High Quality Successional and Native Forests of Tallahassee and Leon County, Florida. This feature class was created as part of the Environmentally Sensitive Areas (ESA) Mapping Project.The Native and High Quality Successional Forests were mapped in GIS as part of a larger Environmentally Sensitive Areas (ESA) mapping project, which was a collaborative effort between the city and county growth management departments, the planning department and TLCGIS. This project was driven out of a need for better data that was standardized county-wide to support environmental resource planning, protection and regulation, etc. It was also needed to support public works and emergency management. Additionally, the Tallahassee-Leon County Comprehensive Plan Conservation Element Objectives and Policies required compilation and maintenance of maps of conservation and preservation features, effective 1990--the same year that the GIS Interlocal office was created. Prior to this in 1988, the original ESA data layers were mapped by environmental professionals and stormwater engineers working in what was then called the Leon County Department of Public Works. The data was drawn onto USGS quad maps (base) using mylar overlays (scale 24,000)--drainage basins were also mapped. It was supported by a Department of Community Affairs grant, and there was assistance from the FSU Geography Department. The Native and HQS Forests were identified using DOT Vegetation Inventory Maps, USFS Soils and Vegetation maps, some aerial photo review, and ground truthing.In 1996 a proposal was brought to the GIS Executive Committee by the departments as an ESA Remap Project that would map the layers (also Greenways) at larger scales of 1,200 and 2,400 using the new GIS base map. The project was funded by the TLCGIS. The layers were mapped by OPS environmental/biology students and graduates with oversight by the departments.Native and HQS Forests originally mapped on the quad maps were then heads up digitized into the GIS using base map data and two sets of digital aerial photos from '94 & '96. Hard copy aerials from '37 and '76 were also used for comparison. In the southeastern US mixed hardwood/beech-magnolia forests have a fairly distinct spectral signature on the false color infrared imagery which staff learned and were trained to recognize, with ground truthing where possible (property owners were called for access). The upland pine/longleaf and pine oak hickory signatures were not as easy to identify. The goal of the ESA Remap was to identify forests that had been continually forested since at least '37 (less so for longleaf forests where bulk of the diversity is in the groundcover). The soil and contour layers, with the aerials were used to find additional areas that hadn't been previously mapped. So, essentially it was a process of identifying a specific signature and also the environmental conditions (soils, slope, aspect, topography) that would have supported or allowed a forest type to have been protected throughout history. For example, beech-magnolia forests are often found on steep slopes that were historically difficult to access for logging or around wetland/floodplain areas that would have potentially limited logging due to saturated soils. Florida Natural Areas Inventory Element Occurrence data and Florida Fish and Wildlife Conservation Commission Closing the Gaps data were also used.
A vector tile package basemap of Tallahassee and Leon County, Florida. This vector tile package is a street map (basemap) that can be downloaded and deployed locally for use in ArcGIS Pro. This package is updated monthly. Be sure to check back for updates!
United States National Grid 100 meter sell size for Tallahassee and Leon County Florida. This layer is used in public safety and search and rescue operations applications.
This Impervious Surface feature layer is comprised of features identifiable in the orthoimagery collected for Leon County, FL in January, 2021. TLCGIS regularly uses digital orthophotos and planimetric/hydrographic/topographic data to support regulatory functions, land management and acquisition, planning, engineering and habitat restoration projects.This dataset is part of a regularly scheduled update of LiDAR and digital orthophotography products. The dataset was created from source imagery acquired by a Leica ADS100 multispectral aerial mapping camera from January 5-18, 2021. There are 17 categories of impervious features in the Impervious Surfaces layer:BuildingAirportLandscape IslandPaved DrivewayPaved IslandPaved ParkingPaved RoadPaved Road Over BridgeRuinSidewalkSidewalk Over SidewalkTennis CourtUnfinished BuildingUnpaved DrivewayUnpaved ParkingUnpaved RoadWaterbody
This downloadable zip file contains an ESRI File Geodatabase that is compatible with most versions of ArcGIS Pro, ArcMap, and AutoCAD Map 3D or Civil 3D. To view the geodatabase’s contents, please download the zip file to a local directory and extract its contents.This content in this file geodatabase consist of planimetric layers identifiable in the orthoimagery collected for Leon County, FL in January, 2021. TLCGIS regularly uses digital orthophotos and planimetric/hydrographic/topographic data to support regulatory functions, land management and acquisition, planning, engineering and habitat restoration projects.This dataset is part of a regularly scheduled update of LiDAR and digital orthophotography products. The dataset was created from source imagery acquired by a Leica ADS100 multispectral aerial mapping camera from January 5-18, 2021. Planimetric Layers:BridgesBuildings - Buildings feature class contains all buildings 100 square feet or greater that are visible in the 2021 orthoimagery. Hydro LinesHydro PolygonsImperv - Impervious Surface includes Airport, Building, Landscape Island, Paved Driveway, Paved Island, Paved Parking, Paved Road, Paved Road Over Bridge, Ruin, Sidewalk, Sidewalk Over Sidewalk, Tennis Court, Unfinished Building, Unpaved Driveway, Unpaved Parking, Unpaved Road, and WaterbodyImpervHydroProjectBoundaryRdedge - Road edges were extracted from the impervious surfaces data from 2021 using paved roads, unpaved roads, paved driveways, and unpaved driveways.
United States National Grid 1 KM cell size for Tallahassee and Leon County Florida. This layer is used in public safety and search and rescue operations applications.
This line feature layer displays the official boundary line for Leon County, Florida as maintained by the Leon County Property Appraiser's Office. This layer is updated on an as needed basis.
This feature layer, often referred to as PARNAL, displays tax parcel boundaries for Tallahassee and Leon County, Florida as provided by the Leon County Property Appraisers Office. NAL refers to the Name, Address, and Legal Description fields that are included as part of this layer's attribute information. This layer is extracted from LCPAO's production database and refreshed every weekday.Interested in downloading parcel data from the Leon County Property Appraiser? Leon County Property Appraiser's Official Download Site
This layer shows Fire Stations in Tallahassee and Leon County, Florida. The content in the layer is maintained by staff at Leon County - Tallahassee Consolidated Dispatch Agency.
Environmentally sensitive areas mapping NHW (Normal High Water) for waterbodies in Tallahassee and Leon County, Florida. These features are updated with imagery, digital elevation models (Lidar), and field observations on and as needed basis. While some waterbody features like stormwater ponds are not considered environmentally sensative, they have been inincluded in this set of features as reference and because they do participate in the drainage sytems of Tallahassee and Leon County. Methodology: The initial data source was the original waterbody data from the 1988 ESA maps. Additionally, Hydro features Type=215 from 2009, 2012, and 2015 Landbase datasets are added. The newly added waterbodies are examined to determine if they normally hold water by comparing aerial photography. Sources used as reference for the delineation process are the 2009 DEM, 2012 DEM, and the 2015 DEM, Leon County Soil Survey, National Wetlands Inventory (NWI) features which have Water1 attribute classifications of F, G, or H, 1996 Additional data sources include , USGS Digital Ortho Quarter Quadrangle imagery, orthoimagery from 1996, 2009, 2012, and 2015, permit files, and field verification. All polygon features are attributed and assigned a confidence interval. 4=walked boundary; 3=field verified, 2=sources agree, 1=sources disagree. Confidence intervals can change as a result of further investigation. Supplemental Information Waterbody features were obtained through remote sensing and topographic analysis. Site specific study needed to verify the normal high water line.
Leon County Boundary Feature Layer (Poly). This feature layer displays the administrative boundary of Leon County, Florida as a polygon. It is maintained by staff at the Leon County Property Appraiser's Office. It is updated on an as needed basis.
The polygon feature layer displays middle school zones for Tallahassee and Leon County, Florida. This layer is maintained by TLCGIS in coordination with Leon County Schools.
This feature layer displays Future Land Use (FUTLU) district boundary polygons for the City of Tallahassee and Leon County, Florida. The Future Land Use layer is maintained by Tallahassee Leon County Planning Department (TLCPD). For more information about this layer visit the TLCPD Website or call (850) 891-6400.
This layer is hand digitized polygon feature class depicting approved Limited Use Site Plans (LUSP) of Tallahassee and Leon County FL. It was created by the Tallahassee Leon County Planning Department. The LUSP is no longer part of the land use approval process. However, this layer will be updated as site plans are updated or rescinded. This layer is edited by on an "as needed" basis by staff at Tallahassee - Leon County Planning Department and/or City of Tallahassee Growth Management. This feature layer is a publicly shared view of a secured editing layer.
This data set is intended to provide members of the Tallahassee/Leon County GIS Interlocal community with layer content to use in their maps, projects and business processes. It identifies land areas that are known to have had changes that may be of concern when considering future development. The Department of Planning Land Management & Community Enhancement (PLACE) of Leon County Florida, while collaborating with the Leon County Development Support and Environmental Management (LCDSEM) and Tallahassee - Leon County GIS (TLCGIS), has been tasked with the gathering and collating all available disturbed land locations. The data is derived from a DEP point layer to identify locations of landfills in addition to mandatory Non-Phosphate site locations which were initially based on a parcel cadastral data set. The polygon-based feature class was digitized to reflect the disturbed area on parcels by reviewing aerial photography from various years while comparing the current digital elevation model (DEM).
High School Zones for Leon County Florida as defined by the Leon County School Board.
This Bridges feature layer is comprised of features identifiable in the orthoimagery collected for Leon County, FL in January, 2021. TLCGIS regularly uses digital orthophotos and planimetric/hydrographic/topographic data to support regulatory functions, land management and acquisition, planning, engineering and habitat restoration projects. This dataset is part of a regularly scheduled update of LiDAR and digital orthophotography products. The dataset was created from source imagery acquired by a Leica ADS100 multispectral aerial mapping camera from January 5-18, 2021.
This point feature layer displays public and private school locations in Leon County, Florida
This polygon feature layer displays significant landmarks in Tallahassee and Leon County, Florida. This layer is used for cartographic effect as labeling and shading in TLCGIS's basemap layers and label overlays. The labels extended by this layer are intended to provide a visual reference that assists our users with spatial context as they view TLCGIS maps. This layer is also provided to ESRI in a standardized schema at regular intervals as part of the Community Maps Program. Accordingly, these features and labels also appear in ESRI basemaps. This layer is maintained by TLCGIS staff and is updated on an as needed basis.Landmark Categories:Amusement ParkCemeteryEducational InstitutionEmergency ResponseGolf CourseGovernment CenterHospitalIndustrial AreaLaw EnforcementLibraryMilitaryPrisonPublic AttractionsRetail CenterStadiumTransportationZoos
1990 black and white aerial imagery for Tallahassee and Leon County, Florida. TLCGIS regularly uses digital orthophotos along with planimetric, hydrographic, and topographic data to support regulatory functions, land management and acquisition, planning, engineering and habitat restoration projects. However, this imagery is not ortho-rectified. The images displayed in this service were manually scanned from hard copy then geo-referenced, edge matched, and color balanced by TLCGIS staff. While TLCGIS staff georeferenced the images, we can make no claims as to the accuracy, uniformity of scale or lack of distortion. This imagery layer was published as a dynamic service from an ESRI mosaic data set. This imagery layer was published as a dynamic service from an ESRI mosaic data set.
High Quality Successional and Native Forests of Tallahassee and Leon County, Florida. This feature class was created as part of the Environmentally Sensitive Areas (ESA) Mapping Project.The Native and High Quality Successional Forests were mapped in GIS as part of a larger Environmentally Sensitive Areas (ESA) mapping project, which was a collaborative effort between the city and county growth management departments, the planning department and TLCGIS. This project was driven out of a need for better data that was standardized county-wide to support environmental resource planning, protection and regulation, etc. It was also needed to support public works and emergency management. Additionally, the Tallahassee-Leon County Comprehensive Plan Conservation Element Objectives and Policies required compilation and maintenance of maps of conservation and preservation features, effective 1990--the same year that the GIS Interlocal office was created. Prior to this in 1988, the original ESA data layers were mapped by environmental professionals and stormwater engineers working in what was then called the Leon County Department of Public Works. The data was drawn onto USGS quad maps (base) using mylar overlays (scale 24,000)--drainage basins were also mapped. It was supported by a Department of Community Affairs grant, and there was assistance from the FSU Geography Department. The Native and HQS Forests were identified using DOT Vegetation Inventory Maps, USFS Soils and Vegetation maps, some aerial photo review, and ground truthing.In 1996 a proposal was brought to the GIS Executive Committee by the departments as an ESA Remap Project that would map the layers (also Greenways) at larger scales of 1,200 and 2,400 using the new GIS base map. The project was funded by the TLCGIS. The layers were mapped by OPS environmental/biology students and graduates with oversight by the departments.Native and HQS Forests originally mapped on the quad maps were then heads up digitized into the GIS using base map data and two sets of digital aerial photos from '94 & '96. Hard copy aerials from '37 and '76 were also used for comparison. In the southeastern US mixed hardwood/beech-magnolia forests have a fairly distinct spectral signature on the false color infrared imagery which staff learned and were trained to recognize, with ground truthing where possible (property owners were called for access). The upland pine/longleaf and pine oak hickory signatures were not as easy to identify. The goal of the ESA Remap was to identify forests that had been continually forested since at least '37 (less so for longleaf forests where bulk of the diversity is in the groundcover). The soil and contour layers, with the aerials were used to find additional areas that hadn't been previously mapped. So, essentially it was a process of identifying a specific signature and also the environmental conditions (soils, slope, aspect, topography) that would have supported or allowed a forest type to have been protected throughout history. For example, beech-magnolia forests are often found on steep slopes that were historically difficult to access for logging or around wetland/floodplain areas that would have potentially limited logging due to saturated soils. Florida Natural Areas Inventory Element Occurrence data and Florida Fish and Wildlife Conservation Commission Closing the Gaps data were also used.