In 2023, the metropolitan area of New York-Newark-Jersey City had the biggest population in the United States. Based on annual estimates from the census, the metropolitan area had around 19.5 million inhabitants, which was a slight decrease from the previous year. The Los Angeles and Chicago metro areas rounded out the top three. What is a metropolitan statistical area? In general, a metropolitan statistical area (MSA) is a core urbanized area with a population of at least 50,000 inhabitants – the smallest MSA is Carson City, with an estimated population of nearly 56,000. The urban area is made bigger by adjacent communities that are socially and economically linked to the center. MSAs are particularly helpful in tracking demographic change over time in large communities and allow officials to see where the largest pockets of inhabitants are in the country. How many MSAs are in the United States? There were 421 metropolitan statistical areas across the U.S. as of July 2021. The largest city in each MSA is designated the principal city and will be the first name in the title. An additional two cities can be added to the title, and these will be listed in population order based on the most recent census. So, in the example of New York-Newark-Jersey City, New York has the highest population, while Jersey City has the lowest. The U.S. Census Bureau conducts an official population count every ten years, and the new count is expected to be announced by the end of 2030.

This statistic provides projected figures for the Gross Metropolitan Product (GMP) of the United States in 2021, by metropolitan area. Only the 100 leading metropolitan areas are shown here. In 2022, the GMP of the New York-Newark-Jersey City metro area is projected to be around of about 2.16 trillion U.S. dollars.

Los Angeles metropolitan area

A metropolitan area in the U.S. is characterized by a relatively high population density and close economic ties through the area, albeit, without the legal incorporation that is found within cities. The Gross Metropolitan Product is measured by the Bureau of Economic Analysis under the U.S. Department of Commerce and includes only metropolitan areas. The GMP of the Los Angeles-Long Beach-Anaheim metropolitan area located in California is projected to be among the highest in the United States in 2021, amounting to 1.1 trillion U.S. dollars. The Houston-The Woodlands-Sugar Land, Texas metro area is estimated to be approximately 543 billion U.S. dollars in the same year.

The Los Angeles metro area had one of the largest populations in the country, totaling 112.99 million people in 2021. The Greater Los Angeles region has one of the largest economies in the world and is the U.S. headquarters of many international car manufacturers including Honda, Mazda, and Hyundai. Its entertainment industry has generated plenty of tourism and includes world famous beaches, shopping, motion picture studios, and amusement parks. The Hollywood district is known as the “movie capital of the U.S.” and has its historical roots in the country’s film industry. Its port, the Port of Los Angeles and the Port of Long Beach are aggregately one of the world’s busiest ports. The Port of Los Angelesgenerated some 506.43 million U.S. dollars in revenue in 2019.

This data set describes metropolitan areas in the conterminous United States, developed from U.S. Bureau of the Census boundaries of Consolidated Metropolitan Statistical Areas (CMSA) and Metropolitan Statistical Areas (MSA), that have been processed to extract the largest contiguous urban area within each MSA or CMSA.

This statistics shows the top 20 fastest growing large-metropolitan areas in the United States between July 1st, 2022 and July 1st, 2023. The total population in the Wilmington, North Carolina, metropolitan area increased by 0.05 percent from 2022 to 2023.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Metropolitan Divisions subdivide a Metropolitan Statistical Area containing a single core urban area that has a population of at least 2.5 million to form smaller groupings of counties or equivalent entities. Not all Metropolitan Statistical Areas with urban areas of this size will contain Metropolitan Divisions. Metropolitan Division are defined by the Office of Management and Budget (OMB) and consist of one or more main counties or equivalent entities that represent an employment center or centers, plus adjacent counties associated with the main county or counties through commuting ties. Because Metropolitan Divisions represent subdivisions of larger Metropolitan Statistical Areas, it is not appropriate to rank or compare Metropolitan Divisions with Metropolitan and Micropolitan Statistical Areas. The Metropolitan Divisions boundaries are those defined by OMB based on the 2010 Census, published in 2013, and updated in 2017.

This statistics shows a list of the top 20 largest-metropolitan areas in the United States in 2010, by land area. Riverside-San Bernardino-Ontario in California was ranked first enclosing an area of 70,612 square kilometers.

This web map represents geographic entities, defined by the United States Office of Management and Budget for use by Federal statistical agencies, based on the concept of a core area with a large population nucleus, plus adjacent communities having a high degree of economic and social integration with that core.A Core-Based Statistical Area consists of a county containing an Incorporated Place or Census Designated Place with a population of at least 10,000 along with any adjacent counties that have at least 25 percent of employed residents of the county who work in the CBSA's core or central county. CBSAs are categorized as being either Metropolitan or Micropolitan. Each Metropolitan Statistical Area must have at least one urbanized area of 50,000 or more inhabitants. Each Micropolitan Statistical Area must have at least one urban cluster of at least 10,000 but less than 50,000 population.The largest scale the layer is suitable for display is 1:100,000.

In 2023, San Jose-Sunnyvale-Santa Clara Metro area in California was ranked first with median household income of 153,202 U.S. dollars. The Washington-Arlington-Alexandria metro area had a median household income of 121,469 U.S. dollars.

United States US: Population in Largest City: as % of Urban Population data was reported at 7.020 % in 2017. This records a decrease from the previous number of 7.065 % for 2016. United States US: Population in Largest City: as % of Urban Population data is updated yearly, averaging 8.675 % from Dec 1960 (Median) to 2017, with 58 observations. The data reached an all-time high of 11.200 % in 1960 and a record low of 7.020 % in 2017. United States US: Population in Largest City: as % of Urban Population data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s USA – Table US.World Bank.WDI: Population and Urbanization Statistics. Population in largest city is the percentage of a country's urban population living in that country's largest metropolitan area.; ; United Nations, World Urbanization Prospects.; Weighted average;

Important Note: This item is in mature support as of June 2023 and will retire in December 2025. A new version of this item is available for your use.The layers going from 1:1 to 1:1.5M present the 2010 Census Urbanized Areas (UA) and Urban Clusters (UC). A UA consists of contiguous, densely settled census block groups (BGs) and census blocks that meet minimum population density requirements (1000 people per square mile (ppsm) / 500 ppsm), along with adjacent densely settled census blocks that together encompass a population of at least 50,000 people. A UC consists of contiguous, densely settled census BGs and census blocks that meet minimum population density requirements, along with adjacent densely settled census blocks that together encompass a population of at least 2,500 people, but fewer than 50,000 people. The dataset covers the 50 States plus the District of Columbia within United States. The layer going over 1:1.5M presents the urban areas in the United States derived from the urban areas layer of the Digital Chart of the World (DCW). It provides information about the locations, names, and populations of urbanized areas for conducting geographic analysis on national and large regional scales. To download the data for this layer as a layer package for use in ArcGIS desktop applications, refer to USA Census Urban Areas.

In 20212, the San Jose-Sunnyvale-Santa Clara metro area in California had the highest per capita income at 64,169 U.S. dollars. The second highest, San Francisco-Oakland-Berkeley metro area is also located in California.

This interactive map shows variables for the largest 100 metro areas in the nation. Change categories to compare for a single metro or compare between two metros in the comparison tab.Data Sources: US Census/ ACS, US Bureau of Economic Analysis, US Patent and Trademark Office, US Bureau of Labor Statistics.

VITAL SIGNS INDICATOR Daily Miles Traveled (T15)

FULL MEASURE NAME Per-capita vehicle miles traveled

LAST UPDATED July 2017

DESCRIPTION Daily miles traveled, commonly referred to as vehicle miles traveled (VMT), reflects the total and per-person number of miles traveled in personal vehicles on a typical weekday. The dataset includes metropolitan area, regional and county tables for per-capita vehicle miles traveled.

DATA SOURCE Federal Highway Administration: Highway Statistics Series 2015 Table HM-71; limited to urbanized areas https://www.fhwa.dot.gov/policyinformation/statistics.cfm

U.S. Census Bureau: Summary File 1 2010 http://factfinder2.census.gov

CONTACT INFORMATION vitalsigns.info@mtc.ca.gov

METHODOLOGY NOTES (across all datasets for this indicator) "Vehicle miles traveled reflects the mileage accrued within the county and not necessarily the residents of that county; even though most trips are due to local residents, additional VMT can be accrued by through-trips. City data was thus discarded due to this limitation and the analysis only examine county and regional data, where through-trips are generally less common.

The metropolitan area comparison was performed by summing all of the urbanized areas within each metropolitan area (9-nine region for the San Francisco Bay Area and the primary MSA for all others). For the metro analysis, no VMT data is available outside of other urbanized areas; it is only available for intraregional analysis purposes.

VMT per capita is calculated by dividing VMT by an estimate of the traveling population. The traveling population does not include people living in institutionalized facilities, which are defined by the Census. Because institutionalized population is not estimated each year, the proportion of people living in institutionalized facilities from the 2010 Census was applied to the total population estimates for all years."

Disclaimer: These data are updated by the author and are not an official product of the Federal Reserve Bank of Cleveland.This project provides two sets of migration estimates for the major US metro areas. The first series measures net migration of people to and from the urban neighborhoods of the metro areas. The second series covers all neighborhoods but breaks down net migration to other regions by four region types: (1) high-cost metros, (2) affordable, large metros, (3) midsized metros, and (4) small metros and rural areas. These series were introduced in a Cleveland Fed District Data Brief entitled “Urban and Regional Migration Estimates: Will Your City Recover from the Pandemic?"The migration estimates in this project are created with data from the Federal Reserve Bank of New York/Equifax Consumer Credit Panel (CCP). The CCP is a 5 percent random sample of the credit histories maintained by Equifax. The CCP reports the census block of residence for over 10 million individuals each quarter. Each month, Equifax receives individuals’ addresses, along with reports of debt balances and payments, from creditors (mortgage lenders, credit card issuers, student loan servicers, etc.). An algorithm maintained by Equifax considers all of the addresses reported for an individual and identifies the individual’s most likely current address. Equifax anonymizes the data before they are added to the CCP, removing names, addresses, and Social Security numbers (SSNs). In lieu of mailing addresses, the census block of the address is added to the CCP. Equifax creates a unique, anonymous identifier to enable researchers to build individuals’ panels. The panel nature of the data allows us to observe when someone has migrated and is living in a census block different from the one they lived in at the end of the preceding quarter. For more details about the CCP and its use in measuring migration, see Lee and Van der Klaauw (2010) and DeWaard, Johnson and Whitaker (2019). DefinitionsMetropolitan areaThe metropolitan areas in these data are combined statistical areas. This is the most aggregate definition of metro areas, and it combines Washington DC with Baltimore, San Jose with San Francisco, Akron with Cleveland, etc. Metro areas are combinations of counties that are tightly linked by worker commutes and other economic activity. All counties outside of metropolitan areas are tracked as parts of a rural commuting zone (CZ). CZs are also groups of counties linked by commuting, but CZ definitions cover all counties, both metropolitan and non-metropolitan. High-cost metropolitan areasHigh-cost metro areas are those where the median list price for a house was more than $200 per square foot on average between April 2017 and April 2022. These areas include San Francisco-San Jose, New York, San Diego, Los Angeles, Seattle, Boston, Miami, Sacramento, Denver, Salt Lake City, Portland, and Washington-Baltimore. Other Types of RegionsMetro areas with populations above 2 million and house price averages below $200 per square foot are categorized as affordable, large metros. Metro areas with populations between 500,000 and 2 million are categorized as mid-sized metros, regardless of house prices. All remaining counties are in the small metro and rural category.To obtain a metro area's total net migration, sum the four net migration values for the the four types of regions.Urban neighborhoodCensus tracts are designated as urban if they have a population density above 7,000 people per square mile. High density neighborhoods can support walkable retail districts and high-frequency public transportation. They are more likely to have the “street life” that people associate with living in an urban rather than a suburban area. The threshold of 7,000 people per square mile was selected because it was the average density in the largest US cities in the 1930 census. Before World War II, workplaces, shopping, schools and parks had to be accessible on foot. Tracts are also designated as urban if more than half of their housing units were built before WWII and they have a population density above 2,000 people per square mile. The lower population density threshold for the pre-war neighborhoods recognizes that many urban tracts have lost population since the 1960s. While the street grids usually remain, the area also needs su

This statistic shows the leading metropolitan areas with the highest percentage of white population in the United States in 2023. Among the 81 largest metropolitan areas (by population), Knoxville, Tennessee was ranked first with 90.9 percent of residents reporting as white, non-Hispanic in 2023.

This statistic shows annual median household incomes in the United States in the largest metropolitan areas (measured by population). In 2019, the annual median household income in the metropolitan area of New York-Newark-Jersey City was 83,160 U.S. dollars.

This dataset contains estimates for demographic indicators shared by the Big Cities Health Coalition members represented by the largest metropolitan health departments in United States. The estimated values of demographic indicators cover the 2010-2015 period and are described by location, sex and race/ethnicity.

FAF domestic region level datasets and products provide information for states, state portions of large metropolitan areas, and remainders of states. Metropolitan areas consist of Metropolitan Statistical Areas or Consolidated Statistical Areas as defined by the Office of Management and Budget. When a metropolitan area is entirely within a state or when a state's portion of a multi-state metropolitan area is large enough to support the sampling procedures in the Commodity Flow Survey, the area becomes a separate FAF region. Small single-state metropolitan areas and small portions of a multi-state metropolitan area are part of the State or Remainder of State. FAF has two metropolitan areas that are each divided into three FAF regions, four that are each divided into two FAF regions, and several that have small pieces combined with States or Remainders of States.

© United States Department of Transportation, Federal Highway Administration. For more information, see the site http://www.ops.fhwa.dot.gov/freight/freight_analysis/faf/faf3/userguide/index.htm This layer is sourced from maps.bts.dot.gov.

United States US: Population in Largest City data was reported at 18,761,941.000 Person in 2017. This records an increase from the previous number of 18,704,696.000 Person for 2016. United States US: Population in Largest City data is updated yearly, averaging 16,107,057.000 Person from Dec 1960 (Median) to 2017, with 58 observations. The data reached an all-time high of 18,761,941.000 Person in 2017 and a record low of 14,163,521.000 Person in 1960. United States US: Population in Largest City data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s United States – Table US.World Bank.WDI: Population and Urbanization Statistics. Population in largest city is the urban population living in the country's largest metropolitan area.; ; United Nations, World Urbanization Prospects.; ;

Months of Supply: sa: All Residential: Big Rapids, MI data was reported at 2.210 Month in Jul 2020. This records a decrease from the previous number of 2.303 Month for Jun 2020. Months of Supply: sa: All Residential: Big Rapids, MI data is updated monthly, averaging 7.866 Month from Feb 2012 (Median) to Jul 2020, with 102 observations. The data reached an all-time high of 11.155 Month in Jan 2014 and a record low of 2.210 Month in Jul 2020. Months of Supply: sa: All Residential: Big Rapids, MI data remains active status in CEIC and is reported by Redfin. The data is categorized under Global Database’s United States – Table US.EB030: Months of Supply: by Metropolitan Areas: Seasonally Adjusted.