In 2023, the metropolitan area of New York-Newark-Jersey City had the biggest population in the United States. Based on annual estimates from the census, the metropolitan area had around 19.5 million inhabitants, which was a slight decrease from the previous year. The Los Angeles and Chicago metro areas rounded out the top three. What is a metropolitan statistical area? In general, a metropolitan statistical area (MSA) is a core urbanized area with a population of at least 50,000 inhabitants – the smallest MSA is Carson City, with an estimated population of nearly 56,000. The urban area is made bigger by adjacent communities that are socially and economically linked to the center. MSAs are particularly helpful in tracking demographic change over time in large communities and allow officials to see where the largest pockets of inhabitants are in the country. How many MSAs are in the United States? There were 421 metropolitan statistical areas across the U.S. as of July 2021. The largest city in each MSA is designated the principal city and will be the first name in the title. An additional two cities can be added to the title, and these will be listed in population order based on the most recent census. So, in the example of New York-Newark-Jersey City, New York has the highest population, while Jersey City has the lowest. The U.S. Census Bureau conducts an official population count every ten years, and the new count is expected to be announced by the end of 2030.

This statistic provides projected figures for the Gross Metropolitan Product (GMP) of the United States in 2021, by metropolitan area. Only the 100 leading metropolitan areas are shown here. In 2022, the GMP of the New York-Newark-Jersey City metro area is projected to be around of about 2.16 trillion U.S. dollars.

Los Angeles metropolitan area

A metropolitan area in the U.S. is characterized by a relatively high population density and close economic ties through the area, albeit, without the legal incorporation that is found within cities. The Gross Metropolitan Product is measured by the Bureau of Economic Analysis under the U.S. Department of Commerce and includes only metropolitan areas. The GMP of the Los Angeles-Long Beach-Anaheim metropolitan area located in California is projected to be among the highest in the United States in 2021, amounting to 1.1 trillion U.S. dollars. The Houston-The Woodlands-Sugar Land, Texas metro area is estimated to be approximately 543 billion U.S. dollars in the same year.

The Los Angeles metro area had one of the largest populations in the country, totaling 112.99 million people in 2021. The Greater Los Angeles region has one of the largest economies in the world and is the U.S. headquarters of many international car manufacturers including Honda, Mazda, and Hyundai. Its entertainment industry has generated plenty of tourism and includes world famous beaches, shopping, motion picture studios, and amusement parks. The Hollywood district is known as the “movie capital of the U.S.” and has its historical roots in the country’s film industry. Its port, the Port of Los Angeles and the Port of Long Beach are aggregately one of the world’s busiest ports. The Port of Los Angelesgenerated some 506.43 million U.S. dollars in revenue in 2019.

U.S. Core Based Statistical Areas represents geographic entities, defined by the United States Office of Management and Budget (OMB) for use by Federal statistical agencies, based on the concept of a core area with a large population nucleus, plus adjacent communities having a high degree of social and economic integration with that core. A Core Based Statistical Area (CBSA) consists of a U.S. county or counties or equivalent entities associated with at least one urban core (urbanized area or urban cluster) with a population of at least 10,000 along with any adjacent counties having a high degree of social and economic integration with the core as measured through commuting ties with the counties containing the core. CBSAs are categorized as being either Metropolitan or Micropolitan. Each Metropolitan Statistical Area must have at least one urbanized area of 50,000 or more inhabitants. Each Micropolitan Statistical Area must have at least one urban cluster with a population of at least 10,000 but less than 50,000.Estimated 2018 total population is included along with many demographic attributes from the 2010 Census. CBSA features that are new since the 2010 Census have null demographic attributes values.

This statistics shows the top 20 fastest growing large-metropolitan areas in the United States between July 1st, 2022 and July 1st, 2023. The total population in the Wilmington, North Carolina, metropolitan area increased by 0.05 percent from 2022 to 2023.

This data set describes metropolitan areas in the conterminous United States, developed from U.S. Bureau of the Census boundaries of Consolidated Metropolitan Statistical Areas (CMSA) and Metropolitan Statistical Areas (MSA), that have been processed to extract the largest contiguous urban area within each MSA or CMSA.

This statistics shows a list of the top 20 largest-metropolitan areas in the United States in 2010, by land area. Riverside-San Bernardino-Ontario in California was ranked first enclosing an area of 70,612 square kilometers.

This web map represents geographic entities, defined by the United States Office of Management and Budget for use by Federal statistical agencies, based on the concept of a core area with a large population nucleus, plus adjacent communities having a high degree of economic and social integration with that core.A Core-Based Statistical Area consists of a county containing an Incorporated Place or Census Designated Place with a population of at least 10,000 along with any adjacent counties that have at least 25 percent of employed residents of the county who work in the CBSA's core or central county. CBSAs are categorized as being either Metropolitan or Micropolitan. Each Metropolitan Statistical Area must have at least one urbanized area of 50,000 or more inhabitants. Each Micropolitan Statistical Area must have at least one urban cluster of at least 10,000 but less than 50,000 population.The largest scale the layer is suitable for display is 1:100,000.

VITAL SIGNS INDICATOR Daily Miles Traveled (T15)

FULL MEASURE NAME Per-capita vehicle miles traveled

LAST UPDATED July 2017

DESCRIPTION Daily miles traveled, commonly referred to as vehicle miles traveled (VMT), reflects the total and per-person number of miles traveled in personal vehicles on a typical weekday. The dataset includes metropolitan area, regional and county tables for per-capita vehicle miles traveled.

DATA SOURCE Federal Highway Administration: Highway Statistics Series 2015 Table HM-71; limited to urbanized areas https://www.fhwa.dot.gov/policyinformation/statistics.cfm

U.S. Census Bureau: Summary File 1 2010 http://factfinder2.census.gov

CONTACT INFORMATION vitalsigns.info@mtc.ca.gov

METHODOLOGY NOTES (across all datasets for this indicator) "Vehicle miles traveled reflects the mileage accrued within the county and not necessarily the residents of that county; even though most trips are due to local residents, additional VMT can be accrued by through-trips. City data was thus discarded due to this limitation and the analysis only examine county and regional data, where through-trips are generally less common.

The metropolitan area comparison was performed by summing all of the urbanized areas within each metropolitan area (9-nine region for the San Francisco Bay Area and the primary MSA for all others). For the metro analysis, no VMT data is available outside of other urbanized areas; it is only available for intraregional analysis purposes.

VMT per capita is calculated by dividing VMT by an estimate of the traveling population. The traveling population does not include people living in institutionalized facilities, which are defined by the Census. Because institutionalized population is not estimated each year, the proportion of people living in institutionalized facilities from the 2010 Census was applied to the total population estimates for all years."

Disclaimer: These data are updated by the author and are not an official product of the Federal Reserve Bank of Cleveland.This project provides two sets of migration estimates for the major US metro areas. The first series measures net migration of people to and from the urban neighborhoods of the metro areas. The second series covers all neighborhoods but breaks down net migration to other regions by four region types: (1) high-cost metros, (2) affordable, large metros, (3) midsized metros, and (4) small metros and rural areas. These series were introduced in a Cleveland Fed District Data Brief entitled “Urban and Regional Migration Estimates: Will Your City Recover from the Pandemic?"The migration estimates in this project are created with data from the Federal Reserve Bank of New York/Equifax Consumer Credit Panel (CCP). The CCP is a 5 percent random sample of the credit histories maintained by Equifax. The CCP reports the census block of residence for over 10 million individuals each quarter. Each month, Equifax receives individuals’ addresses, along with reports of debt balances and payments, from creditors (mortgage lenders, credit card issuers, student loan servicers, etc.). An algorithm maintained by Equifax considers all of the addresses reported for an individual and identifies the individual’s most likely current address. Equifax anonymizes the data before they are added to the CCP, removing names, addresses, and Social Security numbers (SSNs). In lieu of mailing addresses, the census block of the address is added to the CCP. Equifax creates a unique, anonymous identifier to enable researchers to build individuals’ panels. The panel nature of the data allows us to observe when someone has migrated and is living in a census block different from the one they lived in at the end of the preceding quarter. For more details about the CCP and its use in measuring migration, see Lee and Van der Klaauw (2010) and DeWaard, Johnson and Whitaker (2019). DefinitionsMetropolitan areaThe metropolitan areas in these data are combined statistical areas. This is the most aggregate definition of metro areas, and it combines Washington DC with Baltimore, San Jose with San Francisco, Akron with Cleveland, etc. Metro areas are combinations of counties that are tightly linked by worker commutes and other economic activity. All counties outside of metropolitan areas are tracked as parts of a rural commuting zone (CZ). CZs are also groups of counties linked by commuting, but CZ definitions cover all counties, both metropolitan and non-metropolitan. High-cost metropolitan areasHigh-cost metro areas are those where the median list price for a house was more than $200 per square foot on average between April 2017 and April 2022. These areas include San Francisco-San Jose, New York, San Diego, Los Angeles, Seattle, Boston, Miami, Sacramento, Denver, Salt Lake City, Portland, and Washington-Baltimore. Other Types of RegionsMetro areas with populations above 2 million and house price averages below $200 per square foot are categorized as affordable, large metros. Metro areas with populations between 500,000 and 2 million are categorized as mid-sized metros, regardless of house prices. All remaining counties are in the small metro and rural category.To obtain a metro area's total net migration, sum the four net migration values for the the four types of regions.Urban neighborhoodCensus tracts are designated as urban if they have a population density above 7,000 people per square mile. High density neighborhoods can support walkable retail districts and high-frequency public transportation. They are more likely to have the “street life” that people associate with living in an urban rather than a suburban area. The threshold of 7,000 people per square mile was selected because it was the average density in the largest US cities in the 1930 census. Before World War II, workplaces, shopping, schools and parks had to be accessible on foot. Tracts are also designated as urban if more than half of their housing units were built before WWII and they have a population density above 2,000 people per square mile. The lower population density threshold for the pre-war neighborhoods recognizes that many urban tracts have lost population since the 1960s. While the street grids usually remain, the area also needs su

This interactive map shows variables for the largest 100 metro areas in the nation. Change categories to compare for a single metro or compare between two metros in the comparison tab.Data Sources: US Census/ ACS, US Bureau of Economic Analysis, US Patent and Trademark Office, US Bureau of Labor Statistics.

In 2023, San Jose-Sunnyvale-Santa Clara Metro area in California was ranked first with median household income of 153,202 U.S. dollars. The Washington-Arlington-Alexandria metro area had a median household income of 121,469 U.S. dollars.

This statistic shows the leading metropolitan areas with the highest percentage of population aged 65 years and over in the United States in 2019. In 2019, The Villages, Florida was ranked first with about 59.5 percent of its population aged 65 years and over.

This dataset contains the consumer price index (CPI) over time for all consumer items for the Atlanta Metropolitan Statistical Area (MSA) and for the largest U.S. metro areas combined. The 2-month change and year-over-year change in CPI is also included.

This multi-scale map shows counts of the total population the US. Data is from U.S. Census Bureau's 2020 PL 94-171 data for county, tract, block group, and block.County and metro area highlights:The largest county in the United States in 2020 remains Los Angeles County with over 10 million people.The largest city (incorporated place) in the United States in 2020 remains New York with 8.8 million people.312 of the 384 U.S. metro areas gained population between 2010 and 2020.The fastest-growing U.S. metro area between the 2010 Census and 2020 Census was The Villages, FL, which grew 39% from about 93,000 people to about 130,000 people.72 U.S. metro areas lost population from the 2010 Census to the 2020 Census. The U.S. metro areas with the largest percentage declines were Pine Bluff, AR, and Danville, IL, at -12.5 percent and -9.1 percent, respectively.View more 2020 Census statistics highlights on local populations changes.

Chart and table of population level and growth rate for the Charlotte metro area from 1950 to 2025. United Nations population projections are also included through the year 2035.

In 20212, the San Jose-Sunnyvale-Santa Clara metro area in California had the highest per capita income at 64,169 U.S. dollars. The second highest, San Francisco-Oakland-Berkeley metro area is also located in California.

United States US: Population in Largest City: as % of Urban Population data was reported at 7.020 % in 2017. This records a decrease from the previous number of 7.065 % for 2016. United States US: Population in Largest City: as % of Urban Population data is updated yearly, averaging 8.675 % from Dec 1960 (Median) to 2017, with 58 observations. The data reached an all-time high of 11.200 % in 1960 and a record low of 7.020 % in 2017. United States US: Population in Largest City: as % of Urban Population data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s USA – Table US.World Bank.WDI: Population and Urbanization Statistics. Population in largest city is the percentage of a country's urban population living in that country's largest metropolitan area.; ; United Nations, World Urbanization Prospects.; Weighted average;

Salt Lake City was the U.S. metro with the highest retail real estate investment growth in 2024. The value of capital allocated to retail real estate in Salt Lake City was approximately 551 million U.S. dollars, an increase of 178 percent since 2023. Meanwhile, South Florida was the market with the highest volume of investment. Overall, the value of retail real estate investment has declined notably since 2021, mostly due to the overall cooling of the commercial property market.

FAF domestic region level datasets and products provide information for states, state portions of large metropolitan areas, and remainders of states. Metropolitan areas consist of Metropolitan Statistical Areas or Consolidated Statistical Areas as defined by the Office of Management and Budget. When a metropolitan area is entirely within a state or when a state's portion of a multi-state metropolitan area is large enough to support the sampling procedures in the Commodity Flow Survey, the area becomes a separate FAF region. Small single-state metropolitan areas and small portions of a multi-state metropolitan area are part of the State or Remainder of State. FAF has two metropolitan areas that are each divided into three FAF regions, four that are each divided into two FAF regions, and several that have small pieces combined with States or Remainders of States.

© United States Department of Transportation, Federal Highway Administration. For more information, see the site http://www.ops.fhwa.dot.gov/freight/freight_analysis/faf/faf3/userguide/index.htm This layer is sourced from maps.bts.dot.gov.

This statistic shows the leading metropolitan areas in the United States in 2021, by the rate of fraud complaints lodged with the Federal Trade Commission. In 2021, the metropolitan area with the highest rate was Tuscaloosa, Alabama, where 3,691 incidents occurred per 100,000 population.