This is a georeferenced raster image of a printed paper map of the Jenner, Alberta region (Sheet No. 072L11), published in 1949. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1949 and the information on the map is current as of 1949. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This is a georeferenced raster image of a printed paper map of the High Prairie, Alberta region (Sheet No. 083N08), published in 1954. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1954 and the information on the map is current as of . Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This is a georeferenced raster image of a printed paper map of the Beaverskin Creek, Alberta region (Sheet No. 094I01), published in 1960. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1960 and the information on the map is current as of 1956. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This is a georeferenced raster image of a printed paper map of the Embarras, Alberta region (Sheet No. 074L03), published in 1966. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1966 and the information on the map is current as of 1963. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This is a georeferenced raster image of a printed paper map of the Medicine Hat, Alberta region (Sheet No. 072L02), published in 1950. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1950 and the information on the map is current as of 1949. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This is a georeferenced raster image of a printed paper map of the Entrance, Alberta region (Sheet No. 083F05), published in 1955. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1955 and the information on the map is current as of . Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

The Phase 2, or Detailed, Forest Inventory is the second provincial level forest inventory conducted in the province of Alberta. The Phase 1 (Broad Scale) Forest Inventory (initiated in 1949 and completed by 1956) preceded the Detailed Inventory. The Phase 2 (Detailed) Forest Inventory was undertaken to cover lands where commercial timber commitments existed that were not inventoried as part of the Phase 1 (Broad Scale) Forest Inventory. The Phase 2 (Detailed) Forest Inventory utilized aerial photography from 1956 to 1966 to capture attribution similar to the Phase 1 (Broad Scale) Forest Inventory but at a more detailed level. A minimum stand size of 16.2 ha (40 acres) was used and the information was largely mapped at a scale of 1:31 680. Detailed information collected through the Phase 2 Inventory included species composition, stand density, stand heights, site class and the maturity or year of stand establishment. Cover type volume tables (CTVT) were developed, each applicable to different regions of the inventory area. Volume estimates were available by: cover type, species, and diameter class. The eastern slopes portion of the province from Township 2 to Township 47 that had never been captured by the Phase 1 (Broad Scale) Forest Inventory was mapped at the scale of 1:15 840. These maps are not available as geo-referenced rectified images or GIS-ready data.

This GIS dataset is part of a digital compilation of the Precambrian geology of the Alberta portion of the Canadian Shield and Athabasca Basin. It is one of the datasets used to produce Alberta Geological Survey (AGS) Map 537. For the Alberta shield, the compilation integrates detailed mapping by both AGS and the Geological Survey of Canada (GSC) at scales ranging between 1:31,680 and 1:250,000. Geochronological data and interpretations also helped prepare this dataset. For the Athabasca Basin, the compilation incorporates the geology of the basin presented in the ExTech IV volume, published in 2007 by the GSC. This dataset tries to present the geological information in a neutral manner, unbiased by the three mutually exclusive, regional tectonic concepts existing at the time of compilation. Users are encouraged to view AGS Map 537, which contains overviews of the geology of the respective areas and a complete reference list. The polygon feature dataset came from existing, though largely unpublished, digital sources. Areas of the shield are mainly from digitized versions of AGS Maps 180 and 25: the shield north of Lake Athabasca and south of the Athabasca Basin, respectively. The selected polygons were from GSC maps, which Alberta Geological Survey digitized, generalized and integrated into the compilation. The author gave new or updated descriptions to the map units and assigned them to the polygon attribute table.

The Phase 2, or Detailed, Forest Inventory is the second provincial level forest inventory conducted in the province of Alberta. The Phase 1 (Broad Scale) Forest Inventory (initiated in 1949 and completed by 1956) preceded the Detailed Inventory. The Phase 2 (Detailed) Forest Inventory was undertaken to cover lands where commercial timber commitments existed that were not inventoried as part of the Phase 1 (Broad Scale) Forest Inventory. The Phase 2 (Detailed) Forest Inventory utilized aerial photography from 1956 to 1966 to capture attribution similar to the Phase 1 (Broad Scale) Forest Inventory but at a more detailed level. A minimum stand size of 16.2 ha (40 acres) was used and the information was largely mapped at a scale of 1:31 680. Detailed information collected through the Phase 2 Inventory included species composition, stand density, stand heights, site class and the maturity or year of stand establishment. Cover type volume tables (CTVT) were developed, each applicable to different regions of the inventory area. Volume estimates were available by: cover type, species, and diameter class. The eastern slopes portion of the province from Township 2 to Township 47 that had never been captured by the Phase 1 (Broad Scale) Forest Inventory was mapped at the scale of 1:15 840. These maps are not available as geo-referenced rectified images or GIS-ready data.

Flood studies include detailed engineering reports and flood maps. The engineering reports are typically technical in nature and document the data, assumptions, and results of the hydrologic and hydraulic analyses required to create flood maps. Flood maps are created by combining hydraulic model results for different sized floods with high-accuracy ground information. Flood maps identify where water will flow during a flood, and what land could be flooded during different sized floods. Most flood maps focus on floods caused by high river flows when water escapes the river channel, most often experienced in spring or following summer rainstorms, but they can also show areas at risk from ice jam floods or document the extent of historic floods.Flood inundation maps show areas at risk for different sized floods, including ice jam floods in some communities, and identify areas protected by flood berms. Because they map a wide range of floods, they are most often used for emergency response planning and to inform local infrastructure design. Flood hazard maps define floodway and flood fringe areas for the 1:100 design flood and are typically used by communities for planning or to help make local land use and development decisions. The floodway is the portion of the flood hazard area where flows are deepest, fastest and most destructive. The flood fringe is the portion of the flood hazard area outside of the floodway, where flood water is generally shallower and flows slower than in the floodway. High hazard flood fringe is the area within the flood fringe with deeper or faster moving water than the rest of the flood fringe. Protected flood fringe identifies areas that could be flooded if dedicated flood berms fail or do not work as designed during the 1:100 design flood. Flood hazard maps define floodway and flood fringe areas for the 1:100 design flood and are typically used by communities for planning or to help make local land use and development decisions. Flood hazard maps can also illustrate additional information for communities to consider, including incremental areas at risk for floods larger than the 1:100 design flood, such as the 1:200 and 1:500 floods.Visit www.floodhazard.alberta.ca for more information about the Flood Hazard Identification Program. The website includes different sections for final flood studies and for draft flood studies. Flood maps can be viewed directly using the Flood Awareness Map Application at https://floods.alberta.ca/. The Alberta Flood Mapping GIS dataset is updated when new information is available or existing information changes. therefore, the Government of Alberta assumes no responsibility for discrepancies at the time of use. Users should check https://geodiscover.alberta.ca/ to verify they have the most recent version of the Alberta Flood Mapping GIS dataset.

This GIS dataset is part of a digital compilation of the Precambrian geology of the Alberta portion of the Canadian Shield and Athabasca Basin. It is one of the datasets used to produce Alberta Geological Survey (AGS) Map 537. For the Alberta shield, the compilation integrates detailed mapping by both AGS and the Geological Survey of Canada (GSC) at scales ranging between 1:31,680 and 1:250,000. Geochronological data and interpretations also helped prepare this dataset. For the Athabasca Basin, the compilation incorporates the geology of the basin presented in the ExTech IV volume, published in 2007 by the GSC. This dataset tries to present the geological information in a neutral manner, unbiased by the three mutually exclusive, regional tectonic concepts existing at the time of compilation. Users are encouraged to view AGS Map 537, which contains overviews of the geology of the respective areas and a complete reference list. The polygon feature dataset came from existing, though largely unpublished, digital sources. Areas of the shield are mainly from digitized versions of AGS Maps 180 and 25: the shield north of Lake Athabasca and south of the Athabasca Basin, respectively. The selected polygons were from GSC maps, which Alberta Geological Survey digitized, generalized and integrated into the compilation. The author gave new or updated descriptions to the map units and assigned them to the polygon attribute table.

The Phase 2, or Detailed, Forest Inventory is the second provincial level forest inventory conducted in the province of Alberta. The Phase 1 (Broad Scale) Forest Inventory (initiated in 1949 and completed by 1956) preceded the Detailed Inventory. The Phase 2 (Detailed) Forest Inventory was undertaken to cover lands where commercial timber commitments existed that were not inventoried as part of the Phase 1 (Broad Scale) Forest Inventory. The Phase 2 (Detailed) Forest Inventory utilized aerial photography from 1956 to 1966 to capture attribution similar to the Phase 1 (Broad Scale) Forest Inventory but at a more detailed level. A minimum stand size of 16.2 ha (40 acres) was used and the information was largely mapped at a scale of 1:31 680. Detailed information collected through the Phase 2 Inventory included species composition, stand density, stand heights, site class and the maturity or year of stand establishment. Cover type volume tables (CTVT) were developed, each applicable to different regions of the inventory area. Volume estimates were available by: cover type, species, and diameter class. The eastern slopes portion of the province from Township 2 to Township 47 that had never been captured by the Phase 1 (Broad Scale) Forest Inventory was mapped at the scale of 1:15 840. These maps are not available as geo-referenced rectified images or GIS-ready data.

This is a georeferenced raster image of a printed paper map of the Chip Lake, Alberta region (Sheet No. 083G11), published in 1960. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1960 and the information on the map is current as of 1949. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This is a georeferenced raster image of a printed paper map of the Youngstown, Alberta region (Sheet No. 072M11), published in 1961. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1961 and the information on the map is current as of 1957. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This series of 1:250 000 scale colour maps covers the provincial extent of Alberta and is comprised of 50 maps that are individually named using the National Topographic System (NTS) map sheet identifier. These maps display: Alberta Township System (ATS), contours (50m intervals), major hydrographic features, municipalities, major roads, railways, and select geo-administrative features (parks, reserves, etc.).

This GIS dataset is part of a digital compilation of the Precambrian geology of the Alberta portion of the Canadian Shield and Athabasca Basin. It is one of the datasets used to produce Alberta Geological Survey (AGS) Map 537. For the Alberta shield, the compilation integrates detailed mapping by both AGS and the Geological Survey of Canada (GSC) at scales ranging between 1:31,680 and 1:250,000. Geochronological data and interpretations also helped prepare this dataset. For the Athabasca Basin, the compilation incorporates the geology of the basin presented in the ExTech IV volume, published in 2007 by the GSC. This dataset tries to present the geological information in a neutral manner, unbiased by the three mutually exclusive, regional tectonic concepts existing at the time of compilation. Users are encouraged to view AGS Map 537, which contains overviews of the geology of the respective areas and a complete reference list. The polygon feature dataset came from existing, though largely unpublished, digital sources. Areas of the shield are mainly from digitized versions of AGS Maps 180 and 25: the shield north of Lake Athabasca and south of the Athabasca Basin, respectively. The selected polygons were from GSC maps, which Alberta Geological Survey digitized, generalized and integrated into the compilation. The author gave new or updated descriptions to the map units and assigned them to the polygon attribute table.

This is a georeferenced raster image of a printed paper map of the Wapiti, Alberta region (Sheet No. 083L14), published in 1961. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1961 and the information on the map is current as of 1954. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This is a georeferenced raster image of a printed paper map of the Barrier Mountain, Alberta region (Sheet No. 082O12), published in 1960. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1960 and the information on the map is current as of 1955. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This is a georeferenced raster image of a printed paper map of the Foremost, Alberta region (Sheet No. 072E06), published in 1967. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1967 and the information on the map is current as of 1960. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.

This is a georeferenced raster image of a printed paper map of the Snaring River, Alberta region (Sheet No. 083E01), published in 1955. It is the first edition in a series of maps, which show both natural and man-made features such as relief, spot heights, administrative boundaries, secondary and side roads, railways, trails, wooded areas, waterways including lakes, rivers, streams and rapids, bridges, buildings, mills, power lines, terrain, and land formations. This map was published in 1955 and the information on the map is current as of 1949. Maps were produced by Natural Resources Canada (NRCan) and it's preceding agencies, in partnership with other government agencies. Please note: image / survey capture dates can span several years, and some details may have been updated later than others. Please consult individual map sheets for detailed production information, which can be found in the bottom left hand corner. Original maps were digitally scanned by McGill Libraries in partnership with Canadiana.org, and georeferencing for the maps was provided by the University of Toronto Libraries and Eastview Corporation.