This dataset is part of the Geographical repository maintained by Opendatasoft. This dataset contains data for counties and equivalent entities in United States of America. The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities.Processors and tools are using this data. Enhancements Add ISO 3166-3 codes. Simplify geometries to provide better performance across the services. Add administrative hierarchy.

Russia is the largest country in the world by far, with a total area of just over 17 million square kilometers. After Antarctica, the next three countries are Canada, the U.S., and China; all between 9.5 and 10 million square kilometers. The figures given include internal water surface area (such as lakes or rivers) - if the figures were for land surface only then China would be the second largest country in the world, the U.S. third, and Canada (the country with more lakes than the rest of the world combined) fourth. Russia Russia has a population of around 145 million people, putting it in the top ten most populous countries in the world, and making it the most populous in Europe. However, it's vast size gives it a very low population density, ranked among the bottom 20 countries. Most of Russia's population is concentrated in the west, with around 75 percent of the population living in the European part, while around 75 percent of Russia's territory is in Asia; the Ural Mountains are considered the continental border. Elsewhere in the world Beyond Russia, the world's largest countries all have distinctive topographies and climates setting them apart. The United States, for example, has climates ranging from tundra in Alaska to tropical forests in Florida, with various mountain ranges, deserts, plains, and forests in between. Populations in these countries are often concentrated in urban areas, and are not evenly distributed across the country. For example, around 85 percent of Canada's population lives within 100 miles of the U.S. border; around 95 percent of China lives east of the Heihe–Tengchong Line that splits the country; and the majority of populations in large countries such as Australia or Brazil live near the coast.

The statistic shows the largest countries in South America, based on land area. Brazil is the largest country by far, with a total area of over 8.5 million square kilometers, followed by Argentina, with almost 2.8 million square kilometers.

This statistic depicts the greatest concentrations of different Hispanic origin groups in different counties across the United States as of 2010. At this time there were 3,510,677 people of Mexican origin living in Los Angeles County in California.

WARNING: This is a pre-release dataset and its fields names and data structures are subject to change. It should be considered pre-release until the end of 2024. Expected changes:

• Metadata is missing or incomplete for some layers at this time and will be continuously improved.
  
• We expect to update this layer roughly in line with CDTFA at some point, but will increase the update cadence over time as we are able to automate the final pieces of the process.

Purpose

County and incorporated place (city) boundaries along with third party identifiers used to join in external data. Boundaries are from the authoritative source the California Department of Tax and Fee Administration (CDTFA), altered to show the counties as one polygon. This layer displays the city polygons on top of the County polygons so the area isn"t interrupted. The GEOID attribute information is added from the US Census. GEOID is based on merged State and County FIPS codes for the Counties. Abbreviations for Counties and Cities were added from Caltrans Division of Local Assistance (DLA) data. Place Type was populated with information extracted from the Census. Names and IDs from the US Board on Geographic Names (BGN), the authoritative source of place names as published in the Geographic Name Information System (GNIS), are attached as well. Finally, coastal buffers are removed, leaving the land-based portions of jurisdictions. This feature layer is for public use.

Related Layers

This dataset is part of a grouping of many datasets:

1. Cities: Only the city boundaries and attributes, without any unincorporated areas
   • With Coastal Buffers
   • Without Coastal Buffers
2. Counties: Full county boundaries and attributes, including all cities within as a single polygon
   • With Coastal Buffers
   • Without Coastal Buffers
3. Cities and Full Counties: A merge of the other two layers, so polygons overlap within city boundaries. Some customers require this behavior, so we provide it as a separate service.
   • With Coastal Buffers
   • Without Coastal Buffers (this dataset)
4. Place Abbreviations
5. Unincorporated Areas (Coming Soon)
6. Census Designated Places (Coming Soon)
   
7. Cartographic Coastline
   • Polygon
   • Line source (Coming Soon)

Point of Contact

California Department of Technology, Office of Digital Services, odsdataservices@state.ca.gov

Field and Abbreviation Definitions

• COPRI: county number followed by the 3-digit city primary number used in the Board of Equalization"s 6-digit tax rate area numbering system
• Place Name: CDTFA incorporated (city) or county name
• County: CDTFA county name. For counties, this will be the name of the polygon itself. For cities, it is the name of the county the city polygon is within.
• Legal Place Name: Board on Geographic Names authorized nomenclature for area names published in the Geographic Name Information System
• GNIS_ID: The numeric identifier from the Board on Geographic Names that can be used to join these boundaries to other datasets utilizing this identifier.
• GEOID: numeric geographic identifiers from the US Census Bureau Place Type: Board on Geographic Names authorized nomenclature for boundary type published in the Geographic Name Information System
• Place Abbr: CalTrans Division of Local Assistance abbreviations of incorporated area names
• CNTY Abbr: CalTrans Division of Local Assistance abbreviations of county names
• Area_SqMi: The area of the administrative unit (city or county) in square miles, calculated in EPSG 3310 California Teale Albers.
• COASTAL: Indicates if the polygon is a coastal buffer. Null for land polygons. Additional values include "ocean" and "bay".
• GlobalID: While all of the layers we provide in this dataset include a GlobalID field with unique values, we do not recommend you make any use of it. The GlobalID field exists to support offline sync, but is not persistent, so data keyed to it will be orphaned at our next update. Use one of the other persistent identifiers, such as GNIS_ID or GEOID instead.

Accuracy

CDTFA"s source data notes the following about accuracy:

City boundary changes and county boundary line adjustments filed with the Board of Equalization per Government Code 54900. This GIS layer contains the boundaries of the unincorporated county and incorporated cities within the state of California. The initial dataset was created in March of 2015 and was based on the State Board of Equalization tax rate area boundaries. As of April 1, 2024, the maintenance of this dataset is provided by the California Department of Tax and Fee Administration for the purpose of determining sales and use tax rates. The boundaries are continuously being revised to align with aerial imagery when areas of conflict are discovered between the original boundary provided by the California State Board of Equalization and the boundary made publicly available by local, state, and federal government. Some differences may occur between actual recorded boundaries and the boundaries used for sales and use tax purposes. The boundaries in this map are representations of taxing jurisdictions for the purpose of determining sales and use tax rates and should not be used to determine precise city or county boundary line locations. COUNTY = county name; CITY = city name or unincorporated territory; COPRI =

This map shows population density of the United States. Areas in darker magenta have much higher population per square mile than areas in orange or yellow. Data is from the U.S. Census Bureau’s 2020 Census Demographic and Housing Characteristics. The map's layers contain total population counts by sex, age, and race groups for Nation, State, County, Census Tract, and Block Group in the United States and Puerto Rico. From the Census:"Population density allows for broad comparison of settlement intensity across geographic areas. In the U.S., population density is typically expressed as the number of people per square mile of land area. The U.S. value is calculated by dividing the total U.S. population (316 million in 2013) by the total U.S. land area (3.5 million square miles).When comparing population density values for different geographic areas, then, it is helpful to keep in mind that the values are most useful for small areas, such as neighborhoods. For larger areas (especially at the state or country scale), overall population density values are less likely to provide a meaningful measure of the density levels at which people actually live, but can be useful for comparing settlement intensity across geographies of similar scale." SourceAbout the dataYou can use this map as is and you can also modify it to use other attributes included in its layers. This map's layers contain total population counts by sex, age, and race groups data from the 2020 Census Demographic and Housing Characteristics. This is shown by Nation, State, County, Census Tract, Block Group boundaries. Each geography layer contains a common set of Census counts based on available attributes from the U.S. Census Bureau. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.Vintage of boundaries and attributes: 2020 Demographic and Housing Characteristics Table(s): P1, H1, H3, P2, P3, P5, P12, P13, P17, PCT12 (Not all lines of these DHC tables are available in this feature layer.)Data downloaded from: U.S. Census Bureau’s data.census.gov siteDate the Data was Downloaded: May 25, 2023Geography Levels included: Nation, State, County, Census Tract, Block GroupNational Figures: included in Nation layer The United States Census Bureau Demographic and Housing Characteristics: 2020 Census Results 2020 Census Data Quality Geography & 2020 Census Technical Documentation Data Table Guide: includes the final list of tables, lowest level of geography by table and table shells for the Demographic Profile and Demographic and Housing Characteristics.News & Updates This map is ready to be used in ArcGIS Pro, ArcGIS Online and its configurable apps, Story Maps, dashboards, Notebooks, Python, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the U.S. Census Bureau when using this data. Data Processing Notes: These 2020 Census boundaries come from the US Census TIGER geodatabases. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For Census tracts and block groups, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract and block group boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are unchanged and available as attributes within the data table (units are square meters).  The layer contains all US states, Washington D.C., and Puerto Rico. Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Block groups that fall within the same criteria (Block Group denoted as 0 with no area land) have also been removed.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.

A dataset listing Alabama counties by population for 2024.

A dataset listing Florida counties by population for 2024.

A dataset listing Georgia counties by population for 2024.

About this dataset

Context

The dataset presents median household incomes for various household sizes in Big Stone County, MN, as reported by the U.S. Census Bureau. The dataset highlights the variation in median household income with the size of the family unit, offering valuable insights into economic trends and disparities within different household sizes, aiding in data analysis and decision-making.

Key observations

• Of the 7 household sizes (1 person to 7-or-more person households) reported by the census bureau, Big Stone County did not include 6, or 7-person households. Across the different household sizes in Big Stone County the mean income is $84,455, and the standard deviation is $38,967. The coefficient of variation (CV) is 46.14%. This high CV indicates high relative variability, suggesting that the incomes vary significantly across different sizes of households.
• In the most recent year, 2021, The smallest household size for which the bureau reported a median household income was 1-person households, with an income of $24,444. It then further increased to $129,034 for 5-person households, the largest household size for which the bureau reported a median household income.

https://i.neilsberg.com/ch/big-stone-county-mn-median-household-income-by-household-size.jpeg" alt="Big Stone County, MN median household income, by household size (in 2022 inflation-adjusted dollars)">

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2017-2021 5-Year Estimates.

Household Sizes:

• 1-person households
• 2-person households
• 3-person households
• 4-person households
• 5-person households
• 6-person households
• 7-or-more-person households

Variables / Data Columns

• Household Size: This column showcases 7 household sizes ranging from 1-person households to 7-or-more-person households (As mentioned above).
• Median Household Income: Median household income, in 2022 inflation-adjusted dollars for the specific household size.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Big Stone County median household income. You can refer the same here

This map's colors indicate which population is larger in each area: urban (green) or rural (yellow). The map's layers contain total population counts by sex, age, and race groups for Nation, State Legislative Districts Upper, State Legislative Districts Lower, Congressional District in the United States and Puerto Rico.The U.S. Census designates each census block as part of an urban area or as rural. Larger geographies in this map such as block group, tract, county and state can therefore have a mix of urban and rural population. This map illustrates the 100% urban areas in dark green, and 100% rural areas in dark yellow. Areas with mixed urban/rural population have softer shades of green or yellow, to give a visual indication of where change may be happening. From the Census:"The Census Bureau’s urban-rural classification is a delineation of geographic areas, identifying both individual urban areas and the rural area of the nation. The Census Bureau’s urban areas represent densely developed territory, and encompass residential, commercial, and other non-residential urban land uses. The Census Bureau delineates urban areas after each decennial census by applying specified criteria to decennial census and other data. Rural encompasses all population, housing, and territory not included within an urban area.For the 2020 Census, an urban area will comprise a densely settled core of census blocks that meet minimum housing unit density and/or population density requirements. This includes adjacent territory containing non-residential urban land uses. To qualify as an urban area, the territory identified according to criteria must encompass at least 2,000 housing units or have a population of at least 5,000." SourceAbout the dataYou can use this map as is and you can also modify it to use other attributes included in its layers. This map's layers contain total population counts by sex, age, and race groups data from the 2020 Census Demographic and Housing Characteristics. This is shown by Nation, State, County, Census Tract, Block Group boundaries. Each geography layer contains a common set of Census counts based on available attributes from the U.S. Census Bureau. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.Vintage of boundaries and attributes: 2020 Demographic and Housing Characteristics Table(s): P1, H1, H3, P2, P3, P5, P12, P13, P17, PCT12 (Not all lines of these DHC tables are available in this feature layer.)Data downloaded from: U.S. Census Bureau’s data.census.gov siteDate the Data was Downloaded: May 25, 2023Geography Levels included: Nation, State, County, Census Tract, Block GroupNational Figures: included in Nation layer The United States Census Bureau Demographic and Housing Characteristics: 2020 Census Results 2020 Census Data Quality Geography & 2020 Census Technical Documentation Data Table Guide: includes the final list of tables, lowest level of geography by table and table shells for the Demographic Profile and Demographic and Housing Characteristics.News & Updates This map is ready to be used in ArcGIS Pro, ArcGIS Online and its configurable apps, Story Maps, dashboards, Notebooks, Python, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the U.S. Census Bureau when using this data. Data Processing Notes: These 2020 Census boundaries come from the US Census TIGER geodatabases. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For Census tracts and block groups, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract and block group boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are unchanged and available as attributes within the data table (units are square meters).  The layer contains all US states, Washington D.C., and Puerto Rico. Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Block groups that fall within the same criteria (Block Group denoted as 0 with no area land) have also been removed.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.

Unpublished data product not for circulation Persistent Poverty tracts*Persistent poverty area and enduring poverty area measures with reference year 2015-2019 are research measures only. The ERS offical measures are updated every ten years. The next updates will use 1960 through 2000 Decennial Census data and 2007-2011 and 2017-2021 5-year ACS estimates. The updates will take place following the Census Bureau release of the 2017-2021 estimates (anticipated December 2022).A reliability index is calculated for each poverty rate (PctPoor) derived using poverty count estimates and published margins of error from the 5-yr ACS. If the poverty rate estimate has low reliability (=3) AND the upper (PctPoor + derived MOE) or lower (PctPoor - derived MOE) bounds of the MOE adjusted poverty rate would change the poverty status of the estimate (high = 20.0% or more; extreme = 40.0% or more) then the county/tract type is coded as "N/A". If looking at metrics named "PerPov0711" and PerPov1519" ERS says: The official measure ending in 2007-11 included data from 1980. The research measure ending in 2015-19 drops 1980 and begins instead with 1990. There were huge differences in geographic coverage of census tracts and data quality between 1980 and 1990, namely "because tract geography wasn’t assigned to all areas of the country until the 1990 Decennial Census. Last date edited 9/1/2022Variable NamesVariable Labels and ValuesNotesGeographic VariablesGEO_ID_CTCensus download GEOID when downloading county and tract data togetherSTUSABState Postal AbbreviationfipsCounty FIPS code, in numericCountyNameArea Name (county, state)TractNameArea Name (tract, county, state)TractCensus Tract numberRegionCensus region numeric code 1 = Northeast 2 = Midwest 3 = South 4 = Westsubreg3ERS subregions 1 = Northeast and Great Lakes 2 = Eastern Metropolitan Belt 3 = Eastern and Interior Uplands 4 = Corn Belt 5 = Southeastern Coast 6 = Southern Coastal Plain 7 = Great Plains 8 = Rio Grande and Southwest 9 = West, Alaska and HawaiiMetNonmet2013Metro and nonmetro county code 0 = nonmetro county 1 = metro countyBeale2013ERS Rural-urban Continuum Code 2013 (counties) 1 = counties in metro area of 1 million population or more 2 = counties in metro area of 250,000 to 1 million population 3 = counties in metro area of fewer than 250,000 population 4 = urban population of 20,000 or more, adjacent to a metro area 5 = urban population of 20,000 or more, not adjacent to a metro area 6 = urban population of 2,500 to 19,999, adjacent to a metro area 7 = urban population of 2,500 to 19,999, not adjacent to a metro area 8 = completely rural or less than 2,500, adjacent to a metro area 9 = completely rural or less than 2,500, not adjacent to a metro areaRUCA_2010Rural Urban Commuting Areas, primary code (census tracts) 1 = Metropolitan area core: primary flow within an urbanized area (UA) 2 = Metropolitan area high commuting: primary flow 30% or more to a UA 3 = Metropolitan area low commuting: primary flow 10% to 30% to a UA 4 = Micropolitan area core: primary flow within an Urban Cluster of 10,000 to 49,999 (large UC) 5 = Micropolitan high commuting: primary flow 30% or more to a large UC 6 = Micropolitan low commuting: primary flow 10% to 30% to a large UC 7 = Small town core: primary flow within an Urban Cluster of 2,500 to 9,999 (small UC) 8 = Small town high commuting: primary flow 30% or more to a small UC 9 = Small town low commuting: primary flow 10% to 30% to a small UC 10 = Rural areas: primary flow to a tract outside a UA or UC 99 = Not coded: Census tract has zero population and no rural-urban identifier informationBNA01Census tract represents block numbering areas; BNAs are small statistical subdivisions of a county for numbering and grouping blocks in nonmetropolitan counties where local committees have not established tracts. 0 = not a BNA tract 1 = BNA tractPoverty Areas MeasuresHiPov60Poverty Rate greater than or equal to 20.0% 1960 (counties only) -1 = N/A 0 = PctPoor60 < 20.0% 1 = PctPoor60 >= 20.0%HiPov70Poverty Rate greater than or equal to 20.0% 1970 -1 = N/A 0 = PctPoor70 < 20.0% 1 = PctPoor70 >= 20.0%HiPov80Poverty Rate greater than or equal to 20.0% 1980 -1 = N/A 0 = PctPoor80 < 20.0% 1 = PctPoor80 >= 20.0%HiPov90Poverty Rate greater than or equal to 20.0% 1990 -1 = N/A 0 = PctPoor90 < 20.0% 1 = PctPoor90 >= 20.0%HiPov00Poverty Rate greater than or equal to 20.0% 2000 -1 = N/A 0 = PctPoor00 < 20.0% 1 = PctPoor00 >= 20.0%HiPov0711Poverty Rate greater than or equal to 20.0% 2007-11 ACS -1 = N/A 0 = PctPoor0711 < 20.0% 1 = PctPoor0711 >= 20.0%HiPov1519Poverty Rate greater than or equal to 20.0% 2015-19 ACS -1 = N/A 0 = PctPoor1519 < 20.0% 1 = PctPoor1519 >= 20.0%ExtPov60Poverty Rate greater than or equal to 40.0% 1960 (counties only) -1 = N/A 0 = PctPoor60 < 40.0% 1 = PctPoor60 >= 40.0%ExtPov70Poverty Rate greater than or equal to 40.0% 1970 -1 = N/A 0 = PctPoor70 < 40.0% 1 = PctPoor70 >= 40.0%ExtPov80Poverty Rate greater than or equal to 40.0% 1980 -1 = N/A 0 = PctPoor80 < 40.0% 1 = PctPoor80 >= 40.0%ExtPov90Poverty Rate greater than or equal to 40.0% 1990 -1 = N/A 0 = PctPoor90 < 40.0% 1 = PctPoor90 >= 40.0%ExtPov00Poverty Rate greater than or equal to 40.0% 2000 -1 = N/A 0 = PctPoor00 < 40.0% 1 = PctPoor00 >= 40.0%ExtPov0711Poverty Rate greater than or equal to 40.0% 2007-11 ACS -1 = N/A 0 = PctPoor0711 < 40.0% 1 = PctPoor0711 >= 40.0%ExtPov1519Poverty Rate greater than or equal to 40.0% 2015-19 ACS -1 = N/A 0 = PctPoor1519 < 40.0% 1 = PctPoor1519 >= 40.0%PerPov90Official ERS Measure: Persistent Poverty 1990: poverty rate >= 20.0% in 1960, 1970, 1980, and 1990 (counties only) May not match previously published versions due to changes in geographic normalization procedures. -1 = N/A 0 = poverty rate not >= 20.0% in 1960, 1970, 1980, and 1990 1 = poverty rate >= 20.0% in 1960, 1970, 1980, and 1990PerPov00Official ERS Measure: Persistent Poverty 2000: poverty rate >= 20.0% in 1970, 1980, 1990, and 2000May not match previously published versions due to changes in geographic normalization procedures. -1 = N/A 0 = poverty rate not >= 20.0% in 1970, 1980, 1990, and 2000 1 = poverty rate >= 20.0% in 1970, 1980, 1990, and 2000PerPov0711Official ERS Measure: Persistent Poverty 2007-11: poverty rate >= 20.0% in 1980, 1990, 2000, and 2007-11May not match previously published versions due to changes in geographic normalization procedures and -1 = N/A application of reliability criteria. 0 = poverty rate not >= 20.0% in 1980, 1990, 2000, and 2007-11 1 = poverty rate >= 20.0% in 1980, 1990, 2000, and 2007-11PerPov1519Research Measure Only: Persistent Poverty 2015-19: poverty rate >= 20.0% in 1990, 2000, 2007-11, and 2015May not match previously published versions due to changes in geographic normalization procedures and -1 = N/A application of reliability criteria. 0 = poverty rate not >= 20.0% in 1990, 2000, 2007-11, and 2015-19 1 = poverty rate >= 20.0% in 1990, 2000, 2007-11, and 2015-19EndurePov0711Official ERS Measure: Enduring Poverty 2007-11: poverty rate >= 20.0% for at least 5 consecutive time periods up-to and including 2007-11 -1 = N/A 0 = Poverty Rate not >=20.0% in 1970, 1980, 1990, 2000, and 2007-11 1 = poverty rate >= 20.0% in 1970, 1980, 1990, 2000, and 2007-11 2 = poverty rate >=20.0% in 1960, 1970, 1980, 1990, 2000, and 2007-11 (counties only)EndurePov1519Research Measure Only: Enduring Poverty 2015-19: poverty rate >= 20.0% for at least 5 consecutive time periods, up-to and including 2015-19 -1 = N/A 0 = Poverty Rate not >=20.0% in 1980, 1990, 2000, 2007-11, and 2015-19 1 = poverty rate >= 20.0% in 1980, 1990, 2000, 2007-11, and 2015-19 2 = poverty rate >= 20.0% in 1970, 1980, 1990, 2000, 2007-11, and 2015-19 3 = poverty rate >=20.0% in 1960, 1970, 1980, 1990, 2000, 2007-11, and 2015-19 (counties only)Additional Notes: *In the combined data tab each variable ends with a 'C' for county and a 'T' for tractThe spreadsheet was joined to Esri's Living Atlas Social Vulnerability Tract Data (CDC) and therefore contains the following information as well: ATSDR’s Geospatial Research, Analysis & Services Program (GRASP) has created a tool to help emergency response planners and public health officials identify and map the communities that will most likely need support before, during, and after a hazardous event. The Social Vulnerability Index (SVI) uses U.S. Census data to determine the social vulnerability of every county and tract. CDC SVI ranks each county and tract on 15 social factors, including poverty, lack of vehicle access, and crowded housing, and groups them into four related themes:SocioeconomicHousing Composition and DisabilityMinority Status and LanguageHousing and TransportationThis feature layer visualizes the 2018 overall SVI for U.S. counties and tracts. Social Vulnerability Index (SVI) indicates the relative vulnerability of every U.S. county and tract.15 social factors grouped into four major themes | Index value calculated for each county for the 15 social factors, four major themes, and the overall rank

The estimated median age gives an idea of the age distribution of the population in a given area. A greater median age would suggest that the area of interest has a relatively large number of older residents, while a lower median age suggests that the area has a relatively large number of younger residents.

Champaign County’s estimated median age has risen for over a decade, but has always stayed between 28 and 31. Year-to-year changes from 2017 to 2019 were statistically significant, but not from 2019 to 2023. The Champaign County estimated median age has been consistently younger than the estimated median ages of the United States and State of Illinois. Champaign County’s figure is likely impacted to some degree by the large student population associated with the University of Illinois.

The estimated median age does not provide a significant amount of detail, and it does not provide any information on why the estimated median age is what it is. However, when placed in the context of other pieces of data and other indicators, it is a valuable starting point in understanding county demographics.

Estimated median age data was sourced from the U.S. Census Bureau’s American Community Survey (ACS) 1-Year Estimates, which are released annually.

As with any datasets that are estimates rather than exact counts, it is important to take into account the margins of error (listed in the column beside each figure) when drawing conclusions from the data.

Due to the impact of the COVID-19 pandemic, instead of providing the standard 1-year data products, the Census Bureau released experimental estimates from the 1-year data in 2020. This includes a limited number of data tables for the nation, states, and the District of Columbia. The Census Bureau states that the 2020 ACS 1-year experimental tables use an experimental estimation methodology and should not be compared with other ACS data. For these reasons, and because data is not available for Champaign County, no data for 2020 is included in this Indicator.

For interested data users, the 2020 ACS 1-Year Experimental data release includes a dataset on Median Age by Sex.

Sources: U.S. Census Bureau; American Community Survey, 2023 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using data.census.gov; (8 October 2024).; U.S. Census Bureau; American Community Survey, 2022 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using data.census.gov; (6 October 2023).; U.S. Census Bureau; American Community Survey, 2021 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using data.census.gov; (13 October 2022).; U.S. Census Bureau; American Community Survey, 2019 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using data.census.gov; (7 April 2021).; U.S. Census Bureau; American Community Survey, 2018 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using data.census.gov; (7 April 2021).; U.S. Census Bureau; American Community Survey, 2017 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using American FactFinder; (13 September 2018).; U.S. Census Bureau; American Community Survey, 2016 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using American FactFinder; (14 September 2017).; U.S. Census Bureau; American Community Survey, 2015 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using American FactFinder; (19 September 2016).; U.S. Census Bureau; American Community Survey, 2014 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using American FactFinder; (16 March 2016).; U.S. Census Bureau; American Community Survey, 2013 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using American FactFinder; (16 March 2016).; U.S. Census Bureau; American Community Survey, 2012 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using American FactFinder; (16 March 2016).; U.S. Census Bureau; American Community Survey, 2011 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using American FactFinder; (16 March 2016).; U.S. Census Bureau; American Community Survey, 2010 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using American FactFinder; (16 March 2016).; U.S. Census Bureau; American Community Survey, 2009 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using American FactFinder; (16 March 2016).; U.S. Census Bureau; American Community Survey, 2008 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using American FactFinder; (16 March 2016).; U.S. Census Bureau; American Community Survey, 2007 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using American FactFinder; (16 March 2016).; U.S. Census Bureau; American Community Survey, 2006 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using American FactFinder; (16 March 2016).; U.S. Census Bureau; American Community Survey, 2005 American Community Survey 1-Year Estimates, Table S0101; generated by CCRPC staff; using American FactFinder; (16 March 2016).

About this dataset

Context

The dataset presents median household incomes for various household sizes in San Bernardino County, CA, as reported by the U.S. Census Bureau. The dataset highlights the variation in median household income with the size of the family unit, offering valuable insights into economic trends and disparities within different household sizes, aiding in data analysis and decision-making.

Key observations

• Of the 7 household sizes (1 person to 7-or-more person households) reported by the census bureau, all of the household sizes were found in San Bernardino County. Across the different household sizes in San Bernardino County the mean income is $86,959, and the standard deviation is $25,311. The coefficient of variation (CV) is 29.11%. This high CV indicates high relative variability, suggesting that the incomes vary significantly across different sizes of households.
• In the most recent year, 2021, The smallest household size for which the bureau reported a median household income was 1-person households, with an income of $35,348. It then further increased to $109,134 for 7-person households, the largest household size for which the bureau reported a median household income.

https://i.neilsberg.com/ch/san-bernardino-county-ca-median-household-income-by-household-size.jpeg" alt="San Bernardino County, CA median household income, by household size (in 2022 inflation-adjusted dollars)">

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2017-2021 5-Year Estimates.

Household Sizes:

• 1-person households
• 2-person households
• 3-person households
• 4-person households
• 5-person households
• 6-person households
• 7-or-more-person households

Variables / Data Columns

• Household Size: This column showcases 7 household sizes ranging from 1-person households to 7-or-more-person households (As mentioned above).
• Median Household Income: Median household income, in 2022 inflation-adjusted dollars for the specific household size.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for San Bernardino County median household income. You can refer the same here

About this dataset

Context

This list ranks the 22 cities in the Benton County, AR by American Indian and Alaska Native (AIAN) population, as estimated by the United States Census Bureau. It also highlights population changes in each cities over the past five years.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 5-Year Estimates, including:

• 2019-2023 American Community Survey 5-Year Estimates
• 2018-2022 American Community Survey 5-Year Estimates
• 2017-2021 American Community Survey 5-Year Estimates
• 2016-2020 American Community Survey 5-Year Estimates
• 2015-2019 American Community Survey 5-Year Estimates

Variables / Data Columns

• Rank by Native American Population: This column displays the rank of cities in the Benton County, AR by their American Indian and Alaska Native (AIAN) population, using the most recent ACS data available.
• cities: The cities for which the rank is shown in the previous column.
• Native American Population: The Native American population of the cities is shown in this column.
• % of Total cities Population: This shows what percentage of the total cities population identifies as Native American. Please note that the sum of all percentages may not equal one due to rounding of values.
• % of Total Benton County Native American Population: This tells us how much of the entire Benton County, AR Native American population lives in that cities. Please note that the sum of all percentages may not equal one due to rounding of values.
• 5 Year Rank Trend: TThis column displays the rank trend across the last 5 years.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

About this dataset

Context

The dataset presents median household incomes for various household sizes in Clark County, WA, as reported by the U.S. Census Bureau. The dataset highlights the variation in median household income with the size of the family unit, offering valuable insights into economic trends and disparities within different household sizes, aiding in data analysis and decision-making.

Key observations

• Of the 7 household sizes (1 person to 7-or-more person households) reported by the census bureau, all of the household sizes were found in Clark County. Across the different household sizes in Clark County the mean income is $106,979, and the standard deviation is $27,377. The coefficient of variation (CV) is 25.59%. This high CV indicates high relative variability, suggesting that the incomes vary significantly across different sizes of households.
• In the most recent year, 2021, The smallest household size for which the bureau reported a median household income was 1-person households, with an income of $50,121. It then further increased to $127,641 for 7-person households, the largest household size for which the bureau reported a median household income.

https://i.neilsberg.com/ch/clark-county-wa-median-household-income-by-household-size.jpeg" alt="Clark County, WA median household income, by household size (in 2022 inflation-adjusted dollars)">

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2017-2021 5-Year Estimates.

Household Sizes:

• 1-person households
• 2-person households
• 3-person households
• 4-person households
• 5-person households
• 6-person households
• 7-or-more-person households

Variables / Data Columns

• Household Size: This column showcases 7 household sizes ranging from 1-person households to 7-or-more-person households (As mentioned above).
• Median Household Income: Median household income, in 2022 inflation-adjusted dollars for the specific household size.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Clark County median household income. You can refer the same here

For the fiscal year of 2019, Maricopa County Library District in Arizona had the highest legal service area by population, serving a community of over *** million people. Los Angeles Public Library and New York Public Library occupy second and third place respectively.

This statistic shows the 50 metropolitan areas with the highest birth rate in the United States in 2023. Birth rate is the total number of live births per 1,000 of a population in a particular year. The Hinesville metro area in Georgia was ranked first with 18.69 births per 1,000 residents in 2023.

This statistic depicts the largest Guatemalan-American population groups living in different counties across the United States as of 2010. At this time there were 214,939 people of Guatemalan origin living in Los Angeles County in California.