In 2023, the metropolitan area of New York-Newark-Jersey City had the biggest population in the United States. Based on annual estimates from the census, the metropolitan area had around 19.5 million inhabitants, which was a slight decrease from the previous year. The Los Angeles and Chicago metro areas rounded out the top three. What is a metropolitan statistical area? In general, a metropolitan statistical area (MSA) is a core urbanized area with a population of at least 50,000 inhabitants – the smallest MSA is Carson City, with an estimated population of nearly 56,000. The urban area is made bigger by adjacent communities that are socially and economically linked to the center. MSAs are particularly helpful in tracking demographic change over time in large communities and allow officials to see where the largest pockets of inhabitants are in the country. How many MSAs are in the United States? There were 421 metropolitan statistical areas across the U.S. as of July 2021. The largest city in each MSA is designated the principal city and will be the first name in the title. An additional two cities can be added to the title, and these will be listed in population order based on the most recent census. So, in the example of New York-Newark-Jersey City, New York has the highest population, while Jersey City has the lowest. The U.S. Census Bureau conducts an official population count every ten years, and the new count is expected to be announced by the end of 2030.

This data set describes metropolitan areas in the conterminous United States, developed from U.S. Bureau of the Census boundaries of Consolidated Metropolitan Statistical Areas (CMSA) and Metropolitan Statistical Areas (MSA), that have been processed to extract the largest contiguous urban area within each MSA or CMSA.

This statistic provides projected figures for the Gross Metropolitan Product (GMP) of the United States in 2021, by metropolitan area. Only the 100 leading metropolitan areas are shown here. In 2022, the GMP of the New York-Newark-Jersey City metro area is projected to be around of about 2.16 trillion U.S. dollars.

Los Angeles metropolitan area

A metropolitan area in the U.S. is characterized by a relatively high population density and close economic ties through the area, albeit, without the legal incorporation that is found within cities. The Gross Metropolitan Product is measured by the Bureau of Economic Analysis under the U.S. Department of Commerce and includes only metropolitan areas. The GMP of the Los Angeles-Long Beach-Anaheim metropolitan area located in California is projected to be among the highest in the United States in 2021, amounting to 1.1 trillion U.S. dollars. The Houston-The Woodlands-Sugar Land, Texas metro area is estimated to be approximately 543 billion U.S. dollars in the same year.

The Los Angeles metro area had one of the largest populations in the country, totaling 112.99 million people in 2021. The Greater Los Angeles region has one of the largest economies in the world and is the U.S. headquarters of many international car manufacturers including Honda, Mazda, and Hyundai. Its entertainment industry has generated plenty of tourism and includes world famous beaches, shopping, motion picture studios, and amusement parks. The Hollywood district is known as the “movie capital of the U.S.” and has its historical roots in the country’s film industry. Its port, the Port of Los Angeles and the Port of Long Beach are aggregately one of the world’s busiest ports. The Port of Los Angelesgenerated some 506.43 million U.S. dollars in revenue in 2019.

This statistics shows a list of the top 20 largest-metropolitan areas in the United States in 2010, by land area. Riverside-San Bernardino-Ontario in California was ranked first enclosing an area of 70,612 square kilometers.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Metropolitan Divisions subdivide a Metropolitan Statistical Area containing a single core urban area that has a population of at least 2.5 million to form smaller groupings of counties or equivalent entities. Not all Metropolitan Statistical Areas with urban areas of this size will contain Metropolitan Divisions. Metropolitan Division are defined by the Office of Management and Budget (OMB) and consist of one or more main counties or equivalent entities that represent an employment center or centers, plus adjacent counties associated with the main county or counties through commuting ties. Because Metropolitan Divisions represent subdivisions of larger Metropolitan Statistical Areas, it is not appropriate to rank or compare Metropolitan Divisions with Metropolitan and Micropolitan Statistical Areas. The Metropolitan Divisions boundaries are those defined by OMB based on the 2010 Census, published in 2013, and updated in 2017.

Rome is the largest Italian metropolitan area. As of 2024, the urban area of the capital city has a population of around 4.23 million people. Milan and Naples follow with 3.25 million and 2.97 million people, respectively. In terms of inhabitants per square kilometer, Naples, located in the south, has the highest population density. Rome, Milan, and Naples are also Italy's largest cities.

This statistic shows annual median household incomes in the United States in the largest metropolitan areas (measured by population). In 2019, the annual median household income in the metropolitan area of New York-Newark-Jersey City was 83,160 U.S. dollars.

Through a cooperative agreement, RTI International worked with the Bureau of Justice Statistics (BJS) to create public-use files of victimization data for the 52 largest metropolitan statistical areas (MSAs) covering the 2000-2015 survey years. The National Crime Victimization Survey (NCVS) is one of two national indicators of crime in the U.S. Historically, NCVS estimates of crime were not available at the state or local level because, prior to 2016, the NCVS sample was designed to exclusively produce national estimates. It is important to be able to understand victimization and victimization risk at the local level to inform and improve crime prevention efforts, investigation and victim response practices, and the location and mix of victim services. To protect respondent confidentiality, with a few exceptions, subnational identifiers are traditionally not included on NCVS public-use files. Instead, information required to conduct analyses of crime at subnational levels must be accessed through a Federal Statistical Research Data Center (FSRDC) by obtaining Special Sworn Status from the U.S. Census Bureau. To provide a greater number of analysts with access to NCVS subnational data, in 2007 the Bureau of Justice Statistics (BJS) released a public-use file containing person- and incident-level data from 1979-2004 for the "core" counties (i.e., self-representing PSUs) within the 40 largest metropolitan statistical areas (MSAs). To accommodate interest from analysts and other interested parties in updating the file with more recent data, BJS has created public-use files for the 52 largest MSAs covering the 2000-2015 survey years. The 52 MSAs included on these files are those with a 2015 population of 1 million or more persons and an average annual NCVS sample size of at least 250 persons during the period of 2006-2015. While some of the MSAs from these files were also included on the 1979-2004 version, the definitions used to define MSAs are not the same. The 1979-2004 files were based on the "core" counties that were common to the MSA definitions determined by the Office of Management and Budget (OMB) for the 1970-, 1980-, and 1990-based NCVS sample designs. For the current files (i.e., 2000-2015), MSA definitions are based on the most recent delineation files available from OMB at the time of data collection for each survey year included on the files.

The National Crime Victimization Survey (NCVS), previously the National Crime Survey (NCS), has been collecting data on personal and household victimization through an ongoing survey of a nationally-representative sample of residential addresses since 1973. The survey is administered by the United States Census Bureau (under the United States Department of Commerce) on behalf of the Bureau of Justice Statistics (under the United States Department of Justice). Occasionally there have been extract or supplement files created from the NCVS and NCS data series. This extract contains two data files, a weighted person-based file, and a weighted incident-based file, which contain the "core" counties within the top 40 National Crime Victimization Survey Metropolitan Statistical Areas (MSAs). Core counties within these MSAs are defined as those self-representing primary sampling units that are common to the MSA definitions determined by the Office of Management and Budget for the 1970-based, 1980-based, and 1990-based sample designs. Each MSA is comprised of only the core counties and not all counties within the MSA. The person-based file contains select household and person variables for all people in NCVS-interviewed households in the core counties of the 40 largest MSAs from January 1979 through December 2004. The incident-based file contains select household, person, and incident variables for persons who reported a violent crime within any of the core counties of the 40 largest MSAs from January 1979 through December 2004. Household, person, and incident information for persons reporting non-violent crime are excluded from this file. The 40 largest MSAs were determined based on the number of household interviews in an MSA.

United States US: Population in Largest City: as % of Urban Population data was reported at 7.020 % in 2017. This records a decrease from the previous number of 7.065 % for 2016. United States US: Population in Largest City: as % of Urban Population data is updated yearly, averaging 8.675 % from Dec 1960 (Median) to 2017, with 58 observations. The data reached an all-time high of 11.200 % in 1960 and a record low of 7.020 % in 2017. United States US: Population in Largest City: as % of Urban Population data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s USA – Table US.World Bank.WDI: Population and Urbanization Statistics. Population in largest city is the percentage of a country's urban population living in that country's largest metropolitan area.; ; United Nations, World Urbanization Prospects.; Weighted average;

In 2024, approximately 22.81 million people lived in the São Paulo metropolitan area, making it the biggest in Latin America and the Caribbean and the fifth most populated in the world. The homonymous state of São Paulo was also the most populous federal entity in the country. The second place for the region was Mexico City with 22.51 million inhabitants.

Brazil's cities

Brazil is home to two large metropolises, only counting the population within the city limits, São Paulo had approximately 12.4 million inhabitants, and Rio de Janeiro around 6.8 million inhabitants. It also contains a number of smaller, but well known cities such as Brasília, Salvador, Belo Horizonte and many others, which report between 2 and 3 million inhabitants each. As a result, the country's population is primarily urban, with nearly 85 percent of inhabitants living in cities.

Mexico City

Mexico City's metropolitan area ranks fifth in the ranking of most populated cities in the world. Founded over the Aztec city of Tenochtitlan in 1521 after the Spanish conquest as the capital of the Viceroyalty of New Spain, the city still stands as one of the most important in Latin America. Nevertheless, the preeminent economic, political, and cultural position of Mexico City has not prevented the metropolis from suffering the problems affecting the rest of the country, namely, inequality and violence. Only in 2021, the city registered a crime incidence of 45,336 reported cases for every 100,000 inhabitants and around 32 percent of the population lived under the poverty line.

The Brookings Institute study concluded that: Steep employment losses following the Great Recession stalled the steady decentralization of jobs that characterized the early to mid-2000s. However, by 2010 nearly twice the share of jobs was located at least 10 miles away from downtown (43%) as within 3 miles of downtown (23%).Job losses in industries hit hardest by the downturn, including construction and manufacturing, helped check employment decentralization in the late 2000s. In all but nine of the 100 largest metro areas, the share of jobs located within three miles of downtown declined during the 2000s.Metro areas showing the greatest increase in jobs in the 10-35 miles radius from downtown include:Phoenix-Mesa-Glendale, AZ, San Antonio-New Braunfels, TX, Austin-Round Rock-San Marcos, TX, Dallas-Fort Worth-Arlington, TX, and Houston-Sugar Land-Baytown, TX.Metro areas showing the greatest loss of jobs within the 3 mile radius of downtown include:North Port-Bradenton-Sarasota, FL, Boise City-Nampa, ID, Jackson, MS, McAllen-Edinburg-Mission, TX, and Cape Coral-Fort Myers, FLSource:Job Sprawl Stalls: The Great Recession and Metropolitan Employment Location, Metropolitan Policy Program, Brookings Institute. Elizabeth Kneebone. URL: https://www.brookings.edu/research/reports/2013/04/18-job-sprawl-kneebone

VITAL SIGNS INDICATOR Daily Miles Traveled (T15)

FULL MEASURE NAME Per-capita vehicle miles traveled

LAST UPDATED July 2017

DESCRIPTION Daily miles traveled, commonly referred to as vehicle miles traveled (VMT), reflects the total and per-person number of miles traveled in personal vehicles on a typical weekday. The dataset includes metropolitan area, regional and county tables for per-capita vehicle miles traveled.

DATA SOURCE Federal Highway Administration: Highway Statistics Series 2015 Table HM-71; limited to urbanized areas https://www.fhwa.dot.gov/policyinformation/statistics.cfm

U.S. Census Bureau: Summary File 1 2010 http://factfinder2.census.gov

CONTACT INFORMATION vitalsigns.info@mtc.ca.gov

METHODOLOGY NOTES (across all datasets for this indicator) "Vehicle miles traveled reflects the mileage accrued within the county and not necessarily the residents of that county; even though most trips are due to local residents, additional VMT can be accrued by through-trips. City data was thus discarded due to this limitation and the analysis only examine county and regional data, where through-trips are generally less common.

The metropolitan area comparison was performed by summing all of the urbanized areas within each metropolitan area (9-nine region for the San Francisco Bay Area and the primary MSA for all others). For the metro analysis, no VMT data is available outside of other urbanized areas; it is only available for intraregional analysis purposes.

VMT per capita is calculated by dividing VMT by an estimate of the traveling population. The traveling population does not include people living in institutionalized facilities, which are defined by the Census. Because institutionalized population is not estimated each year, the proportion of people living in institutionalized facilities from the 2010 Census was applied to the total population estimates for all years."

This statistics shows the top 20 fastest growing large-metropolitan areas in the United States between July 1st, 2022 and July 1st, 2023. The total population in the Wilmington, North Carolina, metropolitan area increased by 0.05 percent from 2022 to 2023.

This web map represents geographic entities, defined by the United States Office of Management and Budget for use by Federal statistical agencies, based on the concept of a core area with a large population nucleus, plus adjacent communities having a high degree of economic and social integration with that core.A Core-Based Statistical Area consists of a county containing an Incorporated Place or Census Designated Place with a population of at least 10,000 along with any adjacent counties that have at least 25 percent of employed residents of the county who work in the CBSA's core or central county. CBSAs are categorized as being either Metropolitan or Micropolitan. Each Metropolitan Statistical Area must have at least one urbanized area of 50,000 or more inhabitants. Each Micropolitan Statistical Area must have at least one urban cluster of at least 10,000 but less than 50,000 population.The largest scale the layer is suitable for display is 1:100,000.

The 2020 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. Metropolitan Divisions subdivide a Metropolitan Statistical Area containing a single core urban area that has a population of at least 2.5 million to form smaller groupings of counties or equivalent entities. Not all Metropolitan Statistical Areas with urban areas of this size will contain Metropolitan Divisions. Metropolitan Divisions are defined by the Office of Management and Budget (OMB) and consist of one or more main counties or equivalent entities that represent an employment center or centers, plus adjacent counties associated with the main county or counties through commuting ties. Because Metropolitan Divisions represent subdivisions of larger Metropolitan Statistical Areas, it is not appropriate to rank or compare Metropolitan Divisions with Metropolitan and Micropolitan Statistical Areas. The generalized boundaries in this file are based on those defined by OMB based on the 2010 Census, published in 2013, and updated in 2018.

This statistic shows ranking of metropolitan areas with the highest shares of middle-income adults in the United States in 2014. In 2014, the Wausau metropolitan area in Wisconsin was ranked first with 67 percent of adult population living in the middle-income tier.

This dataset contains the consumer price index (CPI) over time for all consumer items for the Atlanta Metropolitan Statistical Area (MSA) and for the largest U.S. metro areas combined. The 2-month change and year-over-year change in CPI is also included.

These data are part of NACJD's Fast Track Release and are distributed as they there received from the data depositor. The files have been zipped by NACJD for release, but not checked or processed except of the removal of direct identifiers. Users should refer to the accompany readme file for a brief description of the files available with this collections and consult the investigator(s) if further information is needed. This study examines municipal crime levels and changes over a nine year time frame, from 2000-2008, in the fifth largest primary Metropolitan Statistical Area (MSA) in the United States, the Philadelphia metropolitan region. Crime levels and crime changes are linked to demographic features of jurisdictions, policing arrangements and coverage levels, and street and public transit network features.

Disclaimer: These data are updated by the author and are not an official product of the Federal Reserve Bank of Cleveland.This project provides two sets of migration estimates for the major US metro areas. The first series measures net migration of people to and from the urban neighborhoods of the metro areas. The second series covers all neighborhoods but breaks down net migration to other regions by four region types: (1) high-cost metros, (2) affordable, large metros, (3) midsized metros, and (4) small metros and rural areas. These series were introduced in a Cleveland Fed District Data Brief entitled “Urban and Regional Migration Estimates: Will Your City Recover from the Pandemic?"The migration estimates in this project are created with data from the Federal Reserve Bank of New York/Equifax Consumer Credit Panel (CCP). The CCP is a 5 percent random sample of the credit histories maintained by Equifax. The CCP reports the census block of residence for over 10 million individuals each quarter. Each month, Equifax receives individuals’ addresses, along with reports of debt balances and payments, from creditors (mortgage lenders, credit card issuers, student loan servicers, etc.). An algorithm maintained by Equifax considers all of the addresses reported for an individual and identifies the individual’s most likely current address. Equifax anonymizes the data before they are added to the CCP, removing names, addresses, and Social Security numbers (SSNs). In lieu of mailing addresses, the census block of the address is added to the CCP. Equifax creates a unique, anonymous identifier to enable researchers to build individuals’ panels. The panel nature of the data allows us to observe when someone has migrated and is living in a census block different from the one they lived in at the end of the preceding quarter. For more details about the CCP and its use in measuring migration, see Lee and Van der Klaauw (2010) and DeWaard, Johnson and Whitaker (2019). DefinitionsMetropolitan areaThe metropolitan areas in these data are combined statistical areas. This is the most aggregate definition of metro areas, and it combines Washington DC with Baltimore, San Jose with San Francisco, Akron with Cleveland, etc. Metro areas are combinations of counties that are tightly linked by worker commutes and other economic activity. All counties outside of metropolitan areas are tracked as parts of a rural commuting zone (CZ). CZs are also groups of counties linked by commuting, but CZ definitions cover all counties, both metropolitan and non-metropolitan. High-cost metropolitan areasHigh-cost metro areas are those where the median list price for a house was more than $200 per square foot on average between April 2017 and April 2022. These areas include San Francisco-San Jose, New York, San Diego, Los Angeles, Seattle, Boston, Miami, Sacramento, Denver, Salt Lake City, Portland, and Washington-Baltimore. Other Types of RegionsMetro areas with populations above 2 million and house price averages below $200 per square foot are categorized as affordable, large metros. Metro areas with populations between 500,000 and 2 million are categorized as mid-sized metros, regardless of house prices. All remaining counties are in the small metro and rural category.To obtain a metro area's total net migration, sum the four net migration values for the the four types of regions.Urban neighborhoodCensus tracts are designated as urban if they have a population density above 7,000 people per square mile. High density neighborhoods can support walkable retail districts and high-frequency public transportation. They are more likely to have the “street life” that people associate with living in an urban rather than a suburban area. The threshold of 7,000 people per square mile was selected because it was the average density in the largest US cities in the 1930 census. Before World War II, workplaces, shopping, schools and parks had to be accessible on foot. Tracts are also designated as urban if more than half of their housing units were built before WWII and they have a population density above 2,000 people per square mile. The lower population density threshold for the pre-war neighborhoods recognizes that many urban tracts have lost population since the 1960s. While the street grids usually remain, the area also needs su