This data was developed in response to citizens’ road maintenance requests from across the state as to whom to contact as the official maintenance authority - be it MDOT State Highway Administration, MDOT Transportation Authority, a county, or a municipality.MDOT SHA Website

MD/PA Sandy Supplemental Lidar Data Acquisition and Processing Production Task USGS Contract No. G10PC00057 Task Order No. G14PD00397 Woolpert Order No. 74333 CONTRACTOR: Woolpert, Inc. This task is for a high resolution data set of lidar covering approximately 1,845 square miles. The lidar data was acquired and processed under the requirements identified in this task order. Lidar data is a remotely sensed high resolution elevation data collected by an airborne platform. The lidar sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The lidar systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meters. The final products include classified LAS, one (1) meter pixel raster DEMs of the bare-earth surface in ERDAS IMG Format, and 8-bit intensity images. Each LAS file contains lidar point information, which has been calibrated, controlled, and classified. Additional deliverables include hydrologic breakline data, control data, tile index, lidar processing and survey reports in PDF format, FGDC metadata files for each data deliverable in .xml format, and LAS swath data. Ground conditions: Water at normal levels; no unusual inundation; no snow; leaf off. Coastal tiles 18SVH065720 and 8SVH095690 contain no lidar points as they exist completely in water. A DEM IMG was generated for these two tiles as the digitized hydro breakline assumed the data extent in the area. As such only 2568 LAS and Intensity files will be delivered along with 2570 DEM IMG's.This is a MD iMAP hosted service. Find more information at https://imap.maryland.gov.Image Service Link: https://mdgeodata.md.gov/lidar/rest/services/Kent/MD_kent_hillshade_m/ImageServer

MD/PA Sandy Supplemental Lidar Data Acquisition and Processing Production Task USGS Contract No. G10PC00057 Task Order No. G14PD00397 Woolpert Order No. 74333 CONTRACTOR: Woolpert, Inc. This task is for a high resolution data set of lidar covering approximately 1,845 square miles. The lidar data was acquired and processed under the requirements identified in this task order. Lidar data is a remotely sensed high resolution elevation data collected by an airborne platform. The lidar sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The lidar systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meters. The final products include classified LAS, one (1) meter pixel raster DEMs of the bare-earth surface in ERDAS IMG Format, and 8-bit intensity images. Each LAS file contains lidar point information, which has been calibrated, controlled, and classified. Additional deliverables include hydrologic breakline data, control data, tile index, lidar processing and survey reports in PDF format, FGDC metadata files for each data deliverable in .xml format, and LAS swath data. Ground conditions: Water at normal levels; no unusual inundation; no snow; leaf off. Coastal tiles 18SVH065720 and 8SVH095690 contain no lidar points as they exist completely in water. A DEM IMG was generated for these two tiles as the digitized hydro breakline assumed the data extent in the area. As such only 2568 LAS and Intensity files will be delivered along with 2570 DEM IMG's.This is a MD iMAP hosted service. Find more information at https://imap.maryland.gov.Image Service Link: https://mdgeodata.md.gov/lidar/rest/services/Kent/MD_kent_dem_ft/ImageServer

These data were automated to provide an accurate high-resolution historical shoreline of Kent Island, MD suitable as a geographic information system (GIS) data layer. These data are derived from shoreline maps that were produced by the NOAA National Ocean Service including its predecessor agencies which were based on an office interpretation of imagery and/or field survey. The NGS attribution scheme 'Coastal Cartographic Object Attribute Source Table (C-COAST)' was developed to conform the attribution of various sources of shoreline data into one attribution catalog. C-COAST is not a recognized standard, but was influenced by the International Hydrographic Organization's S-57 Object-Attribute standard so the data would be more accurately translated into S-57. This resource is a member of https://inport.nmfs.noaa.gov/inport/item/39808

These data were automated to provide an accurate high-resolution historical shoreline of Kent Island, Maryland suitable as a geographic information system (GIS) data layer. These data are derived from shoreline maps that were produced by the NOAA National Ocean Service including its predecessor agencies which were based on an office interpretation of imagery and/or field survey. The NGS attribution scheme 'Coastal Cartographic Object Attribute Source Table (C-COAST)' was developed to conform the attribution of various sources of shoreline data into one attribution catalog. C-COAST is not a recognized standard, but was influenced by the International Hydrographic Organization's S-57 Object-Attribute standard so the data would be more accurately translated into S-57. This resource is a member of https://www.fisheries.noaa.gov/inport/item/39808

MD/PA Sandy Supplemental Lidar Data Acquisition and Processing Production Task USGS Contract No. G10PC00057 Task Order No. G14PD00397 Woolpert Order No. 74333 CONTRACTOR: Woolpert, Inc. This task is for a high resolution data set of lidar covering approximately 1,845 square miles. The lidar data was acquired and processed under the requirements identified in this task order. Lidar data is a remotely sensed high resolution elevation data collected by an airborne platform. The lidar sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The lidar systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meters. The final products include classified LAS, one (1) meter pixel raster DEMs of the bare-earth surface in ERDAS IMG Format, and 8-bit intensity images. Each LAS file contains lidar point information, which has been calibrated, controlled, and classified. Additional deliverables include hydrologic breakline data, control data, tile index, lidar processing and survey reports in PDF format, FGDC metadata files for each data deliverable in .xml format, and LAS swath data. Ground conditions: Water at normal levels; no unusual inundation; no snow; leaf off. Coastal tiles 18SVH065720 and 8SVH095690 contain no lidar points as they exist completely in water. A DEM IMG was generated for these two tiles as the digitized hydro breakline assumed the data extent in the area. As such only 2568 LAS and Intensity files will be delivered along with 2570 DEM IMG's.This is a MD iMAP hosted service. Find more information at https://imap.maryland.gov.Image Service Link: https://mdgeodata.md.gov/lidar/rest/services/Kent/MD_kent_dem_m/ImageServer

MD/PA Sandy Supplemental Lidar Data Acquisition and Processing Production Task USGS Contract No. G10PC00057 Task Order No. G14PD00397 Woolpert Order No. 74333 CONTRACTOR: Woolpert, Inc. This task is for a high resolution data set of lidar covering approximately 1,845 square miles. The lidar data was acquired and processed under the requirements identified in this task order. Lidar data is a remotely sensed high resolution elevation data collected by an airborne platform. The lidar sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The lidar systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meters. The final products include classified LAS, one (1) meter pixel raster DEMs of the bare-earth surface in ERDAS IMG Format, and 8-bit intensity images. Each LAS file contains lidar point information, which has been calibrated, controlled, and classified. Additional deliverables include hydrologic breakline data, control data, tile index, lidar processing and survey reports in PDF format, FGDC metadata files for each data deliverable in .xml format, and LAS swath data. Ground conditions: Water at normal levels; no unusual inundation; no snow; leaf off. Coastal tiles 18SVH065720 and 8SVH095690 contain no lidar points as they exist completely in water. A DEM IMG was generated for these two tiles as the digitized hydro breakline assumed the data extent in the area. As such only 2568 LAS and Intensity files will be delivered along with 2570 DEM IMG's.This is a MD iMAP hosted service. Find more information at https://imap.maryland.gov.Image Service Link: https://mdgeodata.md.gov/lidar/rest/services/Kent/MD_kent_shadedRelief_RGB/ImageServer

State of Maryland municipality boundary dataset.Maryland Department of Planning (MDP) maps annexations from municipalities. This dataset is created and maintained by the Maryland Department of Planning. These boundaries are not intended to serve as a legal description. Fields:MUN_NAME (Municipality Name): Name of Municipality located in Maryland.RESOLUTION_NUMBER (Resolution Number): Local Municipality Annexation Resolution Number.ANNEXATION_DATE (Annexation Date) (DD/MM/YYYY): The Annexation Date field shows when there's been a change in the boundary. This date is known as the “Effective Date” from the municipality. The date 1/1/1997 is used as a default date of when annexation changes were first indicated in the GIS layer and not necessarily of when it was actually annexed. If there's a date of 1/1/1997, it can be assumed that the annexation occurred on this date or before. For example, for Baltimore City, the city boundary was determined hundreds of years ago. Other than that default date, the date will show when the property was annexed. ACRES (GIS Acres): GIS calculated acres.JURSCODE (Jurisdiction Code) – Four letter county code: ALLE (Allegany), ANNE (Anne Arundel), BACI (Baltimore City), BACO (Baltimore County), CALV (Calvert), CARO (Caroline), CARR (Carroll), CECI (Cecil), CHAR (Charles), DORC (Dorchester), FRED (Frederick), GARR (Garrett), HARF (Harford), HOWA (Howard), KENT (Kent), MONT (Montgomery), PRIN (Prince George’s) QUEE (Queen Anne’s), SOME (Somerset), STMA (St. Mary’s), TALB (Talbot), WASH (Washington), WICO (Wicomico), WORC (Worcester).This is a MD iMAP hosted service. Find more information on https://imap.maryland.govhttps://mdgeodata.md.gov/imap/rest/services/Boundaries/MD_PoliticalBoundaries/FeatureServer/5

MD/PA Sandy Supplemental Lidar Data Acquisition and Processing Production Task USGS Contract No. G10PC00057 Task Order No. G14PD00397 Woolpert Order No. 74333 CONTRACTOR: Woolpert, Inc. This task is for a high resolution data set of lidar covering approximately 1,845 square miles. The lidar data was acquired and processed under the requirements identified in this task order. Lidar data is a remotely sensed high resolution elevation data collected by an airborne platform. The lidar sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The lidar systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meters. The final products include classified LAS, one (1) meter pixel raster DEMs of the bare-earth surface in ERDAS IMG Format, and 8-bit intensity images. Each LAS file contains lidar point information, which has been calibrated, controlled, and classified. Additional deliverables include hydrologic breakline data, control data, tile index, lidar processing and survey reports in PDF format, FGDC metadata files for each data deliverable in .xml format, and LAS swath data. Ground conditions: Water at normal levels; no unusual inundation; no snow; leaf off. Coastal tiles 18SVH065720 and 8SVH095690 contain no lidar points as they exist completely in water. A DEM IMG was generated for these two tiles as the digitized hydro breakline assumed the data extent in the area. As such only 2568 LAS and Intensity files will be delivered along with 2570 DEM IMG's.This is a MD iMAP hosted service. Find more information at https://imap.maryland.gov.Image Service Link: https://mdgeodata.md.gov/lidar/rest/services/Kent/MD_kent_slope_m/ImageServer

This is a MD iMAP hosted service layer. Find more information at http://imap.maryland.gov. The Blue Infrastructure study area and extent of inventory data was defined as the 16 coastal zone counties (Anne Arundel - Baltimore - Calvert - Caroline - Cecil - Charles - Dorchester - Harford - Kent - Prince George's - Queen Anne's - Somerset - St. Mary's - Talbot - Wicomico - and Worcester) and Baltimore City. Including Baltimore City makes a total of 17 designated locations based on sixteen County Boundaries and one City Boundary. Four main models were created to perform the overlay processes to calculate the Zonal Majority used to determine the total rank for all the segments. The Blue Infrastructure assessment was designed as a spatial evaluation of coastal habitat - critical natural resources and associated human uses in the tidal waters and near-shore areas of Maryland's coastal zone. The Assessment is used to identify near-shore tidal habitat priority areas that support coastal habitats and the resources and economies that depend upon them. The Blue Infrastructure was developed through a partnership between the Maryland Department of Natural Resources' Chesapeake and Coastal Program - the National Oceanic and Atmospheric Administration and Towson University's Center for GIS. Last Updated: 5/1/2010 Feature Service Layer Link: https://mdgeodata.md.gov/imap/rest/services/Hydrology/MD_BlueInfrastructure/FeatureServer ADDITIONAL LICENSE TERMS: The Spatial Data and the information therein (collectively "the Data") is provided "as is" without warranty of any kind either expressed implied or statutory. The user assumes the entire risk as to quality and performance of the Data. No guarantee of accuracy is granted nor is any responsibility for reliance thereon assumed. In no event shall the State of Maryland be liable for direct indirect incidental consequential or special damages of any kind. The State of Maryland does not accept liability for any damages or misrepresentation caused by inaccuracies in the Data or as a result to changes to the Data nor is there responsibility assumed to maintain the Data in any manner or form. The Data can be freely distributed as long as the metadata entry is not modified or deleted. Any data derived from the Data must acknowledge the State of Maryland in the metadata.

Esri ArcGIS Online (AGOL) Map Image Layer for accessing the Maryland Coast Smart - Climate Ready Action Boundary (CRAB) Inundated Zones data product.Maryland Coast Smart - Climate Ready Action Boundary (CRAB) Inundated Zones consists of polygon geometric features which represent the geographic areas throughout the State of Maryland that are impacted by CRAB inundation (0 to 1ft, 1 to 2ft, and 2ft or more).The Maryland Coast Smart - Climate Ready Action Boundary (CRAB) Inundated Zones data product was created using a GIS spatial analysis model, unique for each county in the State of Maryland. Coastal counties follow an analysis methodology that incorporates FEMA Stillwater wave action as it is understood from the FEMA identified VE zones. A Water Surface Elevation (WSE) and Still Water Elevation (SWEL) rasters are used as the baseline to identify existing water depths within each county. For all flood zones that are not classified as VE the WSE three feet was added to reflect a three-foot rise in the base flood elevations. For those WSEs falling within a FEMA floodplain identified V Zone, six feet was added (three feet for the increase in flood elevations for the CS-CRAB, and 3 feet to compensate for the minimum of 3 foot wave action typically mapped by FEMA) / wave heights greater than 3 feet were reduced to the 3 foot minimum for consistency across the shoreline. The newly calculated WSE plus three datasets were then converted to points and merged. Next, an Inverse Distance Weighted (IDW) Interpolation was used to compute the proportional weighted values between the WSE point locations based on proximity. The DEM for each county is then subtracted from the new IDW raster in order to show precise water locations as they relate to the land elevation, producing a freeboard depth grid representing the depth of flood waters above the existing ground elevation given a 3 foot increase in water level. A course resolution QAQC was applied to remove “islands” of data associated with DEM inaccuracies and other elevation anomalies. The analysis was run at a1 ft x 1 ft raster resolution. The DEM accuracy for each county varies based what is currently available. Here the breakdown of DEM accuracy for each county used in this project: Anne Arundel County DEM year is 2017 and horizontal resolution is 1ft. Baltimore County DEM year is 2015 and horizontal resolution is 2.5ft. Baltimore City DEM year is 2015 and horizontal resolution is 0.7m. Calvert County DEM year is 2017 and horizontal resolution is 1ft. Caroline County DEM year is 2013 and horizontal resolution is 3.125ft. Cecil county DEM year is 2013 and horizontal resolution is 0.6m. Charles County DEM year is 2014 and horizontal resolution is 0.9m. Dorchester County DEM year is 2013 and horizontal resolution is 0.9m. Harford County DEM is 2013 and horizontal accuracy is 1.5m. Kent County DEM year is 2015 and horizontal resolution is 0.7m. Prince George’s County DEM year is 2014 and horizontal resolution is 0.7m. Queen Anne’s County DEM year is 2013 and horizontal resolution is 0.6m. Somerset County DEM year is 2012 and horizontal accuracy is 1m. St Mary’s County DEM year is 2014 and Horizontal accuracy is 0.9m. Talbot County DEM year is 2015 and Horizontal accuracy is 0.7m. Wicomico County DEM year is 2012 and horizontal accuracy is 1m. Worchester County DEM year is 2011 and horizontal accuracy is 1m.The Maryland Coast Smart - Climate Ready Action Boundary (CRAB) Inundated Zones data product was created by the Maryland Environmental Service (MES) in partnership with the Maryland Department of Environment (MDE) and the Coast Smart Council, under the guidance of the Maryland Department of Natural Resource (DNR).For additional information, contact MDOT SHA OIT Enterprise Information Services:Email: GIS@mdot.maryland.gov

State of Maryland Priority Funding Area boundary dataset. This dataset is created and maintained by the Maryland Department of Planning. These boundaries are not intended to serve as a legal description. Fields:CPFA (Certified PFA): If field is populated as “IN” then the PFA has been designated at a Priority Funding Area locally. MUN_CODE (Municipality Code): MUN = within Priority Funding Area (PFA); MUNCOM = PFA with comment; MUN_NONPFA = not in PFA Rural Village Code (RUVI_CODE): RV = within a Rural Village Rural Village Name (RUVI_NAME): Name of the Rural Village COMMENT_STATUS (Comment Status): If field is populated with “NO” then there is no state-placed comment on the area. If the field is populated with “YES” then the state has placed a comment on the area based on eligibility. ACRES (GIS Acres): GIS calculated acres. JURSCODE (Jurisdiction Code) – Four letter county code: ALLE (Allegany), ANNE (Anne Arundel), BACI (Baltimore City), BACO (Baltimore County), CALV (Calvert), CARO (Caroline), CARR (Carroll), CECI (Cecil), CHAR (Charles), DORC (Dorchester), FRED (Frederick), GARR (Garrett), HARF (Harford), HOWA (Howard), KENT (Kent), MONT (Montgomery), PRIN (Prince George’s) QUEE (Queen Anne’s), SOME (Somerset), STMA (St. Mary’s), TALB (Talbot), WASH (Washington), WICO (Wicomico), WORC (Worcester).CERT_DATE (Certification Date) (DD/MM/YYYY): This date is known as the “Certification Date” of the PFA. The date 1/1/1997, or NULL, is used as a default date of when the PFA was certified were first indicated in the GIS layer and not necessarily of when it was actually certified. If there's a date of 1/1/1997, it can be assumed that the PFA was certified on, or before this date. STATE_ELIGIBLE_STATUS (State Eligible): This field is based on whether the PFA has a comment. If there is no comment, then the field will be populated with YES; if there is a state-placed comment, the field will be populated with NO. Point of Contact: Ellen Mussman ellen.mussman@maryland.gov and Meagan Fairfield-Peak meagan.fairfieldpeak@maryland.govDate Last Updated 10/22/2024This is a MD iMAP hosted service. Find more information on https://imap.maryland.gov.https://mdgeodata.md.gov/imap/rest/services/PlanningCadastre/MD_PriorityFundingAreas/FeatureServer/0

The Blue Infrastructure study area and extent of inventory data was defined as the 16 coastal zone counties (Anne Arundel, Baltimore, Calvert, Caroline, Cecil, Charles, Dorchester, Harford, Kent, Prince George's, Queen Anne's, Somerset, St. Mary's, Talbot, Wicomico, and Worcester) and Baltimore City. Including Baltimore City makes a total of 17 designated locations based on sixteen County Boundaries and one City Boundary. Four main models were created to perform the overlay processes to calculate the Zonal Majority used to determine the total rank for all the segments. The Blue Infrastructure assessment was designed as a spatial evaluation of coastal habitat, critical natural resources and associated human uses in the tidal waters and near-shore areas of Maryland's coastal zone. The Assessment is used to identify near-shore tidal habitat priority areas that support coastal habitats and the resources and economies that depend upon them. The Blue Infrastructure was developed through a partnership between the Maryland Department of Natural Resources' Chesapeake and Coastal Program, the National Oceanic and Atmospheric Administration and Towson University's Center for GIS.This is a MD iMAP hosted service layer. Find more information at https://imap.maryland.gov.Feature Service Layer Link:https://mdgeodata.md.gov/imap/rest/services/Hydrology/MD_BlueInfrastructure/FeatureServer/0

Maryland Department of Planning (MDP) maps annexations from municipalities. This dataset is created and maintained by the Maryland Department of Planning. These boundaries are not intended to serve as a legal description. Fields:Municipality Name: Name of Municipality located in Maryland.Jurisdiction Code – Four letter county code: ALLE (Allegany), ANNE (Anne Arundel), BACI (Baltimore City), BACO (Baltimore County), CALV (Calvert), CARO (Caroline), CARR (Carroll), CECI (Cecil), CHAR (Charles), DORC (Dorchester), FRED (Frederick), GARR (Garrett), HARF (Harford), HOWA (Howard), KENT (Kent), MONT (Montgomery), PRIN (Prince George’s) QUEE (Queen Anne’s), SOME (Somerset), STMA (St. Mary’s), TALB (Talbot), WASH (Washington), WICO (Wicomico), WORC (Worcester). Date Last Updated: 07/30/2024