Geospatial data about Licking County, Ohio Addresses. Export to CAD, GIS, PDF, CSV and access via API.

Download .zipThis theme shows zoning for the unincorporated areas of Licking County in 1988 as provided by the Licking County Planning Commission.

This coverage was digitized from zoning drafted onto USGS quadrangle maps utilizing a run length encoding technique sampling along horizontal lines which represent the midline of cells with a height of 250 feet . The measurement increment along these horizontal lines was one decafoot (10 feet) the quadrangle files were then merged into a county file which was subsequently converted to ARC / Info format.

The user should bear in mind that this coverage is only an approximation of the zoning as drafted.

Additional details on the digitizing process are available on request.

Original coverage data was converted from the .e00 file to a more standard ESRI shapefile(s) in November 2014.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesReal Estate & Land ManagementReal Estate and Lands Management2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThe C, D Law Coal Permit Maps county coverage sets were developed using the original mine maps for over 2500 coal mining and reclamation permits issued under Ohio law and finalized (i.e. operations completed) between 1975 and December 2002.

Ohio started issuing coal mining licenses in the 1940s. The earliest license and permit requirements were minimal and did not include submittal of a map or other delineation of the mined area. Significant changes to legal requirements are reflected by the alphabetical designation of each subsequent law revision, i.e., earlier A-law permits (circa 1966) through contemporary D-law permits. The ODNR-Division of Mineral Resources Management (DMRM) has attempted to create as complete a database as possible from available archive records, however, research has identified missing permit files. Thus, this GIS data is known to be incomplete due to the loss of archival records.

The C and D law permit maps were scanned at a density of 200 dots per inch (dpi). The scanned image was then heads-up digitized using Microstation computer aided design software (CAD) to create design files grouped by county location. Data captured within the design file includes permit boundary, affected boundary, test hole locations, and associated attributes. The design file was then "placed-to-ground" using ODNR Division of Geological Survey's "ODNR Land Sub-division Background Design Files" NAD83 State Plane coverages and DOQQ aerial images obtained through the Ohio Geographically Referenced Information Program (OGRIP)/Ohio Department of Administrative Services. The design file was then converted to ARC/INFO coverage and projected to State Plane Ohio Coordinates, NAD83:

Projected coordinate system name: NAD_1983_StatePlane_Ohio_South_FIPS_3402_Feet

Geographic coordinate system name: GCS_North_American_1983

A complete county coverage set consists of five data files for the permit area, affected area, and test hole locations. For example, the coverage for Athens County includes:

athens_c_permitted (Athens County, C-permit area polygons) athens_c_affected (Athens County, C-permit affected area polygons) athens_d_permitted (Athens County, D- permit area polygons) athens_d_affected (Athens County, D-permit affected area polygons) athens_testholes (Athens County, Test Hole points)

In addition to the ArcView shape files in the county data sets, the scanned TIF images for source documents are available at DMRM. The scanned mine map depicts information about the operations conducted, environmental resources, and extracted coal resources. If more detailed information is desired, the available archival record for each captured permit can be accessed at either the State Archives at the Ohio Historical Society or the ODNR-DMRM central office.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Mineral Resources ManagementAbandoned Mine Land Program2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThe B Law Coal Permit Maps county coverage sets were developed using the original mine maps for coal mining and reclamation permits issued under Ohio law from 1973 through 1976. Approximately 1285 B-Permits were issued during this time period, however, only approximately 414 records could be located and captured at this time. The Division of Mineral Resources Management will continue to search for missing B permit archival records as resources allow; additional B permit data may be added to this existing coverage in the future.

Ohio started issuing coal mining licenses in the 1940s. The earliest license and permit requirements were minimal and sometimes did not include submittal of a map or other delineation of the mined area. Significant changes to legal requirements are reflected by the alphabetical designation of each subsequent law revision, i.e., earlier A-law permits (circa 1966) through contemporary D-law permits. The ODNR-Division of Mineral Resources Management (DMRM) has attempted to create as complete a database as possible from available archive records, however, research has identified missing permit files. Thus, this GIS data is known to be incomplete due to the loss of archival records.

The B law permit maps were scanned at a density of 200 dots per inch (dpi). The scanned image was then heads-up digitized using Microstation computer aided design software (CAD) to create design files grouped by county location. Data captured within the design file includes permit boundary, affected boundary, test hole locations, and associated attributes. The design file was then "placed-to-ground" using ODNR Division of Geological Survey's "ODNR Land Subdivision Background Design Files" NAD83 State Plane coverages and DOQQ aerial images obtained through the Ohio Geographically Referenced Information Program (OGRIP)/Ohio Department of Administrative Services. The design file was then converted to ARC/INFO coverage and projected to State Plane Ohio Coordinates, NAD83:

Projected coordinate system name: NAD_1983_StatePlane_Ohio_South_FIPS_3402_Feet

Geographic coordinate system name: GCS_North_American_1983

A complete county coverage set consists of three data files for the permit area, affected area, and test hole locations. For example, the coverage for Belmont County includes:

belmont_b_permitted (Belmont County, B-permit area polygons) belmont_b _affected (Belmont County, B-permit affected area polygons) belmont_testholes_b (Belmont County, Test Hole points)

In addition to the ArcView shape files in the county data sets, the scanned TIF images for source documents are available at DMRM. The scanned mine map depicts information about the operations conducted, environmental resources, and extracted coal resources. If more detailed information is desired, the available archival record for each captured permit can be accessed at either the State Archives at the Ohio Historical Society or the ODNR-DMRM central office.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Mineral Resources ManagementAbandoned Mine Land Program2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipA soil mapping unit designates a specific type of soil which has unique characteristics including texture, slope, and erosion class.

This coverage was developed from a recompilation of the original soil survey onto a mylar USGS quadrangle based overlay at 1:24000. The recompilation was done by the ODNR, Division of Soil and Water Conservation. The recompiled soils were scanned by a commercial data conversion firm at a density of 500 dots per inch and then converted to ARC Grid format. The GRID files for each quadrangle were then converted to ARC/INFO coverages and editted through various software routines and manual heads-up digitizing. Quadrangle coverages were converted into state plane coordinates NAD 27, projected to UTM, edgematched, and then joined into a final county coverage for use by the USDA, Natural Resources Conservation Service for compliance with SSURGO standards. The coverage was reprojected to State Plane Coordinates, NAD 27 for consistency with other county coverages maintained by the state. SSURGO review has not yet been completed on this coverage. During the review process some changes in soil names and/or boundaries may be made.

Original coverage data was converted from the .e00 file to a more standard ESRI shapefile(s) in November 2014.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesReal Estate & Land ManagementReal Estate and Lands Management2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipMaps and data associated with oil-and-gas wells represent one of the largest datasets at the Ohio Department of Natural Resources. This GIS data layer contains all the locatable oil-and-gas wells in Ohio. The feature is derived from coordinates obtained from the Division of Oil and Gas Resources Management (DOGRM) oil and gas well database – Risk Based Data Management System (RBDMS). The RBDMS database has a long history and is a comprehensive collection of well data from historic pre-1980 paper well records (digitized by the Division of Geological Survey (DGS)) to post-1980 DOGRM database solutions.Since 1860, it is estimated that more than 267,000 oil-and-gas wells have been drilled in Ohio. The compressed file also includes a feature used to connect the surface location to the bottom location of a well that has been drilled directionally or horizontally. This feature is NOT the actual wellbore path, it is simply a graphical representation indicating the relationship between the two well points.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesDivision of Oil & Gas ResourcesOil and Gas Resources Management2045 Morse Road Bldg F-2Columbus, OH, 43229-6693Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThe Ohio Wetlands Inventory is based on analysis of satellite data by Bruce R. Motsch and Gary M. Schaal and is intended solely as an indicator of wetland sites for which field review should be conducted. The satellite data reflect conditions during the specific year and season the data was acquired and all wetlands may not be indicated. Statistics generated from the inventory are intended solely as an approximation.

The Ohio Wetlands Inventory for Licking County was produced from April 1987 Landsat Thematic mapper data (cell size 30 meters by 30 meters) using ERDAS Image processing software. The raster data has been converted to ARC/INFO format and exported to an interchange file.

The data was originally georeferenced to UTM zone 17 coordinates NAD 27 and is also available in this coordinate system in ERDAS Imagine format.

The class of woods on hydric soils, wet meadow and farmed wetland fall on hydric soils when digital soils data is available for the county.

Original coverage data was converted from the .e00 file to a more standard ESRI shapefile(s) in November 2014.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesReal Estate & Land ManagementReal Estate and Lands Management2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipGroundwater Vulnerability is an evaluatation of an area’s vulnerability to groundwater contamination based upon its hydrogeologic, topographic, and soil media characteristics.Contact Information:Geological Survey, Customer ServiceOhio Department of Natural ResourcesDivision of Geological SurveyGeologic Records2045 Morse RoadColumbus, OH, 43229-6693Telephone: 614-265-6576Email: geo.survey@dnr.ohio.gov

Download .zipThese data were derived from multiple sources, one of which was the USGS DLG data which was captured at 1:24,000-scale. The accuracy for DLG data is ± 40 feet. Although the USGS does not claim legal responsibility for the accuracy of these data.These files were obtained from the GIS Support Center, Ohio Department of Administrative Services and were originally prepared by the Ohio State University Center for Mapping in cooperation with the United States Geological Survey with additional funding from several state agencies and other groups. These files were augmented in a few instances with hand digitizing where small missing line segments were found. Originally the Lake Erie shoreline and islands in Lake Erie were added from the Hydrography layer (hy). At the time, the quadrangles used varied over a wide rangle of years this line does not represent a particular water level and is for illustrative purposes only. For example there is a wide offset between the shoreline on the Metzger Marsh Quadrangle and that of the Oak Harbor Quadrangle. This distance is so large that no attempt was made to edgematch the two quadrangles. The line connecting the two shorelines represents the quadrangle boundary. For the purposes of this map Sandusky Bay and Muddy Creek Bay were included as a part of Lake Erie. The Lake Erie shoreline is not meant to represent any Lake Erie shoreline which may be used for regulatory puposes. This has since been modified to be more accurate and inline with the NOAA project that mapped the bathymetry of the Great Lakes. The boundaries were modified to better match these data. An updated boundary for Fairfield-Licking-Perry Counties within Buckeye Lake was included by digitizing the boundary from a more recently updated quadrangle map.

Conversion from the dlg format to ArcInfo was accomplished using ArcInfo software in conjuction with an AML program to adjust the quadrangles so that their corners fall on the exact coordinates of the quadrangle corners. Due to the way in wihich coordinates are stored in the dlg's there is some variation in the quadrangle corner coordinates.

Since 200; additional edits to these data were made in 2002 by ODNR staff through the creation of the Public Lands Survey digitization project.

Further edits were made in 2012 in conjunction with a BLM project to establish cadastral standards.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesOffice of Information TechnologyGIS Records2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

Download .zipThis theme shows the county boundaries for the State of Ohio. Boundaries were assembled from individual USGS Quadrangle digital line graph files (dlg) of the boundary layer (bd). These files were obtained from the GIS Support Center, Ohio Department of Administrative Services and were originally prepared by the Ohio State University Center for Mapping in cooperation with the United States Geological Survey with additional funding from several state agencies and other groups. These files were augmented in a few instances with hand digitizing where small missing line segments were found. The Lake Erie shoreline and islands in Lake Erie were added from the Hydrography layer (hy). It should be noted that because the quadrangles used varied over a wide rangle of years this line does not represent a particular water level and is for illustrative purposes only. For example there is a wide offset between the shoreline on the Metzger Marsh Quadrangle and that of the Oak Harbor Quadrangle. This distance is so large that no attempt was made to edgematch the two quadrangles. The line connecting the two shorelines represents the quadrangle boundary. For the purposes of this map Sandusky Bay and Muddy Creek Bay were included as a part of Lake Erie. The Lake Erie shoreline is not meant to represent any Lake Erie shoreline which may be used for regulatory puposes. An updated boundary for Fairfield-Licking-Perry Counties within Buckeye Lake was included by digitizing the boundary from a more recently updated quadrangle map. Conversion from the dlg format to ArcInfo was accomplished using ArcInfo software in conjuction with an AML program to adjust the quadrangles so that their corners fall on the exact coordinates of the quadrangle corners. Due to the way in wihich coordinates are stored in the dlg's there is some variation in the quadrangle corner coordinates.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesOffice of Information TechnologyGIS Records2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov