Vector polygon map data of property parcels from Los Angeles County, California containing 2,405,987 features.

Property parcel GIS map data consists of detailed information about individual land parcels, including their boundaries, ownership details, and geographic coordinates.

Property parcel data can be used to analyze and visualize land-related information for purposes such as real estate assessment, urban planning, or environmental management.

Available for viewing and sharing as a map in a Koordinates map viewer. This data is also available for export to DWG for CAD, PDF, KML, CSV, and GIS data formats, including Shapefile, MapInfo, and Geodatabase.

This website provides a limited number of Substructure Maps in “pdf” format via GIS polygons representing grids containing URL links. Across various areas of Los Angeles County, paper maps were created by Public Works (PW) and its predecessor Departments to show underground utilities such as cable TV, gas, oil, and telephone lines.

Though most of these maps are no longer updated, they can be useful as a research resource. Every reasonable effort has been made to assure the accuracy of this data and the maps referenced. Some cities may provide substructure information for the areas not covered by these grids. Additional and more accurate substructure data and information may also be obtained through the utility companies. Before digging, it is strongly advised to contact the Underground Service Alert (DigAlert Express) at www.digalert.org/digexpress.html or by calling 811.

Please note that California State Law Says, You Must Contact DigAlert!

The County of Los Angeles makes no warranty, representation, or guarantee as to the content, sequence, accuracy, timeliness, or completeness of any of the data provided herein or of any maps referenced. Los Angeles County Public Works recommends that all utility research be conducted under the supervision of a licensed civil engineer.

This website provides a limited number of Substructure Maps in “pdf” format via GIS polygons representing grids containing URL links. Across various areas of Los Angeles County, paper maps were created by Public Works (PW) and its predecessor Departments to show underground utilities such as cable TV, gas, oil, and telephone lines.

Though most of these maps are no longer updated, they can be useful as a research resource. Every reasonable effort has been made to assure the accuracy of this data and the maps referenced. Some cities may provide substructure information for the areas not covered by these grids. Additional and more accurate substructure data and information may also be obtained through the utility companies. Before digging, it is strongly advised to contact the Underground Service Alert (DigAlert Express) at www.digalert.org/digexpress.html or by calling 811.

Please note that California State Law Says, You Must Contact DigAlert!

The County of Los Angeles makes no warranty, representation, or guarantee as to the content, sequence, accuracy, timeliness, or completeness of any of the data provided herein or of any maps referenced. Los Angeles County Public Works recommends that all utility research be conducted under the supervision of a licensed civil engineer.

Geospatial data about Los Angeles County Streams and Rivers. Export to CAD, GIS, PDF, CSV and access via API.

Geospatial data about Los Angeles County Railroads. Export to CAD, GIS, PDF, CSV and access via API.

Polygon vector map data covering boundaries for the City of Los Angeles containing 4 features.

Boundary GIS (Geographic Information System) data is spatial information that delineates the geographic boundaries of specific geographic features. This data typically includes polygons representing the outlines of these features, along with attributes such as names, codes, and other relevant information.

Boundary GIS data is used for a variety of purposes across multiple industries, including urban planning, environmental management, public health, transportation, and business analysis.

Available for viewing and sharing as a map in a Koordinates map viewer. This data is also available for export to DWG for CAD, PDF, KML, CSV, and GIS data formats, including Shapefile, MapInfo, and Geodatabase.

​

This layer contains information for locating past and present legal city boundaries within Los Angeles County. The Los Angeles County Department of Public Works provides the most current shapefiles representing city annexations and city boundaries on the Los Angeles County GIS Data Portal. True, legal boundaries are only determined on the ground by surveyors licensed in the State of California. Numerous records are freely available at the Land Records Information website, hosted by the Department of Public Works.Principal Attributes:NO: The row number in the attribute table of the PDF Annexation Maps. (See Below)

ANNEX_No: These values are only used for the City of Los Angeles and Long Beach.

NAME: The official annexation name.

TYPE: Indicates the legal action.

A - represents an Annexation to that city. D - represents a Detachment from that city. V - is used to indicate the annexation was void or withdrawn before an effective date could be declared. 33 - Some older city annexation maps indicate a city boundary declared 'as of February 8, 1933'.

ANNEX_AREA: is the land area annexed or detached, in square miles, per the recorded legal description.

TOTAL_AREA: is the cumulative total land area for each city, arranged chronologically.

SHADE: is used by some of our cartographers to store the color used on printed maps.

INDEXNO: is a matching field used for retrieving documents from our department's document management system.

STATE (Secretary of State): Date filed with the Secretary of State. These are not available for earlier annexations and are Null.

COUNTY (County Recorder): Date filed with the County Recorder. These are not available for earlier annexations and are Null.

EFFECTIVE (Effective Date): The effective date of the annexation or detachment.

CITY: The city to which the annexation or detachment took place.

URL: This text field contains hyperlinks for viewing city annexation documents. See the ArcGIS Help for using the Hyperlink Tool.

FEAT_TYPE: contains the type of feature each polygon represents:

Land - Use this value for your definition query if you want to see only land features on your map. Pier - This value is used for polygons representing piers along the coastline. One example is the Santa Monica Pier. Breakwater - This value is used for polygons representing man-made barriers that protect the harbors. Water - This value is used for polygons representing navigable waters inside the harbors and marinas. 3NM Buffer - Per the Submerged Lands Act, the seaward boundaries of coastal cities and unincorporated county areas are three nautical miles from the coastline. (A nautical mile is 1,852 meters, or about 6,076 feet.) Annexation Maps by City (PDF)Large format, high quality wall maps are available for each of the 88 cities in Los Angeles County in PDF format.Agoura HillsHermosa BeachNorwalkAlhambraHidden HillsPalmdaleArcadiaHuntington ParkPalos Verdes EstatesArtesiaIndustryParamountAvalonInglewoodPasadenaAzusaIrwindalePico RiveraBaldwin ParkLa Canada FlintridgePomonaBellLa Habra HeightsRancho Palos VerdesBell GardensLa MiradaRedondo BeachBellflowerLa PuenteRolling HillsBeverly HillsLa VerneRolling Hills EstatesBradburyLakewoodRosemeadBurbankLancasterSan DimasCalabasasLawndaleSan FernandoCarsonLomitaSan GabrielCerritosLong BeachSan MarinoClaremontLos Angeles IndexSanta ClaritaCommerceLos Angeles Map 1Santa Fe SpringsComptonLos Angeles Map 2Santa MonicaCovinaLos Angeles Map 3Sierra MadreCudahyLos Angeles Map 4Signal HillCulver CityLos Angeles Map 5South El MonteDiamond BarLos Angeles Map 6South GateDowneyLos Angeles Map 7South PasadenaDuarteLos Angeles Map 8Temple CityEl MonteLynwoodTorranceEl SegundoMalibuVernonGardenaManhattan BeachWalnutGlendaleMaywoodWest CovinaGlendoraMonroviaWest HollywoodHawaiian GardensMontebelloWestlake VillageHawthorneMonterey ParkWhittier

Geologic map of the Lancaster West 7.5' quadrangle, Los Angeles County, California. Online geologic map PDF. scale 1:24000

Geospatial data about Los Angeles County Landslide Zones. Export to CAD, GIS, PDF, CSV and access via API.

This layer contains information for locating past and present legal city boundaries within Los Angeles County. The Los Angeles County Department of Public Works provides the most current shapefiles representing city annexations and city boundaries on the Los Angeles County GIS Data Portal. The Department also provides large format city annexation maps (pdf) on its FTP site. True, legal boundaries are only determined on the ground by surveyors licensed in the State of California. Numerous records are freely available at the Land Records Information website, hosted by the Department of Public Works.Principal attributes include:NO: corresponds with numbers on the tables displayed on City Annexation Maps.ANNEX_No: is a text version of the "NO" field listed above. Because this field is only used for the Long Beach and Los Angeles Annexation Maps, this value is null for all other cities.NAME: is the official name under which the annexation was filed.TYPE: is used to indicate which legal action occurred.A - represents an Annexation to that city.D - represents a Detachment from that city.V - is used to indicate the annexation was rendered Void or withdrawn before an effective date could be declared.33 - Some older city annexation maps indicate a city boundary declared 'as of February 8, 1933'.ANNEX_AREA: is the land area annexed or detached, in square miles, per the recorded legal description.TOTAL_AREA:is the cumulative total land area for each city, arranged chronologically.SHADE: is used by some of our cartographers to store the color used on printed maps.INDEXNO: is a matching field used for retriving documents from our department's document management system.STATE (Secretary of State): Date filed with the Secretary of State.COUNTY (County Recorder): Date filed with the County Recorder.EFFECTIVE (Effective Date):The effective date of the annexation or detachment.CITY: The city to which the annexation or detachment took place.FEAT_TYPE: contains the type of feature each polygon represents:Land - Use this value for your definition query if you want to see only land features on your map.Water - Polygons with this attribute value represent internal navigable waters. Examples of internal waters are found in the Long Beach Harbor.3NM Buffer - Per the Submerged Lands Act, the seaward boundaries of coastal cities and unincorporated county areas are three nautical miles (a nautical mile is 1852 meters) from the coastline.

This pipe feature class represents current wastewater information of the mainline sewer in the City of Los Angeles. The Mapping and Land Records Division of the Bureau of Engineering, Department of Public Works provides the most rigorous geographic information of the storm drain system using a geometric network model, to ensure that its storm drains reflect current ground conditions. The conduits and inlets represent the storm drain infrastructure in the City of Los Angeles. Storm drain information is available on NavigateLA, a website hosted by the Bureau of Engineering, Department of Public Works.Associated information about the wastewater Pipe is entered into attributes. Principal attributes include:PIPE_SUBTYPE: pipe subtype is the principal field that describes various types of lines as either Airline, Force Main, Gravity, Siphon, or Special Lateral.For a complete list of attribute values, please refer to (TBA Wastewater data dictionary). Wastewater pipe lines layer was created in geographical information systems (GIS) software to display the location of sewer pipes. The pipe lines layer is a feature class in the LACityWastewaterData.gdb Geodatabase dataset. The layer consists of spatial data as a line feature class and attribute data for the features. The lines are entered manually based on wastewater sewer maps and BOE standard plans, and information about the lines is entered into attributes. The pipe lines are the main sewers constructed within the public right-of-way in the City of Los Angeles. The ends of line segments, of the pipe lines data, are coincident with the wastewater connectivity nodes, cleanout nodes, non-structures, and physical structures points data. Refer to those layers for more information. The wastewater pipe lines are inherited from a sewer spatial database originally created by the City's Wastewater program. The database was known as SIMMS, Sewer Inventory and Maintenance Management System. For the historical information of the wastewater pipe lines layer, refer to the metadata nested under the sections Data Quality Information, Lineage, Process Step section. Pipe information should only be added to the Wastewater Pipes layer if documentation exists, such as a wastewater map approved by the City Engineer. Sewers plans and specifications proposed under private development are reviewed and approved by Bureau of Engineering. The Department of Public Works, Bureau of Engineering's, Brown Book (current as of 2010) outlines standard specifications for public works construction. For more information on sewer materials and structures, look at the Bureau of Engineering Manual, Part F, Sewer Design, F 400 Sewer Materials and Structures section, and a copy can be viewed at http://eng.lacity.org/techdocs/sewer-ma/f400.pdf.List of Fields:STREET: This is the street name and street suffix on which the pipe is located.PIPE_LABEL: This attribute identifies the arc segment between two nodes, which represents the pipe segment. There could be any number of pipes between the same two maintenance holes and at least one. If there is more than one pipe between the same two maintenance holes, then a value other than 'A' is assigned to each pipe, such as the value 'B', 'C', and so on consecutively. Also, when a new pipe is constructed, some old pipes are not removed from the ground and the new pipe is added around the existing pipe. In this case, if the original pipe was assigned an 'A', the new pipe is assigned a 'B'.C_UP_INV: This is the calculated pipe upstream invert elevation value.PIPE_MAT: The value signifies the various materials that define LA City's sewer system. Values: • TCP - Terra Cotta pipe. • CMP - Corrugated metal pipe. • RCP - Reinforced concrete pipe. Used for sewers larger than 42inch, with exceptions. • PCT - Polymer concrete pipe. • CON - Concrete or cement. • DIP - Ductile iron pipe. • ABS - Acrylonitrile butadiene styrene. • STL - Steel. • UNK - Unknown. • ACP - Asbestos cement pipe. • RCL - Reinforced concrete pipe lined. • OTH - Other or unknown. • VCP - Vitrified clay pipe. • TRS - Truss pipe. • CIP - Cast iron pipe. • PVC - Polyvinyl chloride. • BRK - Brick. • RCPL - Lined Reinforced concrete pipe. Used for sewers larger than 42inch, with exceptions. • B/C - Concrete brick pipe. • FRP - Centrifugally cast fiberglass reinforced plastic mortar pipe.DN_INV: This is the downstream invert elevation value.PIPE_WIDTH: This value is the pipe dimension for shapes other than round.C_SLOPE: This is the calculated slope.ENABLED: Internal feature number.DN_STRUCT: This attribute identifies a number at one of two end points of the line segment that represents a sewer pipe. A sewer pipe line has a value for the UP_STRUCT and DN_STRUCT fields. This point is the downstream structure that may be a maintenance hole, pump station, junction, etc. Each of these structures is assigned an identifying number that corresponds to a Sewer Wye data record. The 8 digit value is based on an S-Map index map using a standardized numbering scheme. The S-Map is divided into 16 grids, each numbered sequentially from west to east and north to south. The first three digits represent the S-Map number, the following two digits represent the grid number, and the last three digits represent the structure number within the grid. This field also relates to the (name of table or layer) node attribute table.PIPE_SIZE: This value is the inside pipe diameter in inches.MON_INST: This is the month of the pipe installation.PIPE_ID: The value is a combination of the values in the UP_STRUCT, DN_STRUCT, and PIPE_LABEL fields. This is the 17 digit identifier of each pipe segment and is a key attribute of the pipe line data layer. This field named PIPE_ID relates to the field in the Annotation Pipe feature class and to the field in the Wye line feature class data layers.REMARKS: This attribute contains additional comments regarding the pipe line segment.DN_STA_PLS: This is the tens value of the downstream stationing.EASEMENT: This value denotes whether or not the pipe is within an easement.DN_STA_100: This is the hundreds value of the downstream stationing.PIPE_SHAPE: The value signifies the shape of the pipe cross section. Values: • SE - Semi-Elliptical. • O1 - Semi-Elliptical. • UNK - Unknown. • BM - Burns and McDonald. • S2 - Semi-Elliptical. • EL - Elliptical. • O2 - Semi-Elliptical. • CIR - Circular. • Box - Box (Rectangular).PIPE_STATUS: This attribute contains the pipe status. Values: • U - Unknown. • P - Proposed. • T - Abandoned. • F - As Built. • S - Siphon. • L - Lateral. • A - As Bid. • N - Non-City. • R - Airline.ENG_DIST: LA City Engineering District. The boundaries are displayed in the Engineering Districts index map. Values: • O - Out LA. • V - Valley Engineering District. • W - West LA Engineering District. • H - Harbor Engineering District. • C - Central Engineering District.C_PIPE_LEN: This is the calculated pipe length.OWNER: This value is the agency or municipality that constructed the pipe. Values: • PVT - Private. • CTY - City of LA. • FED - Federal Facilities. • COSA - LA County Sanitation. • OUTLA - Adjoining cities.CRTN_DT: Creation date of the line feature.TRTMNT_LOC: This value is the treatment plant used to treat the pipe wastewater.PCT_ENTRY2: This is the flag determining if the second slope value, in SLOPE2 field, was entered in percent as opposed to a decimal. Values: • Y - The value is expressed as a percent. • N - The value is not expressed as a percent.UP_STA_100: This is the hundreds value of the upstream stationing.DN_MH: The value is the ID of the structure. This point is the structure that may be a maintenance hole, pump station, junction, etc. The field name DN_MH signifies the structure is the point at the downstream end of the pipe line segment. The field DN_MH is a key attribute to relate the pipe lines feature class to the STRUCTURE_ID field in the physical structures feature class.SAN_PIPE_IDUSER_ID: The name of the user carrying out the edits of the pipe data.WYE_MAT: This is the pipe material as shown on the wye card.WYE_DIAM: This is the pipe diameter as shown on the wye card.SLOPE2: This is the second slope value used for pipe segments with a vertical curve.EST_YR_LEV: This value is the year installed level.EST_MATL: This is the flag determining if the pipe material was estimated.LINER_DATE: This value is the year that the pipe was re-lined.LAST_UPDATE: Date of last update of the line feature.SHAPE: Feature geometry.EST_YEAR: This is the flag indicating if the year if installation was estimated.EST_UPINV: This is the flag determining if the pipe upstream elevation value was estimated.WYE_UPDATE: This value indicates whether the wye card was updated.PCT_ENTRY: This is the flag determining if the slope was entered in percent as opposed to a decimal. Values: • N - The value is not expressed as a percent. • Y - The value is expressed as a percent.PROF: This is the profile drawing number.PLAN1: This is the improvement plan drawing number.PLAN2: This is the supplementary improvement plan drawing number.EST_DNINV: This is the flag determining if the pipe downstream elevation value was estimated.UP_STRUCT: This attribute identifies a number at one of two end points of the line segment that represents a sewer pipe. A sewer pipe line has a value for the UP_STRUCT and DN_STRUCT fields. This point is the upstream structure that may be a maintenance hole, pump station, junction, etc. Each of these structures is assigned an identifying number that corresponds to a Sewer Wye data record. The 8 digit value is based on an S-Map index map

This data set maps the soil-slip susceptibility for several areas in southwestern California. Created using Environmental Systems Research Institute's ARC/INFO software, the data base consists of raster maps containing grid cells coded with soil- slip susceptibility values. In addition, the data set includes the following graphic and text products: (1) postscript graphic plot files containing the soil-slip susceptibility map, topography, cultural data, and a key of the colored map units, and (2) PDF and text files of the Readme (including the metadata file as an appendix) and accompanying text, and a PDF file of the plot files. Intense winter rains commonly generated debris flows in upland areas of southwestern California. These debris flows initiate as small landslides referred to as soil slips. Most of the soil slips mobilize into debris flows that travel down slope at varying speeds and distances. The debris flows can be a serious hazard to people and structures in their paths. The soil-slip susceptibility maps identify those natural slopes most likely to be the sites of soil slips during periods of intense winter rainfall. The maps were largely derived by extrapolation of debris-flow inventory data collected from selected areas of southwestern California. Based on spatial analyses of soil slips, three factors in addition to rainfall, were found to be most important in the origin of soil slips. These factors are geology, slope, and aspect. Geology, by far the most important factor, was derived from existing geologic maps. Slope and aspect data were obtained from 10-meter digital elevation models (DEM). Soil-slip susceptibility maps at a scale of 1:24,000 were derived from combining numerical values for geology, slope, and aspect on a 10-meter cell size for 128 7.5' quadrangles and assembled on 1:100,000-scale topographic maps. The resultant maps of relative soil-slip susceptibility represent the best estimate generated from available debris-flow inventory maps and DEM data.

This lateral pipes feature class represents current wastewater information connecting a residence or business to the mainline sewer in the City of Los Angeles. The Mapping and Land Records Division of the Bureau of Engineering, Department of Public Works provides the most rigorous geographic information of the sanitary sewer system using a geometric network model, to ensure that its sewers reflect current ground conditions. The sanitary sewer system, pump plants, wyes, maintenance holes, and other structures represent the sewer infrastructure in the City of Los Angeles. Wye and sewer information is available on NavigateLA, a website hosted by the Bureau of Engineering, Department of Public Works.For a complete list of attribute values, please refer to (TBA Wastewater data dictionary). Wastewater Lateral Pipes lines layer was created in geographical information systems (GIS) software to display the location of wastewater lateral pipes. The laterals lines layer is a feature class in the LACityWastewaterData.gdb Geodatabase dataset. The layer consists of spatial data as a line feature class and attribute data for the features. The lines are entered manually based on wastewater sewer maps and BOE standard plans, and information about the lines is entered into attributes. The lateral lines are constructed from LA City's main sewer connection to the Landbase parcels as shown on the Wye maps. The wastewater lateral pipes lines are inherited from a sewer spatial database originally created by the City's Wastewater program. The database was known as SIMMS, Sewer Inventory and Maintenance Management System. Lateral pipe information should only be added to the Wastewater lateral pipes layer if documentation exists, such as a wastewater map approved by the City Engineer. Sewers plans and specifications proposed under private development are reviewed and approved by BOE. The Department of Public Works, Bureau of Engineering's, Brown Book (current as of 2010) outlines standard specifications for public works construction. For more information on sewer materials and structures, look at the Bureau of Engineering Manual, Part F, Sewer Design, F 400 Sewer Materials and Structures section, and a copy can be viewed at http://eng.lacity.org/techdocs/sewer-ma/f400.pdf.List of Fields:REHABRECORDEDLENGTHLATERALTYPE: This value is the type of lateral line. Values: • Dash - This value is for laterals that were created from a Sewer permit taken out for construction of the lateral. • Solid - This value is for laterals that were constructed when original pipe lines were constructed.MATERIALENABLED: Internal feature number.SHAPE: Feature geometry.LAST_UPDATE: Date of last update of the line feature.USER_ID: The name of the user carrying out the edits of the pipe data.SPECIAL_STRUCTDIAMETEROBJECTID: Internal feature number.CRTN_DT: Creation date of the line feature.ASSETID: User-defined unique feature number that is automatically generated.ATTACHMENTSHAPE_Length: Length of feature in internal units.

SCCWRP and technical partners (Colorado School of Mines and Council for Watershed Health), worked with the State Water Resources Control Board and the Los Angeles Regional Water Quality Control Board, in cooperation with local municipalities (including City of LA Bureau of Sanitation, City of LA Department of Water and Power, LA County Department of Public Works, and LA County Sanitation Districts), to conduct the Los Angeles River Environmental Flows Project (Project). The goals of the project were to develop a process for establishing flow criteria, to apply the process to provide recommendations for flow criteria in the LA River, and to produce tools and approaches to evaluate management scenarios necessary to achieve recommended flow criteria. The project also serves as an important pilot application of the California Environmental Flows Framework (CEFF) by demonstrating how CEFF can be applied in a highly urbanized watershed where flow alteration is primarily caused by treated wastewater and stormwater discharges. The outcomes of this project may also serve as a model for assessing similar situations in other river systems.

For more information about this project, go to the project website: https://www.sccwrp.org/about/research-areas/ecohydrology/los-angeles-river-flows-project/

A full description of the methods and datasets are described in the Aquatic Life Use Assessment technical report: https://ftp.sccwrp.org/pub/download/DOCUMENTS/TechnicalReports/1154_LARiverAquaticLifeUses.pdf

Geospatial data about Los Angeles County Liquefaction Zones. Export to CAD, GIS, PDF, CSV and access via API.

This feature class represents current stormwater conduits within the City of Los Angeles. This conduit is used in conjunction with a pumping station. The Mapping and Land Records Division of the Bureau of Engineering, Department of Public Works provides the most rigorous geographic information of the storm drain system using a geometric network model, to ensure that its storm drains reflect current ground conditions. The conduits and inlets represent the storm drain infrastructure in the City of Los Angeles. Storm drain information is available on NavigateLA, a website hosted by the Bureau of Engineering, Department of Public Works.For a complete list of attribute values, please refer to (TBA Stormwater data dictionary).Stormwater conduit lines layer was created in geographical information systems (GIS) software to display the location of stormwater drainage pipes. The layer consists of spatial data as line features and attribute data for the features. The lines are entered manually based on stormwater maps, and information about the lines is entered into attributes. The Stormwater Network dataset is a geometric network, with a collection of conduit lines and inlet points having a connectivity relationship. Thus, editing the location of an conduit line affects the location of the connected inlet point, and vice versa. Conduit plans and specifications proposed under private development are reviewed and approved by City of Los Angeles, Department of Public Works, Bureau of Engineering. For more information on conduit materials and structures, look at the Bureau of Engineering Manual, Part G, Storm Drain Design, G 600 Storm Drain Structures section, and a copy can be viewed at http://eng.lacity.org/techdocs/stormdr/g600.pdf, or at http://eng.lacity.org, click Technical Info, click Technical Document Center, click Storm Drain Design Manual Part G, click G 600 Storm Drain Structures.

Geospatial data about Los Angeles County Cellular Towers. Export to CAD, GIS, PDF, CSV and access via API.

This physical structures points feature class represents current wastewater information in the City of Los Angeles. The maintenance hole structure is used to provide access to the sewer from the surface. The Mapping and Land Records Division of the Bureau of Engineering, Department of Public Works provides the most rigorous geographic information of the sanitary sewer system using a geometric network model, to ensure that its sewers reflect current ground conditions. The sanitary sewer system, pump plants, wyes, maintenance holes, and other structures represent the sewer infrastructure in the City of Los Angeles. Wye and sewer information is available on NavigateLA, a website hosted by the Bureau of Engineering, Department of Public Works.Associated information about the wastewater Physical_structure is entered into attributes. Principal attributes include:JUNCTION_SUBTYPE: junction subtype is the principal field that describes various types of points as either Diversion Structure, Drop or Drop Trap, Flush, Junction Chamber, Junction Structure, Maintenance, Offset, Other Structure, Siphon, Special Shallow, Special Structure, Terminal, Transition, Trap, Valve Vault, Weir. For a complete list of attribute values, please refer to (TBA Wastewater data dictionary). Wastewater Physical Structures points layer was created in geographical information systems (GIS) software to display the location of wastewater structures. The structures points layer is a feature class in the LACityWastewaterData.gdb Geodatabase dataset. The layer consists of spatial data as a points feature class and attribute data for the features. The points are entered manually based on wastewater sewer maps and BOE standard plans, and information about the points is entered into attributes. The physical structures points data layer differs from non-structures points data layer, such that physical structures points are maintenance holes. Reference the JUNCTION_SUBTYPE and MH_TYPE field for the type of structure. The STRUCTURE_ID field value is the unique ID. The wastewater structures points are inherited from a sewer spatial database originally created by the City's Wastewater program. The database was known as SIMMS, Sewer Inventory and Maintenance Management System. Structures information should only be added to the Wastewater Structures layer if documentation exists, such as a wastewater map approved by the City Engineer. Sewers plans and specifications proposed under private development are reviewed and approved by Bureau of Engineering. The Department of Public Works, Bureau of Engineering's, Brown Book (current as of 2010) outlines standard specifications for public works construction. For more information on sewer materials and structures, look at the Bureau of Engineering Manual, Part F, Sewer Design section, and a copy can be viewed at http://eng.lacity.org/techdocs/sewer-ma/f400.pdf. For more information on maintenance holes, a copy can be viewed at http://boemaps.eng.ci.la.ca.us/reports/pdf/s140-0_std_pl.pdf.List of Fields:SERVICEID: User-defined unique feature number that is automatically generated.OBJECTID: Internal feature number.FACILITY_NO: This field is currently not being edited.ENG_DIST: LA City Engineering District. The boundaries are displayed in the Engineering Districts index map. Values: • W - West LA Engineering District. • H - Harbor Engineering District. • C - Central Engineering District. • V - Valley Engineering District.CNCL_DIST: LA City Council District. Values: • (numbers 1-15) - Current City Council Member for that District can be found on the mapping website http://navigatela.lacity.org/index.cfm, click Council Districts layer name, under Boundaries layer group.CRTN_DT: Creation date of the point feature.MDIST: This value is the maintenance district identifier. Bureau of Sanitation needs to provide BOE with updated definitions. This field is currently not being edited.LAT: The value is the latitude coordinate of the point.USER_ID: The name of the user carrying out the edits of the structure data.LON: The value is the longitude coordinate of the point.NAME: This field is currently not being edited.VDATUM: This is the year of the standard plan, which contains the information the user enters into pipe data.MHMATERIAL: The value is the material that the structure is made from. This information is not specified on the standard plan. Values: • UNK - Unknown. • RCP - Reinforced Concrete Pipe. • CSP - Corrugated Steel Pipe. • CIPC - Cast in place concrete. • C - Concrete. • BRK - Brick. • PRC - Precast Reinforced Concrete. • B - Brick. • CON - Concrete. • VCP - Vitrified Clay Pipe. • O - Other. • P - Plastic.BLKNO: The value is the block number of the street on which the physical structure is located.STREET2: The value is the cross street name on which the physical structure hole is located, if applicable.COVERDIAM: The value diameter of the physical structure cover expressed in feet.BARRELDIAM: The value diameter of the inside of the physical structure expressed in feet.STATUS: This value is the active or inactive status of the structure. Values: • ABAN - Proposed Inactive. • PROP_ACT - Proposed Active. • INACT - Inactive. • ACT - Active. • ABAN - Abandoned.SEQ: The value is the sequence number of the maintenance hole.SHAPE: Feature geometry.STREET1: The value is the street name on which the physical structure is located.MH_BASE: The value is the non-structure base, used by Bureau of Sanitation to describe the direction of flow at the intersection of a pipe and a non-structure. Values: • F - F. • B - B. • G - G. • H - H. • Q - Q.MH_TYPE: The value signifies the maintenance hole type or other structure type. Values: • DMH - Drop Maintenance Hole. • CFS - Confluence Structure. • DMT - Drop trap Maintenance Hole. • ABN - Abandoned. • BPS - Bypass Structure. • DI - Diversion Structure. • SH - Shallow Maintenance Hole. • OMH - Offset Maintenance Hole. • RV - Relief Valve. • SIP - Siphon. • VV - Valve vault. • LH - Lamp Hole. • FL - Flush Station. • GV - Gate Valve. • TRP - Trap maintenance hole. This type of structure is used to prevent sewer gases from flowing upstream in the sewer line. • HD - Transition. • TRS - Transition structure. • FT - Flush Tank. • WMH - Weir maintenance hole. This type of structure is used to gauge sewer flows. Automatic recording devices may be installed for flow measurement. • INA - Inactive. • MH - Maintenance Hole. • OTH - Other structure. • FS - Flush Station. • WW - Wet well. • JT - Junction Chamber Trap. • JC - Junction Chamber. • PMH - Pressure Maintenance Hole. • PS - Pump Station. • FMH - Flush Maintenance Hole. • TMH - Terminal maintenance hole. • GS - Gauging Structure. • JS - Junction Structure.LID_ELEV: The value is the lid elevation of the structure, in decimal feet.BASIN: The value is basin number.OWNER: This value is the agency or municipality that constructed the physical structure. Values: • CTY - City of LA. • FED - Federal Facilities. • OUTLA - Adjoining cities. • COSA - LA County Sanitation. • PVT - Private.COMMENTS: This attribute contains comments of structures and structure status.MH_DEPTH: The value is the depth of the physical structure expressed in decimal feet.JUNCTION_SUBTYPE: The value is the type of physical structure. Values: • 1 - Maintenance. • 4 - Offset. • 15 - Valve Vault. • 6 - Diversion Structure. • 8 - Flush. • 9 - Junction Chamber. • 5 - Trap. • 7 - Special Shallow. • 3 - Terminal. • 10 - Siphon. • 13 - Junction Structure. • 16 - Transition. • 2 - Drop or Drop Trap. • 11 - Weir. • 12 - Special Structure. • 14 - Other Structure.LAST_UPDATE: Date of last update of the point feature.YEAR_INST: This is the year of the structure installation.ROUTE: The value is the sewer maintenance route number.ADDRESS: This field is currently not being edited.ENABLED: Internal feature number.STRUCTURE_ID: The value is the ID of the structure. It could be either the value from the UP_STRUCT or DN_STRUCT fields. This point is the structure that may be a maintenance hole, junction, siphon, etc. The field STRUCTURE_ID is a key attribute to relate the physical structures feature class to the UP_MH field or the DN_MH field in pipe lines feature class.ASSETID: User-defined unique feature number that is automatically generated.

Adult respondents 18+ who walked for transportation or leisure for at least 150 minutes in the past week. Years covered are from 2013-2014 by zip code. Data taken from the California Health Interview Survey Neighborhood Edition (AskCHIS NE) (http://askchisne.ucla.edu/), downloaded February 2018.AskCHIS Neighborhood Edition is an online data dissemination and visualization platform that provides health estimates at sub-county geographic regions. Estimates are powered by data from The California Health Interview Survey (CHIS). CHIS is conducted by The UCLA Center for Health Policy Research, an affiliate of UCLA Fielding School of Public Health.Health estimates available in AskCHIS NE (Neighborhood Edition) are model-based small area estimates (SAEs).SAEs are not direct estimates (estimates produced directly from survey data, such as those provided through AskCHIS).CHIS data and analytic results are used extensively in California in policy development, service planning and research, and is recognized and valued nationally as a model population-based health survey.Before using estimates from AskCHIS NE, it is recommended that you read more about the methodology and data limitations at: http://healthpolicy.ucla.edu/Lists/AskCHIS%20NE%20Page%20Content/AllItems.aspx. You can go to http://askchisne.ucla.edu/ to create your own account.Produced by The California Health Interview Survey and The UCLA Center for Health Policy Research and compiled by the Los Angeles County Department of Public Health. "Field Name = Field Definition"Zipcode" = postal zip code in the City of Los Angeles “Percent” = adults ages 18+ who walked for transportation or leisure for at least 150 minutes in the past week"LowerCL" = the lower 95% confidence limit represents the lower margin of error that occurs with statistical sampling"UpperCL" = the upper 95% confidence limit represents the upper margin of error that occurs in statistical sampling "Population" = estimated population 18 and older (denominator) residing in the zip code Notes: 1) Zip codes are based on the Los Angeles Housing Department Zip Codes Within the City of Los Angeles map (https://media.metro.net/about_us/pla/images/lazipcodes.pdf).2) Zip codes that did not have data available (i.e., null values) are not included in the dataset; there are additional zip codes that fall within the City of Los Angeles.3) Zip code boundaries do not align with political boundaries. These data are best viewed with a City of Los Angeles political boundary file (i.e., City of Los Angeles jurisdiction boundary, City Council boundary, etc.) FAQS: 1. Which cycle of CHIS does AskCHIS Neighborhood Edition provide estimates for?All health estimates in this version of AskCHIS Neighborhood Edition are based on data from the 2013-2014 California Health Interview Survey. 2. Why do your population estimates differ from other sources like ACS? The population estimates in AskCHIS NE represent the CHIS 2013-2014 population sample, which excludes Californians living in group quarters (such as prisons, nursing homes, and dormitories). 3. Why isn't there data available for all ZIP codes in Los Angeles?While AskCHIS NE has data on all ZCTAs (Zip Code Tabulation Areas), two factors may influence our ability to display the estimates:A small population (under 15,000): currently, the application only shows estimates for geographic entities with populations above 15,000. If your ZCTA has a population below this threshold, the easiest way to obtain data is to combine it with a neighboring ZCTA and obtain a pooled estimate.A high coefficient of variation: high coefficients of variation denote statistical instability.

Click here to download shapefile to import into mapping software (zipped)Click here to download attached commentsClick here to download map (PDF)