Introduction

Geographical scale, in terms of spatial extent, provide a basis for other branches of science. This dataset contains newly proposed geographical and geological GIS boundaries for the Pan-Tibetan Highlands (new proposed name for the High Mountain Asia), based on geological and geomorphological features. This region comprises the Tibetan Plateau and three adjacent mountain regions: the Himalaya, Hengduan Mountains and Mountains of Central Asia, and boundaries are also given for each subregion individually. The dataset will benefit quantitative spatial analysis by providing a well-defined geographical scale for other branches of research, aiding cross-disciplinary comparisons and synthesis, as well as reproducibility of research results.

The dataset comprises three subsets, and we provide three data formats (.shp, .geojson and .kmz) for each of them. Shapefile format (.shp) was generated in ArcGIS Pro, and the other two were converted from shapefile, the conversion steps refer to 'Data processing' section below. The following is a description of the three subsets:

(1) The GIS boundaries we newly defined of the Pan-Tibetan Highlands and its four constituent sub-regions, i.e. the Tibetan Plateau, Himalaya, Hengduan Mountains and the Mountains of Central Asia. All files are placed in the "Pan-Tibetan Highlands (Liu et al._2022)" folder.

(2) We also provide GIS boundaries that were applied by other studies (cited in Fig. 3 of our work) in the folder "Tibetan Plateau and adjacent mountains (Others’ definitions)". If these data is used, please cite the relevent paper accrodingly. In addition, it is worthy to note that the GIS boundaries of Hengduan Mountains (Li et al. 1987a) and Mountains of Central Asia (Foggin et al. 2021) were newly generated in our study using Georeferencing toolbox in ArcGIS Pro.

(3) Geological assemblages and characters of the Pan-Tibetan Highlands, including Cratons and micro-continental blocks (Fig. S1), plus sutures, faults and thrusts (Fig. 4), are placed in the "Pan-Tibetan Highlands (geological files)" folder.

Note: High Mountain Asia: The name ‘High Mountain Asia’ is the only direct synonym of Pan-Tibetan Highlands, but this term is both grammatically awkward and somewhat misleading, and hence the term ‘Pan-Tibetan Highlands’ is here proposed to replace it. Third Pole: The first use of the term ‘Third Pole’ was in reference to the Himalaya by Kurz & Montandon (1933), but the usage was subsequently broadened to the Tibetan Plateau or the whole of the Pan-Tibetan Highlands. The mainstream scientific literature refer the ‘Third Pole’ to the region encompassing the Tibetan Plateau, Himalaya, Hengduan Mountains, Karakoram, Hindu Kush and Pamir. This definition was surpported by geological strcture (Main Pamir Thrust) in the western part, and generally overlaps with the ‘Tibetan Plateau’ sensu lato defined by some previous studies, but is more specific.

More discussion and reference about names please refer to the paper. The figures (Figs. 3, 4, S1) mentioned above were attached in the end of this document.

Data processing

We provide three data formats. Conversion of shapefile data to kmz format was done in ArcGIS Pro. We used the Layer to KML tool in Conversion Toolbox to convert the shapefile to kmz format. Conversion of shapefile data to geojson format was done in R. We read the data using the shapefile function of the raster package, and wrote it as a geojson file using the geojson_write function in the geojsonio package.

Version

Version 2022.1.

Acknowledgements

This study was supported by the Strategic Priority Research Program of Chinese Academy of Sciences (XDB31010000), the National Natural Science Foundation of China (41971071), the Key Research Program of Frontier Sciences, CAS (ZDBS-LY-7001). We are grateful to our coauthors insightful discussion and comments. We also want to thank professors Jed Kaplan, Yin An, Dai Erfu, Zhang Guoqing, Peter Cawood, Tobias Bolch and Marc Foggin for suggestions and providing GIS files.

Citation

Liu, J., Milne, R. I., Zhu, G. F., Spicer, R. A., Wambulwa, M. C., Wu, Z. Y., Li, D. Z. (2022). Name and scale matters: Clarifying the geography of Tibetan Plateau and adjacent mountain regions. Global and Planetary Change, In revision

Jie Liu & Guangfu Zhu. (2022). Geographical and geological GIS boundaries of the Tibetan Plateau and adjacent mountain regions (Version 2022.1). https://doi.org/10.5281/zenodo.6432940

Contacts

Dr. Jie LIU: E-mail: liujie@mail.kib.ac.cn;

Mr. Guangfu ZHU: zhuguangfu@mail.kib.ac.cn

Institution: Kunming Institute of Botany, Chinese Academy of Sciences

Address: 132# Lanhei Road, Heilongtan, Kunming 650201, Yunnan, China

Copyright

This dataset is available under the Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).

Overlay zoning districts are in addition to standard town zoning. The districts' boundaries and use limitations &/or development constraints are described in the town's zoning bylaw. The MVC generated these digital spatial boundaries based on the best GIS data available at the time of processing.Some overlay zoning districts are also Districts of Critical Planning Concern. These are zoning districts established by the Martha's Vineyard Commission and adopted by the town at town meeting.The boundaries are not survey-grade and are intended for planning purposes only.

GeoJSON from points.geojson

The USDA Long-Term Agroecosystem Research was established to develop national strategies for sustainable intensification of agricultural production. As part of the Agricultural Research Service, the LTAR Network incorporates numerous geographies consisting of experimental areas and locations where data are being gathered. Starting in early 2019, two working groups of the LTAR Network (Remote Sensing and GIS, and Data Management) set a major goal to jointly develop a geodatabase of LTAR Standard GIS Data Layers. The purpose of the geodatabase was to enhance the Network's ability to utilize coordinated, harmonized datasets and reduce redundancy and potential errors associated with multiple copies of similar datasets. Project organizers met at least twice with each of the 18 LTAR sites from September 2019 through December 2020, compiling and editing a set of detailed geospatial data layers comprising a geodatabase, describing essential data collection areas within the LTAR Network. The LTAR Standard GIS Data Layers geodatabase consists of geospatial data that represent locations and areas associated with the LTAR Network as of late 2020, including LTAR site locations, addresses, experimental plots, fields and watersheds, eddy flux towers, and phenocams. There are six data layers in the geodatabase available to the public. This geodatabase was created in 2019-2020 by the LTAR network as a national collaborative effort among working groups and LTAR sites. The creation of the geodatabase began with initial requests to LTAR site leads and data managers for geospatial data, followed by meetings with each LTAR site to review the initial draft. Edits were documented, and the final draft was again reviewed and certified by LTAR site leads or their delegates. Revisions to this geodatabase will occur biennially, with the next revision scheduled to be published in 2023. Resources in this dataset:Resource Title: LTAR Standard GIS Data Layers, 2020 version, File Geodatabase. File Name: LTAR_Standard_GIS_Layers_v2020.zipResource Description: This file geodatabase consists of authoritative GIS data layers of the Long-Term Agroecosystem Research Network. Data layers include: LTAR site locations, LTAR site points of contact and street addresses, LTAR experimental boundaries, LTAR site "legacy region" boundaries, LTAR eddy flux tower locations, and LTAR phenocam locations.Resource Software Recommended: ArcGIS,url: esri.com Resource Title: LTAR Standard GIS Data Layers, 2020 version, GeoJSON files. File Name: LTAR_Standard_GIS_Layers_v2020_GeoJSON_ADC.zipResource Description: The contents of the LTAR Standard GIS Data Layers includes geospatial data that represent locations and areas associated with the LTAR Network as of late 2020. This collection of geojson files includes spatial data describing LTAR site locations, addresses, experimental plots, fields and watersheds, eddy flux towers, and phenocams. There are six data layers in the geodatabase available to the public. This dataset was created in 2019-2020 by the LTAR network as a national collaborative effort among working groups and LTAR sites. Resource Software Recommended: QGIS,url: https://qgis.org/en/site/

Summary

Geojson files used to visualize geospatial layers relevant to identifying and assessing trucking fleet decarbonization opportunities with the MIT Climate & Sustainability Consortium's Geospatial Trucking Industry Decarbonization Explorer (Geo-TIDE) tool.

Relevant Links

Link to the online version of the tool (requires creation of a free user account).

Link to GitHub repo with source code to produce this dataset and deploy the Geo-TIDE tool locally.

Funding

This dataset was produced with support from the MIT Climate & Sustainability Consortium.

Original Data Sources

These geojson files draw from and synthesize a number of different datasets and tools. The original data sources and tools are described below:

Filename(s) Description of Original Data Source(s) Link(s) to Download Original Data License and Attribution for Original Data Source(s)

faf5_freight_flows/*.geojson

trucking_energy_demand.geojson

highway_assignment_links_*.geojson

infrastructure_pooling_thought_experiment/*.geojson

Regional and highway-level freight flow data obtained from the Freight Analysis Framework Version 5. Shapefiles for FAF5 region boundaries and highway links are obtained from the National Transportation Atlas Database. Emissions attributes are evaluated by incorporating data from the 2002 Vehicle Inventory and Use Survey and the GREET lifecycle emissions tool maintained by Argonne National Lab.

Shapefile for FAF5 Regions

Shapefile for FAF5 Highway Network Links

FAF5 2022 Origin-Destination Freight Flow database

FAF5 2022 Highway Assignment Results

Attribution for Shapefiles: United States Department of Transportation Bureau of Transportation Statistics National Transportation Atlas Database (NTAD). Available at: https://geodata.bts.gov/search?collection=Dataset.

License for Shapefiles: This NTAD dataset is a work of the United States government as defined in 17 U.S.C. § 101 and as such are not protected by any U.S. copyrights. This work is available for unrestricted public use.

Attribution for Origin-Destination Freight Flow database: National Transportation Research Center in the Oak Ridge National Laboratory with funding from the Bureau of Transportation Statistics and the Federal Highway Administration. Freight Analysis Framework Version 5: Origin-Destination Data. Available from: https://faf.ornl.gov/faf5/Default.aspx. Obtained on Aug 5, 2024. In the public domain.

Attribution for the 2022 Vehicle Inventory and Use Survey Data: United States Department of Transportation Bureau of Transportation Statistics. Vehicle Inventory and Use Survey (VIUS) 2002 [supporting datasets]. 2024. https://doi.org/10.21949/1506070

Attribution for the GREET tool (original publication): Argonne National Laboratory Energy Systems Division Center for Transportation Research. GREET Life-cycle Model. 2014. Available from this link.

Attribution for the GREET tool (2022 updates): Wang, Michael, et al. Summary of Expansions and Updates in GREET® 2022. United States. https://doi.org/10.2172/1891644

grid_emission_intensity/*.geojson

Emission intensity data is obtained from the eGRID database maintained by the United States Environmental Protection Agency.

eGRID subregion boundaries are obtained as a shapefile from the eGRID Mapping Files database.

eGRID database

Shapefile with eGRID subregion boundaries

Attribution for eGRID data: United States Environmental Protection Agency: eGRID with 2022 data. Available from https://www.epa.gov/egrid/download-data. In the public domain.

Attribution for shapefile: United States Environmental Protection Agency: eGRID Mapping Files. Available from https://www.epa.gov/egrid/egrid-mapping-files. In the public domain.

US_elec.geojson

US_hy.geojson

US_lng.geojson

US_cng.geojson

US_lpg.geojson

Locations of direct current fast chargers and refueling stations for alternative fuels along U.S. highways. Obtained directly from the Station Data for Alternative Fuel Corridors in the Alternative Fuels Data Center maintained by the United States Department of Energy Office of Energy Efficiency and Renewable Energy.

US_elec.geojson

US_hy.geojson

US_lng.geojson

US_cng.geojson

US_lpg.geojson

Attribution: U.S. Department of Energy, Energy Efficiency and Renewable Energy. Alternative Fueling Station Corridors. 2024. Available from: https://afdc.energy.gov/corridors. In the public domain.

These data and software code ("Data") are provided by the National Renewable Energy Laboratory ("NREL"), which is operated by the Alliance for Sustainable Energy, LLC ("Alliance"), for the U.S. Department of Energy ("DOE"), and may be used for any purpose whatsoever.

daily_grid_emission_profiles/*.geojson

Hourly emission intensity data obtained from ElectricityMaps.

Original data can be downloaded as csv files from the ElectricityMaps United States of America database

Shapefile with region boundaries used by ElectricityMaps

License: Open Database License (ODbL). Details here: https://www.electricitymaps.com/data-portal

Attribution for csv files: Electricity Maps (2024). United States of America 2022-23 Hourly Carbon Intensity Data (Version January 17, 2024). Electricity Maps Data Portal. https://www.electricitymaps.com/data-portal.

Attribution for shapefile with region boundaries: ElectricityMaps contributors (2024). electricitymaps-contrib (Version v1.155.0) [Computer software]. https://github.com/electricitymaps/electricitymaps-contrib.

gen_cap_2022_state_merged.geojson

trucking_energy_demand.geojson

Grid electricity generation and net summer power capacity data is obtained from the state-level electricity database maintained by the United States Energy Information Administration.

U.S. state boundaries obtained from this United States Department of the Interior U.S. Geological Survey ScienceBase-Catalog.

Annual electricity generation by state

Net summer capacity by state

Shapefile with U.S. state boundaries

Attribution for electricity generation and capacity data: U.S. Energy Information Administration (Aug 2024). Available from: https://www.eia.gov/electricity/data/state/. In the public domain.

electricity_rates_by_state_merged.geojson

Commercial electricity prices are obtained from the Electricity database maintained by the United States Energy Information Administration.

Electricity rate by state

Attribution: U.S. Energy Information Administration (Aug 2024). Available from: https://www.eia.gov/electricity/data.php. In the public domain.

demand_charges_merged.geojson

demand_charges_by_state.geojson

Maximum historical demand charges for each state and zip code are derived from a dataset compiled by the National Renewable Energy Laboratory in this this Data Catalog.

Historical demand charge dataset

The original dataset is compiled by the National Renewable Energy Laboratory (NREL), the U.S. Department of Energy (DOE), and the Alliance for Sustainable Energy, LLC ('Alliance').

Attribution: McLaren, Joyce, Pieter Gagnon, Daniel Zimny-Schmitt, Michael DeMinco, and Eric Wilson. 2017. 'Maximum demand charge rates for commercial and industrial electricity tariffs in the United States.' NREL Data Catalog. Golden, CO: National Renewable Energy Laboratory. Last updated: July 24, 2024. DOI: 10.7799/1392982.

eastcoast.geojson

midwest.geojson

la_i710.geojson

h2la.geojson

bayarea.geojson

saltlake.geojson

northeast.geojson

Highway corridors and regions targeted for heavy duty vehicle infrastructure projects are derived from a public announcement on February 15, 2023 by the United States Department of Energy.

The shapefile with Bay area boundaries is obtained from this Berkeley Library dataset.

The shapefile with Utah county boundaries is obtained from this dataset from the Utah Geospatial Resource Center.

Shapefile for Bay Area country boundaries

Shapefile for counties in Utah

Attribution for public announcement: United States Department of Energy. Biden-Harris Administration Announces Funding for Zero-Emission Medium- and Heavy-Duty Vehicle Corridors, Expansion of EV Charging in Underserved Communities (2023). Available from https://www.energy.gov/articles/biden-harris-administration-announces-funding-zero-emission-medium-and-heavy-duty-vehicle.

Attribution for Bay area boundaries: San Francisco (Calif.). Department Of Telecommunications and Information Services. Bay Area Counties. 2006. In the public domain.

Attribution for Utah boundaries: Utah Geospatial Resource Center & Lieutenant Governor's Office. Utah County Boundaries (2023). Available from https://gis.utah.gov/products/sgid/boundaries/county/.

License for Utah boundaries: Creative Commons 4.0 International License.

incentives_and_regulations/*.geojson

State-level incentives and regulations targeting heavy duty vehicles are collected from the State Laws and Incentives database maintained by the United States Department of Energy's Alternative Fuels Data Center.

Data was collected manually from the State Laws and Incentives database.

Attribution: U.S. Department of Energy, Energy Efficiency and Renewable Energy, Alternative Fuels Data Center. State Laws and Incentives. Accessed on Aug 5, 2024 from: https://afdc.energy.gov/laws/state. In the public domain.

These data and software code ("Data") are provided by the National Renewable Energy Laboratory ("NREL"), which is operated by the Alliance for Sustainable Energy, LLC ("Alliance"), for the U.S. Department of Energy ("DOE"), and may be used for any purpose whatsoever.

costs_and_emissions/*.geojson

diesel_price_by_state.geojson

trucking_energy_demand.geojson

Lifecycle costs and emissions of electric and diesel trucking are evaluated by adapting the model developed by Moreno Sader et al., and calibrated to the Run on Less dataset for the Tesla Semi collected from the 2023 PepsiCo Semi pilot by the North American Council for Freight Efficiency.

In

The feature class indicates the specific types of motorized vehicles allowed on the designated routes and their seasons of use. The feature class is designed to be consistent with the MVUM (Motor Vehicle Use Map). It is compiled from the GIS Data Dictionary data and Infra tabular data that the administrative units have prepared for the creation of their MVUMs. Only trails with the symbol value of 5-12, 16, 17 are Forest Service System trails and contain data concerning their availability for motorized use. This data is published and refreshed on a unit by unit basis as needed. Individual unit's data must be verified and proved consistent with the published MVUMs prior to publication in the EDW. Click this link for full metadata description: Metadata _This record was taken from the USDA Enterprise Data Inventory that feeds into the https://data.gov catalog. Data for this record includes the following resources: ISO-19139 metadata ArcGIS Hub Dataset ArcGIS GeoService OGC WMS CSV Shapefile GeoJSON KML For complete information, please visit https://data.gov.

Geojson file of Everglades National Park marine management routes. To be used in Florida Bay dashboard. Do not delete

Overlay zoning districts are in addition to standard town zoning. The districts' boundaries and use limitations &/or development constraints are described in the town's zoning bylaw. The MVC generated these digital spatial boundaries based on the best GIS data available at the time of processing.Some overlay zoning districts are also Districts of Critical Planning Concern. These are zoning districts established by the Martha's Vineyard Commission and adopted by the town at town meeting.The boundaries are not survey-grade and are intended for planning purposes only.

Collection of borehole geophysical logs from the Minnesota Geological Survey (MGS) Borehole Geophysical Database. This collection includes natural gamma ray, electrical, caliper, multiparameter, electromagnetic flowmeter, and video logs stored and managed at the MGS. Items in this GIS dataset have been formatted for public consumption and do not contain borehole geophysical data for any active public supply water wells flagged in the County Well Index (CWI) database. If available, links to PDF and LAS files for logs are included in the attribute table. Attribute names with (CWI) denote attributes pulled directly from the CWI database.

Overview

Empower your location data visualizations with our edge-matched polygons, even in difficult geographies.

Our self-hosted GIS data cover administrative and postal divisions with up to 6 precision levels: a zip code layer and up to 5 administrative levels. All levels follow a seamless hierarchical structure with no gaps or overlaps.

The geospatial data shapes are offered in high-precision and visualization resolution and are easily customized on-premise.

Use cases for the Global Boundaries Database (GIS data, Geospatial data)

• In-depth spatial analysis

• Clustering

• Geofencing

• Reverse Geocoding

• Reporting and Business Intelligence (BI)

Product Features

• Coherence and precision at every level

• Edge-matched polygons

• High-precision shapes for spatial analysis

• Fast-loading polygons for reporting and BI

• Multi-language support

For additional insights, you can combine the GIS data with:

• Population data: Historical and future trends

• UNLOCODE and IATA codes

• Time zones and Daylight Saving Time (DST)

Data export methodology

Our geospatial data packages are offered in variable formats, including - .shp - .gpkg - .kml - .shp - .gpkg - .kml - .geojson

All GIS data are optimized for seamless integration with popular systems like Esri ArcGIS, Snowflake, QGIS, and more.

Why companies choose our map data

• Precision at every level

• Coverage of difficult geographies

• No gaps, nor overlaps

Note: Custom geospatial data packages are available. Please submit a request via the above contact button for more details.

The UNI-CEN Digital Boundary File Series facilitates the mapping of UNI-CEN census data tables. Boundaries are provided in multiple formats for different use cases: Esri Shapefile (SHP), geoJson, and File Geodatabase (FGDB). SHP and FGDB files are provided in two projections: NAD83 CSRS for print cartography and WGS84 for web applications. The geoJson version is provided in WGS84 only. The UNI-CEN Standardized Census Data Tables are readily merged to these boundary files. For more information about file sources, the methods used to create them, and how to use them, consult the documentation at https://borealisdata.ca/dataverse/unicen_docs. For more information about the project, visit https://observatory.uwo.ca/unicen.

The datasets are sourced from the Ugandan Energy Sector GIS Working Group Open Data Site, developed and maintained by the Ugandan Energy Sector GIS Working Group. The Ugandan Energy Sector GIS Working Group’s mission is to develop a high quality GIS for the Energy Sector of Uganda in order to drive informed decision-making. As such, it brings datasets together in one place, organize them, keep them updated, and make public data available to all stakeholders. Link: http://data-energy-gis.opendata.arcgis.com/ The transmission line geojson and zipped shapefiles contain existing, planned, under construction lines. The source link: http://data-energy-gis.opendata.arcgis.com/datasets/6db06d51b0a34c9b989fc54c0d25c092_0 The substation geojson and zipped shapefiles contain existing, planned, under construction substations. The source link: http://data-energy-gis.opendata.arcgis.com/datasets/a7ef2af5ca9249babc5b20602edaba59_0 The transmission and substation datasets were last updated on March 9 2017.

This layer shows youth (age 16-19) school enrollment and employment status. This is shown by tract, county, and state centroids. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Estimates here for 'disconnected youth' differ from estimates of 'idle youth' on Census Bureau's website because idle youth includes those unemployed (actively looking for work). This layer is symbolized by the count of total youth and the percentage of youth who were disconnected. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top right. Current Vintage: 2012-2016ACS Table(s): B14005 Data downloaded from: Census Bureau's API for American Community Survey Date of API call: October 16, 2018National Figures: American Fact FinderThe United States Census Bureau's American Community Survey (ACS):About the SurveyGeography & ACSTechnical DocumentationNews & UpdatesThis ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the Census and ACS when using this data.Data Note from the Census:Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables.Data Processing Notes:This dataset is updated automatically when the most current vintage of ACS data is released each year. The service contains the ACS data as of the current vintage listed. Tabular data is updated annually with the Census Bureau's release schedule. This may alter data values, fields, and boundaries. Click here to learn more about ACS data releases.Boundaries come from the US Census TIGER geodatabases. Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines clipped for cartographic purposes. For census tracts, the water cutouts are derived from a subset of the 2010 AWATER (Area Water) boundaries offered by TIGER. For state and county boundaries, the water and coastlines are derived from the coastlines of the 500k TIGER Cartographic Boundary Shapefiles. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto RicoCensus tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99).Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey.Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.Negative values (e.g., -555555...) have been set to null. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate.Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate.The estimate is controlled. A statistical test for sampling variability is not appropriate.The data for this geographic area cannot be displayed because the number of sample cases is too small. NOTE: any calculated percentages or counts that contain estimates that have null margins of error yield null margins of error for the calculated fields.

Download high-quality, up-to-date United Arab Emirates shapefile boundaries (SHP, projection system SRID 4326). Our United Arab Emirates Shapefile Database offers comprehensive boundary data for spatial analysis, including administrative areas and geographic boundaries. This dataset contains accurate and up-to-date information on all administrative divisions, zip codes, cities, and geographic boundaries, making it an invaluable resource for various applications such as geographic analysis, map and visualization, reporting and business intelligence (BI), master data management, logistics and supply chain management, and sales and marketing. Our location data packages are available in various formats, including Shapefile, GeoJSON, KML, ASC, DAT, CSV, and GML, optimized for seamless integration with popular systems like Esri ArcGIS, Snowflake, QGIS, and more. Companies choose our location databases for their enterprise-grade service, reduction in integration time and cost by 30%, and weekly updates to ensure the highest quality.

This layer contains American Community Survey (ACS) 2016-2020 5-year estimates in order to determine if a Census tract is considered an opportunity zone/low income community. According to Tax Code Section 45D(e), low income Census Tracts are based on the following criteria:The poverty rate is at least 20 percent, ORThe median family income does not exceed 80 percent of statewide median family income or, if in a metropolitan area, the greater of 80 percent statewide median family income or 80 percent of metropolitan area median family incomeThe layer is visualized to show if a tract meets these criteria, and the pop-up provides poverty figures as well as tract, metropolitan area, and state level figures for median family income. When a tract meets the above criteria, it may also qualify for grants or findings such Opportunity Zones. These zones are designed to encourage economic development and job creation in communities throughout the country by providing tax benefits to investors who invest eligible capital into these communities. Another way this layer can be used is to gain funding through the Inflation Reduction Act of 2022. The data was downloaded on October 5, 2022 from the US Census Bureau via data.census.gov:Table B17020: Poverty Status in the Past 12 Months - TractsTable B19113: Median Family Income in the Past 12 Months (in 2020 inflation-adjusted dollars) - Tracts, Metropolitan area, StateVintage of the data: 2016-2020 American Community SurveyBoundaries used for analysis: TIGER 2020 Tract, Metro, and State Boundaries with large hydrography removed from tractsData was processed within ArcGIS Pro 3.0.2 using ModelBuilder to spatially join the metropolitan and state geographies to tracts.To see the same qualification on 2010-based Census tracts, there is also an older 2012-2016 version of the layer.

Downtown Austin Plan Districts boundaries used in the Austin Core Transportation (ACT) Plan

This data aligns with WWC Certification requirements, and serves as the basis for our data warehouse and open data roadmap. It's a continual work in progress across all departments.Louisville Metro Technology Services builds data and technology platforms to ready our government for our community’s digital future.Data Dictionary: Field Name Description Dataset Name The official title of the dataset as listed in the inventory. Brief Description of Data A short summary explaining the contents and purpose of the dataset. Data Source The origin or system from which the data is collected or generated. Home Department The primary department responsible for the dataset. Home Department Division The specific division within the department that manages the dataset. Data Steward (Business) Name The name of person responsible for the dataset’s accuracy and relevance. Data Custodian (Technical) Name) The technical contact responsible for maintaining and managing the dataset infrastructure. Data Classification The sensitivity level of the data (e.g., Public, Internal, Confidential) Data Format The file format(s) in which the dataset is available (e.g., CSV, JSON, Shapefile). Frequency of Data Change How often the dataset is updated (e.g., Daily, Weekly, Monthly, Annually). Time Spam The overall time period the dataset covers. Start Date The beginning date of the data collection period. End Date The end date of the data collection period Geographic Coverage The geographic area that the dataset pertains to (e.g., Louisville Metro). Geographic Granularity The level of geographic detail (e.g., parcel, neighborhood, ZIP code). Link to Existing Publication A URL linking to the dataset’s public-facing page or open data portal entry.

Overview

Empower your location data visualizations with our edge-matched polygons, even in difficult geographies.

Our self-hosted geospatial data cover administrative and postal divisions with up to 5 precision levels. All levels follow a seamless hierarchical structure with no gaps or overlaps.

The geospatial data shapes are offered in high-precision and visualization resolution and are easily customized on-premise.

Use cases for the Global Administrative Boundaries Database (Geospatial data, Map data)

• In-depth spatial analysis

• Clustering

• Geofencing

• Reverse Geocoding

• Reporting and Business Intelligence (BI)

Product Features

• Coherence and precision at every level

• Edge-matched polygons

• High-precision shapes for spatial analysis

• Fast-loading polygons for reporting and BI

• Multi-language support

For additional insights, you can combine the map data with:

• Population data: Historical and future trends

• UNLOCODE and IATA codes

• Time zones and Daylight Saving Time (DST)

Data export methodology

Our location data packages are offered in variable formats, including - .shp - .gpkg - .kml - .shp - .gpkg - .kml - .geojson

All geospatial data are optimized for seamless integration with popular systems like Esri ArcGIS, Snowflake, QGIS, and more.

Why companies choose our map data

• Precision at every level

• Coverage of difficult geographies

• No gaps, nor overlaps

Note: Custom geospatial data packages are available. Please submit a request via the above contact button for more details.

This layer is a component of 2007_NAIP_COVERAGE_3.mxd.

This layer is a component of SC Statewide Address Points and Centerlines.

© SC DOT, SC Counties, SC Geographic Information Council