In 2024, approximately 11.9 million people lived in São Paulo, making it the largest municipality in Brazil and one of the most populous cities in the world. The homonymous state of São Paulo was also the most populous federal entity in the country. Brazil's cities Brazil is home to two large metropolises: São Paulo with close to 11.9 million inhabitants, and Rio de Janeiro with around 6.7 million inhabitants. It also contains a number of smaller but well-known cities, such as Brasília, Salvador, Belo Horizonte, and many others, which report between 2 and 3 million inhabitants each. As a result, the country's population is primarily urban, with nearly 88 percent of inhabitants living in cities. While smaller than some of the other cities, Brasília was chosen to be the capital because of its relatively central location. The city is also well-known for its modernist architecture and utopian city plan, which is quite controversial - criticized by many and praised by others. Sports venues capitals A number of Brazil’s medium-sized and large cities were chosen as venues for the 2014 World Cup, and the 2015 Summer Olympics also took place in Rio de Janeiro. Both of these events required large sums of money to support infrastructure and enhance mobility within a number of different cities across the country. Billions of dollars were spent on the 2014 World Cup, which went primarily to stadium construction and renovation but also to a number of different mobility projects. Other short-term spending on infrastructure for the World Cup and the Rio Olympic Games was estimated at 50 billion U.S. dollars. While these events have poured a lot of money into urban infrastructure, a number of social and economic problems within the country remain unsolved.

This is the complete dataset for the 500 Cities project 2016 release. This dataset includes 2013, 2014 model-based small area estimates for 27 measures of chronic disease related to unhealthy behaviors (5), health outcomes (13), and use of preventive services (9). Data were provided by the Centers for Disease Control and Prevention (CDC), Division of Population Health, Epidemiology and Surveillance Branch. The project was funded by the Robert Wood Johnson Foundation (RWJF) in conjunction with the CDC Foundation. It represents a first-of-its kind effort to release information on a large scale for cities and for small areas within those cities. It includes estimates for the 500 largest US cities and approximately 28,000 census tracts within these cities. These estimates can be used to identify emerging health problems and to inform development and implementation of effective, targeted public health prevention activities. Because the small area model cannot detect effects due to local interventions, users are cautioned against using these estimates for program or policy evaluations. Data sources used to generate these measures include Behavioral Risk Factor Surveillance System (BRFSS) data (2013, 2014), Census Bureau 2010 census population data, and American Community Survey (ACS) 2009-2013, 2010-2014 estimates. More information about the methodology can be found at www.cdc.gov/500cities. Note: During the process of uploading the 2015 estimates, CDC found a data discrepancy in the published 500 Cities data for the 2014 city-level obesity crude prevalence estimates caused when reformatting the SAS data file to the open data format. . The small area estimation model and code were correct. This data discrepancy only affected the 2014 city-level obesity crude prevalence estimates on the Socrata open data file, the GIS-friendly data file, and the 500 Cities online application. The other obesity estimates (city-level age-adjusted and tract-level) and the Mapbooks were not affected. No other measures were affected. The correct estimates are update in this dataset on October 25, 2017.

This statistic shows the number of the super-rich, or Ultra-High-Net-Worth, persons in the United States in 2014, sorted by city. New York has the largest concentration of super-rich individuals; about 8,655 UHNW (Ultra High Net Worth) people are living in the metro area.

The statistic depicts the ten largest cities in Mexico in 2020. In 2020, Mexico City had around 8.84 million residents which made it the largest city in Mexico.

Population of Mexico

Mexico is a federal republic located in North America, sharing borders with the United States to the north, and to the southeast with Guatemala and Belize. With a total area of over 1.9 million square kilometers, it is the fourteenth largest nation in the world and the fifth largest in the Americas.

In 2014, Mexico’s total population amounted to approximately 120 million people. A little under two thirds of Mexico’s total population is of Mestizo ethnicity. The total population has steadily grown over the past decade, despite being the source to the largest migration flow between countries in the world; in 2010, around 11.6 million immigrants from Mexico lived in the United States. The migration flow between the United States and Mexico has however, decreased over the past ten years: Between 1995 and 2000, over 2.9 million migrants emigrated from Mexico to the United States. This was more than the double of migrants who emigrated from Mexico to the United States between 2005 and 2010. Each year, Mexico's population grows by about 1.24 percent compared to the previous year. Mexico City, the country’s capital and largest city, is home to approximately 8.6 million people.

This service provides 500 Cities Project 2016 data release based on 2014, 2013 model-based small area estimates for 27 measures of chronic disease related to unhealthy behaviors (5), health outcomes (13), and use of preventive services (9). Data were provided by the Centers for Disease Control and Prevention (CDC), Division of Population Health, Epidemiology and Surveillance Branch. The project was funded by the Robert Wood Johnson Foundation (RWJF) in conjunction with the CDC Foundation. It represents a first-of-its kind effort to release information on a large scale for cities and for small areas within those cities. It includes estimates for the 500 largest US cities and approximately 28,000 census tracts within these cities. These estimates can be used to identify emerging health problems and to inform development and implementation of effective, targeted public health prevention activities. Because the small area model cannot detect effects due to local interventions, users are cautioned against using these estimates for program or policy evaluations. Data sources used to generate these measures include Behavioral Risk Factor Surveillance System (BRFSS) data (2014, 2013), Census Bureau 2010 census population data, and American Community Survey (ACS) 2010-2014, 2009-2013 estimates. For more information about the methodology, visit https://www.cdc.gov/500cities or contact 500Cities@cdc.gov.

This is the complete dataset for the 500 Cities project 2017 release. This dataset includes 2015, 2014 model-based small area estimates for 27 measures of chronic disease related to unhealthy behaviors (5), health outcomes (13), and use of preventive services (9). Data were provided by the Centers for Disease Control and Prevention (CDC), Division of Population Health, Epidemiology and Surveillance Branch. The project was funded by the Robert Wood Johnson Foundation (RWJF) in conjunction with the CDC Foundation. It represents a first-of-its kind effort to release information on a large scale for cities and for small areas within those cities. It includes estimates for the 500 largest US cities and approximately 28,000 census tracts within these cities. These estimates can be used to identify emerging health problems and to inform development and implementation of effective, targeted public health prevention activities. Because the small area model cannot detect effects due to local interventions, users are cautioned against using these estimates for program or policy evaluations. Data sources used to generate these measures include Behavioral Risk Factor Surveillance System (BRFSS) data (2015, 2014), Census Bureau 2010 census population data, and American Community Survey (ACS) 2011-2015, 2010-2014 estimates. Because some questions are only asked every other year in the BRFSS, there are 7 measures from the 2014 BRFSS that are the same in the 2017 release as the previous 2016 release. More information about the methodology can be found at www.cdc.gov/500cities.

According to figures recently released by the United States Census, America’s largest metro areas are currently gaining population at impressive rates. The growth in these areas is in fact driving much of the population growth across the nation. Upon closer examination of the data, this growth is the result of two very different migrations – one coming from the location choices of Americans themselves, the other shaped by where new immigrants from outside the United States are heading.While many metro areas are attracting a net-inflow of migrants from other parts of the country, in several of the largest metros – New York, Los Angeles., and Miami, especially – there is actually a net outflow of Americans to the rest of the country. Immigration is driving population growth in these places. Sunbelt metros like Houston, Dallas, and Phoenix, and knowledge hubs like Austin, Seattle, San Francisco, and the District of Columbia are gaining much more from domestic migration.This map charts overall or net migration – a combination of domestic and international migration. Most large metros, those with at least a million residents, had more people coming in than leaving. The metros with the highest levels of population growth due to migration are a mix of knowledge-based economies and Sunbelt metros, including Houston, Dallas, Miami, District of Columbia, San Francisco, Seattle, and Austin. Eleven large metros, nearly all in or near the Rustbelt, had a net outflow of migrants, including Chicago, Detroit, Memphis, Philadelphia, and Saint Louis.Source: Atlantic Cities

description:

This is the complete dataset for the 500 Cities project. This dataset includes 2013, 2014 model-based small area estimates for 27 measures of chronic disease related to unhealthy behaviors (5), health outcomes (13), and use of preventive services (9). Data were provided by the Centers for Disease Control and Prevention (CDC), Division of Population Health, Epidemiology and Surveillance Branch. The project was funded by the Robert Wood Johnson Foundation (RWJF) in conjunction with the CDC Foundation. It represents a first-of-its kind effort to release information on a large scale for cities and for small areas within those cities. It includes estimates for the 500 largest US cities and approximately 28,000 census tracts within these cities. These estimates can be used to identify emerging health problems and to inform development and implementation of effective, targeted public health prevention activities. Because the small area model cannot detect effects due to local interventions, users are cautioned against using these estimates for program or policy evaluations. Data sources used to generate these measures include Behavioral Risk Factor Surveillance System (BRFSS) data (2013, 2014), Census Bureau 2010 census population data, and American Community Survey (ACS) 2009-2013, 2010-2014 estimates. More information about the methodology can be found at www.cdc.gov/500cities.

This is the complete dataset for the 500 Cities project. This dataset includes 2013, 2014 model-based small area estimates for 27 measures of chronic disease related to unhealthy behaviors (5), health outcomes (13), and use of preventive services (9). Data were provided by the Centers for Disease Control and Prevention (CDC), Division of Population Health, Epidemiology and Surveillance Branch. The project was funded by the Robert Wood Johnson Foundation (RWJF) in conjunction with the CDC Foundation. It represents a first-of-its kind effort to release information on a large scale for cities and for small areas within those cities. It includes estimates for the 500 largest US cities and approximately 28,000 census tracts within these cities. These estimates can be used to identify emerging health problems and to inform development and implementation of effective, targeted public health prevention activities. Because the small area model cannot detect effects due to local interventions, users are cautioned against using these estimates for program or policy evaluations. Data sources used to generate these measures include Behavioral Risk Factor Surveillance System (BRFSS) data (2013, 2014), Census Bureau 2010 census population data, and American Community Survey (ACS) 2009-2013, 2010-2014 estimates. More information about the methodology can be found at www.cdc.gov/500cities.

This is the filtered dataset of LA Census Tracts from the 500 Cities project 2017 release. This dataset includes 2015, 2014 model-based small area estimates for 27 measures of chronic disease related to unhealthy behaviors (5), health outcomes (13), and use of preventive services (9). Data were provided by the Centers for Disease Control and Prevention (CDC), Division of Population Health, Epidemiology and Surveillance Branch. The project was funded by the Robert Wood Johnson Foundation (RWJF) in conjunction with the CDC Foundation. It represents a first-of-its kind effort to release information on a large scale for cities and for small areas within those cities. It includes estimates for the 500 largest US cities and approximately 28,000 census tracts within these cities. These estimates can be used to identify emerging health problems and to inform development and implementation of effective, targeted public health prevention activities. Because the small area model cannot detect effects due to local interventions, users are cautioned against using these estimates for program or policy evaluations. Data sources used to generate these measures include Behavioral Risk Factor Surveillance System (BRFSS) data (2015, 2014), Census Bureau 2010 census population data, and American Community Survey (ACS) 2011-2015, 2010-2014 estimates. Because some questions are only asked every other year in the BRFSS, there are 7 measures from the 2014 BRFSS that are the same in the 2017 release as the previous 2016 release. More information about the methodology can be found at www.cdc.gov/500cities.

This data layer produced by the National Center for Education Statistics’ (NCES) Education Demographic and Geographic Estimates (EDGE) program provides a geographic locale framework that classifies all U.S. territory into twelve categories ranging from Large Cities to Remote Rural areas. NCES uses this framework to describe the type of geographic area where schools and school districts are located. The criteria for these classifications are defined by NCES, but they rely on standard geographic areas developed and maintained by the U.S. Census Bureau. The 2014 NCES Locale boundaries are based on geographic areas represented in Census TIGER/Line 2014. The NCES EDGE program collaborates with the U.S. Census Bureau’s Education Demographic, Geographic, and Economic Statistics (EDGE) Branch to annually update the locale boundaries. For more information about the NCES locale framework, and to download the data, see: https://nces.ed.gov/programs/edge/Geographic/LocaleBoundaries. The classifications include:Large City (11): Territory inside an Urbanized Area and inside a Principal City with population of 250,000 or more.Midsize City (12): Territory inside an Urbanized Area and inside a Principal City with population less than 250,000 and greater than or equal to 100,000.Small City (13): Territory inside an Urbanized Area and inside a Principal City with population less than 100,000.Suburb – Large (21): Territory outside a Principal City and inside an Urbanized Area with population of 250,000 or more.Suburb - Midsize (22): Territory outside a Principal City and inside an Urbanized Area with population less than 250,000 and greater than or equal to 100,000.Suburb - Small (23): Territory outside a Principal City and inside an Urbanized Area with population less than 100,000.Town - Fringe (31): Territory inside an Urban Cluster that is less than or equal to 10 miles from an Urbanized Area.Town - Distant (32): Territory inside an Urban Cluster that is more than 10 miles and less than or equal to 35 miles from an Urbanized Area.Town - Remote (33): Territory inside an Urban Cluster that is more than 35 miles of an Urbanized Area.Rural - Fringe (41): Census-defined rural territory that is less than or equal to 5 miles from an Urbanized Area, as well as rural territory that is less than or equal to 2.5 miles from an Urban Cluster.Rural - Distant (42): Census-defined rural territory that is more than 5 miles but less than or equal to 25 miles from an Urbanized Area, as well as rural territory that is more than 2.5 miles but less than or equal to 10 miles from an Urban Cluster.Rural - Remote (43): Census-defined rural territory that is more than 25 miles from an Urbanized Area and is also more than 10 miles from an Urban Cluster.All information contained in this file is in the public _domain. Data users are advised to review NCES program documentation and feature class metadata to understand the limitations and appropriate use of these data.

This is the complete dataset for the 500 Cities project 2016 release. This dataset includes 2013, 2014 model-based small area estimates for 27 measures of chronic disease related to unhealthy behaviors (5), health outcomes (13), and use of preventive services (9). Data were provided by the Centers for Disease Control and Prevention (CDC), Division of Population Health, Epidemiology and Surveillance Branch. The project was funded by the Robert Wood Johnson Foundation (RWJF) in conjunction with the CDC Foundation. It represents a first-of-its kind effort to release information on a large scale for cities and for small areas within those cities. It includes estimates for the 500 largest US cities and approximately 28,000 census tracts within these cities. These estimates can be used to identify emerging health problems and to inform development and implementation of effective, targeted public health prevention activities. Because the small area model cannot detect effects due to local interventions, users are cautioned against using these estimates for program or policy evaluations. Data sources used to generate these measures include Behavioral Risk Factor Surveillance System (BRFSS) data (2013, 2014), Census Bureau 2010 census population data, and American Community Survey (ACS) 2009-2013, 2010-2014 estimates. More information about the methodology can be found at www.cdc.gov/500cities. Note: During the process of uploading the 2015 estimates, CDC found a data discrepancy in the published 500 Cities data for the 2014 city-level obesity crude prevalence estimates caused when reformatting the SAS data file to the open data format. . The small area estimation model and code were correct. This data discrepancy only affected the 2014 city-level obesity crude prevalence estimates on the Socrata open data file, the GIS-friendly data file, and the 500 Cities online application. The other obesity estimates (city-level age-adjusted and tract-level) and the Mapbooks were not affected. No other measures were affected. The correct estimates are update in this dataset on October 25, 2017.

This statistic shows the top ten metropolitan areas in the United States with highest unauthorized immigrant populations in 2014. With over one million unauthorized people, New York-Newark-Jersey City, NY-NJ-PA had the highest illegal immigrant population in the United States in 2014.

This service provides 500 Cities Project 2017 data release based on 2015, 2014 model-based small area estimates for 27 measures of chronic disease related to unhealthy behaviors (5), health outcomes (13), and use of preventive services (9). Data were provided by the Centers for Disease Control and Prevention (CDC), Division of Population Health, Epidemiology and Surveillance Branch. The project was funded by the Robert Wood Johnson Foundation (RWJF) in conjunction with the CDC Foundation. It represents a first-of-its kind effort to release information on a large scale for cities and for small areas within those cities. It includes estimates for the 500 largest US cities and approximately 28,000 census tracts within these cities. These estimates can be used to identify emerging health problems and to inform development and implementation of effective, targeted public health prevention activities. Because the small area model cannot detect effects due to local interventions, users are cautioned against using these estimates for program or policy evaluations. Data sources used to generate these measures include Behavioral Risk Factor Surveillance System (BRFSS) data (2014, 2015), Census Bureau 2010 census population data, and American Community Survey (ACS) 2010-2014, 2011-2015 estimates. Because some questions are only asked every other year in the BRFSS, there are 7 measures from the 2014 BRFSS that are the same in the 2017 release as the previous 2016 release. For more information about the methodology, visit https://www.cdc.gov/500cities or contact 500Cities@cdc.gov.

Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Data and Documentation section...Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau''s Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities and towns and estimates of housing units for states and counties..Explanation of Symbols:An ''**'' entry in the margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate..An ''-'' entry in the estimate column indicates that either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution..An ''-'' following a median estimate means the median falls in the lowest interval of an open-ended distribution..An ''+'' following a median estimate means the median falls in the upper interval of an open-ended distribution..An ''***'' entry in the margin of error column indicates that the median falls in the lowest interval or upper interval of an open-ended distribution. A statistical test is not appropriate..An ''*****'' entry in the margin of error column indicates that the estimate is controlled. A statistical test for sampling variability is not appropriate. .An ''N'' entry in the estimate and margin of error columns indicates that data for this geographic area cannot be displayed because the number of sample cases is too small..An ''(X)'' means that the estimate is not applicable or not available..Estimates of urban and rural population, housing units, and characteristics reflect boundaries of urban areas defined based on Census 2010 data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..While the 2014 American Community Survey (ACS) data generally reflect the February 2013 Office of Management and Budget (OMB) definitions of metropolitan and micropolitan statistical areas; in certain instances the names, codes, and boundaries of the principal cities shown in ACS tables may differ from the OMB definitions due to differences in the effective dates of the geographic entities..Tables for ACS data year 2010 and later are not completely comparable to the table based on 2009 ACS data due to slight changes in the field of degree coding and classifications. More information can be found at http://www.census.gov/hhes/socdemo/education/data/acs/index.html..Respondents could report more than one major for their bachelor's degree. This table only counts the first major that was reported and does not necessarily reflect the first degree earned..Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables..Source: U.S. Census Bureau, 2014 American Community Survey 1-Year Estimates

1. Data were provided by the Centers for Disease Control and Prevention (CDC), Division of Population Health, Epidemiology and Surveillance Branch. The project was funded by the Robert Wood Johnson Foundation (RWJF) in conjunction with the CDC Foundation. This is a filtered subset of the 500 Cities data that provides model-based small area estimates for 27 measures of chronic disease related to unhealthy behaviors (5), health outcomes (13), and use of preventive services (9). It represents a first-of-its kind effort to release information on a large scale for cities and for small areas within those cities. It includes estimates for the 500 largest US cities and approximately 28,000 census tracts within these cities. These estimates can be used to identify emerging health problems and to inform development and implementation of effective, targeted public health prevention activities. Because the small area model cannot detect effects due to local interventions, users are cautioned against using these estimates for program or policy evaluations. Data sources used to generate these measures include Behavioral Risk Factor Surveillance System (BRFSS) data 2014, Census Bureau 2010 census population data, and American Community Survey (ACS) 2010-2014 estimates. More information about the methodology can be found at www.cdc.gov/500cities.

Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Data and Documentation section...Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau''s Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities and towns and estimates of housing units for states and counties..Explanation of Symbols:An ''**'' entry in the margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate..An ''-'' entry in the estimate column indicates that either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution..An ''-'' following a median estimate means the median falls in the lowest interval of an open-ended distribution..An ''+'' following a median estimate means the median falls in the upper interval of an open-ended distribution..An ''***'' entry in the margin of error column indicates that the median falls in the lowest interval or upper interval of an open-ended distribution. A statistical test is not appropriate..An ''*****'' entry in the margin of error column indicates that the estimate is controlled. A statistical test for sampling variability is not appropriate. .An ''N'' entry in the estimate and margin of error columns indicates that data for this geographic area cannot be displayed because the number of sample cases is too small..An ''(X)'' means that the estimate is not applicable or not available..Estimates of urban and rural population, housing units, and characteristics reflect boundaries of urban areas defined based on Census 2010 data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..While the 2014 American Community Survey (ACS) data generally reflect the February 2013 Office of Management and Budget (OMB) definitions of metropolitan and micropolitan statistical areas; in certain instances the names, codes, and boundaries of the principal cities shown in ACS tables may differ from the OMB definitions due to differences in the effective dates of the geographic entities..Tables for ACS data year 2010 and later are not completely comparable to the table based on 2009 ACS data due to slight changes in the field of degree coding and classifications. More information can be found at http://www.census.gov/hhes/socdemo/education/data/acs/index.html..Respondents could report more than one major for their bachelor's degree. This table only counts the first major that was reported and does not necessarily reflect the first degree earned..Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables..Source: U.S. Census Bureau, 2014 American Community Survey 1-Year Estimates

Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Data and Documentation section...Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau''s Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities and towns and estimates of housing units for states and counties..Explanation of Symbols:An ''**'' entry in the margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate..An ''-'' entry in the estimate column indicates that either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution..An ''-'' following a median estimate means the median falls in the lowest interval of an open-ended distribution..An ''+'' following a median estimate means the median falls in the upper interval of an open-ended distribution..An ''***'' entry in the margin of error column indicates that the median falls in the lowest interval or upper interval of an open-ended distribution. A statistical test is not appropriate..An ''*****'' entry in the margin of error column indicates that the estimate is controlled. A statistical test for sampling variability is not appropriate. .An ''N'' entry in the estimate and margin of error columns indicates that data for this geographic area cannot be displayed because the number of sample cases is too small..An ''(X)'' means that the estimate is not applicable or not available..Estimates of urban and rural population, housing units, and characteristics reflect boundaries of urban areas defined based on Census 2010 data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..While the 2010-2014 American Community Survey (ACS) data generally reflect the February 2013 Office of Management and Budget (OMB) definitions of metropolitan and micropolitan statistical areas; in certain instances the names, codes, and boundaries of the principal cities shown in ACS tables may differ from the OMB definitions due to differences in the effective dates of the geographic entities..Tables for ACS data year 2010 and later are not completely comparable to the table based on 2009 ACS data due to slight changes in the field of degree coding and classifications. More information can be found at http://www.census.gov/hhes/socdemo/education/data/acs/index.html..Respondents could report more than one major for their bachelor's degree. This table only counts the first major that was reported and does not necessarily reflect the first degree earned..Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables..Source: U.S. Census Bureau, 2010-2014 American Community Survey 5-Year Estimates

This is the complete dataset for the 500 Cities project 2017 release. This dataset includes 2015, 2014 model-based small area estimates for 27 measures of chronic disease related to unhealthy behaviors (5), health outcomes (13), and use of preventive services (9). Data were provided by the Centers for Disease Control and Prevention (CDC), Division of Population Health, Epidemiology and Surveillance Branch. The project was funded by the Robert Wood Johnson Foundation (RWJF) in conjunction with the CDC Foundation. It represents a first-of-its kind effort to release information on a large scale for cities and for small areas within those cities. It includes estimates for the 500 largest US cities and approximately 28,000 census tracts within these cities. These estimates can be used to identify emerging health problems and to inform development and implementation of effective, targeted public health prevention activities. Because the small area model cannot detect effects due to local interventions, users are cautioned against using these estimates for program or policy evaluations. Data sources used to generate these measures include Behavioral Risk Factor Surveillance System (BRFSS) data (2015, 2014), Census Bureau 2010 census population data, and American Community Survey (ACS) 2011-2015, 2010-2014 estimates. Because some questions are only asked every other year in the BRFSS, there are 7 measures from the 2014 BRFSS that are the same in the 2017 release as the previous 2016 release. More information about the methodology can be found at www.cdc.gov/500cities.

Milwaukee is the largest city in the state of Wisconsin and the fifth-largest city in the Midwestern United States. The county seat of Milwaukee County, it is on Lake Michigan's western shore. Ranked by estimated 2014 population, Milwaukee was the 31st largest city in the United States.[7] The city's estimated population in 2015 was 600,155.[8] Milwaukee is the main cultural and economic center of the Milwaukee metropolitan area. It is also part of the larger Milwaukee-Racine-Waukesha combined statistical area, which had an estimated population of 2,026,243 in the 2010 census. Milwaukee is also the second most densely populated metropolitan area in the Midwest, surpassed only by Chicago. View our Open Data Policy by selecting the link below, https://city.milwaukee.gov/ImageLibrary/Groups/cityOpenData/MilwaukeeOpenDataPolicy.pdf

1. Data were provided by the Centers for Disease Control and Prevention (CDC), Division of Population Health, Epidemiology and Surveillance Branch. The project was funded by the Robert Wood Johnson Foundation (RWJF) in conjunction with the CDC Foundation. This is a filtered subset of the 500 Cities data that provides model-based small area estimates for 27 measures of chronic disease related to unhealthy behaviors (5), health outcomes (13), and use of preventive services (9). It represents a first-of-its kind effort to release information on a large scale for cities and for small areas within those cities. It includes estimates for the 500 largest US cities and approximately 28,000 census tracts within these cities. These estimates can be used to identify emerging health problems and to inform development and implementation of effective, targeted public health prevention activities. Because the small area model cannot detect effects due to local interventions, users are cautioned against using these estimates for program or policy evaluations. Data sources used to generate these measures include Behavioral Risk Factor Surveillance System (BRFSS) data 2014, Census Bureau 2010 census population data, and American Community Survey (ACS) 2010-2014 estimates. More information about the methodology can be found at www.cdc.gov/500cities.