Russia is the largest country in the world by far, with a total area of just over 17 million square kilometers. After Antarctica, the next three countries are Canada, the U.S., and China; all between 9.5 and 10 million square kilometers. The figures given include internal water surface area (such as lakes or rivers) - if the figures were for land surface only then China would be the second largest country in the world, the U.S. third, and Canada (the country with more lakes than the rest of the world combined) fourth. Russia Russia has a population of around 145 million people, putting it in the top ten most populous countries in the world, and making it the most populous in Europe. However, it's vast size gives it a very low population density, ranked among the bottom 20 countries. Most of Russia's population is concentrated in the west, with around 75 percent of the population living in the European part, while around 75 percent of Russia's territory is in Asia; the Ural Mountains are considered the continental border. Elsewhere in the world Beyond Russia, the world's largest countries all have distinctive topographies and climates setting them apart. The United States, for example, has climates ranging from tundra in Alaska to tropical forests in Florida, with various mountain ranges, deserts, plains, and forests in between. Populations in these countries are often concentrated in urban areas, and are not evenly distributed across the country. For example, around 85 percent of Canada's population lives within 100 miles of the U.S. border; around 95 percent of China lives east of the Heihe–Tengchong Line that splits the country; and the majority of populations in large countries such as Australia or Brazil live near the coast.

Russia is the largest country in Europe, and also the largest in the world, its total size amounting to 17 million square kilometers (km2). It should be noted, however, that over three quarters of Russia is located in Asia, and the Ural mountains are often viewed as the meeting point of the two continents in Russia; nonetheless, European Russia is still significantly larger than any other European country. Ukraine, the second largest country on the continent, is only 603,000 km2, making it about 28 times smaller than its eastern neighbor, or seven times smaller than the European part of Russia. France is the third largest country in Europe, but the largest in the European Union. The Vatican City, often referred to as the Holy Sea, is both the smallest country in Europe and in the world, at just one km2. Population Russia is also the most populous country in Europe. It has around 144 million inhabitants across the country; in this case, around three quarters of the population live in the European part, which still gives it the largest population in Europe. Despite having the largest population, Russia is a very sparsely populated country due to its size and the harsh winters. Germany is the second most populous country in Europe, with 83 million inhabitants, while the Vatican has the smallest population. Worldwide, India and China are the most populous countries, with approximately 1.4 billion inhabitants each. Cities Moscow in Russia is ranked as the most populous city in Europe with around 13 million inhabitants, although figures vary, due to differences in the methodologies used by countries and sources. Some statistics include Istanbul in Turkey* as the largest city in Europe with its 15 million inhabitants, bit it has been excluded here as most of the country and parts of the city is located in Asia. Worldwide, Tokyo is the most populous city, with Jakarta the second largest and Delhi the third.

The statistic shows the largest countries in South America, based on land area. Brazil is the largest country by far, with a total area of over 8.5 million square kilometers, followed by Argentina, with almost 2.8 million square kilometers.

Description

This comprehensive dataset provides a wealth of information about all countries worldwide, covering a wide range of indicators and attributes. It encompasses demographic statistics, economic indicators, environmental factors, healthcare metrics, education statistics, and much more. With every country represented, this dataset offers a complete global perspective on various aspects of nations, enabling in-depth analyses and cross-country comparisons.

Key Features

Country: Name of the country.

Density (P/Km2): Population density measured in persons per square kilometer.

Abbreviation: Abbreviation or code representing the country.

Agricultural Land (%): Percentage of land area used for agricultural purposes.

Land Area (Km2): Total land area of the country in square kilometers.

Armed Forces Size: Size of the armed forces in the country.

Birth Rate: Number of births per 1,000 population per year.

Calling Code: International calling code for the country.

Capital/Major City: Name of the capital or major city.

CO2 Emissions: Carbon dioxide emissions in tons.

CPI: Consumer Price Index, a measure of inflation and purchasing power.

CPI Change (%): Percentage change in the Consumer Price Index compared to the previous year.

Currency_Code: Currency code used in the country.

Fertility Rate: Average number of children born to a woman during her lifetime.

Forested Area (%): Percentage of land area covered by forests.

Gasoline_Price: Price of gasoline per liter in local currency.

GDP: Gross Domestic Product, the total value of goods and services produced in the country.

Gross Primary Education Enrollment (%): Gross enrollment ratio for primary education.

Gross Tertiary Education Enrollment (%): Gross enrollment ratio for tertiary education.

Infant Mortality: Number of deaths per 1,000 live births before reaching one year of age.

Largest City: Name of the country's largest city.

Life Expectancy: Average number of years a newborn is expected to live.

Maternal Mortality Ratio: Number of maternal deaths per 100,000 live births.

Minimum Wage: Minimum wage level in local currency.

Official Language: Official language(s) spoken in the country.

Out of Pocket Health Expenditure (%): Percentage of total health expenditure paid out-of-pocket by individuals.

Physicians per Thousand: Number of physicians per thousand people.

Population: Total population of the country.

Population: Labor Force Participation (%): Percentage of the population that is part of the labor force.

Tax Revenue (%): Tax revenue as a percentage of GDP.

Total Tax Rate: Overall tax burden as a percentage of commercial profits.

Unemployment Rate: Percentage of the labor force that is unemployed.

Urban Population: Percentage of the population living in urban areas.

Latitude: Latitude coordinate of the country's location.

Longitude: Longitude coordinate of the country's location.

Potential Use Cases

Analyze population density and land area to study spatial distribution patterns.

Investigate the relationship between agricultural land and food security.

Examine carbon dioxide emissions and their impact on climate change.

Explore correlations between economic indicators such as GDP and various socio-economic factors.

Investigate educational enrollment rates and their implications for human capital development.

Analyze healthcare metrics such as infant mortality and life expectancy to assess overall well-being.

Study labor market dynamics through indicators such as labor force participation and unemployment rates.

Investigate the role of taxation and its impact on economic development.

Explore urbanization trends and their social and environmental consequences.

Overview The Office of the Geographer and Global Issues at the U.S. Department of State produces the Large Scale International Boundaries (LSIB) dataset. The current edition is version 11.4 (published 24 February 2025). The 11.4 release contains updated boundary lines and data refinements designed to extend the functionality of the dataset. These data and generalized derivatives are the only international boundary lines approved for U.S. Government use. The contents of this dataset reflect U.S. Government policy on international boundary alignment, political recognition, and dispute status. They do not necessarily reflect de facto limits of control. National Geospatial Data Asset This dataset is a National Geospatial Data Asset (NGDAID 194) managed by the Department of State. It is a part of the International Boundaries Theme created by the Federal Geographic Data Committee. Dataset Source Details Sources for these data include treaties, relevant maps, and data from boundary commissions, as well as national mapping agencies. Where available and applicable, the dataset incorporates information from courts, tribunals, and international arbitrations. The research and recovery process includes analysis of satellite imagery and elevation data. Due to the limitations of source materials and processing techniques, most lines are within 100 meters of their true position on the ground. Cartographic Visualization The LSIB is a geospatial dataset that, when used for cartographic purposes, requires additional styling. The LSIB download package contains example style files for commonly used software applications. The attribute table also contains embedded information to guide the cartographic representation. Additional discussion of these considerations can be found in the Use of Core Attributes in Cartographic Visualization section below. Additional cartographic information pertaining to the depiction and description of international boundaries or areas of special sovereignty can be found in Guidance Bulletins published by the Office of the Geographer and Global Issues: https://data.geodata.state.gov/guidance/index.html Contact Direct inquiries to internationalboundaries@state.gov. Direct download: https://data.geodata.state.gov/LSIB.zip Attribute Structure The dataset uses the following attributes divided into two categories: ATTRIBUTE NAME | ATTRIBUTE STATUS CC1 | Core CC1_GENC3 | Extension CC1_WPID | Extension COUNTRY1 | Core CC2 | Core CC2_GENC3 | Extension CC2_WPID | Extension COUNTRY2 | Core RANK | Core LABEL | Core STATUS | Core NOTES | Core LSIB_ID | Extension ANTECIDS | Extension PREVIDS | Extension PARENTID | Extension PARENTSEG | Extension These attributes have external data sources that update separately from the LSIB: ATTRIBUTE NAME | ATTRIBUTE STATUS CC1 | GENC CC1_GENC3 | GENC CC1_WPID | World Polygons COUNTRY1 | DoS Lists CC2 | GENC CC2_GENC3 | GENC CC2_WPID | World Polygons COUNTRY2 | DoS Lists LSIB_ID | BASE ANTECIDS | BASE PREVIDS | BASE PARENTID | BASE PARENTSEG | BASE The core attributes listed above describe the boundary lines contained within the LSIB dataset. Removal of core attributes from the dataset will change the meaning of the lines. An attribute status of “Extension” represents a field containing data interoperability information. Other attributes not listed above include “FID”, “Shape_length” and “Shape.” These are components of the shapefile format and do not form an intrinsic part of the LSIB. Core Attributes The eight core attributes listed above contain unique information which, when combined with the line geometry, comprise the LSIB dataset. These Core Attributes are further divided into Country Code and Name Fields and Descriptive Fields. County Code and Country Name Fields “CC1” and “CC2” fields are machine readable fields that contain political entity codes. These are two-character codes derived from the Geopolitical Entities, Names, and Codes Standard (GENC), Edition 3 Update 18. “CC1_GENC3” and “CC2_GENC3” fields contain the corresponding three-character GENC codes and are extension attributes discussed below. The codes “Q2” or “QX2” denote a line in the LSIB representing a boundary associated with areas not contained within the GENC standard. The “COUNTRY1” and “COUNTRY2” fields contain the names of corresponding political entities. These fields contain names approved by the U.S. Board on Geographic Names (BGN) as incorporated in the ‘"Independent States in the World" and "Dependencies and Areas of Special Sovereignty" lists maintained by the Department of State. To ensure maximum compatibility, names are presented without diacritics and certain names are rendered using common cartographic abbreviations. Names for lines associated with the code "Q2" are descriptive and not necessarily BGN-approved. Names rendered in all CAPITAL LETTERS denote independent states. Names rendered in normal text represent dependencies, areas of special sovereignty, or are otherwise presented for the convenience of the user. Descriptive Fields The following text fields are a part of the core attributes of the LSIB dataset and do not update from external sources. They provide additional information about each of the lines and are as follows: ATTRIBUTE NAME | CONTAINS NULLS RANK | No STATUS | No LABEL | Yes NOTES | Yes Neither the "RANK" nor "STATUS" fields contain null values; the "LABEL" and "NOTES" fields do. The "RANK" field is a numeric expression of the "STATUS" field. Combined with the line geometry, these fields encode the views of the United States Government on the political status of the boundary line. ATTRIBUTE NAME | | VALUE | RANK | 1 | 2 | 3 STATUS | International Boundary | Other Line of International Separation | Special Line A value of “1” in the “RANK” field corresponds to an "International Boundary" value in the “STATUS” field. Values of ”2” and “3” correspond to “Other Line of International Separation” and “Special Line,” respectively. The “LABEL” field contains required text to describe the line segment on all finished cartographic products, including but not limited to print and interactive maps. The “NOTES” field contains an explanation of special circumstances modifying the lines. This information can pertain to the origins of the boundary lines, limitations regarding the purpose of the lines, or the original source of the line. Use of Core Attributes in Cartographic Visualization Several of the Core Attributes provide information required for the proper cartographic representation of the LSIB dataset. The cartographic usage of the LSIB requires a visual differentiation between the three categories of boundary lines. Specifically, this differentiation must be between: International Boundaries (Rank 1); Other Lines of International Separation (Rank 2); and Special Lines (Rank 3). Rank 1 lines must be the most visually prominent. Rank 2 lines must be less visually prominent than Rank 1 lines. Rank 3 lines must be shown in a manner visually subordinate to Ranks 1 and 2. Where scale permits, Rank 2 and 3 lines must be labeled in accordance with the “Label” field. Data marked with a Rank 2 or 3 designation does not necessarily correspond to a disputed boundary. Please consult the style files in the download package for examples of this depiction. The requirement to incorporate the contents of the "LABEL" field on cartographic products is scale dependent. If a label is legible at the scale of a given static product, a proper use of this dataset would encourage the application of that label. Using the contents of the "COUNTRY1" and "COUNTRY2" fields in the generation of a line segment label is not required. The "STATUS" field contains the preferred description for the three LSIB line types when they are incorporated into a map legend but is otherwise not to be used for labeling. Use of the “CC1,” “CC1_GENC3,” “CC2,” “CC2_GENC3,” “RANK,” or “NOTES” fields for cartographic labeling purposes is prohibited. Extension Attributes Certain elements of the attributes within the LSIB dataset extend data functionality to make the data more interoperable or to provide clearer linkages to other datasets. The fields “CC1_GENC3” and “CC2_GENC” contain the corresponding three-character GENC code to the “CC1” and “CC2” attributes. The code “QX2” is the three-character counterpart of the code “Q2,” which denotes a line in the LSIB representing a boundary associated with a geographic area not contained within the GENC standard. To allow for linkage between individual lines in the LSIB and World Polygons dataset, the “CC1_WPID” and “CC2_WPID” fields contain a Universally Unique Identifier (UUID), version 4, which provides a stable description of each geographic entity in a boundary pair relationship. Each UUID corresponds to a geographic entity listed in the World Polygons dataset. These fields allow for linkage between individual lines in the LSIB and the overall World Polygons dataset. Five additional fields in the LSIB expand on the UUID concept and either describe features that have changed across space and time or indicate relationships between previous versions of the feature. The “LSIB_ID” attribute is a UUID value that defines a specific instance of a feature. Any change to the feature in a lineset requires a new “LSIB_ID.” The “ANTECIDS,” or antecedent ID, is a UUID that references line geometries from which a given line is descended in time. It is used when there is a feature that is entirely new, not when there is a new version of a previous feature. This is generally used to reference countries that have dissolved. The “PREVIDS,” or Previous ID, is a UUID field that contains old versions of a line. This is an additive field, that houses all Previous IDs. A new version of a feature is defined by any change to the

All cities with a population > 1000 or seats of adm div (ca 80.000)Sources and ContributionsSources : GeoNames is aggregating over hundred different data sources. Ambassadors : GeoNames Ambassadors help in many countries. Wiki : A wiki allows to view the data and quickly fix error and add missing places. Donations and Sponsoring : Costs for running GeoNames are covered by donations and sponsoring.Enrichment:add country name

In 2025, India overtook China as the world's most populous country and now has almost 1.46 billion people. China now has the second-largest population in the world, still with just over 1.4 billion inhabitants, however, its population went into decline in 2023. Global population As of 2025, the world's population stands at almost 8.2 billion people and is expected to reach around 10.3 billion people in the 2080s, when it will then go into decline. Due to improved healthcare, sanitation, and general living conditions, the global population continues to increase; mortality rates (particularly among infants and children) are decreasing and the median age of the world population has steadily increased for decades. As for the average life expectancy in industrial and developing countries, the gap has narrowed significantly since the mid-20th century. Asia is the most populous continent on Earth; 11 of the 20 largest countries are located there. It leads the ranking of the global population by continent by far, reporting four times as many inhabitants as Africa. The Demographic Transition The population explosion over the past two centuries is part of a phenomenon known as the demographic transition. Simply put, this transition results from a drastic reduction in mortality, which then leads to a reduction in fertility, and increase in life expectancy; this interim period where death rates are low and birth rates are high is where this population explosion occurs, and population growth can remain high as the population ages. In today's most-developed countries, the transition generally began with industrialization in the 1800s, and growth has now stabilized as birth and mortality rates have re-balanced. Across less-developed countries, the stage of this transition varies; for example, China is at a later stage than India, which accounts for the change in which country is more populous - understanding the demographic transition can help understand the reason why China's population is now going into decline. The least-developed region is Sub-Saharan Africa, where fertility rates remain close to pre-industrial levels in some countries. As these countries transition, they will undergo significant rates of population growth.

Large Scale International Boundaries

Version 11.1 Release Date: August 22, 2022

Overview

The Office of the Geographer and Global Issues at the U.S. Department of State produces the Large Scale International Boundaries (LSIB) dataset. These data and their derivatives are the only international boundary lines approved for U.S. Government use. They reflect U.S. Government policy, and not necessarily de facto limits of control. This dataset is a National Geospatial Data Asset.

Details

Sources for these data include treaties, relevant maps, and data from boundary commissions and national mapping agencies. Where available, the dataset incorporates information from courts, tribunals, and international arbitrations. The research and recovery of the data involves analysis of satellite imagery and elevation data. Due to the limitations of source materials and processing techniques, most lines are within 100 meters of their true position on the ground.

Attributes

The dataset uses the following attributes: Attribute Name Explanation Country Code Country-level codes are from the Geopolitical Entities, Names, and Codes Standard (GENC). The Q2 code denotes a line representing a boundary associated with an area not in GENC. Country Names Names approved by the U.S. Board on Geographic Names (BGN). Names for lines associated with a Q2 code are descriptive and are not necessarily BGN-approved. Label Required text label for the line segment where scale permits Rank/Status Rank 1: International Boundary Rank 2: Other Line of International Separation Rank 3: Special Line Notes Explanation of any applicable special circumstances Cartographic Usage Depiction of the LSIB requires a visual differentiation between the three categories of boundaries: International Boundaries (Rank 1), Other Lines of International Separation (Rank 2), and Special Lines (Rank 3). Rank 1 lines must be the most visually prominent. Rank 2 lines must be less visually prominent than Rank 1 lines. Rank 3 lines must be shown in a manner visually subordinate to Ranks 1 and 2. Where scale permits, Rank 2 and 3 lines must be labeled in accordance with the “Label” field. Data marked with a Rank 2 or 3 designation does not necessarily correspond to a disputed boundary. Additional cartographic information can be found in Guidance Bulletins (https://hiu.state.gov/data/cartographic_guidance_bulletins/) published by the Office of the Geographer and Global Issues. Please direct inquiries to internationalboundaries@state.gov.

Credits

The lines in the LSIB dataset are the product of decades of collaboration between geographers at the Department of State and the National Geospatial-Intelligence Agency with contributions from the Central Intelligence Agency and the UK Defence Geographic Centre. Attribution is welcome: U.S. Department of State, Office of the Geographer and Global Issues.

Changes from Prior Release

This version of the LSIB contains changes and accuracy refinements for the following line segments. These changes reflect improvements in spatial accuracy derived from newly available source materials, an ongoing review process, or the publication of new treaties or agreements. Changes to lines include: • Akrotiri (UK) / Cyprus • Albania / Montenegro • Albania / Greece • Albania / North Macedonia • Armenia / Turkey • Austria / Czechia • Austria / Slovakia • Austria / Hungary • Austria / Slovenia • Austria / Germany • Austria / Italy • Austria / Switzerland • Azerbaijan / Turkey • Azerbaijan / Iran • Belarus / Latvia • Belarus / Russia • Belarus / Ukraine • Belarus / Poland • Bhutan / India • Bhutan / China • Bulgaria / Turkey • Bulgaria / Romania • Bulgaria / Serbia • Bulgaria / Romania • China / Tajikistan • China / India • Croatia / Slovenia • Croatia / Hungary • Croatia / Serbia • Croatia / Montenegro • Czechia / Slovakia • Czechia / Poland • Czechia / Germany • Finland / Russia • Finland / Norway • Finland / Sweden • France / Italy • Georgia / Turkey • Germany / Poland • Germany / Switzerland • Greece / North Macedonia • Guyana / Suriname • Hungary / Slovenia • Hungary / Serbia • Hungary / Romania • Hungary / Ukraine • Iran / Turkey • Iraq / Turkey • Italy / Slovenia • Italy / Switzerland • Italy / Vatican City • Italy / San Marino • Kazakhstan / Russia • Kazakhstan / Uzbekistan • Kosovo / north Macedonia • Kosovo / Serbia • Kyrgyzstan / Tajikistan • Kyrgyzstan / Uzbekistan • Latvia / Russia • Latvia / Lithuania • Lithuania / Poland • Lithuania / Russia • Moldova / Ukraine • Moldova / Romania • Norway / Russia • Norway / Sweden • Poland / Russia • Poland / Ukraine • Poland / Slovakia • Romania / Ukraine • Romania / Serbia • Russia / Ukraine • Syria / Turkey • Tajikistan / Uzbekistan

This release also contains topology fixes, land boundary terminus refinements, and tripoint adjustments.

Copyright Notice and Disclaimer

While U.S. Government works prepared by employees of the U.S. Government as part of their official duties are not subject to Federal copyright protection (see 17 U.S.C. § 105), copyrighted material incorporated in U.S. Government works retains its copyright protection. The works on or made available through download from the U.S. Department of State’s website may not be used in any manner that infringes any intellectual property rights or other proprietary rights held by any third party. Use of any copyrighted material beyond what is allowed by fair use or other exemptions may require appropriate permission from the relevant rightsholder. With respect to works on or made available through download from the U.S. Department of State’s website, neither the U.S. Government nor any of its agencies, employees, agents, or contractors make any representations or warranties—express, implied, or statutory—as to the validity, accuracy, completeness, or fitness for a particular purpose; nor represent that use of such works would not infringe privately owned rights; nor assume any liability resulting from use of such works; and shall in no way be liable for any costs, expenses, claims, or demands arising out of use of such works.

This data base contains gridded (one degree by one degree) information on the world-wide distribution of the population for 1990 and country-specific information on the percentage of the country's population present in each grid cell (Li, 1996a). Secondly, the data base contains the percentage of a country's total area in a grid cell and the country's percentage of the grid cell that is terrestrial (Li, 1996b). Li (1996b) also developed an indicator signifying how many countries are represented in a grid cell and if a grid cell is part of the sea; this indicator is only relevant for the land, countries, and sea-partitioning information of the grid cell. Thirdly, the data base includes the latitude and longitude coordinates of each grid cell; a grid code number, which is a translation of the latitude/longitude value and is used in the Global Emission Inventory Activity (GEIA) data bases; the country or region's name; and the United Nations three-digit country code that represents that name. For access to the data files, click this link to the CDIAC data transition website: http://cdiac.ess-dive.lbl.gov/ftp/db1016/

Country codes: ISO 2ISO 3UNLANGLABEL (EN, FR, SP)

Countries and territories is a controlled vocabulary that lists concepts associated with names of countries and territories. It is a corporate reference data asset covered by the Corporate Reference Data Management policy of the European Commission. It provides codes and names of geospatial and geopolitical entities in all official EU languages and is the result of a combination of multiple relevant standards, created to serve the requirements and use cases of the EU institutions services. Its main scope is to support documentary metadata activities. The codes of the concepts included are correlated with the ISO 3166 international standard. The authority code relies where possible on the ISO 3166-1 alpha-3 code. Additional user-assigned alpha-3 codes have been used to cover entities that are not included in the ISO 3166-1 standard. The corporate list contains mappings with the ISO 3166-1 two-letter codes, the Interinstitutional Style Guide codes and with other internal and external identifiers including ISO 3166-1 numeric, ISO 3166-3, UNSD M49, UNSD Geoscheme, IBAN, TIR, IANA domain. For the names of countries and territories, the corporate list synchronises with the Interinstitutional Style Guide (ISG, Section 7.1 and Annexes A5 and A6) and with the IATE terminology database. Membership and classification properties provide possibilities to group concepts, e.g., UN, EU, EEA, EFTA, Schengen area, Euro area, NATO, OECD, UCPM, ENP-EAST, ENP-SOUTH, EU candidate countries and potential candidates. Countries and territories is maintained by the Publications Office of the European Union and disseminated on the EU Vocabularies website. Regular updates are foreseen based on its stakeholders’ needs. Downloads in human-readable formats (.csv, .html) are also available.

ISO 3166-1-alpha-2 English country names and code elements. This list states the country names (official short names in English) in alphabetical order as given in ISO 3166-1 and the corresponding ISO 3166-1-alpha-2 code elements.

This dataset provides values for GDP reported in several countries. The data includes current values, previous releases, historical highs and record lows, release frequency, reported unit and currency.

The National Nakdong River Biological Resources Institute is opening up freshwater biological resource information that is being distributed as public data to promote the conservation and utilization of freshwater biological resources. The open data consists of resource number, scientific name, country name, classification system, institution name, large and medium divisions, taxonomic groups, and KTSN numbers. Academic and research institutions can explore biological resource research and industrial application possibilities through analysis of distribution characteristics of freshwater biological resources, biological diversity, and utilization potential by freshwater biological resources. Educational and cultural institutions can contribute to the operation of practical and highly immersive educational programs by utilizing the data as biological resource education content and experiential activity materials. Local governments and related organizations can utilize the regional distribution information of freshwater biological resources to foster regional specialized industries, develop freshwater biological resource-based tourism resources, and build cooperative networks.

The United States Office of the Geographer provides the Large Scale International Boundary (LSIB) dataset. The detailed version (2013) is derived from two other datasets: a LSIB line vector file and the World Vector Shorelines (WVS) from the National Geospatial-Intelligence Agency (NGA). The interior boundaries reflect U.S. government policies on boundaries, boundary disputes, and sovereignty. The exterior boundaries are derived from the WVS; however, the WVS coastline data is outdated and generally shifted from between several hundred meters to over a kilometer. Each feature is the polygonal area enclosed by interior boundaries and exterior coastlines where applicable, and many countries consist of multiple features, one per disjoint region. Compared with the detailed LSIB, in this simplified dataset some disjointed regions of each country have been reduced to a single feature. Furthermore, it excludes medium and smaller islands. The resulting simplified boundary lines are rarely shifted by more than 100 meters from the detailed LSIB lines. Each of the 312 features is a part of the geometry of one of the 284 countries described in this dataset.

countries that start with I. name, long name, population (source), population, constitutional form, drives on, head of state authority, Main continent, number of airports, Airports - with paved runways, Airports - with unpaved runways, Area, Birth rate, calling code, Children under the age of 5 years underweight, Current Account Balance, Death rate, Debt - external, Economic aid donor, Electricity consumption, Electricity consumption per capita, Electricity exports, Electricity imports, Electricity production, Exports, GDP - per capita (PPP), GDP (purchasing power parity), GDP real growth rate, Gross national income, Human Development Index, Health expenditures, Heliports, HIV AIDS adult prevalence rate, HIV AIDS deaths, HIV AIDS people living with HIV AIDS, Hospital bed density, capital city, Currency, Imports, Industrial production growth rate, Infant mortality rate, Inflation rate consumer prices, Internet hosts, internet tld, Internet users, Investment (gross fixed), iso 3166 code, ISO CODE, Labor force, Life expectancy at birth, Literacy, Manpower available for military service, Manpower fit for military service, Manpower reaching militarily age annually, is democracy, Market value of publicly traded shares, Maternal mortality rate, Merchant marine, Military expenditures percent of GDP, Natural gas consumption, Natural gas consumption per capita, Natural gas exports, Natural gas imports, Natural gas production, Natural gas proved reserves, Net migration rate, Obesity adult prevalence rate, Oil consumption, Oil consumption per capita, Oil exports, Oil imports, Oil production, Oil proved reserves, Physicians density, Population below poverty line, Population census, Population density, Population estimate, Population growth rate, Public debt, Railways, Reserves of foreign exchange and gold, Roadways, Stock of direct foreign investment abroad, Stock of direct foreign investment at home, Telephones main lines in use, Telephones main lines in use per capita, Telephones mobile cellular, Telephones mobile cellular per capita, Total fertility rate, Unemployment rate, Unemployment, youth ages 15-24, Waterways, valley, helicopter, canyon, artillery, crater, religion, continent, border, Plateau, marsh, Demonym

Natural Earth is a public domain map dataset available at 1:10, 1:50 and 1:110 million scales. Featuring tightly integrated vector and raster data, with Natural Earth you can make a variety of visually pleasing, well-crafted maps with cartography or GIS software.

Subscribers can find out export and import data of 23 countries by HS code or product’s name. This demo is helpful for market analysis.

Introduction

In 2015, the United Nations established 17 Sustainable Development Goals (SDGs), with Goal 7 focusing on ensuring access to affordable, reliable, and sustainable modern energy for all by 2030. By 2022, approximately 760 million people, or 1 in 11 globally still lacked electricity access according to Tracking SDG7 :The Energy Progress Report 2022, posing significant challenges to achieving this goal. Traditional survey methods for estimating the proportion of people with electricity access are often costly, infrequently updated, and hindered by the need for interpolation of historical data.

To address these challenges, this dataset employs a nighttime light remote sensing estimation framework that integrates DMSP-CCNL and NPP/VIIRS data with GlobPOP population data. This approach produces a global 0.1-degree grid and national-scale electricity access index (EAI) maps from 1992 to 2022.

The framework results' correlation coefficient (R) with World Bank survey data from 1992 to 2022 is 0.87, and the RMSE is 15.4, demonstrating its reliability at the national level. By effectively capturing geospatial changes, this dataset supports SDG 7.1.1 monitoring and offers valuable insights for policymakers to address electricity access disparities and promote sustainable energy transitions.

Data Description

1. This dataset consists of 0.1-degree grid Electricity Access Index (EAI) data in GeoTIFF format, where each pixel value represents the proportion of the population with access to electricity within that area.

Example Filename: EAI_0dot1_Deg_WGS84_F32_1992

Field 1: EAI (Proportion of people with access to electricity)

Field 2&3: Spatial resolution is 0.1 degree

Field 4: Coordinate system is WGS84

Field 5: Data type is F32 (Float32)

Field 6: Year "1992"

1. Aggregated EAI data at the national scale is provided in both Shapefile and CSV formats:

Table Filename: EAI_Level_0_1992_2022.csv

Fields include:

SOC (Country code)

Name (Country name)

National EAI data from 1992 to 2022

Shape Filename: EAI_Level_0_1992_2022.shp

Boundary data sourced from GADM (Database of Global Administrative Areas)

1. The pixel-level (30 arc-seconds) Electricity Accessed Population Density is provided in GeoTIFF format, as identified through nighttime light (NTL) data.

Example Filename: Elec_PopDen_WGS84_30arc_F32_1992

Field 1 & 2: Population Density with access to electricity (per km^2)

Field 3: Coordinate system is WGS84

Field 4: Spatial resolution is 30 arc-seconds

Field 5: Data type is F32 (Float32)

Field 6: Year "1992"

If you encounter any issues, please contact us via email at lulingliu@mail.bnu.edu.cn.

Subscribers can find out export and import data of 23 countries by HS code or product’s name. This demo is helpful for market analysis.