vary per country. Additionally, big differences show up between countries when combining the number of deaths against confirmed COVID-19 cases. The source seemingly does not differentiate between "the Wuhan strain" (2019-nCOV) of COVID-19, "the Kent mutation" (B.1.1.7) that appeared in the UK in late 2020, the 2021 Delta variant (B.1.617.2) from India or the Omicron variant (B.1.1.529) from South Africa.

The difficulties of death figures

This table aims to provide a complete picture on the topic, but it very much relies on data that has become more difficult to compare. As the coronavirus pandemic developed across the world, countries already used different methods to count fatalities, and they sometimes changed them during the course of the pandemic. On April 16, for example, the Chinese city of Wuhan added a 50 percent increase in their death figures to account for community deaths. These deaths occurred outside of hospitals and went unaccounted for so far. The state of New York did something similar two days before, revising their figures with 3,700 new deaths as they started to include “assumed” coronavirus victims. The United Kingdom started counting deaths in care homes and private households on April 29, adjusting their number with about 5,000 new deaths (which were corrected lowered again by the same amount on August 18). This makes an already difficult comparison even more difficult. Belgium, for example, counts suspected coronavirus deaths in their figures, whereas other countries have not done that (yet). This means two things. First, it could have a big impact on both current as well as future figures. On April 16 already, UK health experts stated that if their numbers were corrected for community deaths like in Wuhan, the UK number would change from 205 to “above 300”. This is exactly what happened two weeks later. Second, it is difficult to pinpoint exactly which countries already have “revised” numbers (like Belgium, Wuhan or New York) and which ones do not. One work-around could be to look at (freely accessible) timelines that track the reported daily increase of deaths in certain countries. Several of these are available on our platform, such as for Belgium, Italy and Sweden. A sudden large increase might be an indicator that the domestic sources changed their methodology.

Where are these numbers coming from?

The numbers shown here were collected by Johns Hopkins University, a source that manually checks the data with domestic health authorities. For the majority of countries, this is from national authorities. In some cases, like China, the United States, Canada or Australia, city reports or other various state authorities were consulted. In this statistic, these separately reported numbers were put together. For more information or other freely accessible content, please visit our dedicated Facts and Figures page.

Context

The first COVID-19 case was reported on 30 January in a student who arrived in Kerala state from Wuhan. Then 2 more cases were reported in the next 2 days in Kerala again. For almost a month, no new cases were reported in India, however, on 8th March, five new cases of coronavirus in Kerala were again reported and since then the cases have been rising affecting 14 states. Here is the Data of of Covid-19 patients in India up till 3rd May 2020

Acknowledgements

https://www.mohfw.gov.in/ https://www.worldometers.info/coronavirus/country/india/

PC: Image by PANKAJ YADAV from Pixabay

Context

What Is COVID-19?

A coronavirus is a kind of common virus that causes an infection in your nose, sinuses, or upper throat. Most coronaviruses aren't dangerous.

COVID-19 is a disease that can cause what doctors call a respiratory tract infection. It can affect your upper respiratory tract (sinuses, nose, and throat) or lower respiratory tract (windpipe and lungs). It's caused by a coronavirus named SARS-CoV-2.

It spreads the same way other coronaviruses do, mainly through person-to-person contact. Infections range from mild to serious.

SARS-CoV-2 is one of seven types of coronavirus, including the ones that cause severe diseases like Middle East respiratory syndrome (MERS) and sudden acute respiratory syndrome (SARS). The other coronaviruses cause most of the colds that affect us during the year but aren’t a serious threat for otherwise healthy people.

In early 2020, after a December 2019 outbreak in China, the World Health Organization identified SARS-CoV-2 as a new type of coronavirus. The outbreak quickly spread around the world.

Is there more than one strain of SARS-CoV-2?

It’s normal for a virus to change, or mutate, as it infects people. A Chinese study of 103 COVID-19 cases suggests the virus that causes it has done just that. They found two strains, which they named L and S. The S type is older, but the L type was more common in early stages of the outbreak. They think one may cause more cases of the disease than the other, but they’re still working on what it all means.

How long will the coronavirus last?

It’s too soon to tell how long the pandemic will continue. It depends on many things, including researchers’ work to learn more about the virus, their search for a treatment and a vaccine, and the public’s efforts to slow the spread.

Dozens of vaccine candidates are in various stages of development and testing. This process usually takes years. Researchers are speeding it up as much as they can, but it still might take 12 to 18 months to find a vaccine that works and is safe.

Symptoms of COVID-19

The main symptoms include:

• Fever
• Coughing
• Shortness of breath
• Fatigue
• Chills, sometimes with shaking
• Body aches
• Headache
• Sore throat
• Loss of smell or taste
• Nausea
• Diarrhea

The virus can lead to pneumonia, respiratory failure, septic shock, and death. Many COVID-19 complications may be caused by a condition known as cytokine release syndrome or a cytokine storm. This is when an infection triggers your immune system to flood your bloodstream with inflammatory proteins called cytokines. They can kill tissue and damage your organs.

STAY HOME. STAY SAFE !

Content

ALL DATASETS HAVE BEEN CLEANED FOR DIRECT USE.

Total_World_covid-19.csv : This dataset contains the worldwide data country-wise such as total cases , total active, deaths, etc. along with testing data.

Total_India_covid-19.csv : This dataset contains India level data statewise such as confirmed cases , active cases, deaths, etc.

Total_US_covid-19.csv : This dataset contains India level data statewise such as confirmed cases , active cases, deaths, etc.

Daily_States_India.csv : This dataset contains daily statewise data of India such as daily confirmed , daily active , daily deaths and daily recovered.

Total_Maharshtra_covid-19.csv : This dataset contains Maharashtra's district wise data such as confirmed cases , active cases, deaths, etc.

Acknowledgements

1. World and US data has been collected from Worldometer . Thanks a lot.

2. India and State level along with Maharashtra district data has been collected from Covid19India. Special thanks to them for providing updated and such wonderful data .

Inspiration

1) What has been the Covid-19 trend across the world, Is it declining? Is it increasing? 2) Which countries have been able to sustain and control the virus spread? 3) How is India coping up with the virus? Have they been able to control it at the given cost of 2 months nationwide lockdown?

As of May 2, 2023, the outbreak of the coronavirus disease (COVID-19) had been confirmed in almost every country in the world. The virus had infected over 687 million people worldwide, and the number of deaths had reached almost 6.87 million. The most severely affected countries include the U.S., India, and Brazil.

COVID-19: background information COVID-19 is a novel coronavirus that had not previously been identified in humans. The first case was detected in the Hubei province of China at the end of December 2019. The virus is highly transmissible and coughing and sneezing are the most common forms of transmission, which is similar to the outbreak of the SARS coronavirus that began in 2002 and was thought to have spread via cough and sneeze droplets expelled into the air by infected persons.

Naming the coronavirus disease Coronaviruses are a group of viruses that can be transmitted between animals and people, causing illnesses that may range from the common cold to more severe respiratory syndromes. In February 2020, the International Committee on Taxonomy of Viruses and the World Health Organization announced official names for both the virus and the disease it causes: SARS-CoV-2 and COVID-19, respectively. The name of the disease is derived from the words corona, virus, and disease, while the number 19 represents the year that it emerged.

Context

Covid-19 Data collected from various sources on the internet. This dataset has daily level information on the number of affected cases, deaths, and recovery from the 2019 novel coronavirus. Please note that this is time-series data and so the number of cases on any given day is the cumulative number.

Content

The dataset includes 28 files scrapped from various data sources mainly the John Hopkins GitHub repository, the ministry of health affairs India, worldometer, and Our World in Data website. The details of the files are as follows

• countries-aggregated.csv A simple and cleaned data with 5 columns with self-explanatory names. -covid-19-daily-tests-vs-daily-new-confirmed-cases-per-million.csv A time-series data of daily test conducted v/s daily new confirmed case per million. Entity column represents Country name while code represents ISO code of the country. -covid-contact-tracing.csv Data depicting government policies adopted in case of contact tracing. 0 -> No tracing, 1-> limited tracing, 2-> Comprehensive tracing. -covid-stringency-index.csv The nine metrics used to calculate the Stringency Index are school closures; workplace closures; cancellation of public events; restrictions on public gatherings; closures of public transport; stay-at-home requirements; public information campaigns; restrictions on internal movements; and international travel controls. The index on any given day is calculated as the mean score of the nine metrics, each taking a value between 0 and 100. A higher score indicates a stricter response (i.e. 100 = strictest response). -covid-vaccination-doses-per-capita.csv A total number of vaccination doses administered per 100 people in the total population. This is counted as a single dose, and may not equal the total number of people vaccinated, depending on the specific dose regime (e.g. people receive multiple doses). -covid-vaccine-willingness-and-people-vaccinated-by-country.csv Survey who have not received a COVID vaccine and who are willing vs. unwilling vs. uncertain if they would get a vaccine this week if it was available to them. -covid_india.csv India specific data containing the total number of active cases, recovered and deaths statewide. -cumulative-deaths-and-cases-covid-19.csv A cumulative data containing death and daily confirmed cases in the world. -current-covid-patients-hospital.csv Time series data containing a count of covid patients hospitalized in a country -daily-tests-per-thousand-people-smoothed-7-day.csv Daily test conducted per 1000 people in a running week average. -face-covering-policies-covid.csv Countries are grouped into five categories: 1->No policy 2->Recommended 3->Required in some specified shared/public spaces outside the home with other people present, or some situations when social distancing not possible 4->Required in all shared/public spaces outside the home with other people present or all situations when social distancing not possible 5->Required outside the home at all times regardless of location or presence of other people -full-list-cumulative-total-tests-per-thousand-map.csv Full list of total tests conducted per 1000 people. -income-support-covid.csv Income support captures if the government is covering the salaries or providing direct cash payments, universal basic income, or similar, of people who lose their jobs or cannot work. 0->No income support, 1->covers less than 50% of lost salary, 2-> covers more than 50% of the lost salary. -internal-movement-covid.csv Showing government policies in restricting internal movements. Ranges from 0 to 2 where 2 represents the strictest. -international-travel-covid.csv Showing government policies in restricting international movements. Ranges from 0 to 2 where 2 represents the strictest. -people-fully-vaccinated-covid.csv Contains the count of fully vaccinated people in different countries. -people-vaccinated-covid.csv Contains the total count of vaccinated people in different countries. -positive-rate-daily-smoothed.csv Contains the positivity rate of various countries in a week running average. -public-gathering-rules-covid.csv Restrictions are given based on the size of public gatherings as follows: 0->No restrictions 1 ->Restrictions on very large gatherings (the limit is above 1000 people) 2 -> gatherings between 100-1000 people 3 -> gatherings between 10-100 people 4 -> gatherings of less than 10 people -school-closures-covid.csv School closure during Covid. -share-people-fully-vaccinated-covid.csv Share of people that are fully vaccinated. -stay-at-home-covid.csv Countries are grouped into four categories: 0->No measures 1->Recommended not to leave the house 2->Required to not leave the house with exceptions for daily exercise, grocery shopping, and ‘essent...

Context

This Data is related to the World Fight against the Infectious Disease COVID-19 (CoronaVirus).

Content

This DataSet contains the World Data of Total Cases, Total Death, Total Tests and more by each Country and Continents.

Acknowledgements

This data is collected by Web Scraping. In this, I Scrap the data from the website Worldometers by writing the code in Python. For more, please Check the Code. Special Thanks to the Website Worldometers for providing such data. https://www.kaggle.com/samrat77/coronavirus-data-web-scraping

Inspiration

Inspired by all the others kagglers who are posting datasets and kernels on a daily bases.

Content

The current population of India is 1,403,717,340 as of Sunday, April 3, 2022, based on Worldometer elaboration of the latest United Nations data. This three datasets contain population data of India (2020 and historical), population forecast and population in major cities.

Attribute Information

• Year - Years from 2020-1955
• Population - Population in the respective year
• Yearly % Change - Percentage Yearly Change in Population
• Yearly Change - Yearly Change in Population
• Migrants (net) - Total number of migrants
• Median Age - Median age of the population
• Fertility Rate - Fertility rate
• Density (P/Km²)- Population density (population per square km)
• Urban Pop %- Percentage of urban population
• Urban Population- Urban population
• Country's Share of World Pop - Population share
• World Population - World Population in the respective year
• India Global Rank - Global Rank in Population

Source

Link : https://www.worldometers.info/world-population/india-population/

Updated Covid 19 and Other Datasets

Link : https://www.kaggle.com/anandhuh/datasets

If you find it useful, please support by upvoting ❤️

Thank You