This dataset presents the estimates of the internal migration statistics of Australia by Local Government Areas (LGA) following the 2011 Australian Statistical Geography Standard (ASGS). The dataset spans from the 2006-07 financial year up to the 2015-16 financial year.

Regional internal migration is the movement of people from one region to another within Australia (both interstate and intrastate). For example, it incorporates moves from a Local Government Area (LGA) to any other LGA within the country. Net regional internal migration is the net gain or loss of population through this movement.

The ABS has developed a new series of annual regional internal migration estimates (RIME) based on the 2011 edition of the Australian Statistical Geography Standard (ASGS). The Medicare and Defence data used for estimating interstate migration is now also used to estimate internal migration below the state/territory level. However, as Medicare and Defence change of address counts are supplied to the ABS by postcode a method was developed to convert these counts to SA2, the base spatial unit of the ASGS. The method used correspondences to convert to SA2, and adjustments were applied to account for known deficiencies in the Medicare and Defence data. A similar method was used to prepare RIME at the LGA level, based on 2011 boundaries.

This data is Australian Bureau of Statistics (ABS) data (catalogue number: 3412.0) used with permission from the ABS.

For more information please visit the ABS Explanatory Notes.

Please note: RIME are not directly comparable with estimated resident populations (ERPs) because of the different methods and source data used to prepare each series. The combination of natural increase and net migration (internal and overseas) therefore may not correspond with change in ERP. AURIN has spatially enabled the original data.

This dataset presents the estimates of the internal migration statistics of Australia by Statistical Areas Level 2 (SA2) following the 2011 Australian Statistical Geography Standard (ASGS). The dataset spans from the 2006-07 financial year up to the 2015-16 financial year. Regional internal migration is the movement of people from one region to another within Australia (both interstate and intrastate). For example, it incorporates moves from a Statistical Area Level 2 (SA2) to any other SA2 within the country. Net regional internal migration is the net gain or loss of population through this movement. The ABS has developed a new series of annual regional internal migration estimates (RIME) based on the 2011 edition of the Australian Statistical Geography Standard (ASGS). The Medicare and Defence data used for estimating interstate migration is now also used to estimate internal migration below the state/territory level. However, as Medicare and Defence change of address counts are supplied to the ABS by postcode a method was developed to convert these counts to SA2, the base spatial unit of the ASGS. The method used correspondences to convert to SA2, and adjustments were applied to account for known deficiencies in the Medicare and Defence data. A similar method was used to prepare RIME at the LGA level, based on 2011 boundaries. This data is Australian Bureau of Statistics (ABS) data (catalogue number: 3412.0) used with permission from the ABS. For more information please visit the ABS Explanatory Notes. Please note: RIME are not directly comparable with estimated resident populations (ERPs) because of the different methods and source data used to prepare each series. The combination of natural increase and net migration (internal and overseas) therefore may not correspond with change in ERP. AURIN has spatially enabled the original data.

This dataset presents the estimates of the internal migration statistics of Australia by Statistical Areas Level 4 (SA4) following the 2011 Australian Statistical Geography Standard (ASGS). The dataset spans from the 2006-07 financial year up to the 2015-16 financial year. Regional internal migration is the movement of people from one region to another within Australia (both interstate and intrastate). For example, it incorporates moves from a Statistical Area Level 4 (SA4) to any other SA4 within the country. Net regional internal migration is the net gain or loss of population through this movement. The ABS has developed a new series of annual regional internal migration estimates (RIME) based on the 2011 edition of the Australian Statistical Geography Standard (ASGS). The Medicare and Defence data used for estimating interstate migration is now also used to estimate internal migration below the state/territory level. However, as Medicare and Defence change of address counts are supplied to the ABS by postcode a method was developed to convert these counts to SA4, the base spatial unit of the ASGS. The method used correspondences to convert to SA4, and adjustments were applied to account for known deficiencies in the Medicare and Defence data. A similar method was used to prepare RIME at the LGA level, based on 2011 boundaries. This data is Australian Bureau of Statistics (ABS) data (catalogue number: 3412.0) used with permission from the ABS. For more information please visit the ABS Explanatory Notes. Please note: RIME are not directly comparable with estimated resident populations (ERPs) because of the different methods and source data used to prepare each series. The combination of natural increase and net migration (internal and overseas) therefore may not correspond with change in ERP. AURIN has spatially enabled the original data.

This dataset presents the estimates of the internal and overseas migration statistics of Australia by age by Statistical Area Level 2 (SA2) following the 2016 Australian Statistical Geography Standard (ASGS). The dataset spans from the 2016-17 financial year up to the 2019-20 financial year. Overseas migration is the movement of people from overseas to Australia's sub-state areas and vice-versa. It cannot be directly measured and is estimated by breaking down overseas migrant arrivals and departures at the state level to sub-state areas, using information from the most recent Census. The state-level overseas migration data is sourced from Department of Home Affairs processing systems, visa information, and incoming passenger cards, and is published in National, state and territory population. Internal migration is the movement of people across a specified boundary within Australia involving a change in place of usual residence. It cannot be directly measured and is instead estimated using administrative data. The movement of people between and within Australia's states and territories cannot be directly measured and is estimated using administrative data. Internal migration is estimated based on a combination of Census data (usual address one year ago), Medicare change of address data (provided by Services Australia), and Department of Defence records (for military personnel only). The Medicare source data is assigned to a state or territory and GCCSA for a person's departure and arrival locations, based on the postcodes of their residential addresses as registered with Medicare. Postcodes are assigned wholly to a state/territory and GCCSA based on best fit. Where a postcode is split across areas, it is assigned to the area that contains the majority of that postcode's population. For more information please visit the Regional population methodology. AURIN has spatially enabled the original data.

This dataset presents the estimates of the internal and overseas migration statistics of Australia by age by Statistical Area Level 4 (SA4) following the 2016 Australian Statistical Geography Standard (ASGS). The dataset spans from the 2016-17 financial year up to the 2019-20 financial year. Overseas migration is the movement of people from overseas to Australia's sub-state areas and vice-versa. It cannot be directly measured and is estimated by breaking down overseas migrant arrivals and departures at the state level to sub-state areas, using information from the most recent Census. The state-level overseas migration data is sourced from Department of Home Affairs processing systems, visa information, and incoming passenger cards, and is published in National, state and territory population. Internal migration is the movement of people across a specified boundary within Australia involving a change in place of usual residence. It cannot be directly measured and is instead estimated using administrative data. The movement of people between and within Australia's states and territories cannot be directly measured and is estimated using administrative data. Internal migration is estimated based on a combination of Census data (usual address one year ago), Medicare change of address data (provided by Services Australia), and Department of Defence records (for military personnel only). The Medicare source data is assigned to a state or territory and GCCSA for a person's departure and arrival locations, based on the postcodes of their residential addresses as registered with Medicare. Postcodes are assigned wholly to a state/territory and GCCSA based on best fit. Where a postcode is split across areas, it is assigned to the area that contains the majority of that postcode's population. For more information please visit the Regional population methodology. AURIN has spatially enabled the original data.

This dataset presents the estimates of the internal migration statistics of Australia by Statistical Areas Level 3 (SA3) following the 2011 Australian Statistical Geography Standard (ASGS). The dataset spans from the 2006-07 financial year up to the 2015-16 financial year. Regional internal migration is the movement of people from one region to another within Australia (both interstate and intrastate). For example, it incorporates moves from a Statistical Area Level 3 (SA3) to any other SA3 within the country. Net regional internal migration is the net gain or loss of population through this movement. The ABS has developed a new series of annual regional internal migration estimates (RIME) based on the 2011 edition of the Australian Statistical Geography Standard (ASGS). The Medicare and Defence data used for estimating interstate migration is now also used to estimate internal migration below the state/territory level. However, as Medicare and Defence change of address counts are supplied to the ABS by postcode a method was developed to convert these counts to SA3, the base spatial unit of the ASGS. The method used correspondences to convert to SA3, and adjustments were applied to account for known deficiencies in the Medicare and Defence data. A similar method was used to prepare RIME at the LGA level, based on 2011 boundaries. This data is Australian Bureau of Statistics (ABS) data (catalogue number: 3412.0) used with permission from the ABS. For more information please visit the ABS Explanatory Notes. Please note: RIME are not directly comparable with estimated resident populations (ERPs) because of the different methods and source data used to prepare each series. The combination of natural increase and net migration (internal and overseas) therefore may not correspond with change in ERP. AURIN has spatially enabled the original data.

This dataset presents the estimates of the internal and overseas migration statistics of Australia by age by Greater Capital City Statistical Area (GCCSA) following the 2016 Australian Statistical Geography Standard (ASGS). The dataset spans from the 2016-17 financial year up to the 2019-20 financial year. Overseas migration is the movement of people from overseas to Australia's sub-state areas and vice-versa. It cannot be directly measured and is estimated by breaking down overseas migrant arrivals and departures at the state level to sub-state areas, using information from the most recent Census. The state-level overseas migration data is sourced from Department of Home Affairs processing systems, visa information, and incoming passenger cards, and is published in National, state and territory population. Internal migration is the movement of people across a specified boundary within Australia involving a change in place of usual residence. It cannot be directly measured and is instead estimated using administrative data. The movement of people between and within Australia's states and territories cannot be directly measured and is estimated using administrative data. Internal migration is estimated based on a combination of Census data (usual address one year ago), Medicare change of address data (provided by Services Australia), and Department of Defence records (for military personnel only). The Medicare source data is assigned to a state or territory and GCCSA for a person's departure and arrival locations, based on the postcodes of their residential addresses as registered with Medicare. Postcodes are assigned wholly to a state/territory and GCCSA based on best fit. Where a postcode is split across areas, it is assigned to the area that contains the majority of that postcode's population. For more information please visit the Regional population methodology. AURIN has spatially enabled the original data.

These population projections were prepared by the Australian Bureau of Statistics (ABS) for Geoscience Australia. The projections are not official ABS data and are owned by Geoscience Australia. These projections are for Statistical Areas Level 2 (SA2s) and Local Government Areas (LGAs), and are projected out from a base population as at 30 June 2022, by age and sex. Projections are for 30 June 2023 to 2032, with results disaggregated by age and sex.

Method The cohort-component method was used for these projections. In this method, the base population is projected forward annually by calculating the effect of births, deaths and migration (the components) within each age-sex cohort according to the specified fertility, mortality and overseas and internal migration assumptions. The projected usual resident population by single year of age and sex was produced in four successive stages – national, state/territory, capital city/rest of state, and finally SA2s. Assumptions were made for each level and the resulting projected components and population are constrained to the geographic level above for each year.
These projections were derived from a combination of assumptions published in Population Projections, Australia, 2022 (base) to 2071 on 23 November 2023, and historical patterns observed within each state/territory.

Projections – capital city/rest of state regions The base population is 30 June 2022 Estimated Resident Population (ERP) as published in National, state and territory population, June 2022. For fertility, the total fertility rate (at the national level) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, of 1.6 babies per woman being phased in from 2022 levels over five years to 2027, before remaining steady for the remainder of the projection span. Observed state/territory, and greater capital city level fertility differentials were applied to the national data so that established trends in the state and capital city/rest of state relativities were preserved. Mortality rates are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that mortality rates will continue to decline across Australia with state/territory differentials persisting. State/territory and capital city/rest of state differentials were used to ensure projected deaths are consistent with the historical trend. Annual net overseas migration (NOM) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, with an assumed gain (at the national level) of 400,000 in 2022-23, increasing to 315,000 in 2023-24, then declining to 225,000 in 2026-27, after which NOM is assumed to remain constant. State and capital city/rest of state shares are based on a weighted average of NOM data from 2010 to 2019 at the state and territory level to account for the impact of COVID-19. For internal migration, net gains and losses from states and territories and capital city/rest of state regions are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that net interstate migration will trend towards long-term historic average flows.

Projections – Statistical Areas Level 2 The base population for each SA2 is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. The SA2-level fertility and mortality assumptions were derived by combining the medium scenario state/territory assumptions from Population Projections, Australia, 2022 (base) to 2071, with recent fertility and mortality trends in each SA2 based on annual births (by sex) and deaths (by age and sex) published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. Assumed overseas and internal migration for each SA2 is based on SA2-specific annual overseas and internal arrivals and departures estimates published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. The internal migration data was strengthened with SA2-specific data from the 2021 Census, based on the usual residence one year before Census night question. Assumptions were applied by SA2, age and sex. Assumptions were adjusted for some SA2s, to provide more plausible future population levels, and age and sex distribution changes, including areas where populations may not age over time, for example due to significant resident student and defence force populations. Most assumption adjustments were made via the internal migration component. For some SA2s with zero or a very small population base, but where significant population growth is expected, replacement migration age/sex profiles were applied. All SA2-level components and projected projections are constrained to the medium series of capital city/rest of state data in Population Projections, Australia, 2022 (base) to 2071.

Projections – Local Government Areas The base population for each LGA is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. Projections for 30 June 2023 to 2032 were created by converting from the SA2-level population projections to LGAs by age and sex. This was done using an age-specific population correspondence, where the data for each year of the projection span were converted based on 2021 population shares across SA2s. The LGA and SA2 projections are congruous in aggregation as well as in isolation. Unlike the projections prepared at SA2 level, no LGA-specific projection assumptions were used.

Nature of projections and considerations for usage The nature of the projection method and inherent fluctuations in population dynamics mean that care should be taken when using and interpreting the projection results. The projections are not forecasts, but rather illustrate future changes which would occur if the stated assumptions were to apply over the projection period. These projections do not attempt to allow for non-demographic factors such as major government policy decisions, economic factors, catastrophes, wars and pandemics, which may affect future demographic behaviour. To illustrate a range of possible outcomes, alternative projection series for national, state/territory and capital city/rest of state areas, using different combinations of fertility, mortality, overseas and internal migration assumptions, are prepared. Alternative series are published in Population Projections, Australia, 2022 (base) to 2071. Only one series of SA2-level projections was prepared for this product. Population projections can take account of planning and other decisions by governments known at the time the projections were derived, including sub-state projections published by each state and territory government. The ABS generally does not have access to the policies or decisions of commonwealth, state and local governments and businesses that assist in accurately forecasting small area populations. Migration, especially internal migration, accounts for the majority of projected population change for most SA2s. Volatile and unpredictable small area migration trends, especially in the short-term, can have a significant effect on longer-term projection results. Care therefore should be taken with SA2s with small total populations and very small age-sex cells, especially at older ages. While these projections are calculated at the single year of age level, small numbers, and fluctuations across individual ages in the base population and projection assumptions limit the reliability of SA2-level projections at single year of age level. These fluctuations reduce and reliability improves when the projection results are aggregated to broader age groups such as the five-year age bands in this product. For areas with small elderly populations, results aggregated to 65 and over are more reliable than for the individual age groups above 65. With the exception of areas with high planned population growth, SA2s with a base total population of less than 500 have generally been held constant for the projection period in this product as their populations are too small to be reliably projected at all, however their (small) age/sex distributions may change slightly. These SA2s are listed in the appendix. The base (2022) SA2 population estimates and post-2022 projections by age and sex include small artificial cells, including 1s and 2s. These are the result of a confidentialisation process and forced additivity, to control SA2 and capital city/rest of state age/sex totals, being applied to their original values. SA2s and LGAs in this product are based on the Australian Statistical Geography Standard (ASGS) boundaries as at the 2021 Census (ASGS Edition 3). For further information, see Australian Statistical Geography Standard (ASGS) Edition 3.

Made possible by the Digital Atlas of Australia The Digital Atlas of Australia is a key Australian Government initiative being led by Geoscience Australia, highlighted in the Data and Digital Government Strategy. It brings together trusted datasets from across government in an interactive, secure, and easy-to-use geospatial platform. The Australian Bureau of Statistics (ABS) is working in partnership with Geoscience Australia to establish a set of web services to make ABS data available in the Digital Atlas of Australia.

Contact the Australian Bureau of Statistics If you have questions or feedback about this web service, please email geography@abs.gov.au. To subscribe to updates about ABS web services and geospatial products, please complete this form. For information about how the ABS manages any personal information you provide view the ABS privacy policy.

Data and geography references Source data publication: Population Projections, Australia, 2022 (base)

Estimated resident population (ERP) is the official measure of the Australian population.

This dataset presents estimated resident population for 30 June 2001 to 30 June 2023 by Local Government Areas (LGAs), 2023. Estimates are final for 2001 to 2021, revised for 2022, and preliminary for 2023.

What is ERP? ERP links people to a place of usual residence within Australia. Usual residence is the address at which a person considers themselves to currently live. ERP includes all people who usually live in Australia (regardless of nationality, citizenship or legal status), with the exception of foreign diplomatic personnel and their families. It includes usual residents who are overseas for less than 12 months out of a continuous 16-month period. It excludes those who are in Australia for less than 12 months out of a continuous 16-month period. ERP is prepared by adding births, subtracting deaths and adding the net of overseas and internal migration to a base population derived from the latest Census of Population and Housing.

The LGA estimates in this product are subject to some error. Some caution should be exercised when using the estimates, especially for areas with very small populations. Estimates of under three people should be regarded as synthetic due to confidentiality procedures. For further information about the data see: Regional Population Methodology.

Made possible by the Digital Atlas of Australia The Digital Atlas of Australia is an Australian Government initiative being led by Geoscience Australia. It will bring together trusted datasets from across government in an interactive, secure, and easy-to-use geospatial platform. The Australian Bureau of Statistics (ABS) is working in partnership with Geoscience Australia to establish a set of web services to make ABS data available in the Digital Atlas.

Contact the Australian Bureau of Statistics (ABS) If you have questions, feedback or would like to receive updates about this web service, please email geography@abs.gov.au. For information about how the ABS manages any personal information you provide view the ABS privacy policy.

Data and geography references Source data publication: Regional population, 2022-23 Geographic boundary information: Australian Statistical Geography Standard (ASGS) Edition 3 Further information: Regional population methodology Source: Australian Bureau of Statistics (ABS)

Estimated resident population (ERP) is the official measure of the Australian population.

This dataset presents estimated resident population for 30 June 2001 to 30 June 2023 by Statistical Areas Level 2 (SA2s), 2021. Estimates are final for 2001 to 2021, revised for 2022, and preliminary for 2023.

What is ERP? ERP links people to a place of usual residence within Australia. Usual residence is the address at which a person considers themselves to currently live. ERP includes all people who usually live in Australia (regardless of nationality, citizenship or legal status), with the exception of foreign diplomatic personnel and their families. It includes usual residents who are overseas for less than 12 months out of a continuous 16-month period. It excludes those who are in Australia for less than 12 months out of a continuous 16-month period. ERP is prepared by adding births, subtracting deaths and adding the net of overseas and internal migration to a base population derived from the latest Census of Population and Housing.

The SA2 estimates in this product are subject to some error. Some caution should be exercised when using the estimates, especially for areas with very small populations. Estimates of under three people should be regarded as synthetic due to confidentiality procedures. For further information about the data see: Regional Population Methodology.

Made possible by the Digital Atlas of Australia The Digital Atlas of Australia is an Australian Government initiative being led by Geoscience Australia. It will bring together trusted datasets from across government in an interactive, secure, and easy-to-use geospatial platform. The Australian Bureau of Statistics (ABS) is working in partnership with Geoscience Australia to establish a set of web services to make ABS data available in the Digital Atlas.

Contact the Australian Bureau of Statistics (ABS) If you have questions, feedback or would like to receive updates about this web service, please email geography@abs.gov.au. For information about how the ABS manages any personal information you provide view the ABS privacy policy.

Data and geography references Source data publication: Regional population, 2022-23 Geographic boundary information: Australian Statistical Geography Standard (ASGS) Edition 3 Further information: Regional population methodology Source: Australian Bureau of Statistics (ABS)

This dataset presents data on population and people available from the ABS Data by Region statistics. This release of Data by Region presents various data for 2011-2019 and Census of Population and Housing data for 2011 and 2016 and is based on the Local Government Area (LGA) 2019 boundaries. The dataset includes information in the following specified areas of population and people: Estimated Resident Population, Working Age Population, Median Age, Births and Deaths, Population Density, Internal and Overseas Migration, Aboriginal and Torres Strait Islander people, Overseas Born Proportion, Religious Affiliation and Speaks language other than English.

Data by Region contains a standard set of data for each region type, depending on the availability of statistics for particular geographies. Data are sourced from a wide variety of collections, both ABS and non-ABS. When analysing these statistics, care needs to be taken as time periods, definitions, methodologies, scope and coverage can differ across collections. Where available, data have been presented as a time series - to enable users to assess changes over time. However, when looked at on a period to period basis, some series may sometimes appear volatile. When analysing the data, users are encouraged to consider the longer term behaviour of the series, where this extra information is available.

For more information please visit the Explanatory Notes.

AURIN has made the following changes to the original data:

• Spatially enabled the original data with the ABS Australian Statistical Geography Standard (ASGS) LGA 2019 dataset.

• Some data values in Data by Region have been randomly adjusted or suppressed to avoid the release of confidential details.

• Where data was not available, not available for publication, nil or rounded to zero in the original data, it has been set to null.

• Columns and rows that did not contain any values in the original data have been removed.

Greater Capital City Statistical Area (GCCSA)

Greater Capital City Statistical Areas (GCCSAs) represent the Capital City regions of each state and territory in Australia.

They are designed to represent the functional area of each of the eight state and territory capital cities. This includes populations who regularly socialise, shop or work within the city, but may live either in the city or in the small towns and rural areas surrounding the city.

Within each state and territory, the area outside of a capital city is called the ‘Rest of State’ region. The ‘Rest of State’ region together with the capital city area builds the whole state or territory.

Using GCCSAs with Census data

Use GCCSAs if you would like to understand how a population interacts within and around a Capital City. Examples include but are not limited to, journey to work, cultural diversity, long-term health conditions, usual address and internal migration.

​

Australian Bureau of Statistics (Jul2021-Jun2026), Data services and APIs, ABS Website, accessed 25 July 2023.

https://www.abs.gov.au/website-privacy-copyright-and-disclaimer#copyright-and-creative-commons

This dataset presents data on population and people available from the ABS Data by Region statistics. This release of Data by Region presents various data for 2011-2019 and Census of Population and Housing data for 2011 and 2016 and is based on the Statistical Area 2 (SA2) 2016 boundaries. The dataset includes information in the following specified areas of population and people: Estimated Resident Population, Working Age Population, Median Age, Births and Deaths, Population Density, Internal and Overseas Migration, Aboriginal and Torres Strait Islander people, Overseas Born Proportion, Religious Affiliation and Speaks language other than English. Data by Region contains a standard set of data for each region type, depending on the availability of statistics for particular geographies. Data are sourced from a wide variety of collections, both ABS and non-ABS. When analysing these statistics, care needs to be taken as time periods, definitions, methodologies, scope and coverage can differ across collections. Where available, data have been presented as a time series - to enable users to assess changes over time. However, when looked at on a period to period basis, some series may sometimes appear volatile. When analysing the data, users are encouraged to consider the longer term behaviour of the series, where this extra information is available. For more information please visit the Explanatory Notes. AURIN has made the following changes to the original data:

Spatially enabled the original data with the ABS Australian Statistical Geography Standard (ASGS) SA2 2016 dataset.

Some data values in Data by Region have been randomly adjusted or suppressed to avoid the release of confidential details.

Where data was not available, not available for publication, nil or rounded to zero in the original data, it has been set to null.

Columns and rows that did not contain any values in the original data have been removed.

This dataset presents a range of data items sourced from a wide variety of collections, both Australian Bureau of Statistics (ABS) and non-ABS. The data is derived from the November 2024 release of Data by region. Individual data items present the latest reference year data available on Data by region. This layer presents data by Local Government Areas (LGA), 2021.

The Population and people theme is based on groupings of data within Data by region. Concepts, sources and methods for each dataset can be found on the Data by region methodology page.

The Population and people theme includes:

  Estimated resident population (including age by sex)
  Births and deaths
  Internal and overseas migration
  Census data

When analysing these statistics:

Time periods, definitions, methodologies, scope, and coverage can differ across collections.
Some data values have been randomly adjusted or suppressed to avoid the release of confidential data, this means

    some small cells have been randomly set to zero
    care should be taken when interpreting cells with small numbers or zeros.

Data and geography references

Source data publication: Data by region Geographic boundary information: Australian Statistical Geography Standard (ASGS) Edition 3 Further information: Data by region methodology, reference period 2011-24 Source: Australian Bureau of Statistics (ABS)

Made possible by the Digital Atlas of Australia

The Digital Atlas of Australia is a key Australian Government initiative being led by Geoscience Australia, highlighted in the Data and Digital Government Strategy. It brings together trusted datasets from across government in an interactive, secure, and easy-to-use geospatial platform. The Australian Bureau of Statistics (ABS) is working in partnership with Geoscience Australia to establish a set of web services to make ABS data available in the Digital Atlas of Australia.

Contact the Australian Bureau of Statistics

Email geography@abs.gov.au if you have any questions or feedback about this web service.
Subscribe to get updates on ABS web services and geospatial products.

Privacy at the Australian Bureau of Statistics Read how the ABS manages personal information - ABS privacy policy.

This dataset presents a range of data items sourced from a wide variety of collections, both Australian Bureau of Statistics (ABS) and non-ABS. The data is derived from the November 2024 release of Data by region. Individual data items present the latest reference year data available on Data by region. This layer presents data by Statistical Areas Level 2 (SA2), 2021.

The Population and people theme is based on groupings of data within Data by region. Concepts, sources and methods for each dataset can be found on the Data by region methodology page.

The Population and people theme includes:

  Estimated resident population (including age by sex)
  Births and deaths
  Internal and overseas migration
  Census data

When analysing these statistics:

Time periods, definitions, methodologies, scope, and coverage can differ across collections.
Some data values have been randomly adjusted or suppressed to avoid the release of confidential data, this means

    some small cells have been randomly set to zero
    care should be taken when interpreting cells with small numbers or zeros.

Data and geography references

Source data publication: Data by region Geographic boundary information: Australian Statistical Geography Standard (ASGS) Edition 3 Further information: Data by region methodology, reference period 2011-24 Source: Australian Bureau of Statistics (ABS)

Made possible by the Digital Atlas of Australia

The Digital Atlas of Australia is a key Australian Government initiative being led by Geoscience Australia, highlighted in the Data and Digital Government Strategy. It brings together trusted datasets from across government in an interactive, secure, and easy-to-use geospatial platform. The Australian Bureau of Statistics (ABS) is working in partnership with Geoscience Australia to establish a set of web services to make ABS data available in the Digital Atlas of Australia.

Contact the Australian Bureau of Statistics

Email geography@abs.gov.au if you have any questions or feedback about this web service.
Subscribe to get updates on ABS web services and geospatial products.

Privacy at the Australian Bureau of Statistics Read how the ABS manages personal information - ABS privacy policy.

This dataset presents data on population and people available from the ABS Data by Region statistics. This release of Data by Region presents various data for 2011-2019 and Census of Population and Housing data for 2011 and 2016 and is based on the Statistical Area 4 (SA4) 2016 boundaries. The dataset includes information in the following specified areas of population and people: Estimated Resident Population, Working Age Population, Median Age, Births and Deaths, Population Density, Internal and Overseas Migration, Aboriginal and Torres Strait Islander people, Overseas Born Proportion, Religious Affiliation and Speaks language other than English.

Data by Region contains a standard set of data for each region type, depending on the availability of statistics for particular geographies. Data are sourced from a wide variety of collections, both ABS and non-ABS. When analysing these statistics, care needs to be taken as time periods, definitions, methodologies, scope and coverage can differ across collections. Where available, data have been presented as a time series - to enable users to assess changes over time. However, when looked at on a period to period basis, some series may sometimes appear volatile. When analysing the data, users are encouraged to consider the longer term behaviour of the series, where this extra information is available.

For more information please visit the Explanatory Notes.

AURIN has made the following changes to the original data:

• Spatially enabled the original data with the ABS Australian Statistical Geography Standard (ASGS) SA4 2016 dataset.

• Some data values in Data by Region have been randomly adjusted or suppressed to avoid the release of confidential details.

• Where data was not available, not available for publication, nil or rounded to zero in the original data, it has been set to null.

• Columns and rows that did not contain any values in the original data have been removed.

This dataset presents data on population and people available from the ABS Data by Region statistics. This release of Data by Region presents various data for 2011-2019 and Census of Population and Housing data for 2011 and 2016 and is based on the Greater Capital City Statistical Area (GCCSA) 2016 boundaries. The dataset includes information in the following specified areas of population and people: Estimated Resident Population, Working Age Population, Median Age, Births and Deaths, Population Density, Internal and Overseas Migration, Aboriginal and Torres Strait Islander people, Overseas Born Proportion, Religious Affiliation and Speaks language other than English.

Data by Region contains a standard set of data for each region type, depending on the availability of statistics for particular geographies. Data are sourced from a wide variety of collections, both ABS and non-ABS. When analysing these statistics, care needs to be taken as time periods, definitions, methodologies, scope and coverage can differ across collections. Where available, data have been presented as a time series - to enable users to assess changes over time. However, when looked at on a period to period basis, some series may sometimes appear volatile. When analysing the data, users are encouraged to consider the longer term behaviour of the series, where this extra information is available.

For more information please visit the Explanatory Notes.

AURIN has made the following changes to the original data:

• Spatially enabled the original data with the ABS Australian Statistical Geography Standard (ASGS) GCCSA 2016 dataset.

• Some data values in Data by Region have been randomly adjusted or suppressed to avoid the release of confidential details.

• Where data was not available, not available for publication, nil or rounded to zero in the original data, it has been set to null.

• Columns and rows that did not contain any values in the original data have been removed.