This map shows population density of the United States. Areas in darker magenta have much higher population per square mile than areas in orange or yellow. Data is from the U.S. Census Bureau’s 2020 Census Demographic and Housing Characteristics. The map's layers contain total population counts by sex, age, and race groups for Nation, State, County, Census Tract, and Block Group in the United States and Puerto Rico. From the Census:"Population density allows for broad comparison of settlement intensity across geographic areas. In the U.S., population density is typically expressed as the number of people per square mile of land area. The U.S. value is calculated by dividing the total U.S. population (316 million in 2013) by the total U.S. land area (3.5 million square miles).When comparing population density values for different geographic areas, then, it is helpful to keep in mind that the values are most useful for small areas, such as neighborhoods. For larger areas (especially at the state or country scale), overall population density values are less likely to provide a meaningful measure of the density levels at which people actually live, but can be useful for comparing settlement intensity across geographies of similar scale." SourceAbout the dataYou can use this map as is and you can also modify it to use other attributes included in its layers. This map's layers contain total population counts by sex, age, and race groups data from the 2020 Census Demographic and Housing Characteristics. This is shown by Nation, State, County, Census Tract, Block Group boundaries. Each geography layer contains a common set of Census counts based on available attributes from the U.S. Census Bureau. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.Vintage of boundaries and attributes: 2020 Demographic and Housing Characteristics Table(s): P1, H1, H3, P2, P3, P5, P12, P13, P17, PCT12 (Not all lines of these DHC tables are available in this feature layer.)Data downloaded from: U.S. Census Bureau’s data.census.gov siteDate the Data was Downloaded: May 25, 2023Geography Levels included: Nation, State, County, Census Tract, Block GroupNational Figures: included in Nation layer The United States Census Bureau Demographic and Housing Characteristics: 2020 Census Results 2020 Census Data Quality Geography & 2020 Census Technical Documentation Data Table Guide: includes the final list of tables, lowest level of geography by table and table shells for the Demographic Profile and Demographic and Housing Characteristics.News & Updates This map is ready to be used in ArcGIS Pro, ArcGIS Online and its configurable apps, Story Maps, dashboards, Notebooks, Python, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the U.S. Census Bureau when using this data. Data Processing Notes: These 2020 Census boundaries come from the US Census TIGER geodatabases. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For Census tracts and block groups, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract and block group boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are unchanged and available as attributes within the data table (units are square meters).  The layer contains all US states, Washington D.C., and Puerto Rico. Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Block groups that fall within the same criteria (Block Group denoted as 0 with no area land) have also been removed.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.

The Decennial Census provides population estimates and demographic information on residents of the United States.

The Census Summary Files contain detailed tables on responses to the decennial census. Data tables in Summary File 1 provide information on population and housing characteristics, including cross-tabulations of age, sex, households, families, relationship to householder, housing units, detailed race and Hispanic or Latino origin groups, and group quarters for the total population. Summary File 2 contains data tables on population and housing characteristics as reported by housing unit.

Researchers at NYU Langone Health can find guidance for the use and analysis of Census Bureau data on the Population Health Data Hub (listed under "Other Resources"), which is accessible only through the intranet portal with a valid Kerberos ID (KID).

Annual Resident Population Estimates by Age Group, Sex, Race, and Hispanic Origin: April 1, 2010 to July 1, 2018 // Source: U.S. Census Bureau, Population Division // The contents of this file are released on a rolling basis from December through June. // Note: 'In combination' means in combination with one or more other races. The sum of the five race-in-combination groups adds to more than the total population because individuals may report more than one race. Hispanic origin is considered an ethnicity, not a race. Hispanics may be of any race. Responses of 'Some Other Race' from the 2010 Census are modified. This results in differences between the population for specific race categories shown for the 2010 Census population in this file versus those in the original 2010 Census data. For more information, see https://www2.census.gov/programs-surveys/popest/technical-documentation/methodology/modified-race-summary-file-method/mrsf2010.pdf. // The estimates are based on the 2010 Census and reflect changes to the April 1, 2010 population due to the Count Question Resolution program and geographic program revisions. // For detailed information about the methods used to create the population estimates, see https://www.census.gov/programs-surveys/popest/technical-documentation/methodology.html. // Each year, the Census Bureau's Population Estimates Program (PEP) utilizes current data on births, deaths, and migration to calculate population change since the most recent decennial census, and produces a time series of estimates of population. The annual time series of estimates begins with the most recent decennial census data and extends to the vintage year. The vintage year (e.g., V2017) refers to the final year of the time series. The reference date for all estimates is July 1, unless otherwise specified. With each new issue of estimates, the Census Bureau revises estimates for years back to the last census. As each vintage of estimates includes all years since the most recent decennial census, the latest vintage of data available supersedes all previously produced estimates for those dates. The Population Estimates Program provides additional information including historical and intercensal estimates, evaluation estimates, demographic analysis, and research papers on its website: https://www.census.gov/programs-surveys/popest.html.

U.S. Census Populated Place Areas represents the 2020 U.S. Census populated place areas of the United States that include incorporated places, cities, and census designated places identified by the U.S. Census Bureau.This layer is updated annually. The geography is sourced from U.S. Census Bureau 2020 TIGER FGDB (National Sub-State) and edited using TIGER Hydrography to add a detailed coastline for cartographic purposes. Attribute fields include 2020 total population from the U.S. Census Public Law 94 data. The Population Class field values represent population ranges as follows:Population from 0 - 249Population from 250 - 499Population from 500 - 999Population from 1,000 - 2,499Population from 2,500 - 9,999Population from 10,000 - 49,999Population from 50,000 - 99,999Population from 100,000 - 249,999Population from 250,000 - 499,999Population 500,000 and overThis ready-to-use layer can be used in ArcGIS Pro and in ArcGIS Online and its configurable apps, dashboards, StoryMaps, custom apps, and mobile apps. The data can also be exported for offline workflows. Cite the 'U.S. Census Bureau' when using this data.

Link to the Open Data site for the United States Census Bureau.

Census Current (2022) Legal and Statistical Entities Web Map Service; January 1, 2022 vintage.

Incorporated Places are those reported to the Census Bureau as legally in existence as of the latest Boundary and Annexation Survey (BAS), under the laws of their respective states. An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division, which generally is created to provide services or administer an area without regard, necessarily, to population. Places always are within a single state or equivalent entity, but may extend across county and county subdivision boundaries. An incorporated place usually is a city, town, village, or borough but can have other legal descriptions. For Census Bureau data tabulation and presentation purposes, incorporated places exclude:

1) The boroughs in Alaska (treated as statistical equivalents of counties).

2) Towns in the New England states, New York, and Wisconsin (treated as MCDs).

3) The boroughs in New York (treated as MCDs).

Links to Audit Reports conducted on the U.S. Census

U.S. Census Bureau QuickFacts statistics for Jacksonville city, Florida. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

Graph and download economic data for Homeownership Rate in the United States (RHORUSQ156N) from Q1 1965 to Q1 2025 about homeownership, housing, rate, and USA.

Graph and download economic data for Resident Population in the West South Central Census Division (CWSCPOP) from 1900 to 2024 about West South Central Census Division, residents, population, and USA.

This layer presents the USA 2020, U.S Census county/parish boundaries of the United States in the 50 states and the District of Columbia. Attributes include total population.

Monthly Intercensal Estimates of the Resident plus Armed Forces Overseas Population by Single Year of Age and Sex: April 1, 1990 to April 1, 2000 // Source: U.S. Census Bureau, Population Division // For detailed information about the methods used to create the intercensal population estimates, see https://www.census.gov/popest/methodology/intercensal_nat_meth.pdf. // The Census Bureau's Population Estimates Program produces intercensal estimates each decade by adjusting the existing time series of postcensal estimates for a decade to smooth the transition from one decennial census count to the next. They differ from the postcensal estimates that are released annually because they rely on a formula that redistributes the difference between the April 1 postcensal estimate and April 1 census count for the end of the decade across the estimates for that decade. Meanwhile, the postcensal estimates incorporate current data on births, deaths, and migration to produce each new vintage of estimates, and to revise estimates for years back to the last census. The Population Estimates Program provides additional information including historical and postcensal estimates, evaluation estimates, demographic analysis, and research papers on its website: https://www.census.gov/popest/index.html.

2020 Census Tracts from the US Census for New York City. These boundary files are derived from the US Census Bureau's TIGER data products and have been geographically modified to fit the New York City base map. All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

This dataset contains information about the demographics of all US cities and census-designated places with a population greater or equal to 65,000. This data comes from the US Census Bureau's 2015 American Community Survey. This product uses the Census Bureau Data API but is not endorsed or certified by the Census Bureau.

This data collection contains information compiled from the questions asked of a sample of persons and housing units enumerated in Census 2000. Population items include sex, age, race, Hispanic or Latino origin, type of living quarters (household/group quarters), urban/rural status, household relationship, marital status, grandparents as caregivers, language and ability to speak English, ancestry, place of birth, citizenship status and year of entry into the United States, migration, place of work, journey to work (commuting), school enrollment and educational attainment, veteran status, disability, employment status, occupation and industry, class of worker, income, and poverty status. Housing items include vacancy status, tenure (owner/renter), number of rooms, number of bedrooms, year moved into unit, household size, occupants per room, number of units in structure, year structure was built, heating fuel, telephone service, plumbing and kitchen facilities, vehicles available, value of home, and monthly rent. With subject content identical to that provided in Summary File 3, the information is presented in 813 tables that are tabulated for every geographic unit represented in the data. There is one variable per table cell, plus additional variables with geographic information. The data cover more than a dozen geographic levels of observation (known as "summary levels" in the Census Bureau's nomenclature) based on the 108th Congressional Districts, e.g., the 108th Congressional Districts, themselves, Census tracts within the 108th Congressional Districts, and county subdivisions within the 108th Congressional Districts. There are 77 data files for each state, the District of Columbia, and Puerto Rico. The collection is supplied in 54 ZIP archives. There is a separate ZIP file for each state, the District of Columbia, and Puerto Rico, and for the convenience of those who need all of the data, a separate ZIP archive with all 4,004 data files. The codebook and other documentation are located in the last ZIP archive.

Annual Resident Population Estimates, Estimated Components of Resident Population Change, and Rates of the Components of Resident Population Change for States and Counties: April 1, 2010 to July 1, 2013 // File: 7/1/2013 County Population Estimates // Source: U.S. Census Bureau, Population Division // Release Date: March 2014 // Note: Total population change includes a residual. This residual represents the change in population that cannot be attributed to any specific demographic component. See Population Estimates Terms and Definitions at http://www.census.gov/popest/about/terms.html. // Net international migration in the United States includes the international migration of both native and foreign-born populations. Specifically, it includes: (a) the net international migration of the foreign born, (b) the net migration between the United States and Puerto Rico, (c) the net migration of natives to and from the United States, and (d) the net movement of the Armed Forces population between the United States and overseas. // The estimates are based on the 2010 Census and reflect changes to the April 1, 2010 population due to the Count Question Resolution program and geographic program revisions. See Geographic Terms and Definitions at http://www.census.gov/popest/about/geo/terms.html for a list of the states that are included in each region and division. All geographic boundaries for these population estimates are as of January 1, 2013. // For detailed information about the methods used to create the population estimates, see http://www.census.gov/popest/methodology/index.html. // Each year, the Census Bureau's Population Estimates Program (PEP) utilizes current data on births, deaths, and migration to calculate population change since the most recent decennial census, and produces a time series of estimates of population. The annual time series of estimates begins with the most recent decennial census data and extends to the vintage year. The vintage year (e.g., V2013) refers to the final year of the time series. The reference date for all estimates is July 1, unless otherwise specified. With each new issue of estimates, the Census Bureau revises estimates for years back to the last census. As each vintage of estimates includes all years since the most recent decennial census, the latest vintage of data available supersedes all previously produced estimates for those dates. The Population Estimates Program provides additional information including historical and intercensal estimates, evaluation estimates, demographic analysis, and research papers on its website: http://www.census.gov/popest/index.html.

This dataset presents statistics on: the number of establishments; sales, value of shipments, or revenue; annual payroll; and number of employees whose NAICS classification has changed between the current and the previous economic censuses. Data are shown for 6-digit current economic census NAICS industries and their 8-digit previous economic census NAICS components for the U.S. Includes only establishments of firms with paid employees.

Abstract (en): The U.S. Census counts every resident in the United States. It is mandated by Article I, Section 2 of the Constitution and takes place every 10 years. The basic purpose of the census is apportionment and redistricting. "Apportionment" is the process of dividing the 435 memberships, or seats, in the House of Representatives among the 50 states based on the population figures collected during the decennial census. "Redistricting" is the process of geographically defining state legislative districts. The census data allow state officials to realign congressional and state legislative districts in their states, taking into account population shifts since the last census and assuring equal representation for their constituents in compliance with the “one-person, one-vote” principle of the 1965 Voting Rights Act. The resident population of the United States