In 2022, India overtook China as the world's most populous country and now has almost 1.46 billion people. China now has the second-largest population in the world, still with just over 1.4 billion inhabitants, however, its population went into decline in 2023. Global population As of 2025, the world's population stands at almost 8.2 billion people and is expected to reach around 10.3 billion people in the 2080s, when it will then go into decline. Due to improved healthcare, sanitation, and general living conditions, the global population continues to increase; mortality rates (particularly among infants and children) are decreasing and the median age of the world population has steadily increased for decades. As for the average life expectancy in industrial and developing countries, the gap has narrowed significantly since the mid-20th century. Asia is the most populous continent on Earth; 11 of the 20 largest countries are located there. It leads the ranking of the global population by continent by far, reporting four times as many inhabitants as Africa. The Demographic Transition The population explosion over the past two centuries is part of a phenomenon known as the demographic transition. Simply put, this transition results from a drastic reduction in mortality, which then leads to a reduction in fertility, and increase in life expectancy; this interim period where death rates are low and birth rates are high is where this population explosion occurs, and population growth can remain high as the population ages. In today's most-developed countries, the transition generally began with industrialization in the 1800s, and growth has now stabilized as birth and mortality rates have re-balanced. Across less-developed countries, the stage of this transition varies; for example, China is at a later stage than India, which accounts for the change in which country is more populous - understanding the demographic transition can help understand the reason why China's population is now going into decline. The least-developed region is Sub-Saharan Africa, where fertility rates remain close to pre-industrial levels in some countries. As these countries transition, they will undergo significant rates of population growth
The Vatican City, often called the Holy See, has the smallest population worldwide, with only *** inhabitants. It is also the smallest country in the world by size. The islands Niue, Tuvalu, and Nauru followed in the next three positions. On the other hand, India is the most populous country in the world, with over *** billion inhabitants.
Globally, about 25 percent of the population is under 15 years of age and 10 percent is over 65 years of age. Africa has the youngest population worldwide. In Sub-Saharan Africa, more than 40 percent of the population is below 15 years, and only three percent are above 65, indicating the low life expectancy in several of the countries. In Europe, on the other hand, a higher share of the population is above 65 years than the population under 15 years. Fertility rates The high share of children and youth in Africa is connected to the high fertility rates on the continent. For instance, South Sudan and Niger have the highest population growth rates globally. However, about 50 percent of the world’s population live in countries with low fertility, where women have less than 2.1 children. Some countries in Europe, like Latvia and Lithuania, have experienced a population decline of one percent, and in the Cook Islands, it is even above two percent. In Europe, the majority of the population was previously working-aged adults with few dependents, but this trend is expected to reverse soon, and it is predicted that by 2050, the older population will outnumber the young in many developed countries. Growing global population As of 2025, there are 8.1 billion people living on the planet, and this is expected to reach more than nine billion before 2040. Moreover, the global population is expected to reach 10 billions around 2060, before slowing and then even falling slightly by 2100. As the population growth rates indicate, a significant share of the population increase will happen in Africa.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
The average for 2023 based on 196 countries was 0.51 percent. The highest value was in India: 17.91 percent and the lowest value was in Andorra: 0 percent. The indicator is available from 1960 to 2023. Below is a chart for all countries where data are available.
The statistic shows the 30 largest countries in the world by area. Russia is the largest country by far, with a total area of about 17 million square kilometers.
Population of Russia
Despite its large area, Russia - nowadays the largest country in the world - has a relatively small total population. However, its population is still rather large in numbers in comparison to those of other countries. In mid-2014, it was ranked ninth on a list of countries with the largest population, a ranking led by China with a population of over 1.37 billion people. In 2015, the estimated total population of Russia amounted to around 146 million people. The aforementioned low population density in Russia is a result of its vast landmass; in 2014, there were only around 8.78 inhabitants per square kilometer living in the country. Most of the Russian population lives in the nation’s capital and largest city, Moscow: In 2015, over 12 million people lived in the metropolis.
Goal 3Ensure healthy lives and promote well-being for all at all agesTarget 3.1: By 2030, reduce the global maternal mortality ratio to less than 70 per 100,000 live birthsIndicator 3.1.1: Maternal mortality ratioSH_STA_MORT: Maternal mortality ratioIndicator 3.1.2: Proportion of births attended by skilled health personnelSH_STA_BRTC: Proportion of births attended by skilled health personnel (%)Target 3.2: By 2030, end preventable deaths of newborns and children under 5 years of age, with all countries aiming to reduce neonatal mortality to at least as low as 12 per 1,000 live births and under-5 mortality to at least as low as 25 per 1,000 live birthsIndicator 3.2.1: Under-5 mortality rateSH_DYN_IMRTN: Infant deaths (number)SH_DYN_MORT: Under-five mortality rate, by sex (deaths per 1,000 live births)SH_DYN_IMRT: Infant mortality rate (deaths per 1,000 live births)SH_DYN_MORTN: Under-five deaths (number)Indicator 3.2.2: Neonatal mortality rateSH_DYN_NMRTN: Neonatal deaths (number)SH_DYN_NMRT: Neonatal mortality rate (deaths per 1,000 live births)Target 3.3: By 2030, end the epidemics of AIDS, tuberculosis, malaria and neglected tropical diseases and combat hepatitis, water-borne diseases and other communicable diseasesIndicator 3.3.1: Number of new HIV infections per 1,000 uninfected population, by sex, age and key populationsSH_HIV_INCD: Number of new HIV infections per 1,000 uninfected population, by sex and age (per 1,000 uninfected population)Indicator 3.3.2: Tuberculosis incidence per 100,000 populationSH_TBS_INCD: Tuberculosis incidence (per 100,000 population)Indicator 3.3.3: Malaria incidence per 1,000 populationSH_STA_MALR: Malaria incidence per 1,000 population at risk (per 1,000 population)Indicator 3.3.4: Hepatitis B incidence per 100,000 populationSH_HAP_HBSAG: Prevalence of hepatitis B surface antigen (HBsAg) (%)Indicator 3.3.5: Number of people requiring interventions against neglected tropical diseasesSH_TRP_INTVN: Number of people requiring interventions against neglected tropical diseases (number)Target 3.4: By 2030, reduce by one third premature mortality from non-communicable diseases through prevention and treatment and promote mental health and well-beingIndicator 3.4.1: Mortality rate attributed to cardiovascular disease, cancer, diabetes or chronic respiratory diseaseSH_DTH_NCOM: Mortality rate attributed to cardiovascular disease, cancer, diabetes or chronic respiratory disease (probability)SH_DTH_NCD: Number of deaths attributed to non-communicable diseases, by type of disease and sex (number)Indicator 3.4.2: Suicide mortality rateSH_STA_SCIDE: Suicide mortality rate, by sex (deaths per 100,000 population)SH_STA_SCIDEN: Number of deaths attributed to suicide, by sex (number)Target 3.5: Strengthen the prevention and treatment of substance abuse, including narcotic drug abuse and harmful use of alcoholIndicator 3.5.1: Coverage of treatment interventions (pharmacological, psychosocial and rehabilitation and aftercare services) for substance use disordersSH_SUD_ALCOL: Alcohol use disorders, 12-month prevalence (%)SH_SUD_TREAT: Coverage of treatment interventions (pharmacological, psychosocial and rehabilitation and aftercare services) for substance use disorders (%)Indicator 3.5.2: Alcohol per capita consumption (aged 15 years and older) within a calendar year in litres of pure alcoholSH_ALC_CONSPT: Alcohol consumption per capita (aged 15 years and older) within a calendar year (litres of pure alcohol)Target 3.6: By 2020, halve the number of global deaths and injuries from road traffic accidentsIndicator 3.6.1: Death rate due to road traffic injuriesSH_STA_TRAF: Death rate due to road traffic injuries, by sex (per 100,000 population)Target 3.7: By 2030, ensure universal access to sexual and reproductive health-care services, including for family planning, information and education, and the integration of reproductive health into national strategies and programmesIndicator 3.7.1: Proportion of women of reproductive age (aged 15–49 years) who have their need for family planning satisfied with modern methodsSH_FPL_MTMM: Proportion of women of reproductive age (aged 15-49 years) who have their need for family planning satisfied with modern methods (% of women aged 15-49 years)Indicator 3.7.2: Adolescent birth rate (aged 10–14 years; aged 15–19 years) per 1,000 women in that age groupSP_DYN_ADKL: Adolescent birth rate (per 1,000 women aged 15-19 years)Target 3.8: Achieve universal health coverage, including financial risk protection, access to quality essential health-care services and access to safe, effective, quality and affordable essential medicines and vaccines for allIndicator 3.8.1: Coverage of essential health servicesSH_ACS_UNHC: Universal health coverage (UHC) service coverage indexIndicator 3.8.2: Proportion of population with large household expenditures on health as a share of total household expenditure or incomeSH_XPD_EARN25: Proportion of population with large household expenditures on health (greater than 25%) as a share of total household expenditure or income (%)SH_XPD_EARN10: Proportion of population with large household expenditures on health (greater than 10%) as a share of total household expenditure or income (%)Target 3.9: By 2030, substantially reduce the number of deaths and illnesses from hazardous chemicals and air, water and soil pollution and contaminationIndicator 3.9.1: Mortality rate attributed to household and ambient air pollutionSH_HAP_ASMORT: Age-standardized mortality rate attributed to household air pollution (deaths per 100,000 population)SH_STA_AIRP: Crude death rate attributed to household and ambient air pollution (deaths per 100,000 population)SH_STA_ASAIRP: Age-standardized mortality rate attributed to household and ambient air pollution (deaths per 100,000 population)SH_AAP_MORT: Crude death rate attributed to ambient air pollution (deaths per 100,000 population)SH_AAP_ASMORT: Age-standardized mortality rate attributed to ambient air pollution (deaths per 100,000 population)SH_HAP_MORT: Crude death rate attributed to household air pollution (deaths per 100,000 population)Indicator 3.9.2: Mortality rate attributed to unsafe water, unsafe sanitation and lack of hygiene (exposure to unsafe Water, Sanitation and Hygiene for All (WASH) services)SH_STA_WASH: Mortality rate attributed to unsafe water, unsafe sanitation and lack of hygiene (deaths per 100,000 population)Indicator 3.9.3: Mortality rate attributed to unintentional poisoningSH_STA_POISN: Mortality rate attributed to unintentional poisonings, by sex (deaths per 100,000 population)Target 3.a: Strengthen the implementation of the World Health Organization Framework Convention on Tobacco Control in all countries, as appropriateIndicator 3.a.1: Age-standardized prevalence of current tobacco use among persons aged 15 years and olderSH_PRV_SMOK: Age-standardized prevalence of current tobacco use among persons aged 15 years and older, by sex (%)Target 3.b: Support the research and development of vaccines and medicines for the communicable and non-communicable diseases that primarily affect developing countries, provide access to affordable essential medicines and vaccines, in accordance with the Doha Declaration on the TRIPS Agreement and Public Health, which affirms the right of developing countries to use to the full the provisions in the Agreement on Trade-Related Aspects of Intellectual Property Rights regarding flexibilities to protect public health, and, in particular, provide access to medicines for allIndicator 3.b.1: Proportion of the target population covered by all vaccines included in their national programmeSH_ACS_DTP3: Proportion of the target population with access to 3 doses of diphtheria-tetanus-pertussis (DTP3) (%)SH_ACS_MCV2: Proportion of the target population with access to measles-containing-vaccine second-dose (MCV2) (%)SH_ACS_PCV3: Proportion of the target population with access to pneumococcal conjugate 3rd dose (PCV3) (%)SH_ACS_HPV: Proportion of the target population with access to affordable medicines and vaccines on a sustainable basis, human papillomavirus (HPV) (%)Indicator 3.b.2: Total net official development assistance to medical research and basic health sectorsDC_TOF_HLTHNT: Total official development assistance to medical research and basic heath sectors, net disbursement, by recipient countries (millions of constant 2018 United States dollars)DC_TOF_HLTHL: Total official development assistance to medical research and basic heath sectors, gross disbursement, by recipient countries (millions of constant 2018 United States dollars)Indicator 3.b.3: Proportion of health facilities that have a core set of relevant essential medicines available and affordable on a sustainable basisSH_HLF_EMED: Proportion of health facilities that have a core set of relevant essential medicines available and affordable on a sustainable basis (%)Target 3.c: Substantially increase health financing and the recruitment, development, training and retention of the health workforce in developing countries, especially in least developed countries and small island developing StatesIndicator 3.c.1: Health worker density and distributionSH_MED_DEN: Health worker density, by type of occupation (per 10,000 population)SH_MED_HWRKDIS: Health worker distribution, by sex and type of occupation (%)Target 3.d: Strengthen the capacity of all countries, in particular developing countries, for early warning, risk reduction and management of national and global health risksIndicator 3.d.1: International Health Regulations (IHR) capacity and health emergency preparednessSH_IHR_CAPS: International Health Regulations (IHR) capacity, by type of IHR capacity (%)Indicator 3.d.2: Percentage of bloodstream infections due to selected antimicrobial-resistant organismsiSH_BLD_MRSA: Percentage of bloodstream infection due to methicillin-resistant Staphylococcus aureus (MRSA) among patients seeking care and whose
The DACH region refers to the Central European area of Germany (D), Austria (A), and Switzerland (CH). In 2024, these countries had a combined population of ****** million people. Germany is, by far, the largest of the three countries, with a population of more than ***** million; almost ten times larger than those of Austria or Switzerland. Growth rates However, population growth across the region has been relatively slow during the past two decades, with Germany's population growing by fewer than two million since 2000, which is an increase of just two percent. In contrast, Austria's population has grown by roughly 12 percent, while Switzerland's has increased by over 20 percent, but the overall change in the DACH region's population is less than five percent due to the disproportionate amount of people in Germany. Migration The reason for low population growth is due to the historically low birth rates in Germany. Since 1972, Germany's death rate has consistently exceeded its birth rate, giving an overall natural decline. Austria and Switzerland have also experienced similar trends in some years, but generally see a natural increase. Because of this, population growth is often dependent on migration. The most significant rise in the DACH area's population came in around 2015, during the Syrian migrant crisis. In Europe, Germany took in the largest number of Syrian refugees during this period, while Austria had one of the highest acceptance rates in proportion to its population. This is in addition to the relatively high number of refugees Germany and Austria accept from other countries, especially Afghanistan. Not all migrants are refugees, however, as the high living standards in all three countries attract large numbers of economic migrants from the rest of the world, especially Southern and Eastern Europe.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
All cities with a population > 1000 or seats of adm div (ca 80.000)Sources and ContributionsSources : GeoNames is aggregating over hundred different data sources. Ambassadors : GeoNames Ambassadors help in many countries. Wiki : A wiki allows to view the data and quickly fix error and add missing places. Donations and Sponsoring : Costs for running GeoNames are covered by donations and sponsoring.Enrichment:add country name
As of 2023, Guatemala was the most populated country in Central America with over 17.5 million inhabitants. Honduras followed in second with over 10 million. In contrast, Belize was the least populated with less than half a million inhabitants.
In 2023, Washington, D.C. had the highest population density in the United States, with 11,130.69 people per square mile. As a whole, there were about 94.83 residents per square mile in the U.S., and Alaska was the state with the lowest population density, with 1.29 residents per square mile. The problem of population density Simply put, population density is the population of a country divided by the area of the country. While this can be an interesting measure of how many people live in a country and how large the country is, it does not account for the degree of urbanization, or the share of people who live in urban centers. For example, Russia is the largest country in the world and has a comparatively low population, so its population density is very low. However, much of the country is uninhabited, so cities in Russia are much more densely populated than the rest of the country. Urbanization in the United States While the United States is not very densely populated compared to other countries, its population density has increased significantly over the past few decades. The degree of urbanization has also increased, and well over half of the population lives in urban centers.
Open Government Licence 3.0http://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/
License information was derived automatically
National and subnational mid-year population estimates for the UK and its constituent countries by administrative area, age and sex (including components of population change, median age and population density).
This statistic shows the total population of Ecuador from 2020 to 2022, with projections up until 2030. In 2022, the total population of Ecuador amounted to approximately 17.72 million inhabitants. Ecuador's population The population of Ecuador continues to increase slowly but steadily. In 2014, the total population of Ecuador amounted to around 16 million. Yet, the population growth rate has been decreasing slightly since 2008. This means that more people have died than were born and/or more people have migrated out of as opposed to into the country. The fertility rate has been decreasing as well; ten years ago the fertility rate stood at around 3 children per woman, but today it stands at around 2.5 children per woman. This decrease has likely caused the slump in the population growth rate, even though it still remains above the natural replacement rate of 2, causing the population to still grow overall. Further, Ecuador’s life expectancy is around 76 years nowadays, with the percentage of adults aged over 65 years being less than seven percent (451305). The population of Ecuador is quite young, with about a third of the population under 14 years of age. The population is spread all over the country: Guayaquil and Quito are the largest cities in Ecuador and home to close to 4 million people combined. All other cities are smaller and the majority of them inhabit less than 250,000 people.
In 2024, Russia had the largest population among European countries at ***** million people. The next largest countries in terms of their population size were Turkey at **** million, Germany at **** million, the United Kingdom at **** million, and France at **** million. Europe is also home to some of the world’s smallest countries, such as the microstates of Liechtenstein and San Marino, with populations of ****** and ****** respectively. Europe’s largest economies Germany was Europe’s largest economy in 2023, with a Gross Domestic Product of around *** trillion Euros, while the UK and France are the second and third largest economies, at *** trillion and *** trillion euros respectively. Prior to the mid-2000s, Europe’s fourth-largest economy, Italy, had an economy that was of a similar sized to France and the UK, before diverging growth patterns saw the UK and France become far larger economies than Italy. Moscow and Istanbul the megacities of Europe Two cities on the eastern borders of Europe were Europe’s largest in 2023. The Turkish city of Istanbul, with a population of 15.8 million, and the Russian capital, Moscow, with a population of 12.7 million. Istanbul is arguably the world’s most famous transcontinental city with territory in both Europe and Asia and has been an important center for commerce and culture for over 2,000 years. Paris was the third largest European city with a population of ** million, with London being the fourth largest at *** million.
The Employment and Unemployment surveys of National sample Survey (NSS) are primary sources of data on various indicators of labour force at National and State levels. These are used for planning, policy formulation, decision support and as input for further statistical exercises by various Government organizations, academicians, researchers and scholars. NSS surveys on employment and un-employment with large sample size of households have been conducted quinquennially from 27th. round(October'1972 - September'1973) onwards. Cotinuing in this series the fourth such all-india survey on the situation of employment and unemployment in India was carried out during the period july 1987 - june 1988 .
The working Group set up for planning of the entire scheme of the survey, among other things, examined also in detail some of the key results generated from the 38th round data and recommended some stream-lining of the 38th round schedule for the use in the 43rd round. Further, it felt no need for changing the engaging the easting conceptual frame work. However, some additional items were recommended to be included in the schedule to obtain the necessary and relevant information for generating results to see the effects on participation rates in view of the ILO suggestions.5.0.1. The NSSO Governing Council approved the recommendations of the working Group and also the schedule of enquiry in its 44th meeting held on 16 January, 1987. In this survey, a nation-wide enquiry was conducted to provide estimates on various characteristics pertaining to employment and unemployment in India and some characteristics associated with them at the national and state levels. Information on various facets of employment and unemployment in India was collected through a schedule of enquiry (schedule 10).
The survey covered the whole of Indian Union excepting i) Ladakh and Kargil districts of Jammu & Kashmir ii) Rural areas of Nagaland
Randomly selected households based on sampling procedure and members of the household
Sample survey data [ssd]
It may be mentioned here that in order to net more households of the upper income bracket in the Sample , significant changes have been made in the sample design in this round (compares to the design of the 38th round).
SAMPLE DESIGN AND SAMPLE SIZE The survey had a two-stage stratified design. The first stage units (f.s.u.'s) are villages in the rural sector and urban blocks in the urban sector. The second stage units are households in both the sectors. Sampling frame for f.s.u.'s : The lists of 1981 census villages constituted the sampling frame for rural sector in most districts. But the 1981 census frame could not be used for a few districts because, either the 1981 census was not held there or the list of 1981 census villages could not be obtained or the lists obtained from the census authorities were found to be grossly incomplete. In such cases 1971 census frame were used. In the urban sector , the Urban Frame Survey (U.F.S.) blocks constituted the sampling frame. STRATIFICATION : States were first divided into agro-economic regions which are groups of contiguous districts , similar with respect to population density and crop pattern. In Gujarat, however , some districts have been split for the purpose of region formation In consideration of the location of dry areas and the distribution of the tribal population in the state. The composition of the regions is given in the Appendix. RURAL SECTOR: In the rural sector, within each region, each district with 1981Census rural population less 1.8 million formed a single stratum. Districts with larger population were divided into two or more strata, depending on population, by grouping contiguous tehsils similar, as for as possible, in respect of rural population Density and crop pattern. (In Gujarat, however , in the case of districts extending over more than one region, even if the rural population was less than 1.8 million, the portion of a district falling in each region constituted a separate stratum. Further ,in Assam the old "basic strata" formed on the basis of 1971 census rural population exactly in the above manner, but with cut-off population as 1.5 million have been retained as the strata for rural sampling.) URBAN SECTOR : In the urban sector , strata were formed , again within NSS region , on the basis of the population size class of towns . Each city with population 10 lakhs or more is self-representative , as in the earlier rounds . For the purpose of stratification, in towns with '81 census population 4 lakhs or more , the blocks have been divided into two categories , viz . : One consisting of blocks in areas inhabited by the relatively affluent section of the population and the other consisting of the remaining blocks. The strata within each region were constituted as follows :
Stratum population class of town
1 all towns with population less than 50,000 2 -do- 50,000 - 199,999 3 -do- 200,000 - 399,999 4 -do- 400,000 - 999,999 ( affluent area) 5 (other area) 6 a single city with population 1 million and above (affluent area) 7 " (other area) 8 another city with population 1 million and above
Note : There is no region with more than one city with population 1 million and above. The stratum number have been retained as above even if in some regions some of the strata are empty.
Allocation for first stage units : The total all-India sample size was allocated to the states /U.T.'s proportionate to the strength of central field staff. This was allocated to the rural and urban sectors considering the relative size of the rural and urban population. Now the rural samples were allocated to the rural strata in proportion to rural population. The urban samples were allocated to the urban strata in proportion to urban population with double weight age given to those strata of towns with population 4 lakhs or more which lie in area inhabited by the relatively affluent section. All allocations have been adjusted such that the sample size for stratum was at least a multiple of 4 (preferably multiple of 8) and the total sample size of a region is a multiple of 8 for the rural and urban sectors separately.
Selection of f.s.u.'s : The sample villages have been selected circular systematically with probability proportional to population in the form of two independent interpenetrating sub-samples (IPNS) . The sample blocks have been selected circular systematically with equal probability , also in the form of two IPNS' s.
As regards the rural areas of Arunachal Pradesh, the procedure of 'cluster sampling' was:- The field staff will be supplied with a list of the nucleus villages of each cluster and they selected the remaining villages of the cluster according to the procedure described in Section Two. The nucleus villages were selected circular systematically with equal probability, in the form of two IPNS 's.
Hamlet-group and sub-blocks : Large villages and blocks were sub- divided into a suitable number of hamlet-groups and sub-blocks respectively having equal population convent and one them was selected at random for surveys.
Hamlet-group and sub-blocks : Large villages and blocks were sub- divided into a suitable number of hamlet-groups and sub-blocks respectively having equal population convent and one them was selected at random for surveys.
Selection of households : rural : In order to have adequate number of sample households from the affluent section of the society, some new procedures were introduced for selection of sample households, both in the rural and urban sectors. In the rural sector , while listing households, the investigator identified the households in village/ selected hamlet- group which may be considered to be relatively more affluent than the rest. This was done largely on the basis of his own judgment but while exercising his judgment considered factors generally associated with rich people in the localitysuch as : living in large pucca house in well-maintained state, ownership/possession of cultivated/irrigated land in excess of certain norms. ( e.g.20 acres of cultivated land or 10 acres of irrigated land), ownership of motor vehicles and costly consumer durables like T.V. , VCR, VCP AND refrigerator, ownership of large business establishment , etc. Now these "rich" households will form sub-stratum 1. (If the total number of households listed is 80 or more , 10 relatively most affluent households will form sub-stratum 1. If it is below 80, 8 such households will form sub-stratum 1. The remaining households will 'constitute sub-stratum 2. At the time of listing, information relating to each household' s major sources of income will be collected, on the basis of which its means of livelihood will be identified as one of the following : "self-employed in non-agriculture " "rural labour" and "others" (see section Two for definition of these terms) . Also the area of land possessed as on date of survey will be ascertained from all households while listing. Now the households of sub-stratum 2 will be arranged in the order : (1)self-employed in non-agriculture, (2) rural labour, other households, with land possessed (acres) : (3) less than 1.00 (4) 1.00-2.49,(5)2.50-4.99, (6)
Estimated number of persons by quarter of a year and by year, Canada, provinces and territories.
The National Sample Survey Organisation (NSSO) has been set up by the Government of India in 1950 to collect socio-economic data employing scientific sampling methods. The NSSO conducts regular consumer expenditure surveys as part of its "rounds", each round being normally of a year's duration and covering more than one subject of study. The surveys are conducted through household interviews, using a random sample of households covering practically the entire geographical area of the country. Surveys on consumer expenditure are being conducted quinquennially on a large sample of households from the 27th round (October 1972 - September 1973) onwards. The fourth quinquennial survey on household consumer expenditure was carried out during July 1987 - June 1988. The three previous surveys of this series were carries out in the 27th (October-September 1973) , the 32nd (July 1977 to June 1978) and the 38th (January to December , 1983) rounds of the NSSO. The present survey like the previous one, covered the entire population. Expenditure incurred by the sample household for the purpose of domestic consumption were collected for the 30 days preceding the date of survey. No account has, however, been taken of any expenditure incurred towards the productive enterprises of the household. It may be mentioned here that in order to get more households of the upper income bracket in the Sample , significant changes have been made in the sample design in this round (compared to the design of the 38th round). The survey covered the whole of Indian Union excepting: i) Ladakh and Kargil districts of Jammu & Kashmir ii) Rural areas of Nagaland
The field work for the survey was conducted, as usual, by the Field Operations Division of the Organisation. The collected data were processed by the Data Processing Division of NSSO and tabulated by the Computer Centre of Department of Statistics. The reports have been prepared by Survey Design & Research Division (SDRD) of NSSO under the guidance of the Governing Council, NSSO.
The survey covered the whole of Indian Union excepting: i) Ladakh and Kargil districts of Jammu & Kashmir ii) Rural areas of Nagaland
Randomly selected households based on sampling procedure and members of the household
The survey used the interview method of data collection from a sample of randomly selected households and members of the household.
Sample survey data [ssd]
The survey will have a two-stage stratified design. The first stage units (f.s.u.s) or villages in the rural sector and urban blocks in the urban sector. The second stage units are households in both the sectors.
Sampling frame for f.s.u.'s: The lists of 1981 census villages constitute the sampling frame for rural sector in most districts. But the 1981 census frame could not be used for a few districts because, either the 1981 census was not held there or the list of 1981 census villages could not be obtained or the lists obtained from the census authorities were found to be grossly incomplete. In such cases 1971 census frame have been used. In the urban sector , the Urban Frame Survey (U.F.S.) blocks constitute the sampling frame.
Stratification: States are first divided into agro-economic regions which are groups of contiguous districts, similar with respect to population density and crop pattern. In Gujarat, however, some districts have been split for the purpose of region formation In consideration of the location of dry areas and the distribution of the tribal population in the state.
RURAL SECTOR: In the rural sector, within each region, each district with 1981 Census rural population less 1.8 million forms a single stratum. Districts with larger population were divided into two or more strata, depending on population, by grouping contiguous tehsils similar, as for as possible, in respect of rural population Density and crop pattern. (In Gujarat, however, in the case of districts extending over more than one region, even if the rural population was less than 1.8 million, the portion of a district falling in each region constituted a separate stratum. Further, in Assam the old "basic strata" formed on the basis of 1971 census rural population exactly in the above manner, but with cut-off population as 1.5 million have been retained as the strata for rural sampling).
URBAN SECTOR: In the urban sector, strata are formed, again within NSS region, on the basis of the population size class of towns. Each city with population 10 lakhs or more is self-representative, as in the earlier rounds. For the purpose of stratification, in towns with 1981 census population 4 lakhs or more , the blocks have been divided into two categories, viz. - One consisting of blocks in areas inhabited by the relatively affluent section of the population and the other consisting of the remaining blocks.
Allocation for first stage units: The total all-India sample size has been allocated to the states /U.T.'s proportionate to the strength of central field staff. This was allocated to the rural and urban sectors considering the relative size of the rural and urban population. Now the rural samples were allocated to the rural strata in proportion to rural population. The urban samples were allocated to the urban strata in proportion to urban population with double weight age given to those strata of towns with population 4 lakhs or more which lie in area inhabited by the relatively affluent section.
Selection of f.s.u.'s: The sample villages have been selected circular systematically with probability proportional to population in the form of two independent interpenetrating sub-samples (IPNS). The sample blocks have been selected circular systematically with equal probability, also in the form of two IPNS's.
Sample size (central sample): The all India sample in respect of the central sample consists of 8518 villages and 4648 blocks.
Sample size (state sample): All the states and Union Territories except Andaman & Nicobar Islands, Chandigarh, Dadra & Nagar Haveli and Lakshadweep are participating in this round at least on an equal matching basis.
There was no deviation from the original sampling design.
Face-to-face [f2f]
The NSSO surveys on consumer expenditure aim to measure the household consumer expenditure in quantitative terms disaggregated by various household characteristics.
The data for this survey is collected in the NSS Schedule 1.0 used for household consumer expenditure. For this round, the schedule had 11 blocks.
Blocks 1 and 2 - are similar to the ones used in usual NSS rounds. These are used to record identification of sample households and particulars of field operations.
Block-3: Household characteristics like, household size, principal industry-occupation, social group, land possessed and cultivated, type of dwelling etc. are recorded in this block.
Block-4: In this block the detailed demographic particulars including age, sex, educational level, marital status, number of meals usually taken in a day etc. are recorded.
Block-5: In this block cash purchase and consumption of food, pan, tobacco, intoxicants and fuel & light during the last 30 days are recorded.
Block-6: Consumption of clothing during the last 30 and 365 days is recorded in this block.
Block-7: Consumption of footwear during the last 30 and 365 days is recorded in this block.
Block-8 : Expenditure on miscellaneous goods and services and rents and taxes during the last 30 days has been recorded in this block.
Block-9 : Expenditure for purchase and construction (including repairs) of durable goods for domestic use is recorded here.
Block-10 : Particulars of dwelling units are recorded in this block.
Block-11 : Summary of consumer expenditure during last 30 days is recorded in this block.
Gallup Worldwide Research continually surveys residents in more than 150 countries, representing more than 98% of the world's adult population, using randomly selected, nationally representative samples. Gallup typically surveys 1,000 individuals in each country, using a standard set of core questions that has been translated into the major languages of the respective country. In some regions, supplemental questions are asked in addition to core questions. Face-to-face interviews are approximately 1 hour, while telephone interviews are about 30 minutes. In many countries, the survey is conducted once per year, and fieldwork is generally completed in two to four weeks. The Country Dataset Details spreadsheet displays each country's sample size, month/year of the data collection, mode of interviewing, languages employed, design effect, margin of error, and details about sample coverage.
Gallup is entirely responsible for the management, design, and control of Gallup Worldwide Research. For the past 70 years, Gallup has been committed to the principle that accurately collecting and disseminating the opinions and aspirations of people around the globe is vital to understanding our world. Gallup's mission is to provide information in an objective, reliable, and scientifically grounded manner. Gallup is not associated with any political orientation, party, or advocacy group and does not accept partisan entities as clients. Any individual, institution, or governmental agency may access the Gallup Worldwide Research regardless of nationality. The identities of clients and all surveyed respondents will remain confidential.
Sample survey data [ssd]
SAMPLING AND DATA COLLECTION METHODOLOGY With some exceptions, all samples are probability based and nationally representative of the resident population aged 15 and older. The coverage area is the entire country including rural areas, and the sampling frame represents the entire civilian, non-institutionalized, aged 15 and older population of the entire country. Exceptions include areas where the safety of interviewing staff is threatened, scarcely populated islands in some countries, and areas that interviewers can reach only by foot, animal, or small boat.
Telephone surveys are used in countries where telephone coverage represents at least 80% of the population or is the customary survey methodology (see the Country Dataset Details for detailed information for each country). In Central and Eastern Europe, as well as in the developing world, including much of Latin America, the former Soviet Union countries, nearly all of Asia, the Middle East, and Africa, an area frame design is used for face-to-face interviewing.
The typical Gallup Worldwide Research survey includes at least 1,000 surveys of individuals. In some countries, oversamples are collected in major cities or areas of special interest. Additionally, in some large countries, such as China and Russia, sample sizes of at least 2,000 are collected. Although rare, in some instances the sample size is between 500 and 1,000. See the Country Dataset Details for detailed information for each country.
FACE-TO-FACE SURVEY DESIGN
FIRST STAGE In countries where face-to-face surveys are conducted, the first stage of sampling is the identification of 100 to 135 ultimate clusters (Sampling Units), consisting of clusters of households. Sampling units are stratified by population size and or geography and clustering is achieved through one or more stages of sampling. Where population information is available, sample selection is based on probabilities proportional to population size, otherwise simple random sampling is used. Samples are drawn independent of any samples drawn for surveys conducted in previous years.
There are two methods for sample stratification:
METHOD 1: The sample is stratified into 100 to 125 ultimate clusters drawn proportional to the national population, using the following strata: 1) Areas with population of at least 1 million 2) Areas 500,000-999,999 3) Areas 100,000-499,999 4) Areas 50,000-99,999 5) Areas 10,000-49,999 6) Areas with less than 10,000
The strata could include additional stratum to reflect populations that exceed 1 million as well as areas with populations less than 10,000. Worldwide Research Methodology and Codebook Copyright © 2008-2012 Gallup, Inc. All rights reserved. 8
METHOD 2:
A multi-stage design is used. The country is first stratified by large geographic units, and then by smaller units within geography. A minimum of 33 Primary Sampling Units (PSUs), which are first stage sampling units, are selected. The sample design results in 100 to 125 ultimate clusters.
SECOND STAGE
Random route procedures are used to select sampled households. Unless an outright refusal occurs, interviewers make up to three attempts to survey the sampled household. To increase the probability of contact and completion, attempts are made at different times of the day, and where possible, on different days. If an interviewer cannot obtain an interview at the initial sampled household, he or she uses a simple substitution method. Refer to Appendix C for a more in-depth description of random route procedures.
THIRD STAGE
Respondents are randomly selected within the selected households. Interviewers list all eligible household members and their ages or birthdays. The respondent is selected by means of the Kish grid (refer to Appendix C) in countries where face-to-face interviewing is used. The interview does not inform the person who answers the door of the selection criteria until after the respondent has been identified. In a few Middle East and Asian countries where cultural restrictions dictate gender matching, respondents are randomly selected using the Kish grid from among all eligible adults of the matching gender.
TELEPHONE SURVEY DESIGN
In countries where telephone interviewing is employed, random-digit-dial (RDD) or a nationally representative list of phone numbers is used. In select countries where cell phone penetration is high, a dual sampling frame is used. Random respondent selection is achieved by using either the latest birthday or Kish grid method. At least three attempts are made to reach a person in each household, spread over different days and times of day. Appointments for callbacks that fall within the survey data collection period are made.
PANEL SURVEY DESIGN
Prior to 2009, United States data were collected using The Gallup Panel. The Gallup Panel is a probability-based, nationally representative panel, for which all members are recruited via random-digit-dial methodology and is only used in the United States. Participants who elect to join the panel are committing to the completion of two to three surveys per month, with the typical survey lasting 10 to 15 minutes. The Gallup Worldwide Research panel survey is conducted over the telephone and takes approximately 30 minutes. No incentives are given to panel participants. Worldwide Research Methodology and Codebook Copyright © 2008-2012 Gallup, Inc. All rights reserved. 9
QUESTION DESIGN
Many of the Worldwide Research questions are items that Gallup has used for years. When developing additional questions, Gallup employed its worldwide network of research and political scientists1 to better understand key issues with regard to question development and construction and data gathering. Hundreds of items were developed, tested, piloted, and finalized. The best questions were retained for the core questionnaire and organized into indexes. Most items have a simple dichotomous ("yes or no") response set to minimize contamination of data because of cultural differences in response styles and to facilitate cross-cultural comparisons.
The Gallup Worldwide Research measures key indicators such as Law and Order, Food and Shelter, Job Creation, Migration, Financial Wellbeing, Personal Health, Civic Engagement, and Evaluative Wellbeing and demonstrates their correlations with world development indicators such as GDP and Brain Gain. These indicators assist leaders in understanding the broad context of national interests and establishing organization-specific correlations between leading indexes and lagging economic outcomes.
Gallup organizes its core group of indicators into the Gallup World Path. The Path is an organizational conceptualization of the seven indexes and is not to be construed as a causal model. The individual indexes have many properties of a strong theoretical framework. A more in-depth description of the questions and Gallup indexes is included in the indexes section of this document. In addition to World Path indexes, Gallup Worldwide Research questions also measure opinions about national institutions, corruption, youth development, community basics, diversity, optimism, communications, religiosity, and numerous other topics. For many regions of the world, additional questions that are specific to that region or country are included in surveys. Region-specific questions have been developed for predominantly Muslim nations, former Soviet Union countries, the Balkans, sub-Saharan Africa, Latin America, China and India, South Asia, and Israel and the Palestinian Territories.
The questionnaire is translated into the major conversational languages of each country. The translation process starts with an English, French, or Spanish version, depending on the region. One of two translation methods may be used.
METHOD 1: Two independent translations are completed. An independent third party, with some knowledge of survey research methods, adjudicates the differences. A professional translator translates the final version back into the source language.
METHOD 2: A translator
Nigeria has the largest population in Africa. As of 2025, the country counted over 237.5 million individuals, whereas Ethiopia, which ranked second, has around 135.5 million inhabitants. Egypt registered the largest population in North Africa, reaching nearly 118.4 million people. In terms of inhabitants per square kilometer, Nigeria only ranked seventh, while Mauritius had the highest population density on the whole African continent in 2023. The fastest-growing world region Africa is the second most populous continent in the world, after Asia. Nevertheless, Africa records the highest growth rate worldwide, with figures rising by over two percent every year. In some countries, such as Niger, the Democratic Republic of Congo, and Chad, the population increase peaks at over three percent. With so many births, Africa is also the youngest continent in the world. However, this coincides with a low life expectancy. African cities on the rise The last decades have seen high urbanization rates in Asia, mainly in China and India. However, African cities are currently growing at larger rates. Indeed, most of the fastest-growing cities in the world are located in Sub-Saharan Africa. Gwagwalada, in Nigeria, and Kabinda, in the Democratic Republic of the Congo, ranked first worldwide. By 2035, instead, Africa's fastest-growing cities are forecast to be Bujumbura, in Burundi, and Zinder, Nigeria.
From now until 2100, India and China will remain the most populous countries in the world, however China's population decline has already started, and it is on course to fall by around 50 percent in the 2090s; while India's population decline is projected to begin in the 2060s. Of the 10 most populous countries in the world in 2100, five will be located in Asia, four in Africa, as well as the United States. Rapid growth in Africa Rapid population growth across Africa will see the continent's population grow from around 1.5 billion people in 2024 to 3.8 billion in 2100. Additionally, unlike China or India, population growth in many of these countries is not expected to go into decline, and instead is expected to continue well into the 2100s. Previous estimates had projected these countries' populations would be much higher by 2100 (the 2019 report estimated Nigeria's population would exceed 650 million), yet the increased threat of the climate crisis and persistent instability is delaying demographic development and extending population growth. The U.S. as an outlier Compared to the nine other largest populations in 2100, the United States stands out as it is more demographically advanced, politically stable, and economically stronger. However, while most other so-called "advanced countries" are projected to see their population decline drastically in the coming decades, the U.S. population is projected to continue growing into the 2100s. This will largely be driven by high rates of immigration into the U.S., which will drive growth despite fertility rates being around 1.6 births per woman (below the replacement level of 2.1 births per woman), and the slowing rate of life expectancy. Current projections estimate the U.S. will have a net migration rate over 1.2 million people per year for the remainder of the century.
https://www.northcarolina-demographics.com/terms_and_conditionshttps://www.northcarolina-demographics.com/terms_and_conditions
A dataset listing North Carolina counties by population for 2024.
In 2022, India overtook China as the world's most populous country and now has almost 1.46 billion people. China now has the second-largest population in the world, still with just over 1.4 billion inhabitants, however, its population went into decline in 2023. Global population As of 2025, the world's population stands at almost 8.2 billion people and is expected to reach around 10.3 billion people in the 2080s, when it will then go into decline. Due to improved healthcare, sanitation, and general living conditions, the global population continues to increase; mortality rates (particularly among infants and children) are decreasing and the median age of the world population has steadily increased for decades. As for the average life expectancy in industrial and developing countries, the gap has narrowed significantly since the mid-20th century. Asia is the most populous continent on Earth; 11 of the 20 largest countries are located there. It leads the ranking of the global population by continent by far, reporting four times as many inhabitants as Africa. The Demographic Transition The population explosion over the past two centuries is part of a phenomenon known as the demographic transition. Simply put, this transition results from a drastic reduction in mortality, which then leads to a reduction in fertility, and increase in life expectancy; this interim period where death rates are low and birth rates are high is where this population explosion occurs, and population growth can remain high as the population ages. In today's most-developed countries, the transition generally began with industrialization in the 1800s, and growth has now stabilized as birth and mortality rates have re-balanced. Across less-developed countries, the stage of this transition varies; for example, China is at a later stage than India, which accounts for the change in which country is more populous - understanding the demographic transition can help understand the reason why China's population is now going into decline. The least-developed region is Sub-Saharan Africa, where fertility rates remain close to pre-industrial levels in some countries. As these countries transition, they will undergo significant rates of population growth